Best Aluminum Ramps For Atv: Compare 10 Loading Ramp Options

#1 · Best Overall

1. VENDAV 7.5 ft Folding Ramps

• Dimensions: 89"L x 12"W x 1.9"H
• Weight: 34 lb
• Load Capacity: 1500 lb
• Material: Aluminum

Best for: Dual-track pickup loading.

Why it ranks #1: Purpose-built two-ramp setup for ATVs and UTVs, with an 89-inch length and a 1,500-pound pair rating when the load is evenly distributed.

An approximately 11-inch wheel path between the side rails gives the VENDAV ramps a defined lane for each tire while loading compatible equipment. The two-ramp arrangement suits pickup trucks and trailers, and lets you adjust spacing to the wheel track of an ATV, UTV, mower, or similar vehicle.

Each aluminum ramp measures 89 by 12 inches and is rated for up to 750 pounds; together, the pair supports up to 1,500 pounds when the load is evenly distributed. Positioning the ramps to match the equipment’s wheel spacing supports a straightforward two-track loading workflow for ATVs, four-wheelers, riding mowers, and garden tractors. The listed recommendation also includes motorcycles, dirt bikes, bicycles, and hand trucks, making the set useful for varied wheeled loads. Check weight distribution before loading.

Skip it if you want a broad single ramp surface; the GarveeTech tri-fold ramp measures nearly 50 inches wide.

This set suits buyers loading dual-track equipment into a pickup or trailer and who want to vary ramp spacing for different wheel tracks. Its 1,500-pound pair rating requires evenly distributed weight across both ramps.

Listed on Amazon as: ATV Ramps for Pickup Trucks, 7.5 ft Folding Aluminum Loading Ramps, 2 Pack

#2 · Best Traction

2. Titan Ramps 7.5 ft ATV Ramps

• Dimensions: 91"L x 11.25"W x 6"H
• Weight: 15 lb
• Load Capacity: 1500 lb
• Material: Aluminum

Best for: Traction-focused ATV loading.

Why it ranks #2: The two 7.5-foot ramps have raised traction cutouts and a 1,500-pound capacity, suiting ATV loading where a grippy surface is a priority.

Solid plate surfaces with raised traction cutouts give the Titan Ramps pair a distinctive loading path intended to improve tire grip, including in wet or muddy conditions. The two 7.5-foot folding aluminum ramps are listed for ATVs, motorcycles, dirt bikes, and scooters headed to truck beds or trailers.

Each ramp measures 91 by 11.25 inches, and the two-ramp layout provides separate tracks for compatible equipment. Raised cutouts in the solid plates add traction during loading and unloading, while the aluminum construction keeps the listed ramp weight to 15 pounds. The set supports up to 1,500 pounds and folds for transport or storage. Match the equipment to the paired-ramp arrangement and keep its load within the stated capacity, particularly when using the ramps on wet or muddy approaches.

Skip it if you want a wider 12-inch track; VENDAV’s 89-by-12-inch pair offers that width.

Choose this pair for ATV or motorcycle loading where raised traction cutouts and folding storage matter. Its 91-inch length and 11.25-inch width should suit the equipment’s wheel path, with total load kept within 1,500 pounds.

Listed on Amazon as: 7.5' ATV Loading Ramps, 1,500 lb Capacity, Titan Ramps

#3 · Highest Pair Capacity

3. KROAK 7.5 ft Loading Ramps

• Dimensions: 90"L x 12"W x 12"H
• Weight: 33.2 lb
• Load Capacity: 1800 lb
• Material: Aluminum

Best for: Higher-capacity folding pair.

Why it ranks #3: Rated for 1,800 pounds total, these 90-by-12-inch ramps include load straps and fold to 45.8 inches for storage.

A listed 1,800-pound total capacity gives the KROAK pair a higher stated load limit than many two-ramp options in this roundup. The 90-inch aluminum ramps are intended for ATVs, UTVs, lawn mowers, and small tractors, while quick folding shortens each ramp for storage and transport.

