Best Hitch Lift For Mobility Scooter: 10 Options Compared

#1 · Best Overall

1. Rockland Electric Mobility Carrier

• Weight: 114.7 lb
• Load Capacity: 350 lb
• Material: Alloy Steel, Aluminum
• Compatible with Vehicle Type: Car, SUV, Van

Best for: Button-operated daily loading.

Why it ranks #1: Button-controlled lifting, a manual backup crank, and a 350-pound capacity suit powered scooter transport; its platform extends from 38 to 44 inches.

Button-controlled raising and lowering lets you load or unload a mobility device without manually lifting it onto the carrier. The Rockland supports up to 350 pounds on a 38-by-28-inch platform that extends to 44 inches, offering adjustable loading space for compatible scooters and wheelchairs.

A standard 7-way plug powers the electric lift, while the included manual backup crank provides another way to operate it. The platform folds up or tilts down, which can help when changing between carrying and access positions. Self-tensioning retractors, an LED warning light, and a license plate holder are included. At 114.7 pounds, the carrier itself is a substantial item to handle during installation or removal.

Skip it if you need a lighter carrier to handle off the vehicle; the VEVOR aluminum carrier weighs 52.3 pounds.

This suits scooter or wheelchair owners who want powered loading, a manual backup, and a platform that can fold or tilt. Its 350-pound capacity and Class II-or-higher hitch requirement are key fit boundaries.

Listed on Amazon as: Rockland Electric Mobility Scooter Carrier, 350 lb Capacity, Hitch Mount

#2 · Lightweight Aluminum

2. Silver Spring Aluminum Carrier

• Weight: 46 lb
• Load Capacity: 500 lb
• Material: Aluminum
• Compatible with Vehicle Type: Scooter, Trailer

Best for: Traction-focused aluminum ramp.

Why it ranks #2: This 500-pound carrier weighs 46 pounds and uses a ramp with 3-inch-wide rungs, side rails, and four tie-down points.

Three-inch-wide ramp rungs add traction during loading while limiting dirt and debris buildup, giving the Silver Spring carrier a practical ramp detail. Its aluminum platform and powder-coated steel construction support mobility devices up to 500 pounds, with side rails to contain the load.

The 48-by-28-by-9.5-inch carrier includes 7.5-inch side rails and four aluminum ring tie-down points, helping position and secure a mobility device. An anti-rattle device addresses wobble and tilt at the hitch connection. The ramp's wide rungs provide grip while allowing dirt and debris to pass through. The listing specifies use with a Class III or IV 2-inch hitch receiver, a firm vehicle-fit requirement.

Skip it if you have a Class II hitch and want a carrier rated for Class II or higher; the Rockland 10101194-One Box-New1 lists that compatibility.

This suits buyers who want a ramp with traction-focused rungs, side rails, and four tie-down points. Its 500-pound rating is paired with a Class III or IV 2-inch receiver requirement, which determines vehicle compatibility.

Listed on Amazon as: Wheelchair Scooter Carrier w/Ramp, Car Truck SUV, 500 lb Cap, Silver Spring

#3 · Most Tie-Down Points

3. Silver Spring Folding Steel Carrier

• Weight: 82 lb
• Load Capacity: 500 lb
• Material: Steel
• Compatible with Vehicle Type: Car, Truck

Best for: Stable ramp transport.

Why it ranks #3: The steel carrier supports 500 pounds and has a 42-inch ramp, ten tie-down points, and an anti-rattle device.

Ten tie-down points give the Silver Spring carrier multiple places to secure a mobility device after rolling it up the 42-inch ramp. Its steel frame supports up to 500 pounds, combining a folding loading surface with features intended to limit movement during transport.

The 42-by-27.75-inch ramp folds flat when not in use, helping preserve access to a vehicle's trunk or hatch. An anti-rattle device and secure hitch pin address shaking at the connection, while ten tie-down points provide several securing locations. The powder-coated steel frame is specified for all-weather use and rust and wear resistance. At 82 pounds, it is a considerable carrier to move when not mounted.

Skip it if you need powered loading or a lighter aluminum rack; the VEVOR XAFG1BZCQ405001 weighs 52.3 pounds and has a folding ramp.

This fits buyers who want a ramp, numerous tie-down locations, and features to reduce hitch movement. Account for its 82-pound weight and confirm the vehicle and loading setup can accommodate the carrier.

Listed on Amazon as: Silver Spring Folding Steel Wheelchair Scooter Carrier, 500 lb, 42 In Ramp

#4 · Lightest Listed Carrier

4. VEVOR Aluminum Carrier

• Weight: 52.3 lb
• Load Capacity: 500 lb
• Material: Aluminum
• Compatible with Vehicle Type: Truck SUV Car

Best for: Lightweight aluminum ramp rack.

Why it ranks #4: Its aluminum frame is listed at 52.3 pounds with a 500-pound capacity; the 50-by-29.5-inch platform has a folding ramp.

