Best Hydraulic Jack Plate For 115 Hp Outboard

#1 · Best Overall

1. RisWhiteMeteors 6-inch Plate

Best for: Broad-brand 115 hp fit.

Why it ranks #1: Its stated 10–150 hp range includes a 115 hp outboard, with 6.7 inches of travel, a manual release valve, and a listed 12-month warranty.

Compatibility with outboards from 10 to 150 hp puts this RisWhiteMeteors plate within range for a 115 hp engine, while its 6.7 inches of vertical travel enables height adjustment across boating conditions. Electric hydraulic operation raises or lowers the motor without manual repositioning.

The stated compatibility includes many Mercury, Yamaha, Suzuki, and Honda engines, giving buyers of those brands a concrete starting point for a 115 hp setup. Its 6.7-inch vertical travel supplies room to alter mounting height for different boating conditions. Electric hydraulic lifting changes the motor height without manual repositioning, and the built-in manual release valve provides a manual release option. The listed 150 hp maximum is the key capacity boundary for this model.

Skip it if you need a setback dimension or load rating stated before choosing; the listing provides neither, while Bob’s Machine 100-106010 specifies a 6-inch setback and 625-pound capacity.

This is a candidate for owners of a 115 hp Mercury, Yamaha, Suzuki, or Honda seeking electric hydraulic height adjustment. Its stated ceiling is 150 hp, so it offers less horsepower headroom than higher-rated plates.

Listed on Amazon as: 6" Electric Hydraulic Jack Plate for 10-150 HP Outboard Motors, 6.7 Inch Vertical Travel, Manual Release Valve, Universal Fit ZZ001

#2 · 150 hp Match

2. Winibo 8-inch 150 hp Plate

• Dimensions: 16.54 x 11.02 x 17.72 in
• Weight: 44.5 lb
• Load Capacity: 7055 lb
• Material: Aluminum-Alloy, Stainless Steel

Best for: Saltwater-focused electric lift.

Why it ranks #2: Rated for outboards up to 150 hp, it offers 6.69 inches of stepless lift and lists corrosion-protection treatments for marine use.

Electrophoresis coating and anodic protection give this Winibo plate corrosion-focused protection for harsh saltwater environments, while one-touch control operates its 6.69-inch stepless vertical lift. That combination enables convenient motor-height changes with a stated protective treatment for marine use.

The 8-inch setback and 6.69-inch stepless travel provide distinct dimensions for planning both motor placement and height adjustment. One-touch control lets the operator raise or lower the motor with a button press, rather than manually repositioning it. The plate is rated for outboards up to 150 hp, which includes a 115 hp engine, and its listed 7,055-pound lifting capacity describes its lifting capability. Aluminum-alloy and stainless-steel construction accompany the coating and anodic protection.

Skip it if you need a 300 hp rating or more than 6.69 inches of vertical travel; Winibo’s JPH3500 lists 350 hp capacity and 7.5 inches of lift.

Consider this for a 115 hp outboard used in saltwater where treated surfaces and button-operated adjustment matter. Its 150 hp ceiling and 6.69-inch travel are the relevant boundaries when planning capacity and movement.

Listed on Amazon as: 8" Electric Hydraulic Jack Plate for Outboard Motor up to 150HP

#3 · Compact Setback

3. Bob's Machine 6-inch Action Plate

• Dimensions: 6.02 x 16.73 x 13.78 in
• Weight: 23 kg
• Load Capacity: 23 kg
• Material: Metal

Best for: Compact setback, integrated pump.

Why it ranks #3: Its 6-inch setback and integrated hydraulic pump suit buyers seeking a short setback; the plate is rated up to 300 hp and lists 7.5 inches total lift.

An internal hydraulic pump removes the need for a separate pump mount, while this Bob’s Machine plate combines a 6-inch setback with 7.5 inches of total lift. For a 115 hp outboard, that setup enables adjustable motor positioning without adding a separate pump mount to the rigging arrangement.

The one-piece plate provides 1.5 inches of built-in lift and 6 inches of adjustable travel, giving you a defined range for changing outboard height. Its 6-inch setback keeps the plate’s extension more compact than the 10- and 12-inch versions in this range. The integrated pump also avoids a separate pump mount, which can simplify the rigging layout. Its 300 hp and 625-pound ratings provide capacity well beyond a 115 hp engine.

Skip it if you need a setback longer than 6 inches; Bob’s Machine’s 10-inch 100-111000 is a closer match for that layout.

Choose this for a 115 hp boat needing hydraulic height adjustment, an integrated pump, and a compact 6-inch setback. Its 7.5 inches of total lift offer adjustment, but the shorter setback may not suit layouts needing more extension.

Listed on Amazon as: Bob's Machine 6 in Jac Plate 100-106010, 6 in Setback – Rated up to 300 HP

#4 · Installation Kit

4. Bob's Machine 6-inch Standard Plate

• Weight: 70 lb
• Load Capacity: 300 hp
• Material: Alloy Steel

Best for: Complete standard-plate rigging.

