Best Motorcycle Lifts For Trikes: Compare 10 Lifts

#1 · Best Overall

1. Black Widow ProLift Table

• Dimensions: 105.5 x 48 x 31.25 in
• Weight: 568 lb
• Load Capacity: 1500 lb
• Material: Steel

Best for: Air-equipped motorcycle workshop owners.

Why it ranks #1: Its 1,500-pound capacity, extra-wide platform, adjustable wheel clamp, and built-in tie-down points make it the most substantial candidate to investigate for trike use.

A pneumatic foot pedal raises this Black Widow table from 7 to 31.25 inches, giving a workshop a much taller service position than a center jack. The 1500-pound capacity and extra-wide platform are listed for motorcycle work, including cruiser and V-twin service, maintenance, and modifications.

The foot-pedal pneumatic system provides controlled raising through a broad height range, which can make extended service work less dependent on repeated hand cranking. It requires 90–110 PSI and an air compressor, so the shop needs compressed air available before operation. The adjustable wheel clamp, wheel vise, safety straps, and built-in tie-down point create a securing workflow on the platform; at 568 pounds, it is a substantial, freight-shipped shop fixture rather than a portable jack.

Skip it if you lack a compressed-air supply or need a portable jack; the 568-pound table requires shop space and freight delivery.

For an air-equipped workshop servicing motorcycles at a raised platform height, this table offers a substantial working range and several securing features. Its motorcycle listing does not confirm trike support, and its weight and air requirement limit where it fits.

Listed on Amazon as: Black Widow Motorcycle Lift Table, Pneumatic, 1,500 lb, ProLift, 31.25"

#2 · Highest Capacity

2. VIVOHOME Hydraulic Lift

• Dimensions: 14 x 27.5 x 15 in
• Weight: 59.4 lb
• Load Capacity: 1500 lb
• Material: Alloy Steel, Rubber

Best for: Hydraulic lifting with foot-pedal control.

Why it ranks #2: The 1,500-pound hydraulic lift has foot-pedal operation and includes two straps, but its 4.5-inch clearance requirement and trike fit need confirmation.

A foot-pedal hydraulic system raises this VIVOHOME lift to 14.8 inches, giving owners a hands-operated alternative to crank-style jacks. Its 1500-pound capacity and listed motorcycle, ATV, and scooter compatibility cover a range of two-wheel and small-vehicle maintenance, subject to the stated 4.5-inch minimum clearance.

The hydraulic pedal controls lifting through a 4.5-to-14.8-inch range, which the product associates with service access to tires, chains, forks, and undercarriages. Its 1500-pound limit accommodates a broader stated load than 1100-pound center jacks, while included straps provide additional securing equipment. Compatibility is conditional: the vehicle needs at least 4.5 inches of ground clearance, and the listing specifically excludes models with full lower fairings. Trike suitability is not stated.

Skip it if you have a model with full lower fairings or less than 4.5 inches of clearance; those conditions fall outside the listing.

This hydraulic jack suits owners of listed motorcycles, dirt bikes, ATVs, or scooters who want foot-pedal lifting and meet its clearance condition. The stated compatibility does not establish trike fit, and full lower fairings are excluded.

Listed on Amazon as: VIVOHOME 1500 LBS Hydraulic Motorcycle Lift Jack

#3 · Best With Dolly

3. VEVOR Lift with Dolly

• Dimensions: 18.1 x 17.3 x 4.9 in
• Weight: 41 lb
• Load Capacity: 1100 lb
• Material: Steel

Best for: Workshop users needing a wheeled jack.

Why it ranks #3: Its 1,100-pound capacity and included dolly offer a mobile center-jack setup, although the listing does not establish suitability for three-wheel support.

Casters distinguish this VEVOR scissor lift from the brand’s listed no-caster version, making repositioning around a garage part of its intended setup. The 1100-pound steel jack also includes a wide deck and tool tray, combining a manual center lift with features for a mobile maintenance station.

