A strong camper lift kit matches your axle type and mounting pattern while providing the clearance you need; the right choice depends on whether your trailer uses leaf springs or a torsion axle. These six options span 3-inch to 3.5-inch lifts, with one over-under kit listed for 5,200–7,000-pound round-tube axles and several riser or spacer kits for torsion axles. Fit matters more than lift height alone: hole spacing, axle rating, and bracket style can rule out a kit even when its advertised lift looks suitable.
The products below include camper-specific and axle-specific choices, plus one listing whose details describe a hanger kit rather than a lift. Confirm your axle identification and mounting measurements before ordering.
The TXINGMENG LC270682 Riser Kit is the best overall choice for a compatible 4,400-pound diamond torsion axle. It provides a 3.5-inch lift, specifies 9-inch center-to-center mounting-hole spacing, and includes two risers and mounting fasteners. Those details make it easier to check fit than a listing with only a general camper description.
It is not universal: choose it only if your axle type, capacity, and hole spacing match.
Our Top Picks
Best OverallIts 3.5-inch lift is specified for 4,400-pound diamond torsion axles with 9-inch hole spacing, and the kit includes risers and fasteners.
View on Amazon
Best RPOD FitThe listing identifies RPOD campers with Lippert 4,400-pound torsion axles and specifies a 3.5-inch lift with 9-inch hole spacing.
View on Amazon
Best Leaf-Spring OptionDexter K71-385-00 Over/Under Kit
For 5,200–7,000-pound axles with 3-inch tubes and 2-inch-wide leaf springs, it lists a 3–4-inch lift and installation hardware.
View on Amazon- Best #10 Torflex Fit RecPro Single Axle Torflex Kit
Compare lift kits by axle type and fit
| # | Product | Weight | Buy |
|---|---|---|---|
| 1 | 1. TXINGMENG LC270682 Riser KitBest Overall | — | View on Amazon |
| 2 | 2. Generic RPOD Riser KitBest RPOD Fit | — | View on Amazon |
| 3 | 3. Dexter K71-385-00 Over/Under KitBest Leaf-Spring Option | 9 lb | View on Amazon |
| 4 |  4. RecPro Single Axle Torflex KitBest #10 Torflex Fit | — | View on Amazon |
| 5 |  5. Cindervane Torflex Lift KitSingle-axle torsion clearance | 11 lb | View on Amazon |
| 6 |  6. Dexter Torflex Lift KitDouble-eye spring hanger kit | 16 oz | View on Amazon |
Detailed Reviews: Best Lift Kit For Camper
#1 · Best Overall
1. TXINGMENG LC270682 Riser Kit
Best for: 4400-pound diamond torsion.
Why it ranks #1: Its 3.5-inch lift is specified for 4,400-pound diamond torsion axles with 9-inch hole spacing, and the kit includes risers and fasteners.
The TXINGMENG LC270682 raises a compatible 4,400-pound diamond torsion axle by 3-1/2 inches, adding ground clearance and room for larger tires. Its 9-inch center-to-center mounting-hole spacing gives buyers a concrete frame-alignment dimension to check before selecting this camper lift kit.
This kit is specified for the 4,400-pound diamond torsion axle and matching LC270682, 164888, or 164882 references, making axle type and mounting layout key fit checks. The 3-1/2-inch risers provide the stated vertical lift, while the 9-inch hole spacing helps align the risers with corresponding frame mounting points. Included zinc-plated fasteners—washers, nuts, and Grade 5 cap screws—support the listed direct bolt-on installation with supplied hardware.
- Provides 3-1/2 inches of lift
- Fits 4,400-pound diamond torsion axles
- Uses 9-inch center-to-center mounting-hole spacing
- Includes zinc-plated washers, nuts, and Grade 5 cap screws
- Specified for 4,400-pound diamond torsion axles with 9-inch hole spacing.
Skip it if you have a #10 Torflex axle rated 2,300–4,000 pounds; RecPro RP-1156-A is listed for that axle class.
Pick this riser kit for a camper with a compatible 4,400-pound diamond torsion axle when 3-1/2 inches of lift and larger-tire clearance are priorities. The 9-inch hole spacing is a fit boundary.
