Best Mower Lifts For Zero Turn Mowers: 10 Options Compared

#1 · Best Overall

1. MoJack HDL500

• Load Capacity: 500 lbs
• Material Type: Alloy Steel
• Weight: 68 lb

Best for: Hydraulic ZTR deck access.

Why it ranks #1: Designed for front-end ZTR maintenance, it offers 500-pound capacity, hydraulic lifting, three safety stops, and an included safety strap.

A manual hydraulic cylinder raises the mower front end without requiring deck removal, enabling access for blade changes and under-deck cleaning. The MoJack HDL500 supports up to 500 pounds and adds three locking stops, making it a practical fit for ZTR owners who want controlled access for routine service.

The hydraulic cylinder raises the front end smoothly, so owners can reach the cutting deck for cleaning or blade changes without removing the deck assembly. Three safety stops at 12, 18, and 24 inches provide defined working positions, while the included strap adds another securing point. Its 500-pound capacity suits front-end ZTR maintenance, and the stated wheel span also fits garden tractors and rototillers. At 68 pounds, it is a substantial lift to move and store.

Skip it if you want a lighter 800-pound lift for commercial mower use; Jungle Jim’s Jungle Jack V2 weighs 15 pounds and supports listed ZTRs.

The HDL500 suits owners servicing ZTRs who want hydraulic front-end lifting and several defined lock heights. Consider its 68-pound weight and 500-pound limit when choosing a lift for frequent transport or equipment with a heavier front end.

Listed on Amazon as: MoJack HDL500 45501 Hydraulic Lift Jack, 500 lb, ZTR & Rider, Locking Bar

#2 · Drill-Assist Option

2. MoJack EZ MAX

• Weight: 62.9 lb

Best for: Compact residential servicing.

Why it ranks #2: Built for zero-turn mowers and tractors, this 450-pound front-end lift operates manually or with a power drill and folds for storage.

A folding frame makes the MoJack EZ MAX easier to store between jobs, while manual or power-drill operation gives homeowners two ways to raise a mower. Its 450-pound front-end capacity is specified for zero-turn mowers and lawn tractors, supporting routine blade and seasonal maintenance within that load limit.

The EZ MAX lifts the mower’s front end up to 450 pounds, providing access for blade sharpening, blade replacement, and other routine service without relying on makeshift ramps. Owners can operate it manually or use a power drill to make the lifting process easier. Its compact folding design helps reduce storage demands after the job, a useful household consideration. The capacity applies to the front end being lifted, not the mower’s total weight, so that distinction matters when checking suitability.

Skip it if you need a higher-capacity lift for heavier equipment; Glosaie’s 800-pound mower lift has a stated 19-inch working height.

This is a fit for homeowners handling routine zero-turn or tractor maintenance who value fold-away storage and drill-assisted lifting. Check the front-end load, not just the mower’s total weight, against its 450-pound limit before choosing it.

Listed on Amazon as: MoJack EZ MAX 45001 Riding Lawn Mower Lift Jack, 450 lb, Zero Turn/Tractor

#3 · Portable 800-Pound

3. Jungle Jim's Jungle Jack V2

• Load Capacity: 800 lb
• Material Type: Alloy Steel
• Weight: 15 lb

Best for: Portable commercial mower service.

Why it ranks #3: Its 800-pound capacity targets ZTR and stand-on mowers, while the 15-pound weight and compact design suit transport between job sites.

At 15 pounds, the Jungle Jack V2 is notably portable for an 800-pound-capacity lift, enabling lawn-care crews to bring it between job sites. Its listed compatibility includes ZTRs, stand-on mowers, and belt-drive and hydro walk-behinds, making it useful beyond a single mower format.

The 800-pound capacity supports service work on commercial and residential mowers within the stated limit, while compatibility with ZTRs, stand-on mowers, and select residential models broadens its use across a fleet. Its 15-pound weight and compact 6-by-12-by-30-inch dimensions support transport and storage between jobs. The lift is also listed for belt-drive and hydro walk-behinds, a relevant detail for crews with varied equipment. Confirm that the specific machine type and load fall within those stated parameters.

Skip it if you need a stated working height and safety arm; TRUCFUSION’s foldable 800-pound jack raises to 19 inches and includes a safety arm.

The Jungle Jack V2 fits lawn-care operators and homeowners who need to transport a lift among compatible mowers. Its low listed weight helps portability, while its specified mower types and 800-pound capacity define the machines and loads it can serve.

Listed on Amazon as: Jungle Jim's Jungle Jack V2 Mower Jack, Lifts Most Units, 800 Lb Capacity

#4 · One-Year Warranty

4. TRUCFUSION Lawn Mower Jack

• Load Capacity: 800 lbs
• Material Type: Carbon Steel
• Weight: 33 lb

Best for: Foldable high-capacity lift.

Why it ranks #4: This 800-pound carbon-steel lift raises mowers up to 19 inches and includes a safety arm; its stated warranty is one year.

A foldable design combines with an 800-pound capacity, making the TRUCFUSION a choice for owners who need substantial lifting support but also want a more compact storage format. It raises a mower to 19 inches and uses a safety arm that locks in place to help stabilize the machine during maintenance.

