Best Fold Up Ramps For Wheelchairs for Home and Travel

#1 · Best Overall

1. KOLOTOOL 3FT Ramp

• Dimensions: 36"L x 29.2"W x 2"H
• Weight: 17 lb
• Load Capacity: 800 lb
• Material: Aluminum

Best for: Three-foot everyday step access.

Why it ranks #1: Its 36-inch length is specified for 3–9-inch rises, while the aluminum ramp weighs 17 pounds and lists an 800-pound capacity.

The KOLOTOOL 3-foot ramp is specified for 3- to 9-inch rises, making its length a clear match for one or two home steps within that range. Its aluminum construction and 800-pound capacity support daily mobility-equipment access indoors or outdoors, while the 17-pound weight keeps its portability grounded in a manageable listed figure.

A 36-inch length offers a shorter approach than longer ramps, and the stated 3- to 9-inch rise range helps narrow whether it fits a particular entry. The 29.2-inch width provides the listed crossing surface. KOLOTOOL identifies corrosion-resistant, rust-proof aluminum for indoor and outdoor use, supporting use across those settings. Its 800-pound capacity sets the load ceiling, and the 17-pound weight matters when folding and moving it between steps or travel locations.

Skip it if you need access over a rise above 9 inches; the TaiH Leo 8-foot ramp is specified for 8- to 24-inch steps.

This works for buyers addressing one or two steps in the 3- to 9-inch range who want an aluminum ramp for home or travel. Review the ground-drilling note and confirm the approach length suits the entry.

Listed on Amazon as: Portable Wheelchair Ramps 3FT for Home Steps, Non-Skid, Aluminum

#2 · Most Compact

2. FACHNUO 2FT Ramp

• Dimensions: 24.2"L x 31.56"W x 2.02"H
• Weight: 11 lb
• Load Capacity: 800 lb
• Material: Aluminum

Best for: Short thresholds and compact storage.

Why it ranks #2: At about 11 pounds, it is the lightest hinged option listed; its 2-foot length suits low rises, with wheelchair use recommended up to 4 inches.

At 24 inches long and 10.9 pounds, the FACHNUO ramp targets short threshold changes where carrying and storing a longer ramp is inconvenient. It is specified for 2- to 6-inch height adjustments, with wheelchair access recommended only when the step is no higher than 4 inches.

Its 24-by-29.2-inch unfolded surface serves short approaches, while the 24-by-13.2-inch folded dimensions make its storage footprint narrower. The listed weight of 10.9 pounds supports moving it between locations, and the 800-pound capacity sets the load limit. For wheelchair access, FACHNUO recommends keeping the step height at 4 inches or less, despite the broader 2- to 6-inch adjustment range. Baffles and a non-skid surface are listed as safety features.

Skip it if you need wheelchair access over a rise above 4 inches; the VNN 4-foot ramp is specified for 4- to 12-inch steps.

This suits someone handling a low threshold who values a light ramp with a smaller folded footprint. Keep the wheelchair approach at or below the stated 4-inch recommendation, and check the folded and open dimensions against the location.

Listed on Amazon as: FACHNUO 2FT Portable Wheelchair Ramp for Home Steps, Non-Skid Aluminum Ramp

#3 · 800-Pound Capacity

3. VNN 4FT Ramp

• Dimensions: 48"L x 29.2"W x 3.94"H
• Weight: 23.8 lb
• Load Capacity: 800 lb
• Material: Aluminum

Best for: Four-to-twelve-inch home steps.

Why it ranks #3: This 48-inch aluminum ramp lists an 800-pound capacity and a stated 4–12-inch step range, giving buyers a longer option than compact models.

A 4-foot span matched to 4- to 12-inch step heights gives this VNN ramp a defined role at higher home thresholds. Its 800-pound load capacity supports wheelchair access within that limit, while the aluminum construction and 29.2-inch width provide a substantial crossing surface for a doorway or step approach.

