Best Jack Stands For Mobile Homes: Compare 9 Options

#1 · Best Overall

1. DIOOSN House Jack

• Load Capacity: 16070 lb
• Material: Carbon Steel

Best for: Tall mobile-home support posts.

Why it ranks #1: Explicitly listed for mobile-home leveling and structural support, with a 47–93-inch range and stated 16,070-pound capacity.

A 47-to-93-inch height range makes the DIOOSN steel jack posts a tall-support option for mobile-home leveling and temporary structural work. Each is listed for loads up to 16,070 pounds, and the two-pack includes support hardware for tasks involving beams, floors, ceilings, or walls.

Carbon steel construction and the broad 47-to-93-inch adjustment range distinguish these posts from short RV stabilizers, giving buyers a specification suited to taller support points. The product is described for mobile-home leveling and temporary structural support during construction, renovation, and remodeling. Each post includes an adjustment rod and two Grade 12.9 alloy-steel locking pins, supporting a setup workflow that uses the provided adjustment and locking hardware. The listing identifies this as structural support, not a conventional floor jack tool.

Skip it if you need compact RV stabilizers rather than tall structural posts; SHALL SH212002AE adjusts from 11 to 17 inches for RV stabilization.

The DIOOSN two-pack fits buyers needing tall temporary support for mobile-home leveling, beams, or floors. Its 47-to-93-inch range and structural-support role should match the project and planned support points.

Listed on Amazon as: House Floor Jack, 2 Pack 16070 lbs Structural Support Jack Stand for Basement, 47”-93” Height Range, Beam and Floor Support, Mobile Home Leveling Post Pole, Adjustable Steel Jack Post

#2 · Best Short Shoring Post

2. ZANURA Floor Jack

• Load Capacity: 8800 lb
• Material: Steel
• Dimensions: 12 x 6 x 9 in

Best for: Short-range temporary shoring.

Why it ranks #2: A house floor jack for temporary shoring, renovations, and repairs; adjusts from 11.6 to 16.3 inches and lists 2,200 pounds per jack.

A 5-by-5-inch base plate and 3.5-by-5.9-inch top plate give this steel floor jack defined contact surfaces for temporary shoring. Its 11.6-to-16.3-inch adjustment range suits lower support points during repairs or renovations, including cellar ceilings, sagging floors, decks, porches, and stairways.

Each post is rated for 2,200 pounds, with a stated combined capacity of 8,800 pounds for the four-jack set. That per-post figure matters when planning how to distribute support; the total is not a single-post rating. The 11.6-to-16.3-inch range makes it a short-height option, while the steel construction and specified plate dimensions help buyers assess placement for temporary shoring. The listing describes support during construction, repair, and renovation, not a permanent installation.

Skip it if you need a tall mobile-home support post; this jack stops at 16.3 inches, while DIOOSN JACK-001 reaches 93 inches.

Consider the ZANURA set for temporary, low-height shoring under floors, decks, porches, or stairways. Its short adjustment range and 2,200-pound per-jack rating make height and load planning important.

Listed on Amazon as: 11" – 16" Adjustable House Floor Jack Post Screw Home for Leveling Lifting

#3 · Highest RV Capacity

3. SHALL RV Stabilizer

• Load Capacity: 7500 lb
• Material: Aluminum
• Dimensions: 6.9 x 7 x 14.9 in

Best for: High-capacity RV stabilizing.

Why it ranks #3: Its four aluminum stabilizers each list 7,500-pound support and adjust from 11 to 17 inches, but the maker says stabilization only.

A stated 7,500-pound capacity per jack gives this four-pack a substantial support rating for parked RVs and trailers. The aluminum screw jacks adjust from 11 to 17 inches, helping owners steady a vehicle at different support heights after parking rather than relying on them to lift it.

The 11-to-17-inch adjustment range helps accommodate varying support points, while the screw style allows height to be set for leveling on uneven ground. Die-cast aluminum is described as rust-proof and scratch-resistant, a useful combination for jacks stored and used in outdoor conditions. Four jacks, plus spare nuts and pads, are included. The key operating boundary is explicit: these are for stabilization only, so use them after the RV is positioned, not to raise it.

Skip it if you need posts for lifting or permanent structural support; these are RV stabilizers, while DIOOSN JACK-001 is listed for temporary structural support.

Choose this SHALL set to steady a parked RV or trailer when its 11-to-17-inch range suits the support height. It is not a lifting jack, so keep its role to stabilization after parking.