Why it ranks #4: The 6-inch setback and 7.5 inches of lift are relevant to this setup, and listed components include a pump, wiring harness, hoses, switch, and oil.

The supplied pump, wiring harness, hoses, control switch, and oil make this Bob’s Machine standard plate a complete listed rigging package. Its 6-inch setback and 7.5 inches of lift enable hydraulic outboard adjustment, while its 300 hp and 625-pound compatibility includes a 115 hp motor.

The included pump, harness, hoses, switch, and oil give buyers a defined set of components for setting up the hydraulic plate. The remote-mount pump stays dry and secure in an internal location, reducing wear according to the listing. A 6-inch setback keeps the extension compact, and the 7.5-inch lift supplies adjustment range for positioning the motor. Alloy steel construction and compatibility with engines up to 300 hp and 625 pounds complete the stated fit details.

Skip it if you prefer an integrated pump that eliminates a separate mount; Bob’s Machine 100-106010 uses an integrated internal pump with a 6-inch setback.

This suits a 115 hp owner wanting a listed pump-and-control package and 6-inch setback with hydraulic lift. Its remote-mount pump arrangement is the key rigging distinction to consider.

Listed on Amazon as: Bob's Machine 100-106000 Standard Hydraulic Jack Plate 6" Setback 300HP Outboard

#5

5. Volantixi 8-inch Action Plate

• Dimensions: 18.5 x 14.17 x 13.39 in
• Material: Aluminum

Best for: Fast-lift 8-inch setup.

Why it ranks #5: Its 8-inch setback, 7.5-inch lift, and 300 hp maximum provide clear specifications, though the stated capacity is well above a 115 hp motor.

This Volantixi Action Series plate states that it lifts heavy outboards under full power within six seconds, pairing that operating speed with 7.5 inches of vertical lift. Its 8-inch setback and 300 hp rating put a 115 hp motor within the listed capacity range.

The one-piece design has an internally mounted hydraulic pump, which the listing connects to simple rigging and avoids the need for extra C-channels to extend setback. Its 1.5-inch built-in lift plus 6 inches of adjustable travel make up the stated 7.5-inch vertical range. The 8-inch setback defines the plate’s extension, while the 300 hp and 625-pound ratings provide capacity headroom for a 115 hp outboard. The plate itself weighs 56 pounds.

Skip it if you need a lighter listed plate; Bob’s Machine 100-106010 lists a 23 kg weight and a 6-inch setback.

This fits a 115 hp owner who values the stated six-second lift, internal pump, and 8-inch setback. Account for the listed 56-pound plate weight when planning installation and transom setup.

Listed on Amazon as: 100-108001 Action Series Hydraulic Jack Plate, 8 Inch Setback, Max 300 HP, 7.5" Lift for Outboard Motors, Up to 625 lbs

#6 · Shortest Setback

6. T-H Marine Atlas 4-inch Plate

• Dimensions: 21.5 x 18.5 x 6.75 in
• Weight: 51 lb
• Load Capacity: 625 lb
• Material: Aluminum

Best for: Compact Atlas hydraulic plate.

Why it ranks #6: The 4-inch setback is the shortest stated here, and its 625-pound load capacity is listed; the plate is designed for outboards up to 300 hp.

The Atlas plate’s 4-inch setback is the shortest specified dimension in this group, giving a 115 hp owner a compact extension behind the transom. Its aluminum construction and heavy-duty description pair that compact footprint with a hydraulic plate rated for loads up to 625 pounds.

A 4-inch setback can suit buyers who want a shorter plate extension than the 6-, 8-, 10-, or 12-inch options listed elsewhere. The one-piece design uses a Rod and Slot lifting system, which the description says handles stresses from heavy, powerful outboards. The product is rated up to 300 hp or 625 pounds, so a 115 hp engine falls well below its stated horsepower ceiling. Quick and simple installation is also claimed in the listing.

Skip it if you need at least 8 inches of setback; Bob’s Machine 100-108001 specifies an 8-inch setback and 7.5-inch lift.

Consider this Atlas for a 115 hp boat where a 4-inch setback is the priority and a hydraulic plate rated well above the engine’s horsepower is suitable. Its limited setback is the key layout boundary.

Listed on Amazon as: Atlas AHJ-4V-B-DP Hydraulic Jack Plate Setback – Black, 4"

#7

7. Bob's Machine 10-inch Action Plate

• Dimensions: 10 x 16.73 x 13.78 in
• Weight: 27 kg
• Load Capacity: 61 lb
• Material: Aluminum

Best for: 10-inch setback, 7.5-inch lift.

Why it ranks #7: It offers 7.5 inches of total lift and an integrated pump, but its 10-inch setback may not suit boats that need a shorter extension.

This Bob’s Machine plate combines a 10-inch setback with 7.5 inches of total lift, enabling motor-height adjustment on a longer-extension setup. Its internal hydraulic pump also eliminates the need for a separate pump mount, while the 300 hp rating covers a 115 hp outboard.