The stated 800-pound capacity and 19-inch lift height provide a defined operating range for mower service, while the safety arm is meant to be lowered and locked before working. Its foldable format helps reduce storage demands between jobs. Carbon-steel construction and a powder-coated finish are specified for durability and corrosion resistance, while the yellow color offers high visibility. The instructions also warn users to remove the locking pin before lowering, an important step in the operating sequence.

Skip it if you prefer a 15-pound lift for carrying between sites; Jungle Jim’s Jungle Jack V2 weighs 15 pounds and supports listed ZTRs.

Choose this TRUCFUSION for mower maintenance where its 800-pound capacity, 19-inch height, and foldable storage suit the job. Follow the stated safety-arm and locking-pin sequence, particularly when lowering the mower.

Listed on Amazon as: Lawn Mower Jack 800LBS, Zero Turn Mower Jack Lift, Foldable

#5 · 800-Pound Capacity

5. Glosaie Lawn Mower Lift

• Material Type: Alloy Steel
• Weight: 29 lb

Best for: High-capacity mechanical lifting.

Why it ranks #5: The mechanical lift is listed for zero-turn mower use, supports 800 pounds, and raises equipment to a stated 19-inch working height.

An 800-pound capacity and 19-inch working height give the Glosaie lift room for heavier mower maintenance, including repairs and routine servicing. Its mechanical lifting principle and safety arm are intended to support controlled raising, while the listed 29-pound weight makes it a relatively manageable option to position in a workspace.

The mechanical lifting principle is described as effort-saving, allowing one person to raise a mower to the stated 19-inch working height for maintenance. Its 800-pound capacity accommodates a broader load range than lighter-rated lifts, while the safety arm provides a securing feature during work. The alloy-steel construction identifies the frame material. At 29 pounds and with dimensions of 5 by 20 by 25 inches, it has defined handling and storage requirements to consider before setting up a work area.

Skip it if you need hydraulic lifting and multiple lock heights; MoJack HDL500 uses a hydraulic cylinder with stops at 12, 18, and 24 inches.

Choose the Glosaie for mower maintenance when an 800-pound rating and 19-inch lift height match the equipment and work area. Its mechanical action and safety arm are relevant, but the stated height sets a clear clearance boundary.

Listed on Amazon as: Lawn Mower Lift, 800 lb Capacity Zero Turn Mower Lift, Orange

#6

6. Tuoksullxm Lawn Mower Jack

• Load Capacity: 800 lb
• Material Type: High Carbon Steel
• Weight: 28 lb

Best for: Steel-frame 800-pound capacity.

Why it ranks #6: It explicitly lists zero-turn mower compatibility and an 800-pound capacity, with a high-carbon-steel frame for routine maintenance tasks.

A high-carbon-steel frame and 800-pound capacity give the Tuoksullxm lift a substantial rating for zero-turn and riding mower maintenance. Its compatibility also names garden tractors and ATVs, so buyers servicing several listed equipment types can use one lift for tasks such as blade sharpening, deck cleaning, and routine upkeep.

The 800-pound capacity is specified for zero-turn mowers, riding mowers, and most residential or commercial lawn equipment, supporting maintenance within that load limit. High-carbon steel forms the frame, while the listed compatibility extends to garden tractors and ATVs. These vehicle types make it relevant to a mixed equipment lineup rather than only a zero-turn mower. At 28 pounds, it has a stated weight to account for when moving it into position; the supplied information does not specify a lifting height.

Skip it if you need a stated height and a foldable frame; TRUCFUSION’s V10703118 lists a 19-inch lift height and foldable design.

Consider the Tuoksullxm for maintenance across zero-turn mowers, riding mowers, garden tractors, or ATVs when its 800-pound rating fits the load. Buyers who need to plan around a specific working clearance should note that no lift height is listed.

Listed on Amazon as: Lawn Mower Jack, 800 lb Capacity Zero-Turn Mower Lift, Gray

#7

7. VULZEN Lawn Mower Lift Jack

• Material Type: Metal
• Weight: 32 lb

Best for: Rotating-handle safety release.

Why it ranks #7: This manual jack lists zero-turn use and an 800-pound capacity, with a rotating handle to release its safety arm.

A rotating handle releases the safety arm, giving the VULZEN a specified release method for lowering a raised mower after maintenance. Its 800-pound capacity and listed compatibility with zero-turn, stand-on, riding, and commercial push mowers make it relevant to varied equipment, from deck cleaning to tire service.

The 800-pound rating supports the stated maintenance tasks of blade replacement, deck cleaning, belt inspection, and tire service, provided the mower load is within capacity. A rotating handle releases the safety arm, establishing a defined lowering workflow rather than leaving the release method unspecified. The lift operates manually and weighs 32 pounds, factors that affect setup and repositioning. Its 26.8-by-15-by-43.3-inch dimensions also help buyers assess whether the jack fits their storage and working area.

Skip it if you want hydraulic lifting to reduce manual effort; EROMMY’s riding-mowers lift uses a 500-pound hydraulic system.

