Best Hinges For Trailer Ramp: Compare 10-Inch and Gate Styles

#1 · Best Overall

1. SPARKWHIZ 10" Ramp Hinges

• Dimensions: 10"L x 10"W
• Material: Steel
• Dimensions L x W: 10"L x 10"W

Best for: Greasable ramp-gate weld-on set.

Why it ranks #1: The four-hinge set is made for 4–10-inch ramp doors and combines heavy steel, weld-on installation, and greaseability for direct trailer use.

A greaseable design pairs with heavy steel construction to give this four-hinge SPARKWHIZ set a maintenance point for frequently swung trailer gates. Its stated suitability for 4- to 10-inch hinges and weld-on installation makes it relevant to ramp-gate projects where the mounting plan calls for welding rather than bolt-on hardware.

The four-piece pack gives installers multiple hinges for a ramp or gate project, while the weld-on construction supports a direct welded attachment. Greaseability provides a way to lubricate the hinge after installation, and the heavy steel material is specified as corrosion resistant. SPARKWHIZ lists the hinges for trailer ramp gates and other hinge applications, so the set can serve more than one type of welded gate project. Check the stated 4- to 10-inch suitability against your installation.

Skip it if you need a stated 900-pound capacity; SANKINS model a9c32011-f89a-47af-a0a6-a93258caf5a8 lists that rating.

Choose this set if you need four greasable steel hinges for a welded trailer ramp gate and value corrosion resistance. Its listed 4- to 10-inch suitability is a key fit consideration; the installation itself requires welding.

Listed on Amazon as: Weld On Trailer Ramp Hinge 10", Greasable Ramp Door Hinges, Pack of 4

#2 · Best Specified Set

2. enenfeifei Trailer Hinges

• Dimensions: 10"L x 1"W
• Material: Steel
• Dimensions L x W: 10"L x 1"W

Best for: Four-piece 9-gauge ramp hinges.

Why it ranks #2: Four 1-by-10-inch weld-on hinges include grease fittings and specify 9-gauge steel, a 7/16-inch pin, and a raised center portion.

A specified 9-gauge steel construction sets these enenfeifei hinges apart for buyers planning a four-piece, 10-inch ramp-door installation. Each weld-on hinge includes an integrated grease fitting and a raised center portion with steel wrap, combining a stated material gauge with lubrication access for ongoing use.

The four-hinge quantity supports a multi-point ramp-door layout, and the 10-inch length identifies the size for installation planning. Integrated grease fittings give a maintenance point after welding, while the raised center portion with steel wrap describes the joint construction. The 9-gauge steel specification and 7/16-inch pin diameter offer additional details for assessing the hardware. These hinges have a raw-steel finish, so buyers should account for that surface when planning an outdoor trailer installation.

Skip it if you need hinges with a stated 900-pound capacity; Pixplex model 5fd926e9-feaa-4b28-a5a6-3cb5b6d5fb32 specifies that rating.

Choose this set for a welded trailer ramp door needing four 10-inch hinges with grease fittings and a stated steel gauge. Its raw-steel finish and 7/16-inch pin diameter are relevant considerations for outdoor care and installation layout.

Listed on Amazon as: Trailer Ramp Door Hinges, Weld-On, 1" x 10", Grease Fitting, 9 Ga. Steel, 4 Pack, Heavy-Duty

#3 · Best Warranty

3. TOPICK 10" Ramp Hinges

• Dimensions: 10"L x 10"W
• Material: Iron
• Dimensions L x W: 10"L x 10"W

Best for: Four-piece greasable ramp set.

Why it ranks #3: This four-piece weld-on set is sized for 4–10-inch ramp doors or gates and lists iron construction plus a one-year manufacturer warranty.

A four-hinge pack with greaseable construction makes TOPICK a useful option for ramp and gate installations that need lubrication after welding. The hinges are specified for 4- to 10-inch ramp doors or gates, and their direct weld-on mounting targets a secure attachment to trailer frames without relying on bolt-on replacements.

