Best Jack Plates For Small Outboards: 10 Options Compared

#1 · Best Overall

1. T-H Marine Mini Jacker

• Material: Aluminum
• Weight: 10.8 lb

Best for: Three-inch vertical offset.

Why it ranks #1: Designed for clamp-on outboards up to 35 HP, with a specified 4-inch setback and 3-inch vertical offset for short-transom applications.

A 3-inch vertical offset paired with a 4-inch stand-off makes the T-H Marine Mini Jacker unusually specific about its mounting geometry. Its cast-aluminum clamp-style bracket is intended for outboards up to 35 HP or 150 pounds, particularly where a short transom needs an offset motor position.

The 4-inch stand-off moves the motor away from the transom, while the 3-inch vertical offset supplies a defined height difference; the listing connects this arrangement with quicker planing and speed. Cast aluminum provides the stated bracket material, and the clamp-style format is specifically for clamp-on outboards. The 35 HP or 150-pound limit sets the application boundary, so this is best evaluated against both the motor's mounting style and its listed capacity.

Skip it if you have an outboard that is not clamp-on mounted; the Winibo JP5400C is listed for boat mounting and specifies top-bolt height adjustment.

A fit for small-boat owners who need a clamp-style plate with both setback and vertical offset specified. Check the clamp-on requirement and 35 HP or 150-pound limit against the outboard before selecting it.

Listed on Amazon as: T-H Marine Mini Jacker Small Outboard Jack Plate – Cast Aluminum Clamp-On Motor Bracket for Up to 35 HP or 150 lb – 4 in Setback and 3 in Vertical Offset for Short Transom Boats

#2 · Best Block Included

2. Camoo MJ-1-DP

• Material: Cast Aluminum, Marine Grade Transom Block
• Weight: 5.24 kg
• Load Capacity: 1.5E+2 lb

Best for: Short-transom clamp-on setups.

Why it ranks #2: Fits clamp-on motors up to 35 HP and includes a pre-cut, pre-grooved marine-grade wooden block; its stated load capacity is 150 pounds.

A pre-cut, pre-grooved marine-grade wooden block comes with this cast-aluminum 4-inch-setback plate, helping create a firmer mounting interface as you pair a long-shaft motor with a shorter transom. It is intended for clamp-on outboards up to 35 HP and suits skiffs, aluminum boats, and inflatables.

The cast-aluminum offset plate provides the 4-inch setback, while the included wooden block is shaped for the jack plate and helps make installation more secure. That combination is useful when a long-shaft outboard needs to sit on a shorter-shaft transom without sourcing a separate block. Its stated clamp-on application and 35 HP limit make the intended motor setup clear; the listed compatible boats include skiffs, aluminum boats, and inflatables.

Skip it if you need a plate rated above 35 HP or one specified for a non-clamp-on motor; this model is listed for clamp-on engines up to 35 HP.

For owners mounting a clamp-on outboard up to 35 HP on a short-transom skiff, aluminum boat, or inflatable, the included fitted block is useful. Keep the clamp-on requirement and horsepower ceiling in mind.

Listed on Amazon as: MJ-1-DP 4'' Setback Small Engine Jack Plate for Outboard Motors Up to 35HP

#3 · Best Manual Lift

3. QNCKJZV MJ-1-DP

• Material: Cast Aluminum, Marine Grade Transom Block
• Weight: 5.24 kg
• Load Capacity: 150 lb

Best for: Block-included short transoms.

Why it ranks #3: Targets clamp-on outboards up to 35 HP and includes a marine-grade wooden mounting block, with a listed 150-pound load capacity.

The included pre-cut, pre-grooved wooden mounting block is the defining convenience of this QNCKJZV 4-inch-setback plate. Its cast-aluminum offset design is specified for clamp-on outboards up to 35 HP, allowing a long-shaft motor to mount on a shorter-shaft transom on skiffs, aluminum boats, and inflatables.

The shaped marine-grade block is supplied with the cast-aluminum plate, so buyers get the two listed mounting components together rather than needing to source a separate block. The offset design provides 4 inches of setback and is intended to bridge the difference between long-shaft motors and short-shaft transoms. Its stated 35 HP limit and clamp-on application narrow the fit, while the included block supports a more secure installation on the listed small-boat types.

Skip it if you run an outboard above 35 HP; the GELUOXI plate lists a 225 HP maximum instead of this model's small-engine limit.

A practical match for owners of clamp-on outboards up to 35 HP who need a 4-inch offset and a supplied mounting block. Its fit is specifically framed around shorter transoms and small boats.

Listed on Amazon as: MJ-1-DP 4'' Setback Jack Plate for Outboard Motors Up to 35HP – Manual Lift System with Wooden Mounting Block Included – Enhance Engine Performance & Distance from Transom

#4 · Best Jon Boat Fit

4. Bzcovac MJ-1-DP

• Material: Aluminum
• Weight: 10.6 lb
• Load Capacity: 150 lbs

Best for: Wood-block shallow-water setups.

