Best Center Jack For Motorcycle: Compare 10 Scissor Lifts

#1 · Best Overall

1. VIVOHOME Wide-Deck Scissor Jack

• Load Capacity: 1100 lb
• Material: Alloy Steel
• Weight: 12.5 kg

Best for: Wide-deck garage maintenance.

Why it ranks #1: Its 1100-pound capacity, 3.5-to-14.5-inch lift range, wide anti-slip platform and adjustable screw adapters suit varied motorcycle maintenance.

A 3.5-to-14.5-inch lifting range gives the VIVOHOME scissor jack room to raise a bike for engine, transmission, or wheel work. Its 1,100-pound capacity also covers the motorcycles and ATVs identified in the listing, while a wide anti-slip platform provides a stable contact area during routine garage maintenance.

The reinforced crank handle operates lifting and lowering, so you can adjust height by hand while working through service tasks. Adjustable screw adapters help balance the jack on uneven floors, a useful feature when the garage surface is not perfectly level. The steel scissor construction supports loads up to 1,100 pounds, and the stated 3.5-to-14.5-inch range lets you choose a working height rather than relying on one fixed lift position.

Skip it if you need more than 14.5 inches of lift; this jack’s stated range ends there.

Choose this VIVOHOME for motorcycle or ATV jobs that benefit from a wide platform, controlled crank operation, and adjustable leveling. Its 14.5-inch height ceiling is the key boundary to consider before planning higher-clearance service.

Listed on Amazon as: VIVOHOME 1100 LBS Motorcycle Lift Scissor Jack, Wide Deck Hoist Stand, Red

#2 · T-Handle Option

2. Orion Motor Tech Crank Jack

• Load Capacity: 1100 lb
• Material: 1045 Carbon Steel, Rubber
• Weight: 27.8 lb

Best for: Socket-assisted manual lifting.

Why it ranks #2: The 1100-pound jack lifts from 3.7 to 14.6 inches and can be operated with its T-handle or a 3/8-inch socket and ratchet.

The OMT motorcycle jack can be operated with its T-handle or a 3/8-inch socket and ratchet wrench, giving buyers two manual ways to raise a bike. Its 3.7-to-14.6-inch range and 1,100-pound capacity suit maintenance on cruisers, dirt bikes, and other motorcycles named in the listing.

The T-handle offers a dedicated way to operate the jack, while the 3/8-inch socket option lets a buyer use a ratchet wrench for raising. The stated 3.7-to-14.6-inch range provides adjustable working height, and the 1,100-pound capacity supports the listed motorcycle use. Orion Motor Tech recommends manual operation to extend screw life and prevent wear, so the socket option does not make this a powered lift.

Skip it if you want to use powered lifting; Orion Motor Tech recommends manual operation to limit screw wear.

This OMT suits riders who want adjustable manual lifting and a choice of T-handle or socket operation for motorcycle maintenance. Keep its manual-operation recommendation in mind if your workflow depends on powered tools.

Listed on Amazon as: OMT Motorcycle Lift, 1100lb Crank Hoist Stand with T Handle, 3/8" Socket

#3 · Safety-Pin Design

3. VEVOR Wide-Deck Scissor Jack

• Load Capacity: 1100 lb
• Material: Steel
• Weight: 26 lb

Best for: Pin-secured touring-bike lifting.

Why it ranks #3: This 1100-pound steel center jack has a wide deck and safety pin, with a specified lifting range of 3.7 to 13.8 inches.

A safety pin and 1,100-pound capacity make the VEVOR M110201 a center-lift option for street, cruiser, and adventure touring motorcycles. Its 3.7-to-13.8-inch height range supports hands-on maintenance and cleaning, while the crank-operated scissor design lets you raise the bike without extra tools.

The stated fit for street bikes, cruisers, and touring motorcycles gives this jack a clear garage role across several common motorcycle types. Its 1,100-pound capacity supports substantial loads, and the safety pin adds a locking step after lifting. The 3.7-to-13.8-inch range provides adjustable working height for cleaning or maintenance; the listed no-extra-tools operation keeps the lifting workflow straightforward. Its without-casters configuration suits buyers who do not need a wheeled stand.

Skip it if you need a lift higher than 13.8 inches; the VIVOHOME VH012 reaches 14.5 inches.

This VEVOR suits riders who want a pin-secured center jack for street, cruiser, or touring-bike cleaning and maintenance. Check that its 13.8-inch maximum height meets your working-clearance needs before choosing it.

Listed on Amazon as: VEVOR Motorcycle Lift, 1100 LBS Motorcycle Scissor Lift Jack with Wide Deck & Safety Pin, 3.7"-13.8" Center Hoist Crank Stand, Steel Scissor Jack for Street Bikes, Cruiser Bikes, Touring Motorcycles

#4 · Tallest Listed Lift

4. Black Widow Tire Jack

• Load Capacity: 1100 lb
• Material: Steel
• Weight: 32 lb

Best for: High-clearance tire service.

Why it ranks #4: It supports 1100 pounds and lifts from 3.75 to 16.25 inches, with removable adapters adding 2 to 3.25 inches of height.

