Best Rolling Jack For 4 Post Lift: Compare 7 Bridge Jacks

#1 · Best Overall

1. APlusLift ARJ-60

• Load Capacity: 6000 lb
• Dimensions: 40 x 24 x 11 in
• Weight: 240 lb
• Compatible with Vehicle Type: ATV, Car, Sport Utility Vehicle, Tractor…

Best for: Air-powered service across varied lifts.

Why it ranks #1: Its 6,000-pound capacity, air operation, and 27-to-623⁄8-inch adjustable extensions suit a broad range of service and storage lifts.

A 1/8-inch minimum lifting height gives the APlusLift ARJ-60 a low starting point for positioning beneath a vehicle on a four-post lift. Its 6,000-pound capacity, air operation, and adjustable-width arms make it suited to wheel and brake work across service and storage lift setups.

The long arms adjust from 27 to 62 3/8 inches, helping accommodate different lift widths, while the adjustable screw pads provide positioning at the vehicle contact points. Two included 2 3/4-inch truck adapters add height when needed. Air operation and the included air pump support powered lifting, and the 6,000-pound capacity covers the product's stated load limit. The listed vehicle types include cars, SUVs, trucks, trailers, tractors, ATVs, and UTVs.

Skip it if you need a manual hand-pump jack; the TRIUMPH SJ35 uses a manual hydraulic pump instead of air operation.

Choose this APlusLift for air-operated front- or rear-wheel service when adjustable width and a low minimum height suit your four-post lift. Its 6,000-pound capacity is the load boundary, and operation depends on an air supply.

Listed on Amazon as: APlusLift ARJ-60 6000LB Air Operated Rolling Jack for 4-Post Car Lift

#2 · Broad Lift Fit

2. APlusLift ABJ-40

• Load Capacity: 4000 lb
• Dimensions: 40 x 24 x 11 in
• Weight: 300 lb
• Compatible with Vehicle Type: All Terrain Vehicle, Car, Sport Utility…

Best for: Air-powered jack for broad lift widths.

Why it ranks #2: The 4,000-pound air-operated jack has 27-to-623⁄8-inch adjustable extensions and is described as fitting almost all service and storage lifts.

Arm extensions adjustable from 27 to 62 3/8 inches help the APlusLift ABJ-40 fit a broad range of service and storage lift widths. Its air operation and 4,000-pound capacity support front- or rear-end wheel and brake service, while included truck adapters add height for suitable lifting tasks.

The telescoping arms adjust across the stated 27-to-62 3/8-inch range, helping position the bridge jack on different-width lifts. Adjustable screw pads give the operator adjustable vehicle contact points, and two 2 3/4-inch truck adapters provide added height. Air operation powers lifting for front- or rear-side service, with a 1/8-inch minimum lifting height and 4,000-pound capacity defining its operating range. The listed vehicle types include cars, SUVs, trucks, trailers, tractors, ATVs, and UTVs.

Skip it if you need a manual hydraulic pump; the ATLAS XH-PROJACK35 is hand-pump operated and does not rely on air operation.

Choose the ABJ-40 for air-powered wheel and brake work when its adjustable arm range suits the lift and 4,000-pound capacity covers the vehicle. Its air supply requirement is the key operating boundary.

Listed on Amazon as: APlusLift ABJ-40 4000LB Air Operated Sliding Bridge Jack with Rolling Kits

#3 · Highest Capacity

3. KATRAX 7000 lb Jack

• Load Capacity: 7000 lb
• Dimensions: 25 x 41 x 15 in
• Weight: 441 lb
• Compatible with Vehicle Type: Car

Best for: Higher-capacity heavy-vehicle lifting.

Why it ranks #3: Its listed 7,000-pound capacity tops this group, while the 5.3-inch minimum height and 18.3-inch maximum with adapter cover a wide height range.

A 7,000-pound rated capacity sets the KATRAX rolling jack apart for buyers lifting heavier vehicles on four-post lifts. Its 5.3-inch minimum working height and 18.3-inch maximum height with an adapter provide a broad stated height range for different lifting needs.

The 7,000-pound capacity is listed for vehicles including SUVs, pickups, and commercial vehicles, giving this jack a higher stated load limit than lower-capacity options. Its 5.3-inch minimum working height supports positioning beneath vehicles with limited clearance, while the adapter raises maximum height to 18.3 inches. The product description identifies high-pressure pneumatic hydraulic power and high-strength steel construction, so operation uses powered hydraulics rather than a manual hand pump.

Skip it if you prioritize moving a lighter jack; the APlusLift ARJ-60 has a listed item weight of 240 pounds versus this jack's 441 pounds.

Choose the KATRAX for four-post lift work where its 7,000-pound capacity and 18.3-inch adapter-assisted reach suit the vehicle. Its 5.3-inch minimum height and 441-pound item weight are practical fit and handling considerations.

Listed on Amazon as: 7000 lbs Heavy Duty Universal Jack for All Four Post Lifts High Pressure Hydraulic Power Maximum Height with Adapter Can Reach 18.3 Inches

#4 · KT-4H Fit

4. KATOOL RJ-50W

• Load Capacity: 5000 lb
• Dimensions: 25 x 41 x 15 in
• Weight: 441 lb
• Compatible with Vehicle Type: Car

Best for: KATOOL lift owners needing wheel service.

Why it ranks #4: It is specifically listed for KT-4H110 and 4H850 lifts, with 5,000-pound capacity, three locking height positions, and a hydraulic hand pump.

A 5.3-inch lowered pad height lets the KATOOL RJ-50W slide beneath low-clearance vehicles for lifting on compatible four-post lifts. Its 5,000-pound capacity and three locking height positions support front- or rear-wheel and brake work, while included adapters extend maximum pad height to 18.3 inches.

