Best Trailer Hitch For Snowmobile: 10 Options Compared

#1 · Best Overall

1. AIVWUMOT Adjustable Bumper Hitch

• Material: Alloy Steel
• Weight: 0.68 kg
• Compatible with Vehicle Type: Snowmobile, Trailer

Best for: Round and square bumper tubes.

Why it ranks #1: Alloy-steel construction, 0.94- to 1.42-inch adjustment, and stated compatibility with both round and square bumpers suit varied snowmobile setups.

Compatibility with both square and round bumper shapes sets the AIVWUMOT hitch apart for riders whose snowmobile tube shape narrows their mounting choices. Its width adjusts from 0.94 to 1.42 inches, while the 0.5-inch hook hole provides a defined connection size for towing gear.

The adjustable 0.94-to-1.42-inch width lets the hitch accommodate different pipe thicknesses within that range, and the stated round-or-square compatibility broadens the bumper shapes it can serve. Its 3.6-by-1.9-inch dimensions and 0.5-inch hook hole give buyers concrete measurements to compare with their setup. The listed compatible makes include Ski-Doo, Polaris, Yamaha, and Arctic Cat. Checking both tube dimensions and hook connection size helps establish whether it suits the intended towing arrangement.

Skip it if you need a receiver-mounted hitch; Yaocom's 32-inch tow bar connects to receiver-style mounting devices.

This fits riders who want an adjustable bumper hitch for round or square tubes across the listed snowmobile makes. Check the pipe range and 0.5-inch hook opening against your towing setup.

Listed on Amazon as: Adjustable Snowmobile Bumper Hitch Universal Heavy-Duty Steel Sled

#2 · Best Padded Hitch

2. MOTOQUEEN Universal Bumper Hitch

• Material: Stainless Steel
• Compatible with Vehicle Type: Snowmobile, Trailer

Best for: Noise-reducing universal bumper hitch.

Why it ranks #2: Its stainless-steel construction and anti-collision pad address noise and wear, while broad compatibility includes Ski-Doo, Polaris, Arctic Cat, and Yamaha.

An anti-collision pad beneath the tongue is the MOTOQUEEN hitch’s key practical distinction, intended to reduce noise and wear during use. Its adjustable bumper-hitch design is listed for most snowmobiles, including Ski-Doo, Polaris REV, Arctic Cat, and Yamaha, while stainless steel and a powder-coated finish are specified.

The pad under the tongue addresses contact noise and wear, which may matter during repeated towing over snow. Stainless-steel construction with a powder-coated finish is described as strong, weatherproof, and reusable, supporting use in winter conditions. The adjustable design offers a bumper-mount format, but the supplied information does not state its adjustment range or overall dimensions. Buyers should therefore compare the actual mounting geometry with their bumper rather than assuming every listed make uses the same fit.

Skip it if you need a listed width range before checking fit; MWEDP specifies a 0.94-to-1.42-inch adjustment range.

This suits riders prioritizing a padded, adjustable bumper hitch for the listed snowmobile makes. Its anti-collision pad and stainless, powder-coated construction are useful details, but the fit dimensions are not specified here.

Listed on Amazon as: Upgraded Universal Snowmobile Bumper Sled Trailer Hitch Tow Hitch

#3 · Best Adjustable Fit

3. MWEDP Universal Bumper Hitch

• Material: Alloy Steel
• Weight: 1.6 oz
• Compatible with Vehicle Type: Snowmobile, Trailer

Best for: Adjustable universal bumper fit.

Why it ranks #3: This alloy-steel bumper hitch fits several named snowmobile brands and adjusts from 0.94 to 1.42 inches for different pipe thicknesses.

A width adjustment from 0.94 to 1.42 inches lets the MWEDP bumper hitch accommodate different pipe thicknesses, giving riders across several snowmobile brands a more adaptable mounting option. Its stated compatibility includes Ski-Doo, Polaris, Yamaha, Arctic Cat, and other snowmobiles, while a 0.5-inch hook hole provides the towing connection.

The 3.6-by-1.9-inch hitch has an adjustable width, so buyers can set it for bumper pipes within the listed 0.94-to-1.42-inch range. That adjustment is useful when a fixed-width mount would not suit the pipe thickness. The product is described as bumper-mounted and includes the hardware needed for installation. Its listed brand compatibility is broad, but the actual mounting dimensions still define the fit; check those against the snowmobile bumper before choosing it.

Skip it if you need a receiver-mounted hitch; Yaocom's 32-inch tow bar connects to receiver-style mounting devices.

This suits riders seeking a compact, adjustable bumper mount for a snowmobile from one of its listed brands. Its 0.94-to-1.42-inch adjustment range and 0.5-inch hook hole are the key fit boundaries to check.

Listed on Amazon as: Universal Snowmobile Bumper Hitch for Ski Doo, Polaris, Arctic Cat, Yamaha

#4 · Stainless Steel Pick

4. AAAWZDWD Stainless Bumper Hitch

• Material: Stainless Steel
• Compatible with Vehicle Type: Snowmobile

Best for: Stainless adjustable bumper mount.