Full product details
| Brand | TXINGMENG |
|---|---|
| Included Components | Axle Risers, Flat Washers, Hex Nuts, Hex Cap Screws |
| Manufacturer | TXINGMENG |
| Part Number | LC270682 |
| Manufacturer Warranty Description | 30 day return policy |
| Model Number | LC270682 |
Listed on Amazon as: LC270682 Axle Riser Kit 4400# Torsion Axle 3.5" Lift 9" Hole Spacing
View on Amazon#2 · Best RPOD Fit
2. Generic RPOD Riser Kit
Best for: RPOD Lippert axle risers.
Why it ranks #2: The listing identifies RPOD campers with Lippert 4,400-pound torsion axles and specifies a 3.5-inch lift with 9-inch hole spacing.
This RPOD camper lift kit provides a 3-1/2-inch lift for Lippert 4,400-pound torsion axle applications, giving a compatible trailer added clearance. Its mounting holes are spaced 9 inches center to center, making the listed axle type and hole spacing the key details for choosing it.
The kit is identified for RPOD campers using a Lippert 4,400-pound torsion axle, so buyers can narrow fit by camper and axle application rather than relying on a general lift-kit label. Its 3-1/2-inch rise provides the stated clearance increase, while 9-inch center-to-center mounting holes specify the mounting layout. The description lists two #164882 axle risers; it does not provide a separate hardware inventory, so the risers and stated fit details are the supported basis for selection.
- Specified for RPOD camper applications
- Fits Lippert 4,400-pound torsion axles
- Provides a 3-1/2-inch lift
- Mounting holes are spaced 9 inches center to center
- The description lists two axle risers but does not specify included mounting hardware.
Skip it if you need a stated fastener set with your risers; TXINGMENG LC270682 lists washers, nuts, and cap screws.
Consider this option for an RPOD camper with the specified Lippert 4,400-pound torsion axle and 9-inch mounting-hole spacing. Its 3-1/2-inch lift is stated, but the description does not detail a hardware set.
Full product details
| Brand | Generic |
|---|---|
| Manufacturer | MKL LLC |
| Part Number | MNX0045 |
| Model Number | 164888 |
Listed on Amazon as: Replacement for Lift Kit for RPOD Camp 4400# Axle 3-1/2' Riser LCI Lippert Torsion Trailer
View on Amazon#3 · Best Leaf-Spring Option
3. Dexter K71-385-00 Over/Under Kit
- Weight: 9 lb
Best for: Round-tube axle conversion.
Why it ranks #3: For 5,200–7,000-pound axles with 3-inch tubes and 2-inch-wide leaf springs, it lists a 3–4-inch lift and installation hardware.
The Dexter K71-385-00 uses an over/under conversion to lift a trailer 3–4 inches, giving a camper more clearance beneath its frame. Its application is specific: it fits 5,200–7,000-pound axles with 3-inch round tubes and 2-inch-wide leaf springs, making axle and spring dimensions central to the choice.
This kit serves one axle and supplies four U-bolts, two tie plates, two seats, four spacers, and eight nuts, so the listed mounting pieces come together in one package. The over/under arrangement provides the stated 3–4-inch lift for a compatible round-tube, leaf-spring setup. That makes it a focused option for a camper owner seeking more ground clearance without changing to a torsion-axle riser design; confirm that the axle rating, tube diameter, and spring width match the listed application.
- Lifts trailer 3–4 inches
- Fits 5,200–7,000-pound axles
- For 3-inch round-tube axles with 2-inch-wide leaf springs
- Includes hardware for one axle
- Fits round-tube leaf-spring axles, not the listed torsion-axle applications.
Skip it if you have a torsion axle rather than a 3-inch round tube; the Cindervane K71-707-01 is listed for compatible torsion systems.
Choose this Dexter kit if your camper has a 5,200–7,000-pound, 3-inch round-tube axle and 2-inch leaf springs and needs the stated 3–4-inch lift. Its fit is limited to that axle arrangement.
Full product details
| Brand | DEXTER AXLE |
|---|---|
| Included Components | Includes 4 u-bolts, 2 tie plates, 2 seats, 4 spacers, 8 nuts |
| Item Weight | 9 pounds |
| Manufacturer | Dexter Axle |
| Part Number | K71-385-00 |
| Material | Steel |
| Model Number | K71-385-00 |
| Additional Information | Important Information Proposition 65 Warning for California Consumers WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov |
Listed on Amazon as: Dexter K71-385-00 Over/Under Lift Kit for 5.2K-7K 3" Round Tube Axles
View on Amazon#4 · Best #10 Torflex Fit
4. RecPro Single Axle Torflex Kit
Best for: #10 Torflex frame spacers.