The four-piece pack can cover a multi-hinge ramp installation, while the stated 4- to 10-inch range helps narrow the intended door or gate size. TOPICK describes the hinges as welding directly to trailer frames, giving installers a mounting approach for projects already set up for welding. Greasability supports lubrication after installation, and the iron construction is specified for this hinge set. Buyers should plan for welded mounting and check the range against their ramp-door setup.

Skip it if you need a stated load capacity; SANKINS model a9c32011-f89a-47af-a0a6-a93258caf5a8 lists a 900-pound rating.

TOPICK suits buyers installing four greasable hinges on a trailer ramp or gate within the stated 4- to 10-inch range. It is a weld-on choice, so it does not suit a project that calls for bolt-on hardware.

Listed on Amazon as: 10" Weld On Trailer Ramp Hinge, Heavy Steel Greasable Ramp Door Hinges

#4

4. MGWILL 10" Ramp Hinges

• Dimensions: 3.75"L
• Material: Steel
• Dimensions L x W: 3.75"L

Best for: Ten-inch greaseable ramp hinges.

Why it ranks #4: Three 10-by-1-inch raw-steel trailer ramp hinges have integrated grease fittings, a 7/16-inch pin, and a raised center with steel wrap.

A raised center portion with a steel wrap distinguishes MGWILL’s 10-inch ramp-door hinges, while integrated grease fittings provide a lubrication point after installation. This three-piece raw-steel set is specifically listed for weld-on utility trailer ramp doors, with a 7/16-inch pin diameter and approximately 3-3/4-inch center shank.

The 10-inch length and straight weld-on format suit ramp-door installations planned around that hinge size. Integrated grease fittings support maintenance after welding, while the raised center portion and steel wrap describe the hinge’s construction around the joint. The approximately 3-3/4-inch center shank and 7/16-inch pin diameter give installers measurements to consider during layout. Three hinges are included, and the raw-steel finish is a factor for buyers planning an outdoor installation and its surface care.

Skip it if you need four 10-inch hinges rather than three; enenfeifei model 0680140858169 lists a four-piece set.

MGWILL suits buyers welding 10-inch greasable hinges onto a utility trailer ramp door and who can use a three-piece pack. Its raw-steel finish and stated pin and shank dimensions matter for surface care and layout.

Listed on Amazon as: MGWILL 3 Pack Ramp Door Hinges 10" Weld On Straight Greaseable Utility Trailer Heavy Duty

#5 · Largest Pack

5. Otoolling 10" Hinges

• Dimensions: 0.39"L x 0.39"W
• Material: Alloy Steel
• Dimensions L x W: 0.39"L x 0.39"W

Best for: Multi-hinge ramp-door projects.

Why it ranks #5: The six-piece set provides 1-by-10-inch trailer door hinges made from alloy steel, a useful format for multi-hinge installations or spares.

Six 1-by-10-inch hinges make the Otoolling set a practical match for multi-part trailer-door work or keeping spares on hand. The raw-steel hinges are weld-on and are described as able to withstand frequent opening and closing and heavy impact, giving repair and assembly projects a larger matching set.

The six-piece quantity can cover a multi-hinge installation or leave spare hinges for later repairs, reducing the need to source another matching set mid-project. Each hinge is specified as 1 by 10 inches and made from raw steel, with weld-on mounting for a welded trailer frame. The product description says the hinges resist deformation and handle repeated opening, closing, and heavy impact. Because the surface is raw steel, buyers should account for finish needs in their installation environment.

Skip it if you need grease fittings for ongoing lubrication; HOHNNYREET model 6 inch Heavy Duty Weld on Hinges specifies them.

This set fits buyers repairing or assembling a trailer ramp door who need six matching 1-by-10-inch weld-on hinges. Its raw-steel surface and lack of a listed grease fitting are relevant boundaries for outdoor maintenance plans.

Listed on Amazon as: 6 Pcs 1" x 10" Trailer Ramp Door Hinges

#6 · Greaseable Short Hinge

6. HOHNNYREET 6" Hinges

• Dimensions: 6"L x 0.7"W
• Material: Carbon Steel
• Dimensions L x W: 6"L x 0.7"W

Best for: Lubrication-ready utility ramps.