The VULZEN suits home users or commercial operators servicing several listed mower styles, especially for deck, belt, blade, or tire work. Its manual operation and 32-pound weight are worth weighing against the workspace and lifting routine.

Listed on Amazon as: 800LBs Lawn Mower Lift Jack V2, Zero Turn Mower Jack, Heavy Duty Mower Jack for Zero Turn, Stand-On, Riding and Commercial Push Mowers, ZTRs, Rotating Handle Releases Safety Arm

#8

8. EROMMY Hydraulic Mower Lift

• Material Type: Alloy Steel
• Weight: 52.3 lb

Best for: Hydraulic adjustable-fit lifting.

Why it ranks #8: Its hydraulic system supports 500 pounds and offers three height positions; the stated 40–47.6-inch axle fit requires careful mower measurement.

An adjustable wheel span for 40–47.6-inch axles pairs with three height positions, helping owners tailor the EROMMY lift to a mower’s fit and working angle. Its 500-pound hydraulic system raises the front end with less manual effort, supporting one-person jobs such as blade changes and undercarriage cleaning.

The hydraulic system has a 500-pound capacity and is described as requiring minimal effort, which can make front-end lifting more manageable during service. Its adjustable wheel span is specified for 40–47.6-inch axles, giving buyers a concrete fit range to compare with their mower. Three height positions let users select among working angles, while manual operation keeps the lift’s method straightforward. At 52.3 pounds, it is heavier to reposition than a compact portable jack, so workspace placement deserves consideration.

Skip it if you need an 800-pound capacity for a heavier mower; Glosaie’s Glo-53 lift is rated for 800 pounds and reaches 19 inches.

The EROMMY suits owners whose mower axle falls within the listed 40–47.6-inch span and who want hydraulic lifting with three height choices. Its 500-pound limit and 52.3-pound weight are important load and handling boundaries.

Listed on Amazon as: EROMMY 500LB Hydraulic Mower Lift for 40-47.6" Axle, 24" Lawn Tractor Jack with 3-Height Adjustment, Zero Turn Mower Lift for Maintenance & Repair, Red

#9

9. Maxority Riding Lift Jack

• Load Capacity: 300 lb
• Material Type: Alloy Steel
• Weight: 31.7 kg

Best for: Multi-vehicle maintenance lift.

Why it ranks #9: It lists zero-turn mowers among compatible equipment and includes a safety lock, but its 300-pound capacity is lower than most alternatives here.

A built-in safety lock pairs with a 300-pound capacity, giving owners a way to raise supported equipment for cleaning, tire changes, and repairs. Maxority lists compatibility with zero-turn mowers, tractors, ATVs, motorcycles, snowmobiles, and UTVs, making this a flexible choice when one lift needs to serve more than a mower.

The adjustable riding-lift format lets you raise equipment for maintenance, while the built-in safety lock is intended to keep it stable during work. Its 300-pound capacity is the key boundary: check the front-end load being lifted against that limit rather than relying on total mower weight. Non-slip wheels and a handle are called out in the title, supporting movement and handling around a workspace. Alloy-steel construction provides the stated material for this multi-vehicle lift.

Skip it if you need a lift rated above 300 pounds; MoJack HDL500 offers a stated 500-pound capacity for front-end ZTR maintenance.

Choose the Maxority for lighter zero-turn or multi-vehicle maintenance, including cleaning and tire changes. Its broad listed compatibility is useful across equipment types, but the 300-pound capacity is the deciding boundary for the load you plan to raise.

Listed on Amazon as: 300lb Capacity, Adjustable Riding Lift Jack Heavy Duty Construction with Safety Lock, Non-Slip Wheels&Handle for Tractors, Atvs and Zero Turn Lawn Mowers

#10

10. GEARPASS Lawn Mower Lift

• Load Capacity: 1300 lb

Best for: Quick deck-hook setup.

Why it ranks #10: It is described for zero-turn and riding mowers, but the listing gives conflicting capacity figures, making its stated lifting limit unclear.

Spring-loaded engaging teeth hook onto the mower deck for tool-free setup, helping owners get the GEARPASS lift into position quickly for service. The product title states an 800-pound capacity, and the supplied details identify carbon-steel construction with a powder-coated finish for lifting zero-turn and riding mowers.

The spring-loaded teeth are described as engaging the mower deck, so setup does not require tools or pins; that can simplify preparation before maintenance. The title states an 800-pound capacity for zero-turn and riding mowers, while the carbon-steel construction and powder-coated finish are described as resisting rust, corrosion, and deformation. Its dimensions are 39 by 16 by 5.9 inches, useful information when planning placement and storage. Check the intended load and deck contact point before raising equipment.

Skip it if you need a stated lift height before planning clearance; TRUCFUSION’s V10703118 lists a 19-inch working height.

The GEARPASS fits buyers who value quick, tool-free deck engagement for zero-turn or riding mower service. Its title states an 800-pound rating, but the absence of a listed working height may matter when clearance is central to the job.

Listed on Amazon as: Lawn Mower Lift Jack, 800 Lbs Heavy Duty Zero Turn & Riding Mower Lift