The 48-inch length is specified for steps 4 to 12 inches high, so measuring the rise helps establish whether this ramp suits the entry before setup. Its 29.2-inch width provides the listed travel surface, and aluminum construction keeps the ramp portable at 23.8 pounds. A double non-skid surface is identified in the product features, supporting traction during use. VNN notes that some sinking under load is normal and that the ramp rebounds; the 800-pound capacity remains the upper limit.

Skip it if you need a ramp for a rise below 4 inches; the FACHNUO 2-foot ramp covers lower 2- to 6-inch adjustments.

This fits buyers addressing a 4- to 12-inch home step who want a wide aluminum ramp with an 800-pound limit. Measure the rise first, and account for the listed possibility of temporary sinking under load.

Listed on Amazon as: VNN Portable Wheelchair Ramp 4FT, Non-Slip Ramps for Wheelchairs for Home

#4 · Long-Rise Choice

4. WHALEMOTOR 7FT Ramp

• Dimensions: 84"L x 29.2"W x 2"H
• Load Capacity: 800 Ponuds
• Material: Aluminum

Best for: Seven-foot traction-focused access.

Why it ranks #4: Its 84-inch length is specified for 7–21-inch rises and its listed capacity is 800 pounds; the provided specifications do not list its weight.

Jagged anti-slip scoring across the surface is the defining feature of this 7-foot WHALEMOTOR ramp, providing a traction-focused path for rises of 7 to 21 inches. Its aluminum construction and 800-pound capacity suit wheelchair access within those stated limits, while the black folding design supports portable use.

The 84-inch length is specified for 7- to 21-inch step heights, making rise measurement central to choosing this ramp. Its 29.2-inch width and aluminum construction provide the listed dimensions and material, while the 800-pound capacity establishes the maximum load. Jagged scoring is described as providing traction in all weather conditions. The product also lists an anti-slip mat at the bottom and fixing screws for securing the ramp to a wooden floor, relevant when considering placement and setup.

Skip it if you need a stated ramp weight before deciding how to carry it; the VEVOR 10-foot ramp lists its weight as 59.8 pounds.

This suits buyers needing a 7-foot ramp with scored traction for a rise between 7 and 21 inches. Consider the listed wooden-floor fixing screws and bottom mat when planning placement, and note that the supplied details omit its weight.

Listed on Amazon as: WHALEMOTOR Black Portable Wheelchair Ramp, 7FT No-sew Non-Slip Aluminum Wheelchair Ramp, Folding Portable Wheelchair Ramps for Home, Weight Capacity Up to 800 LBS, Loading Dock Plates

#5

5. WHALEMOTOR 6FT Ramp

• Dimensions: 38.19"L x 16.73"W x 9.92"H
• Weight: 35 lb
• Load Capacity: 800 Ponuds
• Material: Aluminum

Best for: Six-foot access with transition plates.

Why it ranks #5: The 6-foot ramp is listed for 6–18-inch rises and supports up to 800 pounds, though its listed weight of 35 pounds affects portability.

Transition plates at both the upper and lower ends give the WHALEMOTOR 6-foot ramp a defined connection at either side of an approach. The ramp is specified for 6- to 18-inch step heights and carries up to 800 pounds, serving residential or other access points within those limits.

The 6-foot length is intended for rises from 6 to 18 inches, so measuring the step helps determine whether the approach matches the specified range. Transition plates above and below provide end transitions at the landing and lower surface. Aluminum construction and a stated 800-pound capacity establish its material and load limit. At 35 pounds, it can be carried, though that weight is relevant when relocating it; the listed center hump may flatten with heavy weight or repeated use without affecting use.

Skip it if you need a lighter ramp for frequent relocation; the FACHNUO 2-foot ramp weighs 10.9 pounds, though it serves lower rises.

This suits buyers who need a 6-foot aluminum ramp with transition plates for a rise within the stated 6- to 18-inch range. Consider its 35-pound carrying weight and the available landing space before choosing it.