The caster-equipped style can help move the jack around a work area, while its 18.1-by-17.3-inch dimensions provide a broader overall footprint than the listed compact VEVOR version. The wide deck and tool tray keep the setup focused on garage repair, and the 1100-pound capacity covers the listed street, cruiser, and touring motorcycle categories. Its 41-pound weight is relevant when handling it between jobs; the supplied facts do not establish trike compatibility.

Skip it if you need a jack explicitly rated for trikes; this VEVOR listing names motorcycle types, not three-wheel vehicles.

Choose this VEVOR for motorcycle garage work when rolling the jack between work areas and keeping tools nearby matter. Its casters and tray add practical convenience, but the listing does not confirm that its deck supports a trike.

Listed on Amazon as: VEVOR Motorcycle Lift 1100lbs ATV Scissor Lift Jack with Dolly & Hand Crank | Garage Repair Center Hoist Crank Stand with Wide Deck and Tool Tray for Street Bikes, Cruiser Bikes, Touring Motorcycles

#4

4. VEVOR Scissor Lift

• Dimensions: 18.1 x 11 x 3.9 in
• Weight: 26 lb
• Load Capacity: 1100 lb
• Material: Steel

Best for: Compact manual center-jack users.

Why it ranks #4: This steel scissor jack supports up to 1,100 pounds and lifts from 3.7 to 13.8 inches, but its motorcycle-only compatibility leaves trike use unverified.

A 1100-pound capacity and a 3.7-to-13.8-inch lift range make this VEVOR scissor jack a compact option for raising supported motorcycles for garage maintenance. Its steel construction and wide deck provide a straightforward center-lift setup, while the safety pin adds a stated securing feature during use.

The manual crank operation needs no extra tools, so routine raising and lowering can happen without setting up a separate powered system. Its 18.1-by-11-inch footprint and 26-pound weight make it easier to handle and store than the full-size lift tables in this roundup. The 1100-pound limit and listed street, cruiser, and touring motorcycle compatibility define its stated scope; the supplied information does not establish trike compatibility.

Skip it if you need a lift explicitly rated for trikes; this listing names street, cruiser, and touring motorcycles only.

For motorcycle owners seeking a compact, manually operated center jack for cleaning or maintenance, this VEVOR offers a useful height range. Treat it as motorcycle equipment, not as a confirmed solution for supporting a trike.

Listed on Amazon as: VEVOR Motorcycle Lift, 1100 LBS Motorcycle Scissor Lift Jack with Wide Deck & Safety Pin, 3.7"-13.8" Center Hoist Crank Stand, Steel Scissor Jack for Street Bikes, Cruiser Bikes, Touring Motorcycles

#5 · Wide-Deck Scissor

5. VIVOHOME Scissor Lift

• Dimensions: 14.4 x 9 x 3.5 in
• Weight: 27.5 lb
• Load Capacity: 1100 lb
• Material: Rubber, Steel

Best for: Motorcycle and ATV crank-jack users.

Why it ranks #5: Its 1,100-pound capacity, adjustable plates, and stated ATV compatibility offer useful flexibility, but the listing does not specifically confirm trike compatibility.

Two adjustable screw adapters help the VIVOHOME scissor jack balance on uneven floors, a practical feature for owners who cannot rely on a perfectly level work surface. The steel-and-rubber stand supports up to 1100 pounds and adjusts from 3.5 to 14.5 inches for maintenance access.

The reinforced crank handle controls lifting and lowering manually, while the adjustable screw adapters provide a way to address uneven flooring when positioning the stand. Its 3.5-to-14.5-inch range supports varied maintenance heights, and the listed compatibility includes motorcycles and ATVs. The two adjustable plates are included, along with the crank handle and scissor lift. The product information does not list trikes, so its load capacity should not be treated as confirmation of three-wheel fit.

Skip it if you require explicit trike compatibility; this listing identifies motorcycles and ATVs, and does not specify three-wheel vehicles.

This VIVOHOME is a fit for motorcycle or ATV owners who value manual height control and adjustable adapters for uneven floors. Its stated vehicle categories stop short of trikes, so verify the intended support configuration before relying on it.