Why it ranks #4: Lists aluminum boats, jon boats, kayaks, and shallow-water skiffs as compatible, plus a 150-pound capacity and laminated wood block.

The supplied laminated-wood mounting block and cast-aluminum plate make this Bzcovac MJ-1-DP a complete listed component pairing for transom mounting. Its 4-inch setback and stated height-and-position tuning aim to help position an outboard relative to the water, with aluminum and jon boats among the named uses.

The listing explains that raising and repositioning the motor can reduce drag and cavitation while improving propeller efficiency, linking adjustment to practical operation rather than just geometry. The 4-inch setback provides a specified offset, and the included laminated wood accompanies the cast-aluminum plate for installation. The product is listed for aluminum boats, jon boats, kayaks, and shallow-water skiffs, but its specification also calls the style fixed, which conflicts with the adjustment language and merits attention.

Skip it if you need an unambiguous height-adjustment specification; the VELCKING plate clearly lists a 0–100 mm range in 20 mm increments.

It may suit a shallow-water skiff or jon-boat owner seeking a 4-inch setback and included laminated wood. However, the fixed-style specification conflicts with the adjustment description, so that distinction matters to the buying decision.

Listed on Amazon as: MJ-1-DP Jack Plate 4-Inch Setback for Outboard Motors Up to 35 HP, Cast Aluminum with Wooden Mounting Block, Manual Transom Jack Plate

#5 · Best Height Range

5. FQRANBO MJ-1-DP

• Material: Aluminum, Stainless Steel
• Weight: 10 lb
• Load Capacity: 1.5E+2 lb lb

Best for: Step-adjustable small outboards.

Why it ranks #5: Fits outboards up to 35 HP and specifies height adjustment from 0 to 100 mm in 20 mm increments for tuning motor position.

A 0–100 mm height range in 20 mm increments gives the FQRANBO plate a clear tuning method for outboards up to 35 HP. The listing also includes a wooden mounting block and names small fishing boats, aluminum boats, speedboats, and inflatables as intended applications.

The stated height steps let an owner reposition the motor within a defined range when tuning performance or ride, while the 4-inch setback separates the engine from the transom. Its aluminum and stainless-steel material listing accompanies the small-outboard application, and the included wooden block is relevant to mounting. Compatibility is described for engines up to 35 HP, including Yamaha, Mercury, and Honda, though the listing does not specify a more exact engine-by-engine fit.

Skip it if you need continuous rather than stepped height changes; the Winibo JP5400C specifies top-bolt adjustment through a 4-inch range.

This fits small-boat owners seeking a 4-inch setback, a supplied wooden block, and stepwise height tuning for an outboard up to 35 HP. The 20 mm increments define how finely you can position the motor.

Listed on Amazon as: MJ-1-DP Jack Plate 4'' Setback Small Engine Jack Plate for Outboard Motor Up to 35 HP, Manual Adjustable Distance Between Engine and Transom, Wooden Mounting Block Included (Black)

#6

6. RUIANOMG MJ-1-DP

• Material: Aluminum

Best for: Cast-aluminum clamp-on boats.

Why it ranks #6: Its cast-aluminum plate is intended for clamp-mount outboards up to 35 HP and allows long-shaft motors on short-shaft stern boats.

Cast-aluminum construction and a 4-inch setback give the RUIANOMG plate a straightforward fit for clamp-on outboards up to 35 HP. It is listed for dinghies, aluminum boats, and inflatables, and allows long-shaft motors to mount on short-shaft sterns.

The cast-aluminum plate is described as corrosion-resistant and able to withstand harsh ocean weather, an advantage for owners seeking metal construction suited to marine conditions. Its 4-inch setback is paired with the stated long-shaft-to-short-shaft mounting use, helping solve a specific transom mismatch. Compatibility is framed around clamp-mounted engines up to 35 HP and small boat types. The supplied component list names the jack plate only, so the details do not establish that a mounting block is included.

Skip it if you want a wooden mounting block included; the Camoo MJ-1-DP listing supplies a pre-cut, pre-grooved block with its plate.

This is suited to owners of clamp-on outboards up to 35 HP who need a 4-inch offset for a short-shaft stern and value cast aluminum. The supplied component details list the plate, not a mounting block.

Listed on Amazon as: MJ-1-DP Jack Plate 4inch Setback Replacement for Outboard Motors Up to 35HP

#7

7. maXpeedingrods 4-Inch Plate

• Material: Steel
• Weight: 5450 g

Best for: Coated-steel saltwater use.

Why it ranks #7: Specifies compatibility with outboard motors up to 35 HP and uses powder-coated steel; the listing also states a one-year manufacturer warranty.

A powder-coated steel body with stated corrosion and salt-spray resistance is the central appeal of this maXpeedingrods 4-inch-setback plate. It is listed for outboards up to 35 HP, with broad compatibility that includes named engine brands such as Yamaha and Mercury.

The steel construction is described as high-strength and wear-resistant, while the powder coating forms a barrier intended to resist corrosion and salt spray. That pairing is relevant for owners who want a plate whose finish is specified for marine exposure and minimal maintenance. The 4-inch setback gives the engine a defined offset from the transom, and the stated 35 HP limit helps frame its use for small outboard setups; no height-adjustment range is provided in the supplied details.