Listed on Amazon as: WHALEMOTOR Portable Wheelchair Ramp 6FT, Anti-Slip Aluminum Folding Portable Ramp, Wheelchair Ramps for Home, Weight Capacity Up to 800 LBS, with Transition Plates Above and Below, Loading Dock Plates

#6 · Support-Leg Design

6. TaiH Leo 8FT Ramp

• Dimensions: 96"L x 29"W x 2"H
• Weight: 55 lb
• Load Capacity: 800 lb
• Material: Aluminum

Best for: Tall steps needing mid-span support.

Why it ranks #6: Its 8-foot ramp covers stated 8–24-inch step heights and includes two adjustable support legs; the 55-pound weight makes it a two-person lift.

Two adjustable support legs set this TaiH Leo ramp apart, adding mid-point support for approaches to steps 8 to 24 inches high. Its 8-foot aluminum span extends access over taller rises, while the 800-pound capacity accommodates listed wheelchair, scooter, and walker use within that limit.

The ramp opens to 96 inches and folds to 48 inches, giving it a long approach for the specified 8- to 24-inch height range and a shorter length for storage. Adjustable support legs extend from 11 to 15.8 inches to support the middle and address sagging or wobbling. Aluminum construction and an 800-pound capacity serve mobility equipment, but the 55-pound weight means moving it is a two-person task, as the product notes.

Skip it if you need a ramp one person can readily carry; the KOLOTOOL 7-foot telescoping ramp weighs 20 pounds as a two-pack.

Choose this for taller home steps where adjustable mid-span support is useful and a long approach can be accommodated. Its 55-pound weight calls for two people to lift, and the rise must fall within 8 to 24 inches.

Listed on Amazon as: 8FT Wheelchair Ramp with Support Legs, Portable Ramps for Home Steps

#7

7. VEVOR 10FT Ramp

• Dimensions: 119.68"L x 29"W x 3.3"H
• Weight: 59.8 lb
• Load Capacity: 800 lb
• Material: Aluminum alloy 6005

Best for: Long doorway and curb approaches.

Why it ranks #7: This 10-foot foldable ramp is specified for 10–20-inch rises and an 800-pound capacity, but its listed 59.8-pound weight limits easy carrying.

The VEVOR ramp's 10-foot length is specified for 10- to 20-inch doors, garages, and driveway curbs, giving taller approaches a long crossing surface. Its grooved aluminum and full-coverage non-slip coating provide two listed surface features, while the 800-pound capacity defines the supported load limit.

At 119.68 inches unfolded, the ramp provides the length specified for 10- to 20-inch rises; folding reduces it to 60.3 inches long for storage. The 29-inch width and 800-pound capacity establish the usable dimensions and load ceiling. Grooved aluminum paired with a full-coverage non-slip coating supports traction, and aluminum alloy 6005 identifies its construction. At 59.8 pounds, it is a substantial item to move, so the folded length and weight matter when planning storage or transport.

Skip it if you need a lighter ramp for routine transport; the KOLOTOOL 7-foot telescoping set is listed at 20 pounds.

This is for buyers handling tall doorways, garage entries, or driveway curbs within the 10- to 20-inch range. Allow for its 59.8-pound weight and folded length when planning storage or moving it.

Listed on Amazon as: VEVOR 10FT Portable Wheelchair Ramp, Smooth Door Access No Blocking Design, 800 LBS Heavy Duty Non-Slip Threshold Ramp for Home Steps, Stairs, Doorways, Scooter, Curbs

#8

8. Kselythan 10FT Ramp

• Dimensions: 122"L x 28.74"W x 1.57"H
• Weight: 58.2 lb
• Load Capacity: 600 lb

Best for: Ten-foot access with reflective strips.

Why it ranks #8: The 10-foot folding aluminum ramp lists a 600-pound capacity and weighs 58.2 pounds, making it a substantial option for longer access runs.

Reflective strips distinguish this 10-foot Kselythan ramp for approaches where visibility is a consideration. Its non-skid aluminum surface, stainless-steel hinges, and 600-pound capacity support listed use by power chairs, scooters, and manual wheelchairs, while the folding format and integrated carry handle address transport and storage.