The plate’s 1.5 inches of built-in lift plus 6 inches of adjustable travel provide the full stated 7.5-inch range for positioning the outboard. A 10-inch setback defines its extension from the transom, useful for buyers who need more reach than the 6-inch version. The integrated pump keeps a separate pump mount out of the rigging arrangement. Its 300 hp rating provides headroom, though the listing’s load-capacity specification is inconsistent with the stated 625-pound motor capacity in the features.

Skip it if you need an unambiguous listed load-capacity specification; Bob’s Machine 100-106010 lists a 6-inch setback and 625-pound maximum in its features.

Choose this for a 115 hp setup needing 10 inches of setback, 7.5 inches of lift, and an integrated pump. Resolve the conflicting load-capacity information before relying on its stated weight rating.

Listed on Amazon as: Bob's Machine 10 in Jac Plate 100-111000, 10 in Setback Rated up to 300 HP

#8

8. Bob's Machine 12-inch Action Plate

• Weight: 66 lb

Best for: Long setback, internal pump.

Why it ranks #8: Its integrated pump and 7.5 inches of total lift are useful, but the 12-inch setback is the longest listed and may be excessive for some boats.

A 12-inch setback extends this Bob’s Machine plate farther than its 6-inch counterpart, while the integrated hydraulic pump eliminates a separate pump mount. Its 7.5 inches of total lift lets a 115 hp operator adjust motor position within a plate rated for much larger outboards.

The one-piece construction combines 1.5 inches of built-in lift with 6 inches of adjustable travel, giving the operator a specified 7.5-inch lift range. A 12-inch setback provides the longer extension for transom layouts that call for it. The internal pump keeps a separate pump mount out of the rigging plan. Rated up to 300 hp and 625 pounds, the plate has substantial capacity headroom for a 115 hp motor.

Skip it if you need a compact 6-inch setback; Bob’s Machine 100-106010 uses that shorter setback with the same stated total lift.

Choose this for a 115 hp boat whose layout calls for a 12-inch setback and whose operator wants hydraulic height adjustment without a separate pump mount. The longer extension is the main fit consideration.

Listed on Amazon as: Bob's Machine 12 in Jac Plate 100-112112, 12 in Setback Rated up to 300 HP

#9

9. T-H Marine Atlas 10-inch Plate

• Dimensions: 20.5 x 18.2 x 11.8 in
• Weight: 69 lb
• Load Capacity: 625 lb
• Material: Plastic

Best for: 10-inch Atlas setback.

Why it ranks #9: This Atlas plate provides a 10-inch setback and lists 625-pound capacity, but its listing gives less lift detail than several higher-ranked alternatives.

A 10-inch setback gives this T-H Marine Atlas plate a longer specified extension for transom layouts that call for it. The hydraulic plate is listed with a 625-pound load capacity and quick, simple installation, making it a high-capacity option for a 115 hp outboard.

The 10-inch setback is the defining fit dimension, so it belongs on a boat whose layout benefits from that extension rather than a more compact plate. Its 625-pound load capacity provides a stated weight limit to consider alongside the outboard and rigging. T-H Marine describes installation as quick and simple, a useful consideration when planning the setup. The listing identifies a hydraulic Atlas plate but does not specify vertical travel or a horsepower maximum, so those remain selection boundaries.

Skip it if you need a stated lift range before choosing; Bob’s Machine 100-111000 specifies 7.5 inches of total lift and a 10-inch setback.

This may suit a 115 hp boat needing a 10-inch setback and a plate with a stated 625-pound capacity. The listing does not give vertical travel or a horsepower ceiling, so those details are boundaries.

Listed on Amazon as: T-H Marine Atlas AHJ-10V-B-DP Hydraulic Jack Plate – Black, 10"

#10

10. Winibo 8-inch 350 hp Plate

• Load Capacity: 625 lb
• Material: Aluminum, Stainless Steel

Best for: High-capacity electric adjustment.

Why it ranks #10: Its 8-inch setback and 7.5 inches of lift are specified, but its 350 hp rating is a less targeted match than models listed for 150 hp.

A 350 hp rating gives this Winibo electric hydraulic plate substantial capacity headroom for a 115 hp outboard, and one-touch control operates its 7.5 inches of total vertical lift. Its aluminum and stainless-steel materials are paired with electrophoresis coating and anodic protection.

The listed lift combines 1.5 inches of built-in height with 6 inches of adjustable travel, letting the operator change motor position through a defined 7.5-inch range. One-touch operation makes raising or lowering the plate a button-controlled task. A 625-pound load capacity accompanies the 350 hp rating, while the coating and anodic protection are specified for corrosion resistance in harsh saltwater environments. The 8-inch setback is an important dimension for transom planning.

Skip it if you need a setback under 8 inches; Bob’s Machine 100-106010 specifies a 6-inch setback for a more compact extension.

This suits a 115 hp owner seeking electric one-touch adjustment, substantial capacity headroom, and stated corrosion protection. Check the 8-inch setback against the boat’s transom layout before selecting this plate.

Listed on Amazon as: 8" Electric Hydraulic Jack Plate for Outboard Motor up to 350HP