Why it ranks #4: The stainless-steel hitch fits several major snowmobile brands and adjusts between 0.94 and 1.42 inches; its listed hook hole is 0.5 inches.

Stainless-steel construction paired with a 0.94-to-1.42-inch width adjustment makes this hitch a practical option for riders matching a bumper’s thickness to a compact mount. Its listed snowmobile compatibility spans Ski-Doo, Polaris, Yamaha, Arctic Cat, and other snowmobiles, with a 0.5-inch hitch hole.

The adjustable width is specified in both inches and centimeters, helping buyers compare it with different bumper thicknesses before installation. Its 3.6-inch length and 1.9-inch height further define the space it occupies at the rear of the snowmobile. Stainless steel is the listed material, while the 0.5-inch hitch hole sets the connection opening. The package contents list one bumper hitch, so this is a single mount rather than a listed multi-piece kit.

Skip it if you need a receiver-mounted tow bar; Yaocom's 32-inch hitch connects to receiver-style mounting devices.

This suits a rider seeking a stainless, adjustable bumper mount for a listed snowmobile make. Check the 0.94-to-1.42-inch width range, overall dimensions, and 0.5-inch opening against the intended setup.

Listed on Amazon as: Universal Snowmobile Bumper Hitch for ATV UTV Adjustable Tow Hitch kit

#5 · Best Included Hardware

5. UTSAUTO 12-101 Bumper Hitch

• Material: Metal
• Weight: 0.5 kg
• Compatible with Vehicle Type: Snowmobile

Best for: Round or square bumper tubes.

Why it ranks #5: The kit includes screws, nuts, and an EVA pad, and its two-hole design accommodates different round or square bumper sizes when dimensions match.

Two selectable mounting holes and an extended hitch length give the UTSAUTO bumper hitch more options for positioning on different bumper sizes. It is specified for round or square snowmobile tube bumpers, and the included screws, nuts, and EVA pad make the mounting hardware part of the package.

UTSAUTO says it lengthened the hitch and added two holes after finding that the original size did not match some bumpers. Those alternative hole positions let a buyer select a mounting point for a suitable bumper, while the round-or-square tube compatibility covers two common shapes. Screws and nuts support the bolted installation, and the EVA pad is included. Because bumper sizes vary, compare the actual bumper dimensions with the hitch before selecting a hole position.

Skip it if you need a receiver-mounted tow bar; Yaocom's 32-inch hitch connects to receiver-style mounting devices.

This is a sensible option for a rider whose snowmobile has a round or square tube bumper and benefits from two mounting-hole choices. Bumper dimensions remain the deciding fit consideration.

Listed on Amazon as: Snowmobile Bumper Hitch Bumper Tow Hitch 12-101 for Polaris Arctic Yamaha Bumper Towing Hitch with Screws Nuts and EVA Pad

#6

6. ZHIXING Universal Bumper Hitch

• Material: Iron
• Weight: 14.4 oz
• Compatible with Vehicle Type: Snowmobile, Trailer

Best for: Adjustable sled-style connection.

Why it ranks #6: Its adjustable iron design is listed for Polaris, Yamaha, and Arctic Cat, with a stated adjustment range from 0.55 to 1.18 inches.

A freely adjustable width from 0.55 to 1.18 inches lets the ZHIXING hitch suit a range of snowmobile bumper sizes. Its sled-style trailer hitch format and stated compatibility with Polaris, Yamaha, Arctic Cat, and CB400 Tongue Type snowmobiles make it an option for riders looking beyond a single listed brand.

The width adjustment is the central fit feature: set it within the stated 0.55-to-1.18-inch range to match a compatible bumper. ZHIXING describes the hitch as a sled-style trailer hitch and says its robust bumper attachment provides a stable towing connection. That combination supports a direct bumper-mounted towing setup, though the product information advises reviewing the size chart and does not provide installation steps here. Verify the bumper dimensions against the listed adjustment range before purchase.

Skip it if you need a receiver-mounted tow bar; Yaocom's 32-inch hitch connects to receiver-style mounting devices.

Choose this for a rider seeking an adjustable bumper-mounted, sled-style connection across its listed snowmobile makes. Its 0.55-to-1.18-inch adjustment range is the essential boundary when checking bumper fit.

Listed on Amazon as: Universal Snowmobile Bumper Hitch Kit – for Polaris Ski-Doo Snowmobile

#7

7. JOYOKYOPK Polaris Tongue-Type Hitch

• Material: Alloy Steel
• Compatible with Vehicle Type: Snowmobile

Best for: Select Polaris receiver replacement.

Why it ranks #7: This alloy-steel receiver-style hitch targets select Polaris models and lists replacement numbers 2876677, 2874447, and 1013969-067.

Compatibility with select Polaris snowmobiles and replacement references 2876677, 2874447, and 1013969-067 give this tongue-type hitch a specific replacement role. Its alloy-steel construction supports towing a compatible cargo or utility sled, extending hauling options for gear such as ice-fishing equipment, tools, or camping supplies.