At 52.3 pounds, the VEVOR aluminum carrier is lighter than many listed steel ramp carriers while supporting loads up to 500 pounds. Its 50-by-29.53-inch platform serves wheelchairs, electric scooters, and other mobility equipment, with a ramp that folds flat or upright.

The ramp's two folding positions let you choose a compact upright arrangement or fold it flat against the platform after use. The 50-by-29.53-inch loading area provides room for mobility equipment, and the 500-pound rating sets the stated load limit. Aluminum construction keeps the listed carrier weight to 52.3 pounds. It fits a 2-inch receiver on a car, truck, or SUV, so both receiver size and vehicle type inform installation planning.

Skip it if you want an included set of ratchet straps; the Mockins MA-HC-ALU-RMP-50X29-128 lists two straps with hooks.

This is a practical match for buyers seeking an aluminum ramp carrier with two folding positions and a 500-pound rating. It requires a 2-inch receiver, and the ramp must be secured in its folded or upright position.

Listed on Amazon as: VEVOR Hitch Mount Wheelchair Carrier, 500LBS Mobility Scooter Carrier with Folding Ramp, Aluminum Hitch Cargo Rack Basket & Stabilizer Kit, Fits 2" Receiver for Truck SUV Car, 50" x 29.5" x 8.9"

#5

5. Mockins Aluminum Carrier

• Weight: 51 lb
• Load Capacity: 500 lb
• Material: Aluminum
• Compatible with Vehicle Type: Car, Truck, Van

Best for: Aluminum carrier with straps.

Why it ranks #5: The 500-pound aluminum carrier measures 50 by 29 inches and includes a hitch lock, stabilizer, and two ratchet straps.

Aluminum construction keeps the Mockins ramp carrier's listed weight to 51 pounds while it supports up to 500 pounds. Its 50-by-29-inch platform and included ratchet straps with hooks make it a flexible option for transporting mobility equipment or other listed cargo.

The carrier fits a standard 2-inch receiver and has a rust-resistant finish for moisture defense, supporting use in damp conditions. Its aluminum platform measures 50 by 29 inches and is 8 inches high, while the steel hitch arm connects it to the vehicle. A hitch lock, stabilizer, reflective strips, and two ratchet straps with hooks are included. The 51-pound listed weight is relevant when removing or reinstalling the rack.

Skip it if you want four ratchet straps and four loop straps; the Mockins MA-HC-RMP-48X28X4-07-V1 includes both sets.

This suits buyers seeking an aluminum ramp carrier with a 500-pound capacity and securing accessories included. Check the standard 2-inch receiver requirement and account for the listed 51-pound weight when handling the carrier.

Listed on Amazon as: Mockins 50"x29"x8" Durable Aluminum Trailer Hitch Cargo Carrier with Ramp

#6

6. Mockins Folding Steel Carrier

• Weight: 76 lb
• Load Capacity: 500 lb
• Material: Steel
• Compatible with Vehicle Type: Car, Truck, Van

Best for: Foldable weather-resistant ramp.

Why it ranks #6: This steel ramp carrier supports 500 pounds, fits a 2-inch receiver, and includes a hitch stabilizer and four ratchet straps.

A ramp-equipped platform that expands to 95 inches long gives the Mockins carrier an extended loading surface while remaining foldable for storage. It supports up to 500 pounds and fits a 2-inch receiver with a 4-inch arm raise, a specific combination to check against the vehicle.

The steel construction has an anti-rust, weatherproof finish, supporting outdoor use in varied conditions. Four heavy-duty ratchet straps and four loop straps provide included ways to secure cargo, while the hitch stabilizer and locking hitch pin address the connection. A license plate bracket and reflective stickers are also supplied. The listed carrier weight is 76 pounds, so moving it on or off the vehicle calls for handling a substantial component.

Skip it if you need an aluminum carrier that weighs less; the Mockins MA-HC-ALU-RMP-50X29-128 is listed at 51 pounds.

This is for buyers needing a long, foldable ramp carrier with straps included for a mobility device or cargo. Its 2-inch receiver and 4-inch arm raise requirements, along with its 76-pound weight, shape vehicle fit and handling.

Listed on Amazon as: Mockins 500lb Capacity Trailer Hitch Cargo Carrier with Ramp for Wheelchair

#7

7. ECOTRIC Folding Ramp Carrier

• Weight: 67.3 lb
• Load Capacity: 500 lb
• Material: Alloy Steel

Best for: High-capacity ramp loading.

Why it ranks #7: The 500-pound steel carrier has a 26.8-by-46.2-inch platform and a 38.7-inch ramp, with a 2-inch receiver fit.

A 500-pound capacity gives the ECOTRIC carrier room for substantial mobility equipment, while its folding ramp lets you roll a scooter or wheelchair onto the platform. The 46.2-by-26.8-inch platform and 38.7-inch extended ramp make it a ramp-style alternative to powered lifting.