A lift range reaching 16.25 inches gives the Black Widow MC-JACK useful height for front- or rear-tire work on many motorcycles. Its 1,100-pound capacity supports the listed off-road, street-cruiser, and street-sport categories, while removable adapters add another 2 to 3.25 inches of height.

The 3.75-to-16.25-inch range lets riders set a working height for tire service, and the removable adapters provide additional height when the job calls for it. Rubber-padded lift surfaces help prevent slipping as the bike is supported. Heavy-duty steel forms the jack’s structure, and its powder-coated finish is specified to resist rust and wear. At 32 pounds, it is a substantial stand to position in a garage or shop.

Skip it if you want a lighter jack to move repeatedly; the Black Widow weighs 32 pounds.

Choose this Black Widow for tire-focused work where the tall stated range and removable adapters help set working height. Its 32-pound weight is worth considering if the jack must be carried or repositioned often.

Listed on Amazon as: Black Widow Steel Motorcycle Tire Jack, 3.75 to 16.25 In Lift, 1,100 lb

#5

5. VIVOHOME Center Scissor Jack

• Load Capacity: 1100 lbs
• Material: Carbon Steel
• Weight: 30 lb

Best for: Stable, easy-clean center lifting.

Why it ranks #5: Its 1100-pound capacity, rubberized striped top pad, and three-inch base wings provide useful listed features for motorcycle and ATV lifting.

Three-inch wings on each side of the base strengthen the VIVOHOME VH326’s stability, giving garage users a broader stance while lifting. The 1,100-pound center scissor jack also has safety pins and a striped rubber top pad, combining a locking feature with a surface intended to resist slipping.

The winged base addresses stability, while safety pins provide an additional securing feature during lifting. A striped rubber pad helps prevent slippage at the top contact surface. The carbon-steel structure has an oil-, grease-, and rust-resistant coating, which the listing says is easier to clean after repairs. Its stated compatibility includes motorcycles, ATVs, snowmobiles, and UTVs, making it relevant to buyers maintaining more than one type of vehicle.

Skip it if you need a jack that is easy to carry from job to job; this model weighs 30 pounds.

This VIVOHOME suits garage owners who value a winged base, safety pins, and a finish that is easier to clean after repairs. Its 30-pound weight is a consideration when moving it between storage and work areas.

Listed on Amazon as: VIVOHOME Motorcycle Lift 1100 LBS Center Scissor Lift Jack

#6

6. VEVOR Saddle Scissor Jack

• Load Capacity: 1100 lb
• Material: High Carbon Steel
• Weight: 28.2 lb

Best for: Saddle-and-pin garage lifting.

Why it ranks #6: This 1100-pound high-carbon-steel jack includes a saddle and safety pin, making it a purpose-built center-lift option for motorcycles.

The included saddle and safety pin give this VEVOR scissor jack a defined support-and-locking setup for motorcycle maintenance. Rated for 1,100 pounds, it is listed for street bikes, cruisers, and touring motorcycles, making it a practical choice for riders who want a center lift with a pin-secured platform.

The saddle provides the named support surface, while the safety pin offers a locking step once the motorcycle is raised. Together, those features suit a maintenance workflow where the jack must support the bike during cleaning or service. High-carbon steel construction and the 1,100-pound rating identify its load-bearing foundation. The listing names street, cruiser, and touring motorcycles as intended vehicle types, so buyers can assess its stated scope against their own bike.

Skip it if you need a lightweight stand to carry between locations; this VEVOR weighs 28.2 pounds.

This VEVOR fits riders seeking a saddle-equipped center jack with a safety pin for garage maintenance on street, cruiser, or touring motorcycles. Consider its 28.2-pound weight if you will move it often.

Listed on Amazon as: VEVOR Motorcycle Lift, 1100 LBS Motorcycle Center Scissor Lift Jack with Saddle & Safety Pin, Steel Motorcycle Jack Hoist Stand for Street Bikes, Cruiser Bikes, Touring Motorcycles

#7

7. ZENY Saddle Scissor Jack

• Load Capacity: 1100 lb
• Material: Steel
• Weight: 12.6 kg

Best for: Saddle-equipped adjustable lifting.

Why it ranks #7: It offers 1100-pound capacity, a 3.5-to-14.5-inch lift range, a saddle and safety pin for motorcycle, ATV or dirt-bike use.

A 3.5-to-14.5-inch range lets the ZENY center scissor jack raise a motorcycle to a chosen working height, with a stated 1,100-pound capacity. Its saddle and safety pin add defined support and a locking feature for garage, shop, or track maintenance.

The adjustable height range supports varied working positions, while the saddle gives the jack its specified support surface. A safety pin adds a securing step after lifting. Its steel structure has a red-and-black powder coating described as resistant to oil, grease, dirt, and rust, a useful consideration around repair work. The listing also identifies the jack for use in a garage, shop, or at the track, rather than limiting it to one setting.

Skip it if you want a lightweight jack to carry frequently; this ZENY weighs 12.6 kilograms.