The pair weighs 36.8 pounds according to the feature description, and the quick-folding design reduces each ramp to a compact 45.8 inches for garage or truck-bed storage. That shorter folded length can simplify stowing the set between loading jobs, while the 90-inch extended length provides the ramp run for loading equipment. The 1,800-pound maximum total capacity is specified for the pair, so check the equipment’s weight and distribute the load appropriately. Listed uses include ATVs, UTVs, lawn mowers, and small tractors.

Skip it if you need a single extra-wide ramp surface; the GarveeTech tri-fold ramp spans nearly 50 inches.

Consider this pair for buyers who need the listed 1,800-pound total capacity and want quick folding for storage. It fits ATVs, UTVs, mowers, and small tractors, but confirm the total load stays within the pair limit.

Listed on Amazon as: 7.5FT Aluminum Loading Ramps, 1800 lbs Max Capacity, Folding Ramps for Pickup Truck & Trailer with Load Straps, for Loading Motorcycles, ATVs, Lawn Mowers, and Small Vehicles, 90" L x 12" W (2-Pack)

#4 · Folding Storage

4. MAXIVAMN 7.5 ft Ramps

• Dimensions: 89"L x 12"W x 2"H
• Weight: 14.4 kg
• Load Capacity: 1500 lb
• Material: Aluminum

Best for: ATV and mower two-ramp loads.

Why it ranks #4: This two-ramp ATV and UTV set measures 89 by 12 inches per ramp, folds for storage and carries a 1,500-pound pair rating.

The 89-inch length and 1,500-pound pair rating make this MAXIVAMN set a practical match for loading compatible wheeled equipment into a pickup or trailer. Its two-ramp layout lets you set the spacing to the vehicle’s wheel track, helping keep each tire centered during the climb.

Each aluminum ramp measures 89 by 12 inches and folds for storage, so the pair can be carried and put away after loading without occupying its full extended length. The combined 1,500-pound rating applies when both ramps are positioned properly and the load is evenly distributed; each ramp is rated for up to 750 pounds. Adjusting the spacing to the equipment’s wheel track suits ATVs, UTVs, riding mowers, and garden tractors. Check total equipment weight before use.

Skip it if you need a one-piece, wide loading surface; the GarveeTech 76-by-50-inch tri-fold ramp offers that format.

Choose this pair for an ATV, UTV, riding mower, or garden tractor with a wheel track that can be matched to the ramp spacing. Keep the total load within the pair rating and distribute it evenly.

Listed on Amazon as: Loading Ramps for Pickup Trucks, 7.5 ft Aluminum ATV Ramps, 2 Pack

#5 · Safety Straps

5. TUFFIOM 7 ft Ramps

• Dimensions: 2.4"L x 1.9"W x 84"H
• Weight: 30 lb
• Load Capacity: 1.5E+3 lb
• Material: Aluminum

Best for: Strapped pickup and trailer loading.

Why it ranks #5: The 7-foot aluminum pair is rated at 1,500 pounds and includes an adjustable safety strap on each ramp to help stabilize the setup.

Adjustable safety straps and rubber-coated fingers give the TUFFIOM pair concrete securing details for pickup or trailer loading. The two 7-foot aluminum ramps are listed for ATVs, UTVs, motorcycles, lawn mowers, and dirt bikes, with a stated 1,500-pound load capacity.

Each ramp’s strap connects to the ramp’s middle section and to a sturdy anchor point such as a trailer hitch or bumper, helping stabilize the setup during loading. Rubber-coated fingers are specified to prevent slipping at the contact point, adding another securing element alongside the straps. The pair is made from high-strength aluminum and is described as lightweight and portable, relevant when moving ramps between jobs. Its listed capacity is 1,500 pounds; check that the equipment’s total weight stays within that limit.

Skip it if you require a stated per-ramp capacity; gardhom lists 1,500 pounds per ramp and 3,000 per pair.

This pair suits buyers who want straps and rubber-coated fingers for pickup or trailer loading of listed equipment. Keep the load within the stated 1,500-pound capacity and use a sturdy anchor point for the straps.