Listed on Amazon as: SHALL RV Stabilizer Jacks, 4-Pack Heavy Duty Aluminum Jack Stands for Travel Trailer Camper, Single Support up to 7500 Lbs, RV Leveling Screw Jack with Spare Nuts & Pads, Adjustable from 11" to 17"

#4 · High-Capacity RV Set

4. Aluminum Stack Jacks

• Load Capacity: 7500 lb
• Material: Aluminum
• Dimensions: 6.14 x 6.14 x 11 in

Best for: Parked-RV bounce reduction.

Why it ranks #4: Four aluminum stabilizers list 7,500 pounds each and an 11–17-inch range; the stated purpose is reducing movement in a parked RV.

A smooth screw-style T-handle lets you adjust these aluminum stack jacks from 11 to 17 inches, helping steady a parked and leveled RV. The listing specifically targets side-to-side sway, floor bounce, and movement, making this set relevant to everyday campsite use rather than vehicle lifting.

The four-pack includes rubber pads, which pair with the aluminum jacks to provide the listed stabilizing setup at support points. Their 11-to-17-inch range is identified as suitable for lower-clearance travel trailers and pop-up campers, so measuring support height beforehand helps establish whether they reach. Used after the RV is parked and leveled, they are intended to reduce movement during walking, cooking, and sleeping. The product is a stabilizer set, not a lifting solution.

Skip it if you need support taller than 17 inches; DIOOSN JACK-001 has a listed 47-to-93-inch range for structural support.

This set suits owners of parked, already-leveled RVs seeking less bounce during campsite routines, especially with lower-clearance trailers. Check that the 11-to-17-inch adjustment range matches the support points.

Listed on Amazon as: RV Stabilizer Jacks 4 Pack, 7500 lbs Each, Aluminum Stack Jacks 11-17 in

#5

5. OULEME Stack Jacks

• Load Capacity: 7900 lb
• Material: Aluminum
• Dimensions: 7 x 7 x 12.6 in

Best for: High-capacity aluminum RV jacks.

Why it ranks #5: The listed 7,900-pound capacity is notable among the RV stabilizers, but the product is specified for RV use rather than mobile-home structural support.

A listed 7,900-pound capacity gives these aluminum RV stack jacks the highest stated per-jack rating among the supplied RV stabilizer specifications. The four-pack is identified for leveling and stabilizing, offering a capacity-focused option for owners comparing support ratings for a parked recreational vehicle.

The aluminum construction keeps the material specification clear, while the 7,900-pound load-capacity figure gives buyers a defined rating to consider for each jack. The product title identifies a four-pack for RV leveling and stabilization, so the intended workflow is support after parking rather than structural repair. The supplied specifications do not state an adjustment range or included components. That leaves height compatibility and what is in the package less clear from these product facts than the load rating.

Skip it if you need a stated height range for selecting stabilizers; SHALL SH212002AE specifies adjustment from 11 to 17 inches.

Consider OULEME if the listed 7,900-pound capacity and aluminum construction are priorities for RV leveling and stabilization. Since no adjustment range is supplied here, establish height suitability before choosing it.

Listed on Amazon as: 4PK RV Leveling & Stabilizer Jacks,7900 lbs Camper Stack Jack Stands

#6

6. EZUVITA Stabilizer Jacks

• Load Capacity: 6600 LBS
• Dimensions: 6.3 x 6.3 x 14.17 in

Best for: Orange high-capacity RV set.

Why it ranks #6: Four RV stabilizers are listed at 6,600 pounds each, with aluminum construction; their described use is steadying a camper or motorhome.

A stated 6,600-pound capacity per jack and 5-millimeter wall thickness define this four-pack’s support specifications for RVs and trailers. Its high-visibility orange, rust-proof aluminum construction also makes the jacks easier to distinguish around a parked vehicle and suitable for outdoor use as described.

The listing gives a combined capacity of 26,400 pounds across the four-jack set, alongside the 6,600-pound individual rating; buyers should use the per-jack figure when considering each support point. Rust-proof aluminum is specified for the body, while the orange finish is described as high visibility. These details speak to outdoor handling and visibility, but the supplied information does not state an adjustment range. Confirm that the listed specifications suit the intended stabilizing setup before choosing this set.

Skip it if you need a stated height range before selecting stabilizers; SHALL SH212002AE lists adjustment from 11 to 17 inches.

The EZUVITA set fits RV or trailer owners prioritizing its stated per-jack capacity, rust-proof aluminum, and visible orange finish. The supplied details do not specify adjustment height, so that is a key fit consideration.

Listed on Amazon as: 4-Pack 6600LBS RV Stabilizer Jacks Set

#7

7. X-Haibei Stack Jacks

• Load Capacity: 6000 lb
• Material: Aluminum
• Dimensions: 6.1 x 6.1 x 8.5 in

Best for: Compact aluminum RV stabilizers.