Why it ranks #6: Four 6-inch carbon-steel weld-on hinges include grease fittings, suiting buyers who need a shorter hinge and ongoing lubrication access.

Integrated grease fittings are the defining feature of these four 6-inch HOHNNYREET hinges, giving installers a direct way to lubricate the joints after welding. Carbon steel construction and the listed uses—trailer ramps, utility trailers, metal gates, and BBQ smokers—make the set relevant to several welded swing-hinge projects.

The grease fittings let users add lubrication after installation, a useful maintenance step for hinges that need smooth swinging. Four hinges are included, giving buyers a coordinated set for a multi-hinge project. Their 6-inch length and carbon-steel construction identify the hardware, while weld-on mounting suits metal frames that can be welded. The product lists trailer ramps and utility trailers among its applications, but does not state a load capacity, so buyers needing a rated limit should use a product with a stated figure.

Skip it if you require a stated 900-pound capacity; Letowe model Letowe lists that rating for its 7-inch hinges.

These suit buyers who want four greaseable 6-inch weld-on hinges for a trailer ramp or utility trailer. Their stated size and lack of a listed load rating are important boundaries when matching the set to a specific gate.

Listed on Amazon as: 4 Pack 6 Inch Heavy Duty Weld On Hinges, Bullet Barrel Weldable Hinges with Grease Fitting, Carbon Steel Weld On Hinge for Trailer Ramp, Utility Trailer, Heavy Swing Gate

#7

7. MOUNTAIN_ARK Weldable Hinges

• Dimensions: 4.57"L x 4.17"W
• Material: Low Carbon Steel
• Dimensions L x W: 4.57"L x 4.17"W

Best for: Wide-opening removable-pin hinges.

Why it ranks #7: These four low-carbon-steel weldable hinges measure 4-1/2 by 4-1/4 inches and list a 440-pound maximum load per pair.

A maximum 285-degree rotation angle gives these MOUNTAIN_ARK hinges a wide opening range for a metal trailer ramp gate. Their removable pin adds a separable hinge option, while the four-piece pack and 440-pound-per-pair load specification give buyers concrete details for planning the installation and its supported load.

The 285-degree maximum rotation can accommodate a broad swing path where a ramp gate needs to open widely. Removable pins provide a way to separate the hinge components, which can help with gate handling during installation or later work. The low-carbon-steel hinges measure 4-1/2 by 4-1/4 inches and are 3/16 inch thick; the stated 440-pound maximum applies per pair. The plain finish is a practical consideration when choosing treatment for the installed steel.

Skip it if you need a coated 7-inch hinge with a 900-pound capacity; Pixplex model 5fd926e9-feaa-4b28-a5a6-3cb5b6d5fb32 lists both.

Pick these for a welded metal ramp gate where wide rotation and a removable pin matter. The 440-pound rating is per pair, not the four-piece pack, and the plain finish makes surface protection worth considering.

Listed on Amazon as: 4 Pack Weldable Hinge, Heavy Duty Weld On Hinge for Metal Trailer Ramp Gate

#8

8. SANKINS 7-Inch Hinges

• Dimensions: 7"L x 7"W
• Material: Steel
• Dimensions L x W: 7"L x 7"W

Best for: Rated heavy swinging gates.

Why it ranks #8: The two 7-inch steel weld-on hinges list a 900-pound capacity and a black matte coating, but are described broadly as gate hinges.

A stated 900-pound capacity is the defining specification of these 7-inch SANKINS hinges, giving buyers a clear load figure for a heavy swinging gate or trailer ramp. Their solid steel construction and thickened mounting plate also address support at the welded joint, while the black matte coating suits outdoor use.

SANKINS specifies a 900-pound capacity for the 7-inch steel hinges, which helps buyers assess them against a gate's load requirement. The thickened mounting plate is intended to stabilize the gate and help resist sagging or warping. A black matte coating provides corrosion resistance for outdoor placement. This two-piece set is weld-on, so it suits projects where welding is part of the mounting workflow; its capacity and 7-inch size should guide selection for the intended gate.

