Best Drop Shank For Weight Distribution Hitch: 10 Options Compared

#1 · Best Overall

1. CURT 17123 Shank

• Material: Alloy Steel
• Material Type: Alloy Steel
• Compatible with Vehicle Type: Trailer
• Weight: 11.36 kg

Best for: Wide-range CURT hitch adjustment.

Why it ranks #1: Fits a 2-inch receiver and CURT heads, with 7 inches of drop, 10-1/2 inches of rise, and listed ratings of 15,000 pounds GTW and 1,500 pounds TW.

Up to 10-1/2 inches of rise or 7 inches of drop gives the CURT 17123 a broad adjustment range for setting a weight-distribution hitch head at the needed height. Its 2-inch receiver fit and compatibility with CURT heads make it a focused replacement option for matching trailer and tow-vehicle geometry.

The reversible shank provides up to 7 inches of drop or 10-1/2 inches of rise, giving buyers two orientation choices when leveling the hitch head. Multiple 3/4-inch mounting holes, spaced 1-1/4 inches apart, allow incremental height adjustment. It fits a 2-by-2-inch receiver with a 5/8-inch pin hole and CURT weight-distribution heads. Solid steel construction is rated for up to 15,000 pounds gross trailer weight and 1,500 pounds tongue weight, subject to the lowest-rated component.

Skip it if you need a 2-1/2-inch receiver shank; the CURT 17132 is listed for that receiver size.

Choose this CURT shank if your setup uses a 2-inch receiver and CURT weight-distribution head, and its rise or drop range suits your trailer. The spring bars and other components still govern the system’s usable capacity.

Listed on Amazon as: CURT 17123 Weight Distribution Shank Only, 2", 7" Drop, 10-1/2" Rise

#2 · Deepest 2-Inch Drop

2. CURT 17124 Shank

• Material: Carbon Steel
• Material Type: Carbon Steel
• Compatible with Vehicle Type: Trailer
• Weight: 32 lb

Best for: CURT 2-inch receiver with deeper drop.

Why it ranks #2: Fits a 2-inch receiver and offers an 8-3/4-inch drop, multiple head-height holes, and listed ratings of 15,000 pounds GTW and 1,500 pounds TW.

An 8-3/4-inch drop makes the CURT 17124 a deeper-drop choice within a 2-inch receiver setup. Multiple mounting holes let buyers adjust the weight-distribution head height, while its stated fit for a 2-by-2-inch receiver and CURT hitch heads helps narrow system compatibility.

The 8-3/4-inch drop addresses setups that need more downward adjustment, and multiple holes spaced 1-1/4 inches apart let the head height be set in increments. It fits a 2-by-2-inch receiver with a 5/8-inch pin hole and provides an adjustable mount for CURT weight-distribution hitches. CURT lists ratings of 15,000 pounds gross trailer weight and 1,500 pounds tongue weight, giving buyers limits to compare with the other components in their towing system.

Skip it if you need a listed rise measurement; the CURT 17123 specifies up to 10-1/2 inches of rise and 7 inches of drop.

This CURT is suited to buyers with a 2-inch receiver and CURT weight-distribution hitch who need its listed 8-3/4-inch drop. Check that the mounting adjustment and component ratings match your trailer and hitch setup.

Listed on Amazon as: CURT 17124 Replacement Weight Distribution Hitch Shank, 2-Inch Receiver, 8-3/4-Inch Drop

#3 · Wide Adjustment Range

3. Husky 30860 Shank

• Material: Alloy Steel
• Material Type: Alloy Steel
• Compatible with Vehicle Type: Truck, RV, Trailer
• Weight: 24.3 lb

Best for: Husky systems needing extra drop.

Why it ranks #3: Fits a 2-inch receiver and provides 9-3/4 inches of drop, 7-5/8 inches of rise, eight mounting holes, and stated 14,000-pound weight distribution capacity.