Why it ranks #4: It fits #10 Torflex axles rated 2,300–4,000 pounds, raises the frame 3 inches, and specifies 8-inch frame-spacer hole spacing.
RecPro’s single-axle Torflex kit raises the frame by three inches, targeting trailer owners who need more axle clearance. It fits #10 Torflex axles rated from 2,300 to 4,000 pounds, and its frame spacers use an 8-inch center-to-center bolt-hole spacing that buyers can check against their trailer.
The #10 Torflex application and 2,300–4,000-pound capacity range make this a specific option for compatible single-axle RV trailers. Two frame spacers provide the stated three-inch lift, while the 8-inch spacing between their bolt holes gives a concrete mounting dimension for checking the frame layout. The package also lists eight washers, eight locking hex nuts, and eight hex screws, supplying the stated hardware for installation rather than requiring buyers to source those listed pieces separately.
- Raises the frame 3 inches
- Fits #10 Torflex axles rated 2,300–4,000 pounds
- Includes two frame spacers
- Includes eight washers, locking hex nuts, and hex screws
- Limited to #10 Torflex axles with 8-inch frame-spacer hole spacing.
Skip it if you need 9-inch mounting-hole spacing on a 4,400-pound diamond torsion axle; TXINGMENG LC270682 is specified for that layout.
RecPro suits an RV owner with a #10 Torflex axle in the stated capacity range who wants a three-inch frame lift and the listed hardware included. The 8-inch hole spacing is a key fit limit.
Full product details
| Brand | RecPro |
|---|---|
| Included Components | Single Axle Torflex Lift Kit |
| Manufacturer | RecPro |
| Part Number | RP-1156-A |
| Manufacturer Warranty Description | 1 Year Manufacturer |
| Model Number | RP-1156-A |
Listed on Amazon as: RecPro Single Axle Torflex Lift Kit | 3" RV Axle Lift | Made in USA
View on Amazon#5
5. Cindervane Torflex Lift Kit
- Weight: 11 lb
Best for: Single-axle torsion clearance.
Why it ranks #5: This 3-inch kit is listed for single-axle torsion trailers rated 2,300–4,000 pounds and includes spacers and mounting hardware.
Cindervane’s 3-inch lift spacers add approximately three inches of ground clearance to compatible single-axle RV trailers, helping with clearance on uneven roads. The kit is specified for 2,300–4,000-pound torsion axles and side-mounted axle brackets, so those details define whether it suits a camper.
The stated lift height and torsion-axle range make this a targeted choice for a single-axle camper needing additional clearance rather than a general-purpose suspension kit. Its side-mounted bracket application narrows the fit further. Lift spacers arrive with bolts, washers, and locking nuts, which provides the listed mounting hardware in the kit. Check that the trailer uses a torsion system within the 2,300–4,000-pound range and the specified bracket arrangement before choosing it.
- Provides approximately 3 inches of lift
- For single-axle trailers
- Fits torsion axles rated 2,300–4,000 pounds
- Includes spacers, bolts, washers, and locking nuts
- Limited to single-axle torsion systems with side-mounted axle brackets.
Skip it if you have a leaf-spring axle; the Dexter K71-385-00 is listed for compatible 3-inch round-tube leaf-spring axles.
This is a match for an RV owner seeking about three inches of clearance on a single-axle torsion trailer. Its 2,300–4,000-pound rating range and side-mounted bracket application are important fit boundaries.
Full product details
| Brand | Cindervane |
|---|---|
| Included Components | Replacement Parts – Underhood;Powertrain/Drivetrain/Axles;TRAILER AXLE ACCESSORIES. |
| Item Weight | 11 pounds |
| Manufacturer | Cindervane |
| Part Number | K7170701 |
| Manufacturer Warranty Description | Manufacturer Warranty |
| Model Number | K7170701 |
Listed on Amazon as: Torflex Lift Kit for RV Trailers, K71-707-01,Fits #9#10#11#12 Axles
View on Amazon#6
6. Dexter Torflex Lift Kit
- Weight: 16 oz
Best for: Double-eye spring hanger kit.
