Best Motorcycle Loader For Pickup Trucks: 10 Ramps Compared

#1 · Best Overall

1. Yilezena Folding Ramps

• Dimensions: 86.6"L x 11"W x 5.35"H
• Load Capacity: 1500 lbs
• Material: Aluminum

Best for: Portable two-piece motorcycle ramps.

Why it ranks #1: This two-piece aluminum set is explicitly listed for motorcycles and pickup trucks, with an 86.6-inch length and 1,500-lb stated capacity.

Two folding aluminum ramps provide a 1,500-pound stated capacity for motorcycles, ATVs, dirt bikes, and lawn mowers, while hook ends and an anti-slip surface address ramp contact and traction. Their 86.6-inch length gives pickup owners a defined loading span in a portable format.

The two-piece set measures 86.6 inches long and 11 inches wide, giving buyers concrete dimensions for planning pickup loading. Folding construction supports easier carrying and storage, while aluminum keeps the stated set weight to 37.5 pounds. Hook ends provide the listed tailgate-protective connection point, and the anti-slip surface is intended to support traction. Its 1,500-pound capacity covers the listed equipment categories, but the total load must remain within that stated limit.

Skip it if you need a wider individual ramp than 11 inches; these ramps are listed at 11 inches wide each.

Choose this set for pickup owners moving motorcycles or other listed wheeled equipment who want folding storage and two ramps. Check the 11-inch width and 1,500-pound capacity against your vehicle and loading approach.

Listed on Amazon as: 86.6" x 11" Folding Loading Ramps 2PCS, 1500 LBS Aluminum Portable Truck Ramp with Tailgate-Protective Hook Ends & Anti-Slip Surface, Heavy Duty Motorcycle Ramps for Pickup Trucks, ATV & Lawn Mower

#2 · Wide Ramp

2. Caliber Ramp Pro 2.0

• Dimensions: 11.5"L x 3"W x 90"H
• Load Capacity: 1500 lb
• Material: Aluminum

Best for: Multi-vehicle ramp haulers.

Why it ranks #2: Its 52-inch width and 1,500-lb capacity suit broader powersports loading, while the trifold design stores at 26 inches wide and a strap anchors it.

A 1,500-pound capacity paired with a 52-inch-wide loading surface lets the Caliber Ramp Pro 2.0 serve ATVs, UTVs, snowmobiles, and golf carts. Its trifold construction narrows to 26 inches for truck-bed storage, while the included Retrax strap and glides address anchoring and traction during loading.

This 90-inch-long aluminum ramp covers several vehicle types, making it useful for households or haulers that move more than motorcycles. The 1,500-pound capacity gives a defined load limit, while its 52-inch width provides a broad ramp surface. For transport, the trifold design reduces the width to 26 inches, a more manageable format for truck-bed storage. Caliber includes a Retrax strap for stable anchoring and glides for loading traction, supporting a more controlled setup across the listed loading conditions.

Skip it if you need a lighter ramp for frequent solo carrying; the 57-pound Caliber may be cumbersome to move.

This is a fit for owners loading different powersports vehicles who can use its broad trifold ramp and included anchoring strap. Consider the 57-pound weight and 26-inch folded width when planning handling and truck-bed storage.

Listed on Amazon as: Caliber Ramp Pro 2.0 13527, Universal ATV & Snow Ramp, 1,500-lbs. Capacity

#3 · Bed Extender Combo

3. Extreme Max RampXtender

• Dimensions: 90"L x 90"W x 3.5"H
• Load Capacity: 1500 lb
• Material: Aluminum

Best for: ATV loading and bed extension.

Why it ranks #3: This ATV ramp also adds two feet of truck-bed length; the listing gives a 1,500-lb capacity and says its universal design fits consumer pickups.

A single aluminum system serves as both an ATV ramp and a tailgate extender, adding two feet of truck-bed length when configured for cargo. Its 7.5-foot trifold ramp has an arched 12-degree profile, while the listed 1,500-pound capacity gives ATV owners a stated loading limit.