A maximum 9-3/4-inch drop gives the Husky 30860 a useful geometry option for setups needing substantial downward adjustment. It fits standard 2-inch receivers and has eight mounting holes, combining receiver compatibility with several positions for aligning a compatible Husky weight-distribution system.

The 10-inch shank length and 7-5/8-inch rise or 9-3/4-inch drop provide defined geometry options for positioning the hitch head. Eight mounting holes allow adjustment on compatible Husky systems, while the standard 2-inch receiver fit narrows the receiver match. Husky lists a 6,000-pound shank carrying capacity and 14,000-pound weight-distribution capacity; buyers can use both figures when checking that the shank and full setup suit their towing requirements.

Skip it if you need a higher stated shank carrying capacity; the Blue Ox BXW4028 lists a 20,000-pound maximum trailer weight capacity.

This Husky suits buyers with a 2-inch receiver and a compatible Husky system who need its listed rise, drop, and eight-hole adjustment. Observe the separate 6,000-pound shank carrying limit when checking system capacity.

Listed on Amazon as: Husky Towing 30860 Weight Distribution Hitch Shank 10 Inch Length 7-5/8 Inch Rise 9-3/4 Inch Drop – 6000 lb Shank Carry 14000 lb Weight Distribution – 2 Inch Receiver 8 Hole Silver

#4 · Best 2.5-Inch Fit

4. CURT 17132 Shank

• Material: Alloy Steel
• Material Type: Alloy Steel
• Compatible with Vehicle Type: Trailer

Best for: CURT setups with 2.5-inch receivers.

Why it ranks #4: Designed for a 2-1/2-inch receiver, this CURT shank has adjustable head-height holes and listed ratings of 15,000 pounds GTW and 1,500 pounds TW.

An 8-inch drop specification and 2-1/2-inch receiver fit make the CURT 17132 a replacement shank option for larger receiver openings. Multiple mounting holes let you adjust the weight-distribution head height, while its listed 15,000-pound gross trailer weight and 1,500-pound tongue weight ratings define its stated capacity.

This shank fits a 2-1/2-by-2-1/2-inch receiver with a 5/8-inch pin hole, a key distinction for buyers whose receiver is larger than the common 2-inch opening. Multiple 3/4-inch holes spaced 1-1/4 inches apart provide head-height adjustment, helping set the hitch position. CURT lists compatibility with any CURT weight-distribution hitch and ratings of 15,000 pounds gross trailer weight and 1,500 pounds tongue weight, giving buyers clear system limits to check.

Skip it if you have a 2-inch receiver; the CURT 17124 is listed for that opening and provides an 8-3/4-inch drop.

This is a practical match for a CURT weight-distribution setup using a 2-1/2-inch receiver and needing an 8-inch drop. Verify that the receiver pin-hole size and the hitch system’s capacity align with its specifications.

Listed on Amazon as: Curt Manufacturing 17132 Weight Distribution Hitch Replacement Shank (fits 2-1/2" Receiver, 8" Drop)

#5 · Highest Listed Capacity

5. Blue Ox BXW4028 Shank

• Material: Alloy Steel
• Material Type: Alloy Steel
• Compatible with Vehicle Type: Trailer

Best for: High-capacity 2.5-inch receiver setups.

Why it ranks #5: A 2-1/2-inch receiver shank with nine adjustment holes, it lists maximum capacities of 20,000 pounds trailer weight and 2,000 pounds tongue weight.

A 20,000-pound maximum trailer rating and 2,000-pound maximum tongue-weight rating set the capacity profile of the Blue Ox BXW4028. Its nine-hole, 9-inch adjustment design accepts 2-1/2-inch receivers and works in raised or dropped positions for flexible hitch-head placement.

The nine-hole adjustment design gives buyers multiple mounting positions for setting the head height, while the 9-inch configuration works in either a raised or dropped position. Its 2-1/2-inch receiver fit targets a larger receiver opening, so check that measurement before choosing it. Blue Ox lists a maximum trailer weight capacity of 20,000 pounds and maximum tongue weight capacity of 2,000 pounds, providing explicit limits for matching the shank to the towing system.