Listed on Amazon as: VIVOHOME 1100 LBS Motorcycle Lift Scissor Jack, Wide Deck Hoist Stand, Blue

#6

6. OMT Scissor Lift

• Dimensions: 1.57 x 10.24 x 4.33 in
• Weight: 12.8 kg
• Load Capacity: 1100 lb.
• Material: Rubber, Steel

Best for: Manual crank-and-socket users.

Why it ranks #6: The 1,100-pound jack lifts to 14.6 inches and includes a safety bar, but its listed vehicle compatibility is motorcycle rather than trike.

The OMT jack can be raised with its T-handle or a 3/8-inch socket and ratchet, giving motorcycle owners two manual ways to reach a height between 3.7 and 14.6 inches. Its 1100-pound capacity and included safety bar suit maintenance setups that prioritize a hand-operated center lift.

Choosing between the supplied T-handle and a 3/8-inch socket and ratchet lets the operator use the method that suits the workspace, without relying on a powered lift. The 1100-pound limit and rubber-and-steel construction support its listed motorcycle use, while the safety bar adds a securing component. The included chain brush, gloves, socket, and instructions provide useful accessories; the manufacturer recommends manual operation to extend screw life.

Skip it if you need confirmed trike support; the listing specifies motorcycles, while a shop table such as the Black Widow BW-PROLIFT lifts motorcycles to 31.25 inches.

This OMT suits motorcycle owners who want a manual jack with a choice of handle or socket operation and useful included accessories. Its stated application is motorcycles, so trike owners should not infer compatible support from the capacity alone.

Listed on Amazon as: OMT 1100lb Motorcycle Scissor Lift Jack Wide Deck Motorbike Hoist Stand

#7

7. SHMQYSY 1500-Pound Jack

• Dimensions: 16.93 x 5.24 x 10.55 in
• Weight: 34.2 lb
• Load Capacity: 1500 lb
• Material: Carbon Steel

Best for: Thick-pad heavy motorcycle jack users.

Why it ranks #7: Its 1,500-pound rating and thick rubber pads are notable, yet the floor jack has no listed trike compatibility or included components.

A 0.48-inch-thick top rubber pad is the defining feature of this SHMQYSY center jack, intended to protect against scratches while supporting a motorcycle. Its 1500-pound stated capacity, upgraded bearing, and anti-slip bottom combine lifting assistance with contact and floor protection features.

The upgraded bearing is specified to reduce friction and lifting effort, which can matter when raising a heavy motorcycle with a center jack. The thick top pad is intended to protect the vehicle’s contact area, while rubber pads underneath help protect the floor and resist slipping. Carbon-steel construction and a 1500-pound capacity define its basic support specification. The listing identifies motorcycle compatibility only and provides no included components, so trike fit and accessory needs remain unconfirmed.

Skip it if you need explicit trike compatibility or included lifting accessories; neither is established in this product’s listing.

This SHMQYSY suits motorcycle owners prioritizing a thick protective contact pad, reduced-friction bearing, and floor-gripping base. Its stated vehicle type is motorcycle, and the listing does not establish trike support or provide included components.

Listed on Amazon as: 1500 LBS Motorcycle Jack, Thickened 0.48" Rubber Pad Motorcycle Stand Lift, Upgraded Labor-Saving Bearing, Steel Motorcycle Center Stand with Carrying Handle and Anti-Slip Bottom for Heavy ATV

#8 · Lightweight Option

8. SOARSHARK Aluminum Lift

• Dimensions: 16.5 x 9 x 3.9 in
• Weight: 16 lb
• Load Capacity: 1100 lb
• Material: Aluminum, Carbon Steel

Best for: Lightweight reinforced-aluminum jack users.

Why it ranks #8: At 16 pounds, this 1,100-pound lift is lighter than the other listed jacks, but its motorcycle, ATV, snowmobile, and UTV compatibility omits trikes.

Aluminum construction keeps this SOARSHARK scissor lift at a listed 16 pounds, while two extra reinforcing shafts are intended to reduce movement at the scissor arms. Its 1100-pound capacity and included T-handle and socket offer a portable manual setup for listed motorcycles and other vehicles.