The RampXtender’s two configurations address different transport needs: use the 7.5-foot ramp to load an ATV, then position it as a tailgate extender to add two feet to the bed. The arched 12-degree design supports a smoother loading path, and the aluminum construction keeps the system at a listed 47.6 pounds. It is described for light- and medium-duty trucks, including long-bed pickups and sport trucks. The 1,500-pound capacity and vehicle class should guide whether it suits a particular load.

Skip it if you use a heavy-duty truck outside the stated light- and medium-duty fit; this combo is specified for lighter truck classes.

Pick this if you want one system for ATV loading and extra bed length on a light- or medium-duty pickup. The 1,500-pound capacity and truck class are important boundaries for matching it to your vehicle and cargo.

Listed on Amazon as: Extreme Max 5500.4070 RampXtender ATV Ramp and Tailgate Extender Combo

#4 · Eight-Foot Ramp

4. EZ-ACCESS Traverse SF08

• Dimensions: 96.19"L x 30.25"W x 2.58"H
• Load Capacity: 1000 lb
• Material: Aluminum

Best for: Single-ramp ATV haulers.

Why it ranks #4: The 8-foot aluminum singlefold ramp is portable and stores in a truck, while its specification lists a 1,000-lb capacity; confirm that suits your motorcycle.

An 8-foot aluminum singlefold ramp that folds to 15.28 inches wide gives ATV owners a long loading surface that can stow in a pickup, trailer, van, or shed. Built-in handles support carrying between trips, while its listed 1,000-pound capacity sets a clear load boundary for choosing equipment.

The 96.19-by-30.25-inch ramp provides a broad surface for moving equipment into a truck, while the singlefold design reduces its folded width to 15.28 inches for storage. Built-in handles make carrying more manageable, and aluminum construction keeps the listed weight to 51 pounds. Its specified load capacity is 1,000 pounds, so compare that figure with the loaded vehicle or equipment before choosing it. The long, portable format suits owners who need a ramp they can also store between uses.

Skip it if you need a paired ramp set or a capacity above its listed 1,000 pounds; this is one singlefold ramp.

This suits ATV and equipment owners who want a long, singlefold aluminum ramp for pickup or trailer loading and have storage space for its 8-foot length. Keep its 1,000-pound listed capacity in mind when selecting a load.

Listed on Amazon as: EZ-Access Traverse Aluminum Singlefold Folding Ramp, Silver, 8 ft, ATVs

#5

5. Generic Ramp Extender Combo

• Material: Aluminum

Best for: Paired ramp and extender buyers.

Why it ranks #5: The aluminum ramp-and-tailgate-extender combo is explicitly described for motorcycle and ATV loading, with a 7.3-foot length and 1,400-lb pair capacity.

A two-in-one ramp and tailgate-extender configuration combines loading and added bed reach, giving pickup owners two transport functions in one aluminum product. The supplied specifications list 7.3-foot ramps, 14-inch width per piece, and 1,400 pounds of capacity per pair, defining its size and load limit.

Each ramp is listed as 7.3 feet long and 14 inches wide, dimensions that describe the loading surface for motorcycles, ATVs, and lawn mowers named in the title. The product is also identified as a tailgate-extender combo for light- to medium-duty pickups, so it addresses cargo support as well as loading. Capacity is specified as 1,400 pounds per pair, or 700 pounds per piece. Its packaged dimensions are 47 by 15 by 5.5 inches, useful when considering storage space.

Skip it if you need a single ramp rated above 700 pounds; this product’s listed per-piece limit is 700 pounds.

This suits light- or medium-duty pickup owners who want ramp and extender functions for motorcycles, ATVs, or lawn mowers. Check the per-piece limit against your loading plan, and allow for the listed packaged dimensions when storing it.