Skip it if you use a 2-inch receiver; the Blue Ox BXW4028 is specified for 2-1/2-inch receivers, unlike the CURT 17123.

Pick this Blue Ox for a 2-1/2-inch receiver setup that benefits from nine adjustment holes and its listed capacity limits. Its receiver size and system ratings are the key boundaries to match before installation.

Listed on Amazon as: Blue Ox BXW4028 SwayPro Weight Distribution Shank – 9 Hole x 9" x 2-1/2"

#6

6. Eaz-Lift 48653 Shank

• Material: Blend
• Material Type: Blend
• Compatible with Vehicle Type: Truck
• Weight: 16 oz

Best for: Bumper-clearance shank for 2-inch receivers.

Why it ranks #6: Its 12-inch length is intended to help clear bumper interference; it fits a 2-inch receiver and offers 5-3/4 inches of drop and 8-3/4 inches of rise.

A 12-inch length is the Eaz-Lift 48653’s key advantage when extra reach is needed to clear bumper interference. It fits a 2-inch receiver and offers 5.75 inches of drop or 8.75 inches of rise, giving buyers defined geometry choices alongside its open-head adjustment design.

The 12-inch length is specifically identified as providing extra clearance from bumper interference, a practical consideration when a shorter shank crowds the vehicle’s rear. Its open-head design supports easier adjustment, and the 5.75-inch drop or 8.75-inch rise gives two orientations for matching coupler height. Powder-coated heavy-duty steel construction and a listed 15,000-pound rating round out the stated features; the 2-by-2-inch receiver fit identifies the required opening.

Skip it if you need a 2-1/2-inch receiver shank; the Eaz-Lift 48651 fits that opening and offers a 5.5-inch rise.

Choose the 48653 if you need extra length for bumper clearance, use a 2-inch receiver, and can work within its stated rise and drop. Its open head and powder-coated steel are practical features for adjustment and towing use.

Listed on Amazon as: Eaz-Lift Heavy Duty Weight Distribution Forged Shank – Fits 2" x 2" Receiver |12" Length, 5 3⁄4" Drop, 8 3⁄4" Rise | 15,000 lb. Capacity | Durable Powder Coated Steel | Open Head Design – (48653)

#7

7. VODCACA 17123 Shank

• Material: Metal
• Material Type: Metal

Best for: CURT-compatible replacement on a 2-inch receiver.

Why it ranks #7: Matches a 2-inch receiver and CURT weight distribution hitch fit, with 7 inches of drop and 10-1/2 inches of rise; its supplied data lists metal construction.

A 10-1/2-inch maximum rise paired with a 7-inch maximum drop gives the VODCACA 17123 a wide height range for a 2-inch receiver setup. It is listed as compatible with CURT weight-distribution hitches, making its adjustment range useful to buyers replacing a shank in that system.

The shank fits a 2-by-2-inch receiver with a 5/8-inch pin hole, while its maximum rise and drop let buyers orient it to address different hitch-height needs. Its 13-1/4-inch overall height and 11-inch length provide additional dimensions for checking the available space around a vehicle and trailer. VODCACA lists compatibility with CURT weight-distribution hitches and describes installation as a sequence of a few steps, supporting a straightforward replacement workflow.

Skip it if you require a stated load rating; the CURT 17123 lists ratings up to 15,000 pounds GTW and 1,500 pounds TW.

Consider this replacement if you use a CURT weight-distribution head on a 2-inch receiver and need its stated rise-and-drop range. Its overall dimensions can help with clearance checks, but the listing gives no load-capacity rating.

Listed on Amazon as: 17123 Replacement Weight Distribution Hitch Shank | 2-Inch Receiver 7-Inch Drop, 10-1/2-Inch Rise

#8

8. Eaz-Lift 48651 Shank

• Weight: 18 lb

Best for: Long-reach 2.5-inch receiver fit.