This hitch is not presented as a universal bumper clamp: the listing specifies select Polaris models and asks buyers to verify model, year, original part number, and receiver compatibility. That specificity helps identify a replacement path when those details match. The tongue-type format connects a compatible cargo or utility sled, while alloy steel is the listed material. The stated model coverage includes selected Voyageur, INDY, and Switchback variants, so the fit list—not the brand name alone—should guide selection.

Skip it if you need a broadly compatible bumper clamp; MWEDP's hitch lists several snowmobile brands and adjustable bumper width.

This is for Polaris owners matching a listed model and receiver who want to tow a cargo or utility sled. Confirm the model-specific fit and replacement reference before relying on it.

Listed on Amazon as: Snowmobile Tow Hitch for Polaris, 2876677 Tongue-Type Hitch & Pin

#8

8. Jetuplusllc Polaris Receiver Hitch

• Weight: 647 g
• Compatible with Vehicle Type: Snowmobile

Best for: Polaris standard receiver hitch.

Why it ranks #8: A vehicle-specific Polaris receiver option with an alloy-steel body, powder-coated finish, and mounting lock pin; it requires a Polaris receiver.

A mounting lock pin and Polaris receiver requirement define this tongue-type hitch’s role in a towing setup. The Jetuplusllc hitch references replacement numbers 2876677, 2874447, and 1013969-067, and its alloy-steel construction carries an e-coat and black powder-coated finish for a specified protective surface.

This is a vehicle-specific Polaris receiver hitch, not a universal bumper mount, so the receiving system is the first fit condition. The mounting lock pin adds a stated securing element at the connection, while the e-coat and black powder-coated finish describe its surface treatment. Its replacement references help buyers compare it with an existing hitch. The product is presented for reliable towing, but the supplied details do not give a broad model list, so receiver compatibility must guide selection.

Skip it if you need an adjustable bumper clamp across several makes; MWEDP lists compatibility with multiple snowmobile brands.

This is for a Polaris owner whose snowmobile has the required receiver and who needs a tongue-type hitch with a mounting lock pin. Receiver compatibility is the central fit boundary.

Listed on Amazon as: 2876677 Snowmobile Tow Hitch for Polaris – Tongue-Type Standard Hitch

#9

9. ElaraBerry Snowmobile Pintle Hitch

• Weight: 2.2 lb
• Compatible with Vehicle Type: Snowmobile

Best for: Select Arctic Cat replacements.

Why it ranks #9: Its steel construction suits select Arctic Cat and many Bearcat applications, but the listed fitment excludes Kitty Cat and AWS models.

A 7.3-by-4.3-by-2.6-inch steel pintle hitch gives Arctic Cat owners specific dimensions to compare with a replacement mounting point. It is described as a replacement sleigh hitch for select Arctic Cat models, including many Bearcat applications, and its stated use includes towing sleds and gear trailers.

The steel construction and silver protective finish suit buyers looking for a metal replacement hitch for winter hauling. Its pintle format is described for pulling ice-fishing sleds, gear trailers, or utility sleds, giving it a clear role beyond a generic bumper attachment. The approximately 7.3-by-4.3-by-2.6-inch dimensions and mounting-hole position matter for replacement fit, so compare them with the original part. The listing explicitly excludes Kitty Cat and AWS models, making model-specific fit essential.

Skip it if you own a Kitty Cat or AWS model; this hitch is explicitly listed as incompatible with those snowmobiles.

This is aimed at Arctic Cat owners replacing a compatible sleigh hitch for sled or gear-trailer towing. Compare the mounting-hole position and dimensions with the original, and exclude Kitty Cat and AWS models.

Listed on Amazon as: Snowmobile Pintle Hitch Heavy Duty Steel Trailer Towing Hook

#10

10. Yaocom 32-Inch Tow Hitch

• Material: Iron
• Weight: 2.8 lb
• Compatible with Vehicle Type: ATV, Snowmobile, UTV

Best for: Multi-vehicle receiver tow bar.

Why it ranks #10: This iron tow bar is compatible with snowmobiles, ATVs, and UTVs, but its receiver-oriented design is less specific than the bumper and model-fit options.

A 32-inch tow bar that connects to most types of receivers gives the Yaocom hitch a different role from a compact bumper clamp. It is listed for snowmobiles, ATVs, and UTVs, enabling one receiver-style mount to tow sleds, ice-fishing shanties, or cargo trailers across those vehicle types.

The receiver connection makes this a fit for vehicles with a mounting device, and the listed 32-inch length defines the tow-bar format. Iron construction with a galvanized surface is described as providing a degree of rust protection, a relevant detail for winter use. Installation uses bolts and nuts, and the listing says no special tools are required. Its stated applications include sleds, ice-fishing shelters, and small trailers, while receiver compatibility remains essential.

Skip it if you need a direct bumper clamp; MWEDP's adjustable hitch mounts on a snowmobile bumper.

This suits riders towing sleds or small trailers from a receiver-equipped snowmobile, ATV, or UTV. Its 32-inch tow-bar form is a different fit from a direct bumper-mounted hitch.

Listed on Amazon as: Yaocom 32" Tow Hitch for Snowmobile & ATV, Portable Tow Bar for Sleds