Listed on Amazon as: Heavy-Duty Aluminum Ramp & Tailgate Extender Combo 2 in 1 – 1 400 LBS/Pair Load Capacity 7.3 FT Long Ramp for Motorcycle ATV Lawn Mower Loading Fits Light to Medium Duty Pickup Trucks

#6

6. GXYWADY Folding Ramp

• Dimensions: 33"L x 16"W x 112"H
• Load Capacity: 550 LBS
• Material: Aluminum

Best for: Rubber-padded dirt-bike ramps.

Why it ranks #6: This 88.6-inch aluminum ramp is listed for pickup trucks and dirt bikes, with a handle, anti-slip rubber pads, and a 550-lb capacity.

Rear anti-slip rubber pads give this 7.5-foot aluminum ramp a stated contact feature for pickup loading, while its handle and lightweight construction support carrying. The single-ramp listing specifies a 550-pound capacity, making that figure the main guide for matching it to a motorcycle or dirt-bike load.

At 88.6 inches long and 11 inches wide, the ramp provides a defined loading surface for pickup-truck use. Its aluminum construction is described as lightweight and sturdy, and the handle supports transport between storage and the truck. Rubber pads at the rear are intended to prevent slipping during use, adding a specific contact feature at the ramp’s back end. The listed capacity is 550 pounds, so this is best evaluated for loads within that limit rather than heavier equipment.

Skip it if you need to load equipment above 550 pounds; Caliber Ramp Pro 2.0 13527 lists a 1,500-pound capacity.

This fits pickup owners handling lighter dirt bikes who value a single aluminum ramp with a handle and rear rubber pads. Its 550-pound limit is decisive, so match the complete loading weight to the stated capacity.

Listed on Amazon as: GXYWADY 7.5FT 550LBS Aluminum Folding Motorcycle Ramp

#7

7. GENRICS Folding Ramp

• Dimensions: 88.6"L x 11"W x 11"H
• Load Capacity: 550 lb
• Material: Aluminum

Best for: Traction-focused single-ramp users.

Why it ranks #7: The 88.6-inch aluminum ramp has a perforated traction surface and folds for storage, but its listed 550-lb capacity limits suitable loads.

A perforated aluminum loading surface is intended to provide traction in wet or muddy conditions, giving this 7.5-foot single ramp a practical feature for changing surfaces. Its bi-fold design needs no assembly and stores in garages or basements, while the stated 550-pound capacity defines its load range.

The 88.6-by-11-inch ramp is listed for pickups, dirt bikes, SUVs, and trailers, and its aluminum construction is described as lightweight and sturdy for carrying. The perforated board is specifically intended to provide traction in wet or muddy conditions. When not in use, the bi-fold design supports storage in a garage or basement, and no assembly is required before use. Its 550-pound capacity is the important limit when deciding whether it can handle a particular motorcycle or other load.

Skip it if you need to carry more than 550 pounds; Caliber Ramp Pro 2.0 13527 lists a 1,500-pound capacity.

This is suited to owners loading a lighter motorcycle or dirt bike who value a perforated surface and compact bi-fold storage. Its single-ramp, 550-pound limit is a boundary to check before use.

Listed on Amazon as: 1Pcs 550 LBS Capacity 7.5FT Aluminum Folding Loading Ramps Motorcycle Ramp Replacement for Pickup Trucks, Dirt Bike Ramp with Handle, SUV, Trailer

#8

8. atvwrlod Folding Ramp

• Dimensions: 33"L x 16"W x 112"H
• Load Capacity: 550 LBS

Best for: No-assembly dirt-bike loading.

Why it ranks #8: This pickup-oriented aluminum ramp has a handle, double-fold design, and elongated tailboard, but its stated capacity is 550 lb.

A double-folding design and included handle make this 550-pound aluminum ramp easier to carry and store between pickup-truck loading jobs. Its elongated tailboard is intended to reduce wear where the ramp meets the transport vehicle, while the no-assembly setup keeps preparation straightforward for dirt-bike owners.