This ZENY suits riders who want adjustable center lifting with a saddle and safety pin for shop, garage, or track work. Factor in its 12.6-kilogram weight if you need to transport it often.

Listed on Amazon as: ZENY Motorcycle Lift, Motorcycle Center Scissor Lift Jack with Saddle & Safety Pin, 1100 LBS Capacity Steel Jack Hoist Stand for Motorcycles, ATVs, Dirt Bike

#8

8. ZENY Wide-Deck Scissor Jack

• Load Capacity: 1100 lb
• Material: Alloy Steel
• Weight: 28 lb

Best for: Wide-platform crank lifting.

Why it ranks #8: Its 1100-pound capacity and 14.5-by-9-inch rubber-surfaced platform provide a broad contact area for garage, shop or track use.

A 14.5-by-9-inch platform gives the ZENY scissor jack a broad contact area for lifting motorcycles, dirt bikes, or scooters. Its 1,100-pound capacity and simple crank operation make it a garage, shop, or track option for buyers who want a straightforward center stand with a rubberized surface.

The nine-inch-wide deck has a rubber surface specified to help prevent slippage and scratching, giving the bike a broad padded contact area. A simple crank raises the stand, keeping the operating method direct for workshop or trackside maintenance. Alloy-steel construction supports the stated 1,100-pound capacity. The listing describes the stand as fitting most motorcycle models, while its 14.5-by-9-inch platform dimensions help buyers assess the available support area.

Skip it if you need a lighter stand for frequent transport; this ZENY weighs 28 pounds.

Consider this ZENY for garage, shop, or track use where a wide rubberized platform and simple crank suit routine lifting. Its 28-pound weight may matter if portability is a priority.

Listed on Amazon as: ZENY 1100 LB Wide Deck Motorcycle Center Scissor Lift Jack Repair Hoist Stand Bikes ATVs,Motorcycle Dirt Bike Scooter Crank Stand

#9 · Highest Capacity

9. SHMQYSY 1500-Pound Floor Jack

• Load Capacity: 1500 lb
• Material: Carbon Steel
• Weight: 34.2 lb

Best for: Heavy-load rubber-pad lifting.

Why it ranks #9: Its 1500-pound rating is the highest listed here, with thick rubber pads and an anti-slip base, though no lift range is specified.

A 1,500-pound capacity sets the SHMQYSY MT1500LBYZ apart for buyers lifting heavier motorcycles or an ATV. Its upgraded bearing is specified to reduce friction for smoother, easier raising, while a thick 0.48-inch top rubber pad helps protect the bike’s contact surface during lifting.

The carbon-steel floor jack combines its 1,500-pound rating with an upgraded bearing intended to reduce the effort of lifting heavy motorcycles. That bearing can make repeated height adjustments less laborious during maintenance. A 0.48-inch top rubber pad helps prevent scratches at the lifting contact, while anti-slip rubber on the bottom helps protect the floor and keep the stand from sliding. At 34.2 pounds, it is a substantial tool to position and store.

Skip it if you need a particularly light jack to carry around; this one weighs 34.2 pounds.

Pick this SHMQYSY for heavier lifting where its 1,500-pound rating, bearing-assisted operation, and rubber contact surfaces suit the task. Its 34.2-pound weight matters if you regularly move a jack between work areas.

Listed on Amazon as: 1500 LBS Motorcycle Jack, Thickened 0.48" Rubber Pad Motorcycle Stand Lift, Upgraded Labor-Saving Bearing, Steel Motorcycle Center Stand with Carrying Handle and Anti-Slip Bottom for Heavy ATV

#10

10. SHMQYSY 1300-Pound Center Jack

• Load Capacity: 1300 lb
• Material: Carbon Steel

Best for: Higher-capacity padded stand.

Why it ranks #10: This carbon-steel center stand has a 1300-pound capacity, safety pin and thick rubber pads, but the supplied data omits its lift range and dimensions.

A 1,300-pound rating gives the SHMQYSY MT1300LBY more stated capacity than the common 1,100-pound options in this roundup. Its 0.48-inch top rubber pad and anti-slip bottom provide padded contact at the bike and floor, while the title also identifies a T-handle and chain brush.

The thick top rubber pad is specified to help prevent scratches, and rubber pads underneath help protect the floor and provide stability. A safety pin locks the platform in place to help prevent accidental lowering during lifting. The carbon-steel stand carries a 1,300-pound rating. Its title names a T-handle and chain brush, but the supplied compatibility specification lists motorcycles only, despite the title’s ATV reference.

Skip it if you specifically need ATV compatibility stated in the specifications; the VIVOHOME VH326 lists ATV use.

Choose this SHMQYSY for motorcycle lifting when its higher stated capacity, padded surfaces, and safety pin match your priorities. Treat the motorcycle-only compatibility specification as the boundary if you are shopping specifically for an ATV jack.

Listed on Amazon as: 1300 LBS Motorcycle Jack, Thickened 0.48" Rubber Pad Motorcycle Lift, Upgraded Anti-Slip Bottom Dirtbike Stand, Carbon Steel Motorcycle Center Stand with Wide Deck, Chain Brush, T-Handle for ATV Gray