Why it ranks #7: Four aluminum RV stabilizers adjust from 11 to 17 inches and list 6,000 pounds each; the listing explicitly says not to use them to raise.

Compact 6.1-inch-square bases make these aluminum stack jacks easier to store between trips while providing a 6,000-pound rating per jack. Their 11-to-17-inch adjustment range supports leveling and stabilizing a parked RV, camper, or trailer across different support heights.

The screw-adjustable 11-to-17-inch range helps set support height after the recreational vehicle is parked, and the aluminum frame is described as resistant to outdoor rust. The four-pack is intended to reduce shaking and tilting when people move inside, making it relevant to campsite comfort and long-term parking. Cushion rubbers are included according to the title. These are stabilizers only: the product specifically warns against using them to raise a vehicle.

Skip it if you need a jack to lift a vehicle or support a structure; these are stabilization-only, while DIOOSN JACK-001 is listed for structural support.

Pick the X-Haibei set for RV, camper, or trailer owners wanting compact, rust-resistant stabilizers for a parked vehicle. Its 11-to-17-inch range must suit the support point, and it must not be used to raise.

Listed on Amazon as: X-Haibei RV Stabilizers Jacks for Trailer Camper 4 Pack Aluminum Stack Jack Stands 6000 Pounds Supports with Cushion Rubbers Adjustable from 11" to 17"

#8 · Longest Warranty

8. WELLUCK RV Stabilizers

• Load Capacity: 6000 lb
• Material: Strong Aluminum Alloy
• Dimensions: 6.2 x 6.2 x 11 in

Best for: Long-warranty RV stabilizers.

Why it ranks #8: Four aluminum-alloy RV stabilizers list 6,000 pounds each and an 11–17-inch range; they are intended to reduce movement, not support a home.

A 10-year manufacturer warranty accompanies these 6,000-pound-rated aluminum alloy stabilizers, offering a clearly stated coverage period alongside their RV-focused use. The four-pack combines a cast square base with thick-walled hollow carbon-steel struts and is listed for campers, RVs, and trailers.

The cast aluminum base and thick-walled hollow carbon-steel struts are described as strong and resistant to rust and corrosion, which supports their use around outdoor vehicles. Each jack’s listed 6,000-pound capacity gives a reference point for support planning, and the four-pack is intended to limit vehicle movement and sway. The listing does not provide an adjustment-height range, so buyers cannot use these supplied facts to compare support height with a particular parking setup.

Skip it if you need a stated adjustment range before buying; SHALL SH212002AE lists an 11-to-17-inch range for its RV stabilizers.

WELLUCK suits RV, camper, and trailer owners who value the listed materials and 10-year warranty for stabilization. The missing height range in the supplied details makes support-point measurement especially important.

Listed on Amazon as: WELLUCK RV Stabilizers Jacks 4 Pack,Screw Jack Stands for RV Camper Travel Trailer Leveling,Aluminum,Single Support Up to 6000 Lbs, Adjustable from 11" to 17"

#9

9. BEBOBLY Stack Jacks

• Load Capacity: 6000 lb
• Material: Strong Aluminum Alloy

Best for: Portable screw-style RV set.

Why it ranks #9: These four RV stabilizers list 6,000 pounds per jack and adjust from 11 to 17 inches, but their stated purpose is leveling and stabilizing trailers.

A cast aluminum square base paired with thick-walled hollow carbon-steel bolts gives these screw jacks a mix of portable construction and stated corrosion resistance. Each is rated for up to 6,000 pounds and adjusts from 11 to 17 inches for stabilizing an RV, trailer, or camper.

The 11-to-17-inch range gives owners a defined adjustment window for leveling and stabilizing after parking, while the square aluminum base and carbon-steel bolts describe the jack’s construction. The listing says the materials resist rust and corrosion and identifies the jacks as portable, useful considerations for travel and outdoor storage. Four are included, with compatibility stated for RVs, trailers, campers, and cargo trailers. Their role is to prevent movement and sway, not to serve as tall structural posts.

Skip it if you need support higher than 17 inches; DIOOSN JACK-001 is listed with a 47-to-93-inch range for structural applications.

The BEBOBLY four-pack suits RV, camper, trailer, or cargo-trailer owners wanting portable screw stabilizers within an 11-to-17-inch range. Choose it only when that range matches the support height needed.

Listed on Amazon as: BEBOBLY RV Stack Jacks 4 Pack, Screw Jack Stands for RV Camper Travel Trailer Leveling, Aluminum Stabilizer Jacks, Single Support Unloading Up to 6000 Lbs, Adjustable from 11" to 17"