The carrier attaches to a 2-inch hitch receiver, so it suits vehicles with that receiver size rather than a powered lift setup. Its alloy-steel construction supports the stated 500-pound load capacity, while the folding ramp provides a rolling route onto the platform. The carrier weighs 67.3 pounds and its gate weighs 16 pounds, figures worth considering when handling or storing the pieces between trips.

Skip it if you want powered loading rather than a ramp; the Rockland 10101194-One Box-New1 raises and lowers by button.

Choose this for a vehicle with a 2-inch receiver and a mobility device suited to its platform and 500-pound limit. The folding ramp favors buyers comfortable with ramp loading and handling its 16-pound gate.

Listed on Amazon as: ECOTRIC 46.2 X 26.8 X 38.7 Inch Hitch Cargo Carrier W/Ramp Foldable 500 Lbs

#8

8. EGO BIKE Folding Carrier

• Weight: 75 lb
• Load Capacity: 5E+2 lb
• Material: Alloy Steel

Best for: Three-position foldaway ramp.

Why it ranks #8: This 500-pound alloy-steel carrier fits a 2-inch hitch and offers three positions: closed flat, open L-shape, and open flat.

Three carrier positions—closed flat, open L-shape, and open flat—let the EGO BIKE rack change configuration without removing it from the vehicle. Its ramp has a welded handle for folding and unfolding, and the alloy-steel carrier is rated for a 500-pound load.

The carrier attaches to a 2-inch hitch receiver, making receiver size a key vehicle-fit requirement. When not in use, it can lock flat, which the listing says helps with parking and garage access without removing the carrier. The ramp's welded handle supports folding and unfolding, while its three positions offer alternate ways to stow or open the platform. At 75 pounds, the carrier still requires handling when installation or removal is needed.

Skip it if you need a lighter aluminum platform; the VEVOR XAFG1BZCQ405001 is listed at 52.3 pounds and has a folding ramp.

This suits buyers who want a ramp carrier that can remain on the vehicle and fold flat for parking or garage access. Check the 2-inch receiver requirement and consider the 75-pound weight when planning installation.

Listed on Amazon as: New Mobility Carrier Ramp Hitch Mounted 46.2 x 26.8 x 38.7 500 lbs for

#9

9. KUAFU Folding Steel Carrier

• Load Capacity: 5E+2 lb
• Material: Steel
• Compatible with Vehicle Type: Car, Trailer

Best for: Three-position steel ramp carrier.

Why it ranks #9: The steel carrier is rated for 500 pounds and has a three-position folding ramp with tie-down holes along its sides.

A three-position folding arrangement lets the KUAFU carrier sit closed flat, open in an L-shape, or open flat for loading. Its ramp also locks flat when unused, providing a way to keep the carrier attached while changing its configuration.

The steel construction has a black powder-coated finish, and the carrier is listed with a 500-pound capacity. Tie-down straps can hook into holes along the ramp sides, giving owners multiple securing locations for a mobility device. A handle on the ramp supports folding and unfolding, while the flat-locking feature provides a stowed configuration. The listing does not provide platform dimensions, so buyers cannot compare its loading area from the supplied specifications.

Skip it if you need a stated platform size before comparing loading space; the Silver Spring SC400-V2 specifies a 42-by-27.75-inch ramp.

This suits buyers who value a steel carrier with several folding positions and ramp-side tie-down holes. The supplied listing gives no platform dimensions, so it offers less information for judging loading-area fit.

Listed on Amazon as: KUAFU Trailer Hitch Folding Mobility Scooter Carrier Rack Luggage Basket Lift Rack Loading Ramp Wheelchair Carrier Mount Steel

#10

10. Lift Caddy Motorized Hitch Lift

• Weight: 40 lb
• Load Capacity: 200 lb
• Material: Alloy Steel
• Compatible with Vehicle Type: Trucks, SUVs, Recreational Vehicles

Best for: Powered loading for rack owners.

Why it ranks #10: Although motorized and described for scooters, its 200-pound capacity and bike-rack loading design make it less suited to a mobility-scooter carrier search.

Button-operated powered lifting helps move bikes or mobility scooters onto or off a compatible bike rack, avoiding manual lifting. The Lift Caddy attaches to a 2-inch trailer hitch and supports up to 200 pounds, making it a lift accessory rather than a full carrier platform.

Its 37.2-by-13.19-inch dimensions and 200-pound capacity define the listed equipment limits, while the product description says it accepts bike racks and rolls loads on and off. The included locking anti-rattle hitch pin supports the hitch connection. It is specified for trucks, SUVs, and recreational vehicles with a 2-inch hitch. Because it is intended for use with an existing rack, buyers need that separate rack as part of their loading setup.

Skip it if you need a 500-pound ramp carrier; the Silver Spring WCC-500A has a 500-pound capacity and loading ramp.

This fits owners of a compatible existing rack who want powered assistance loading bikes or mobility scooters within 200 pounds. It is not a standalone cargo platform, and the 2-inch hitch and rack setup matter.

Listed on Amazon as: Electric Bike Lift, Motorized Hitch Lift – Easily Load Heavy Ebikes and Scooters onto Your Tow Hitch Rack