The listing identifies this as a pickup-truck replacement ramp for dirt bikes, with a 550-pound capacity and an aluminum build. Its double-folding structure is intended to make carrying easier, and the handle supports that portable workflow. No assembly is required, so it can be installed for use without putting ramp components together. An elongated tailboard reduces wear between the ramp and transport vehicle, a useful detail for repeated loading. Check the ramp’s compatible size against your truck and intended load before use.

Skip it if you need more than 550 pounds of capacity; Caliber Ramp Pro 2.0 13527 lists a 1,500-pound capacity.

Choose this for dirt-bike loading into a pickup when a no-assembly ramp and folding portability matter. Its 550-pound capacity is the key boundary, and the listed fitment is for pickup trucks, so consider both before loading.

Listed on Amazon as: 550LBS Powersports Loading Ramp Replacement for Pickup Trucks

#9

9. YJEUZCD Loading Ramps

Best for: Strapped scooter and bike loading.

Why it ranks #9: The listing names motorcycles, ATVs, UTVs, and scooters, and describes safety straps and an extension plate, but gives a comparatively low 440-lb capacity.

Adjustable safety straps and an extension plate are listed to hold this aluminum ramp firmly in place, addressing movement at the truck connection during loading. Its title specifies a 6.2-foot length and 440-pound capacity, making it a shorter-span option for bikes, scooters, and other listed vehicles.

The ramp’s rung design increases friction, while the extension plate and adjustable safety straps are described as measures to prevent tipping or sliding. Those features support a more secure setup when loading a motorcycle, scooter, ATV, or UTV named in the listing. Aluminum alloy is specified, and the description says the ramps can be stored in a garage or truck bed. The title gives a 6.2-foot length and 440-pound capacity, so check both the reach and load limit against the intended vehicle.

Skip it if you need capacity above 440 pounds; Caliber Ramp Pro 2.0 13527 lists a 1,500-pound capacity.

This suits owners loading lighter bikes or scooters who want straps and an extension plate in a compact truck ramp. Its 6.2-foot length and 440-pound capacity are key boundaries for checking reach and load suitability.

Listed on Amazon as: Aluminum Loading Ramps For Pickup Trucks, 6.2ft Motorcycle Ramp 440LBS Capacity, Truck Bikes ATV UTV Scooters Ramps(Silver-185cm,4pcs)

#10

10. Broozer 8-Foot Ramps

• Dimensions: 96"L x 15"W x 7"H
• Load Capacity: 10 lb
• Material: Aluminum

Best for: Trailer and heavy-equipment loading.

Why it ranks #10: These aluminum ramps are primarily described for trailers and heavy equipment, not motorcycle pickup loading; the listed specifications give a 10-lb capacity.

A pair of 8-foot aluminum ramps with hook ends can connect to trailer lips, giving equipment haulers a defined way to bridge a trailer deck. The product description rates the set at 10,000 pounds per axle and names tractors, skid steers, cars, and trucks among its intended loads.

Each ramp measures 96 inches long and 15 inches wide, and the set uses hook attachment ends to connect to car-hauler trailer decks. Knife feet meet the ground, establishing the listed contact arrangement at the other end. Aluminum construction is described as lighter than traditional steel, although the pair weighs 108 pounds, so moving and positioning the set is a substantial task. The additional description states a 10,000-pound-per-axle rating; assess the axle load and trailer-lip setup against that rating.

Skip it if you need a folding ramp for compact storage; these are two 8-foot ramps weighing 108 pounds together.

This suits trailer owners loading equipment with compatible deck lips, including the listed tractors, skid steers, cars, and trucks. Plan for the pair’s 108-pound weight and verify that axle loading stays within the stated rating.

Listed on Amazon as: Set of 2. 8' Aluminum Ramps for Heavy Equipment Skid Steer Tractor Car ATV Truck Trailer Ramps 2 RAMPs = 10,000lb Capacity 96" (8') Long (96) Br Premium Material