The hydraulic hand pump provides a manual way to raise a vehicle, and two large rubber pads form the vehicle contact points. Four pulleys let the jack roll along the lift, supporting repositioning for front- or rear-end service. Its 5.3-inch lowered height and included adapters, which bring maximum pad height to 18.3 inches, offer a useful range for different lifting needs. Compatibility is specifically listed for KATOOL KT-4H110 and 4H850 lifts.

Skip it if you need a jack for a different lift brand; this model is specified for KATOOL KT-4H110 and 4H850 lifts.

KATOOL KT-4H110 or 4H850 owners seeking a rolling jack for wheel and brake service get manual hydraulic lifting, rubber contact pads, and useful height range. Its stated lift compatibility is the key boundary.

Listed on Amazon as: Rolling Jack Bridge Jack for KT-4H110/4H850 Four Post Lifts with 5000Lbs Lifting Capacity

#5

5. BendPak RJ45LP

• Load Capacity: 4500 lb
• Dimensions: 42 x 24 x 10 in
• Weight: 306 lb
• Compatible with Vehicle Type: Car

Best for: BendPak HD-9 low-profile setups.

Why it ranks #5: The 4,500-pound low-profile bridge jack is designed for BendPak HD-9 series lifts and includes easy-roll wheels and stackable adapters.

The RJ45LP's low-profile minimum drive-over height helps keep clearance demands down on a BendPak HD-9 series four-post lift. Its 4,500-pound capacity and easy-roll wheels support positioning for service work, while rubber contact pads and stackable adapters provide vehicle contact and added lifting height.

BendPak specifies the RJ45LP for its HD-9 series four-post car lift, so buyers can match this bridge jack to that lift family rather than treating it as universal. Easy-roll wheels support movement along the lift, and the low-profile design helps with drive-over clearance. A high-pressure hydraulic power unit raises the load; rubber contact pads and stackable adapters provide the contact and height-adjustment components. Capacity is limited to 4,500 pounds.

Skip it if you own a lift outside the BendPak HD-9 series; the APlusLift ARJ-60 lists adjustable width to fit almost all service and storage lifts.

BendPak HD-9 owners seeking a low-profile rolling bridge jack for service work get easy-roll wheels, hydraulic power, and stackable adapters. The 4,500-pound capacity and HD-9 compatibility define its fit.

Listed on Amazon as: BendPak RJ45LP – 4500lb Capacity – Rolling Bridge Jack Low Profile Design Accessory HD-9 Series Four-Post Car Lift

#6

6. Triumph SJ35

• Load Capacity: 3500 lb
• Dimensions: 24 x 39 x 16.5 in
• Weight: 350 lb
• Compatible with Vehicle Type: Car

Best for: Triumph storage-lift wheel service.

Why it ranks #6: This manual hydraulic 3,500-pound jack fits specified Triumph models, but its approximately 38-inch runway-spacing requirement and limited brand fit narrow its use.

A 4.75-inch lowered pad height lets the Triumph SJ35 start beneath vehicles on a compatible four-post lift. Its manual hydraulic pump, 3,500-pound capacity, and three locking height positions support controlled lifting for wheel or brake work, with adapters raising the maximum pad height to 16.5 inches.

The manual hydraulic pump provides the lifting operation without an air-operated system, while three locking height positions give the operator set positions during use. The lowered pad height is 4.75 inches and maximum height reaches 16.5 inches with adapters, offering a defined adjustment range. This jack requires approximately 38 inches between runways and is listed for current Triumph 8,000-pound four-post parking storage lifts, NSS8SQ Classic, NSS8, and NSS8XLT models.

Skip it if you need verified compatibility beyond the listed Triumph models; the KATOOL RJ-50W names its KT-4H110 and 4H850 lift models.

Owners of listed Triumph storage lifts wanting manual hydraulic lifting for wheel service can consider the SJ35, provided runway spacing is approximately 38 inches. Its 3,500-pound capacity and stated model fit are important boundaries.

Listed on Amazon as: Triumph SJ35 Bridge Jack Lift 3500 lbs for Four Post Auto Lift

#7

7. Atlas XH-PROJACK35

• Load Capacity: 3500 lb
• Dimensions: 23 x 37 x 10 in
• Weight: 350 lb
• Compatible with Vehicle Type: Truck

Best for: Atlas lift owners preferring manual control.

Why it ranks #7: Its 3,500-pound capacity and adjustable width suit many four-post lifts, but the description emphasizes Atlas Garage Pro models rather than broad compatibility.

A scissor mechanism lets the Atlas XH-PROJACK35 lift level, making it a practical match for buyers prioritizing balanced vehicle support during service. Its manual hand pump, 3,500-pound capacity, adjustable width, and included four-piece truck adapter set support wheel-service tasks on compatible four-post lifts.

The hand-pump operation avoids reliance on an air-powered system, while the scissor mechanism is specifically described as allowing level lifting. Adjustable width helps the jack fit many four-post lifts, and the four-piece truck adapter set adds components for truck lifting. Atlas identifies the RJ-35 as a match for the Garage Pro 8000 and Garage Pro 9000, so those models offer the clearest stated compatibility rather than a universal fit claim.

Skip it if you need air-powered lifting; the APlusLift ABJ-40 is an air-operated sliding bridge jack with rolling kits.

Atlas Garage Pro 8000 or 9000 owners seeking manual, level lifting for wheel service may value the adjustable width and truck adapters. The stated 3,500-pound capacity and named lift compatibility bound its use.

Listed on Amazon as: Atlas Automotive XH-PROJACK35 3,500 Capacity Sliding Bridge Jack