Skip it if you need a listed height-adjustment range before choosing; the VELCKING plate specifies adjustment from 0–100 mm in 20 mm steps.

A reasonable candidate for owners of outboards up to 35 HP who prioritize coated-steel construction and stated salt-spray resistance. The listing gives a 4-inch setback but no height-adjustment range, a key boundary for tuning needs.

Listed on Amazon as: maXpeedingrods 4" Setback Jack Plate for Outboard Motors Up to 35 HP

#8

8. VELCKING MJ-1-DP

• Material: Nylon
• Weight: 8.12 kg
• Load Capacity: 8 lb

Best for: Incremental height tuning.

Why it ranks #8: Lists 0–100 mm height adjustment in 20 mm increments and mounting blocks, but its specifications give an unusual 8-pound load capacity.

Height adjustment from zero to 100 mm in 20 mm increments gives this VELCKING plate a defined range for tuning engine position and ride. Its 4-inch setback and stated compatibility with boats make it a candidate for buyers who want manual, stepwise height changes rather than a fixed mounting position.

The 20 mm adjustment steps let you change engine height within a stated 0–100 mm range, giving a repeatable way to try different positions. Rubber-pad mounting blocks and stainless-steel screws are specified for attachment to the engine and crossmember, with the pads intended to protect those mounting surfaces. The listing also describes a heavy-duty hard-steel-alloy construction for vibration and wave-impact resistance, making the mounting hardware and adjustment range the key practical considerations.

Skip it if you need continuous height positioning; the Winibo JP5400C instead specifies adjustment by rotating top bolts across a 4-inch range.

This suits a boat owner who wants a defined, incremental way to tune engine height and appreciates included rubber-pad blocks and stainless screws. Its 20 mm steps are a boundary for buyers seeking finer positioning.

Listed on Amazon as: MJ-1-DP Jack Plate 4'' Setback Small Engine Jack Plate Adjustable Outboard Engine Jack Plate for Boats, Up to 35HP, Manual Height Adjustment, Includes Mounting Hardware (Black)

#9

9. Winibo JP5400C

• Material: Aluminum
• Load Capacity: 220 lb

Best for: Four-inch bolt-adjustable lift.

Why it ranks #9: Lists a 220-pound load capacity and 4 inches of adjustment, but provides no small-outboard horsepower limit in the supplied specifications.

Top adjustment bolts provide a specified 4-inch range of motor-height control on the Winibo JP5400C. Its 6061 aerospace aluminum receives T6 heat treatment, and the plate is intended to mount a long-shaft engine on a short-shaft transom while helping a boat operate in shallower water.

Rotating the top bolts changes motor height across the full 4-inch adjustment range, giving the owner a direct way to reposition the engine for a short-shaft transom setup. The 6061 aluminum and T6 heat treatment are listed alongside corrosion resistance for harsh marine environments, supporting the plate's material choice. A 220-pound load capacity is specified, though the supplied details do not state a horsepower limit, so buyers should use the stated load figure when assessing their setup.

Skip it if you need a stated horsepower ceiling for a clamp-on outboard; the T-H Marine Mini Jacker lists compatibility up to 35 HP.

A candidate for owners matching a long-shaft engine to a short transom who want bolt-operated height adjustment and a stated 220-pound capacity. The listing gives no horsepower ceiling, so that remains a fit consideration.

Listed on Amazon as: 4" Adjustable Outboard Motor Jack Plate (JP5400C)

#10

10. GELUOXI Adjustable Plate

• Material: Alloy Steel, Aluminum

Best for: Higher-horsepower transom mounting.

Why it ranks #10: Its listed maximum is 225 HP, far beyond the small-outboard focus, and the supplied product details do not specify a 35 HP application.

A stated 225 HP maximum sets this GELUOXI manual jack plate apart from the small-engine options in this roundup. Its 4-inch setback and transom-mount format are intended for positioning an outboard, including fitting a long-shaft engine to a short-shaft transom, with a one-piece aluminum-alloy body and steel fasteners.

The manual operation means height and setback positioning are handled at the plate rather than by a powered lift; the listing identifies mounting and adjusting outboards on boat transoms as its use. Its 4-inch setback gives a defined offset, while the one-piece aluminum-alloy construction and steel fasteners form the stated hardware package. The specified 225 HP ceiling makes it relevant beyond small outboards, but buyers should assess whether that capacity and manual adjustment suit their particular setup.

Skip it if you want a plate specifically capped at 35 HP for a small clamp-on outboard; the T-H Marine Mini Jacker is listed for that application.

Consider it if your transom-mounted outboard calls for a manual plate with a 4-inch setback and the listed 225 HP capacity. Its higher rating may be unnecessary for small-engine buyers, and adjustment remains manual.

Listed on Amazon as: Adjustable 4'' Set Back Jack Plate Manual Power Lift Transom Outboard Boat Motor Replacement for Outboard Boat Motors GELUOXI