The 122-inch length provides a long approach, and the 28.74-inch width defines the listed crossing surface for stairs or vehicle entry. Thickened aircraft-grade aluminum alloy and stainless-steel hinges are specified for daily use, with a 600-pound load limit. The ramp folds into a slim profile and has an integrated handle, making storage and carrying part of its stated design. Reflective strips and a non-skid surface are also listed; users still need to account for the ramp’s 58.2-pound weight.

Skip it if you need a higher stated capacity; the VEVOR 10-foot ramp supports up to 800 pounds, though it weighs 59.8 pounds.

This suits buyers seeking a folding 10-foot ramp for wheelchair, scooter, or power-chair access, especially where reflective strips are useful. Account for its 58.2-pound weight and keep the combined load within 600 pounds.

Listed on Amazon as: 10FT Portable Wheelchair Ramp, Folding Wheelchair Ramp with Non-Skid Aluminum & Reflective Strips, 600LBS Capacity Wheelchair Ramps for Steps, Stairs, Vehicle Entry

#9

9. KOLOTOOL Telescoping Ramp

• Dimensions: 37"L x 3"W x 3"H
• Weight: 9.59 kg
• Load Capacity: 600 lb
• Material: Aluminum

Best for: Adjustable length for home and travel.

Why it ranks #9: This telescoping pair adjusts from 48 to 84 inches and weighs 20 pounds as a pair, but its 600-pound capacity is lower than many picks.

A telescoping span that adjusts from 48 to 84 inches lets this KOLOTOOL ramp vary in length for different access situations. Its two-piece set weighs 20 pounds, according to the feature listing, and the carrying bag named in the title supports carrying and storage for home or travel use.

The adjustable 48- to 84-inch range lets the user select a span suited to the intended stairs or vehicle access, rather than carrying a fixed-length ramp. The feature listing gives a combined two-piece weight of 20 pounds and describes the set as lightweight and easy to store. Aluminum construction keeps the material clear, while the 600-pound maximum load sets a more limited capacity than 800-pound options. The product specifically advises measuring the intended use and checking ramp length before purchase.

Skip it if you need an 800-pound load limit; the VEVOR 10-foot ramp supports up to 800 pounds, though it weighs 59.8 pounds.

This suits buyers who value adjustable length for home or vehicle access and need a portable two-piece set. Check the required span carefully and keep the combined load within its 600-pound capacity.

Listed on Amazon as: 7FT Telescoping Aluminum Portable Wheelchair Ramp with Bag, 600LBS

#10

10. MAASTERS 12FT Ramp

• Dimensions: 146.46"L x 28.34"W x 1.97"H
• Weight: 93.3 lb
• Load Capacity: 600 lb
• Material: Aluminum

Best for: Long spans for loading and steps.

Why it ranks #10: Its 12-foot length suits longer access runs and breaks into two pieces, but the 93.3-pound weight and 600-pound capacity make it less convenient.

A 12-foot length gives the MAASTERS ramp an extended approach for home steps, vehicles, and loading areas. It breaks down into two pieces with carrying handles for transport and storage, while its 600-pound capacity sets a clear limit for wheelchairs, power chairs, and other listed uses.

The 146.46-inch length and 28.34-inch width define a long, broad access surface, while the two-piece design and carrying handles support handling and storage. Composite aluminum construction is listed alongside a 600-pound load capacity, so the ramp’s long span does not change its stated limit. The product identifies home use, vehicles, and loading materials as applications. At 93.3 pounds, the full product weight is an important practical consideration when moving or setting it up.

Skip it if you need a lighter ramp to carry often; the VEVOR 10-foot ramp weighs 59.8 pounds and supports up to 800 pounds.

This suits buyers who need a long ramp for home steps, vehicles, or loading areas and can manage its 93.3-pound weight. Check the available approach length and keep total load within 600 pounds.

Listed on Amazon as: MAASTERS Aluminum Wheelchair Ramp 12 Feet – Loading Capacity 600 lbs