Why it ranks #6: Despite its title, the listed details describe a hanger kit for double-eye springs, not a torsion-axle lift kit, making its use unclear.
Dexter’s K71-707-01 is described as a single-axle hanger kit for double-eye springs, providing the parts to attach trailer springs to the frame. Despite the Torflex Lift Kit title, the supplied details specify a spring-hanger application and do not state a lift height.
For a camper with double-eye springs, the listed hanger kit’s purpose is attaching the trailer springs to the frame, and a bushing is included. Its alloy-steel material is specified, but the supplied information does not identify a clearance increase, riser dimensions, or a Torflex axle fit range. Buyers should therefore treat it as a spring-to-frame attachment kit, not assume that the title alone establishes a particular lift or torsion-axle compatibility.
- Specified for a single axle
- For double-eye springs
- Provides parts to attach trailer springs to the frame
- Includes a bushing
- No lift height or Torflex axle fit range is specified in the supplied details.
Skip it if you need a stated three-inch lift for a #10 Torflex axle; RecPro RP-1156-A lists that lift and axle application.
Choose this Dexter kit when the need is attaching double-eye springs to a trailer frame and the included bushing is relevant. It is not a clear choice for a specified lift height or Torflex fit.
Full product details
| Brand | DEXTER AXLE |
|---|---|
| Included Components | Replacement Parts – Underhood;Powertrain/Drivetrain/Axles;TRAILER AXLE ACCESSORIES. |
| Item Weight | 16 ounces |
| Manufacturer | DEXTER AXLE |
| Part Number | K71-707-01 |
| Manufacturer Warranty Description | Manufacturer Warranty |
| Material | Alloy Steel |
| Model Number | K7170701 |
| Additional Information | Important Information Proposition 65 Warning for California Consumers WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov |
Listed on Amazon as: DEXTER AXLE Torflex Lift Kit
View on AmazonAvoid the axle-fitment trap
The main fitment trap is treating all trailer lift kits as interchangeable; the listed products target different suspension designs and mounting arrangements. The Dexter K71-385-00 Over/Under Kit is for 3-inch round-tube axles with 2-inch-wide leaf springs, while the TXINGMENG LC270682 Riser Kit is specified for a 4,400-pound diamond torsion axle with 9-inch hole spacing. The RecPro Single Axle Torflex Kit instead calls for a #10 Torflex axle and 8-inch spacing at its frame spacers.
Even a matching lift height does not establish compatibility. Check the axle label or manufacturer information, axle rating, suspension type, and center-to-center mounting-hole spacing against the kit details.
If any of those details are unknown or do not match, pause and verify fitment with the axle or trailer manufacturer before buying.
Check what the lift changes on your camper
A stated lift height describes the kit’s intended change, not whether every part of a camper will remain suitable afterward. The TXINGMENG LC270682 Riser Kit and Generic RPOD Riser Kit list 3.5 inches, while the RecPro Single Axle Torflex Kit and Cindervane Torflex Lift Kit list 3 inches; the Dexter K71-385-00 Over/Under Kit gives a 3–4-inch range. Added clearance may help with a specific axle or tire-clearance need, but it can also change the camper’s overall height and the relationship of steps or other fitted components to the ground.
The supplied listings do not specify those downstream effects or set a safe maximum lift for a particular camper. Measure the trailer and consider its intended use before choosing the taller option, and confirm any installation or towing implications with a qualified service professional.
How to Choose a Camper Lift Kit
Suspension and axle compatibility
Start by matching the kit to your suspension type, axle rating, and mounting layout. The Dexter K71-385-00 Over/Under Kit specifies 5,200–7,000-pound axles with 3-inch round tubes and 2-inch-wide leaf springs. The TXINGMENG LC270682 Riser Kit targets a 4,400-pound diamond torsion axle with 9-inch hole spacing, while the RecPro Single Axle Torflex Kit fits #10 Torflex axles rated 2,300–4,000 pounds and lists 8-inch spacing.
Buyers with leaf springs should focus on the Dexter option; owners of a matching 4,400-pound torsion axle should compare the two riser kits. Do not select by capacity alone: axle style and mounting dimensions also need to match.