The aluminum and carbon-steel construction combines a lighter listed weight with reinforced components, making the jack easier to handle than the heavier lifts in this selection. Deep-step shafts and two extra reinforcing shafts are described as stabilizing the four scissor arms during maintenance. A 1100-pound capacity defines its limit, and the included 3/8-inch drive socket and T-handle give manual operating options. The listed vehicle types include motorcycles, ATVs, snowmobiles, and UTVs, but not trikes.

Skip it if you need a 1500-pound capacity; the VIVOHOME VH049 hydraulic lift is listed at that limit for vehicles meeting its clearance conditions.

This SOARSHARK suits owners who want a lighter manual jack with reinforced scissor arms and included operating tools. Its 1100-pound limit and listed vehicle categories should guide selection; trike support is not stated.

Listed on Amazon as: Aluminum Motorcycle Scissor Lift Jack, 1100LBS Heavy Duty (Blue)

#9

9. ZENY Scissor Lift

• Dimensions: 14.6 x 9 x 4.5 in
• Weight: 28 lb
• Load Capacity: 1100 lb
• Material: Alloy Steel

Best for: Rubber-deck manual jack users.

Why it ranks #9: The 1,100-pound steel jack has a 14.5-by-9-inch platform, but its listing names motorcycle compatibility only and gives no trike-specific guidance.

A nine-inch-wide platform with a rubber surface gives the ZENY scissor jack a broad, non-slip contact area for its listed motorcycle applications. Its simple crank operation and 1100-pound capacity suit owners seeking a basic garage, shop, or track-side lift rather than a powered table.

The 14.5-by-9-inch platform pairs a broad contact area with the listed rubber surface, which is intended to prevent slippage and scratching during use. Simple crank operation keeps the lifting workflow manual, and the 1100-pound capacity defines its stated load limit. Its alloy-steel construction provides a sturdy frame for the jack format, while compact 14.6-by-9-by-4.5-inch dimensions help with storage. The product is listed for motorcycles; trike compatibility is not specified.

Skip it if you need confirmed trike compatibility or a tall service table; this is a motorcycle scissor jack with a basic crank.

The ZENY suits motorcycle owners seeking a compact, manually cranked jack with a wide rubber platform for garage, shop, or track use. Its listing does not identify trikes, so the 1100-pound figure alone should not determine trike fit.

Listed on Amazon as: ZENY 1100 LB Wide Deck Motorcycle Center Scissor Lift Jack Repair Hoist Stand Bikes ATVs,Motorcycle Dirt Bike Scooter Crank Stand

#10

10. Extreme Max Wide Jack

• Dimensions: 18 x 10 x 4 in
• Weight: 12.39 kg
• Load Capacity: 1000 lb
• Material: Alloy Steel

Best for: Motorcycle-only wide-jack shoppers.

Why it ranks #10: Although its wide 15-1/8-by-9-inch platform and 1,000-pound rating suit some motorcycles, the listing explicitly says it will not lift trikes.

The Extreme Max listing plainly states that this scissor jack will not lift trikes, making its vehicle boundary unusually clear for a trike-focused roundup. For motorcycle maintenance, its 151⁄8-by-9-inch padded platform and manual extension to 14 inches provide a wide contact area and raised service position.

The rubber padding on the platform is intended to protect against scratching, while the 151⁄8-by-9-inch surface gives the motorcycle a broad contact area. A hand-operated 7/8-inch worm drive raises the jack to 14 inches without a powered setup; the listing warns against using an impact wrench or powered drill. The specified capacity is 1000 pounds, despite the title’s 1100-pound wording. Its explicit exclusion of trikes makes vehicle fit decisive.

Skip it if you own a trike; this listing explicitly says it will not lift trikes.

This Extreme Max jack is only a candidate for motorcycle owners who need a wide, padded manual center lift. It is not a trike lift: the listing explicitly excludes trikes, and the stated capacity is 1000 pounds.

Listed on Amazon as: Extreme Max 5001.5044 1100 lb. Motorcycle Scissors Jack – Wide