Why it ranks #8: The 12-inch shank fits a 2-1/2-inch receiver and offers 2-1/2 inches of drop and 5-1/2 inches of rise, with a stated 15,000-pound rating.

A 12-inch length helps the Eaz-Lift 48651 provide extra reach where bumper interference is a concern. Its 2-1/2-inch receiver fit, 2.5-inch drop, and 5.5-inch rise set it apart as a long shank with a comparatively modest listed height range.

The 12-inch length is identified as useful for gaining clearance from bumper interference, while its 2-1/2-inch receiver fit serves larger receiver openings. An open-head design allows easier adjustment, and the shank can be used in either direction to match the ball mount to coupler height. Its 2.5-inch drop and 5.5-inch rise define the available range; powder-coated heavy-duty steel construction and a listed 15,000-pound rating add further selection criteria.

Skip it if you need more than 5.5 inches of rise; the Blue Ox BXW4028 works raised or dropped and has a nine-hole adjustment design.

This Eaz-Lift fits buyers with a 2-1/2-inch receiver who need extra length for bumper clearance and a modest rise or drop. Check that its 2.5-inch drop and 5.5-inch rise cover your coupler-height adjustment.

Listed on Amazon as: Camco 48651 Eaz-Lift Weight Distribution Forged Shank

#9

9. Husky 32555 Shank

• Weight: 5 lb

Best for: Long-shank clearance applications.

Why it ranks #9: The listing specifies an 8.75-inch drop and 14-inch length, but provides limited receiver-fit, adjustment, and capacity details for matching a setup.

A 14-inch L-shank length gives this Husky option extra reach for setups where shank length is a key dimension. The title also specifies an 8.75-inch drop, making those two measurements the main fit considerations for buyers choosing a weight-distribution replacement shank.

The 14-inch L-shank length and 8.75-inch drop identify the dimensions buyers can use when comparing hitch geometry and available space around the vehicle. Husky describes its towing products as made with durable materials and engineered for towing applications, but this listing provides few shank-specific adjustment details. That makes the stated length and drop especially important when assessing whether this piece suits an existing head and the clearance needed behind the receiver.

Skip it if you need a listed rise measurement; the Eaz-Lift 48653 specifies an 8.75-inch rise as well as a 5.75-inch drop.

This Husky shank suits buyers prioritizing a 14-inch L-shank length and an 8.75-inch drop. The listing provides limited shank-specific fit details, so use those stated dimensions as the basis for deciding whether it matches your setup.

Listed on Amazon as: Husky Towing 32555 14" L Shank W/8.75" Drop

#10

10. BulletProof 3-Inch Shank

• Material: Alloy Steel
• Material Type: Alloy Steel
• Compatible with Vehicle Type: Car, RV, Truck, Van
• Weight: 37 lb

Best for: Heavy-duty 3-inch receiver shank.

Why it ranks #10: This solid-steel shank is specified for a 3-inch receiver, unlike the 2-inch and 2-1/2-inch receiver options that fit the other listed products.

A solid-steel 3-inch shank makes the BulletProof option a specific match for setups using a 3-inch receiver. It includes a corrosion-resistant pin and R-clip to secure the shank in the receiver tube, giving buyers the listed hardware needed for that connection.

The 3-inch solid-steel construction identifies the receiver size and material, making this shank relevant to buyers with a matching 3-inch tube rather than standard 2-inch or 2-1/2-inch openings. The included corrosion-resistant pin and R-clip secure it in the vehicle’s receiver, so those parts are supplied for the shank connection. Its 37-pound listed item weight is also useful to consider when handling or storing the component between towing trips.

Skip it if you have a 2-inch receiver; the CURT 17123 fits that opening and offers up to 10-1/2 inches of rise.

Choose this BulletProof shank only when your receiver opening is 3 inches and its included pin and R-clip suit your connection needs. The listing provides no height-adjustment range or capacity figures for evaluating hitch geometry or load limits.

Listed on Amazon as: Bulletproof 3" Weight Distribution Shank