Lift height
Choose a lift height that addresses your clearance need without assuming that a larger number is automatically better. The Cindervane Torflex Lift Kit and RecPro Single Axle Torflex Kit each specify 3 inches; the TXINGMENG LC270682 Riser Kit and Generic RPOD Riser Kit specify 3.5 inches. The Dexter K71-385-00 Over/Under Kit lists a 3–4-inch lift.
A buyer seeking a smaller stated change on a compatible torsion axle can look at the 3-inch kits, while someone needing the listed 3.5-inch lift for a matching 4,400-pound axle can consider either riser kit. Confirm actual fit and downstream clearance needs for your camper before deciding.
Mounting details and included hardware
Check the mounting measurements and hardware list before choosing a kit, because installation parts and hole spacing differ. The TXINGMENG LC270682 Riser Kit specifies 9-inch hole spacing and lists two risers, washers, nuts, and Grade 5 screws. The Generic RPOD Riser Kit also lists 9-inch spacing and two risers, but its details do not provide the same complete fastener breakdown.
The RecPro Single Axle Torflex Kit lists 8-inch frame-spacer spacing and includes screws, washers, and locking nuts; the Dexter K71-385-00 Over/Under Kit lists U-bolts, tie plates, seats, spacers, and nuts. Buyers with matching measurements can favor the kit whose listed hardware suits their installation; verify contents and fit before work begins.
Which Camper Lift Kit Should You Choose?
Choose the TXINGMENG LC270682 Riser Kit if your camper has a 4,400-pound diamond torsion axle with 9-inch mounting-hole spacing; it combines that specific fit with a 3.5-inch lift and listed fasteners. For an RPOD with a compatible Lippert 4,400-pound torsion axle, the Generic RPOD Riser Kit is the more directly targeted listing. If your trailer uses 5,200–7,000-pound round-tube axles with leaf springs, choose the Dexter K71-385-00 Over/Under Kit instead.
Owners of compatible #10 Torflex axles can compare the RecPro Single Axle Torflex Kit’s 8-inch spacing with the Cindervane Torflex Lift Kit’s stated 2,300–4,000-pound range. Avoid the Dexter Torflex Lift Kit unless its actual hanger-kit purpose matches your need.
Related Buying Guides
Frequently Asked Questions
How can I identify whether my camper has a torsion axle or leaf-spring axle?
Look beneath the camper near the wheels. Leaf-spring axles have visible curved or stacked metal springs connecting the axle to the frame. Torsion axles typically have a compact axle tube with no leaf springs; their suspension is built into the axle assembly.
If the design is unclear, check the axle label or ask an RV service professional.
How much lift can I add before changing tires, steps, or towing setup?
There is no single lift height that applies to every camper. Check the kit’s stated lift and evaluate the resulting clearance at the tires, steps, and towing connection, along with the trailer’s axle and suspension compatibility. The listed 3.5-inch lift is specific to the compatible TXINGMENG torsion-axle kit, not a universal recommendation.
Should a camper lift kit be installed by an RV service professional?
Use an RV service professional if you are unsure about axle identification, kit compatibility, or safe installation. A lift can affect wheel clearance and the trailer’s connection to the tow vehicle, so confirm fit and inspect the completed setup before travel. Follow the kit instructions and any applicable guidance for your camper and axle.
What should I verify before choosing a lift kit?
Match the kit to the axle type, capacity, and mounting details stated in its listing. For example, the TXINGMENG LC270682 is specified for a 4,400-pound diamond torsion axle with 9-inch center-to-center mounting-hole spacing. Do not assume a general camper description means the kit fits; confirm those details against your axle.
Which kit type suits a leaf-spring axle versus a torsion axle?
The Dexter K71-385-00 Over/Under Kit is listed for 5,200–7,000-pound, 3-inch round-tube axles with leaf springs. Torsion-axle kits are a different category and require their own axle compatibility checks. For a compatible RPOD with a Lippert 4,400-pound torsion axle, the RPOD-specific riser listing is more directly targeted.
Final Words
Choose by matching the kit to the axle, not by lift height alone. The TXINGMENG LC270682 is the best overall pick only for a compatible 4,400-pound diamond torsion axle with 9-inch mounting-hole spacing. RPOD owners with a compatible Lippert axle can consider its targeted riser kit; leaf-spring owners with 5,200–7,000-pound round-tube axles should consider the Dexter Over/Under Kit.
Verify fit before installation.