Skip it if you need four 10-inch ramp-door hinges; TOPICK model WTH-TP-01 comes as a set of four.

This pair suits buyers fitting a 7-inch weld-on hinge to a heavy swinging gate or trailer ramp and needing a stated 900-pound capacity. Plan around the two-hinge pack and confirm the gate layout can use this size.

Listed on Amazon as: 7" Heavy Duty Gate Hinges, Weld on Hinges 900lbs Capacity, Outdoor Trailer Gate Hinge, Barrel Hinges Heavy Duty for Trailer Ramp Outdoor Driveway Gate, 2 Pack

#9

9. Pixplex 7-Inch Hinges

• Dimensions: 7"L x 1.25"W
• Material: steel
• Dimensions L x W: 7"L x 1.25"W

Best for: Coated high-capacity gate pair.

Why it ranks #9: This two-piece, 7-inch steel barrel-hinge set lists a 900-pound capacity and a coated finish for outdoor use, though its focus is general gates.

A stated 900-pound capacity paired with a matte black corrosion-resistant coating defines Pixplex’s two 7-inch barrel hinges. The thick cold-roll steel construction and weld-on mounting target heavy swing gates and trailer ramps, while the specified 1.25-inch barrel and back-plate width help buyers assess the hardware against their installation.

The 900-pound capacity gives a specific load figure for buyers comparing this pair with a gate’s requirements. Its 7-inch length, 1.25-inch barrel diameter, and 1.25-inch back-plate width provide useful dimensions for planning the weld-on placement. Thick cold-roll steel supplies the hinge material, while the matte black coating is described as corrosion resistant for indoor and outdoor use. The two-hinge pack suits a paired installation, but does not supply a larger multi-hinge set.

Skip it if you need four hinges with a removable pin and wide swing; MOUNTAIN_ARK model P-CF1218 HEYE12 specifies both.

Choose Pixplex when a two-hinge, 7-inch welded pair with a stated 900-pound capacity and coated finish suits the gate. Check the specified barrel and back-plate dimensions against the weld location before installation.

Listed on Amazon as: Heavy Duty Gate Hinges 7 Inches – 2 Pack Black Iron Door Hinge Barrel Style 900 Lbs Capacity for Swing Door Trailer Ramp Gate – Weld On Install

#10

10. Letowe 7-Inch Hinges

• Dimensions: 1.25"L x 7"W
• Material: Cast Iron, Iron
• Dimensions L x W: 1.25"L x 7"W

Best for: Greaseable rated gate hinges.

Why it ranks #10: The two 7-inch weld-on hinges list a 900-pound capacity and grease fittings, but offer less specific ramp-door sizing than the higher-ranked options.

A 900-pound capacity and grease fitting combine in Letowe’s 7-inch weld-on barrel hinges, pairing a stated load figure with a maintenance feature. The extra-thick back plates are specified to support secure welding, making this two-piece set relevant to trailer ramps and other heavy swing gates.

The 7-inch hinges carry a stated 900-pound capacity, helping buyers evaluate them against a gate’s load needs. A grease fitting supports lubrication for smoother operation, while the extra-thick back plates are described as helping create a secure weld-on installation. The black iron barrel style is listed for trailer ramps, swing doors, and metal driveway gates. Letowe also describes 5-inch and 7-inch sizes, but this two-piece listing identifies the 7-inch option, so size selection matters.

Skip it if you need six 1-by-10-inch ramp-door hinges; Otoolling model HUU-Otoolling-1374 supplies a six-piece set.

Letowe fits buyers seeking a greaseable 7-inch pair for a welded trailer ramp or swing gate, with a stated 900-pound capacity. The two-hinge quantity and specified size should match the gate’s layout and installation plan.

Listed on Amazon as: Heavy Duty Gate Hinges 7 Inches- 2 Pack Weld On Install Black Iron Barrel Hinge 900lbs Capacity for Swing Door Trailer Ramp Metal Driveway Gate Drive Gate