Listed on Amazon as: TUFFIOM 7ft Aluminum Truck Ramps 1500lbs Capacity,2pcs Folding Loading ATV Ramps for Pickup Trucks Bed, Trailer Ramp with Load Straps for UTV/Motorcycle/Lawn Mower/Dirt Bike,Lightweight & Portable

#6

6. VEVOR 78-inch Ramps

• Dimensions: 12"L x 2"W x 78"H
• Weight: 20.7 lb
• Load Capacity: 1250 lb
• Material: Aluminum

Best for: Lightweight portable ramp pair.

Why it ranks #6: The pair is rated for 1,250 pounds and includes two safety straps; its 78-inch length and non-slip holes suit lighter ATV loading needs.

At a listed 20.7 pounds, the VEVOR pair is a lighter option for buyers who regularly carry ramps between a truck, trailer, or storage area. Its two 78-inch aluminum ramps have a 1,250-pound capacity and combine non-slip holes with an extension plate for loading support.

The non-slip holes increase friction and help prevent water from accumulating on the ramp surface, a useful detail when conditions are wet. An extension plate is listed to support a secure connection, while two safety straps are included to secure the setup. At 78 inches long and 12 inches wide, the straight ramps suit listed uses including motorcycles, ATVs, lawn mowers, dirt bikes, and garden tractors. The 1,250-pound capacity is the key operating boundary; compare it with the total equipment load before use.

Skip it if you need a pair rated above 1,250 pounds; BestEquip’s 84-by-14-inch pair is rated for 6,000 pounds.

This pair suits buyers who value lighter ramps with straps and water-draining non-slip holes for listed equipment. Its 1,250-pound capacity sets the limit, so select another set if the combined load exceeds it.

Listed on Amazon as: VEVOR Aluminum Ramps, 1250lbs, Straight Ramp with Treads and Load Straps, Portable Loading Ramp for Motorcycles, ATVs, Trucks, Lawn Mower, Dirt Bike, Garden Tractor, 78" L x 12" W, 2Pcs

#7

7. gardhom 7.5 ft Ramps

• Dimensions: 89.8"L x 11"W x 2"H
• Weight: 46.6 lb
• Load Capacity: 3000 lb
• Material: Aluminum

Best for: High-capacity folding pair.

Why it ranks #7: The 89.8-inch pair folds to 45.7 inches and is listed at 3,000 pounds per pair, though its capacity description also says 1,500 pounds per ramp.

A 3,000-pound pair rating sets these gardhom ramps apart for buyers comparing higher-capacity two-ramp sets. Each aluminum ramp is rated up to 1,500 pounds, and the 89.8-inch length supports loading motorcycles, dirt bikes, ATVs, quads, and lawn mowers into a truck bed or trailer.

The two-ramp setup supports different workflows: the product lists one ramp for dirt bikes or motorcycles and two ramps for ATVs, quads, or lawn mowers. Each ramp measures 89.8 by 11.5 inches unfolded and folds to 45.7 by 11.5 inches, making the shorter form more manageable for storage between jobs. Its stated capacity is 1,500 pounds per ramp and 3,000 pounds per pair. Match the number of ramps to the equipment and keep the load within the applicable rating.

Skip it if you need a lighter pair for carrying; VEVOR’s 78-inch aluminum ramp pair is listed at 20.7 pounds.

This set suits buyers prioritizing the stated 3,000-pound pair capacity for equipment loading. Use one ramp for listed motorcycles or dirt bikes and two for ATVs, quads, or mowers, while observing the per-ramp limit.

Listed on Amazon as: gardhom 2PCS 7.5' Aluminum Truck Ramps, ATV UTV Loading Ramps for Pickup

#8

8. BestEquip 84-inch Ramps

• Dimensions: 84"L x 14"W x 2.5"H
• Weight: 42 lb
• Load Capacity: 3000 lb
• Material: Aluminum

Best for: Heavy vehicle trailer loading.

Why it ranks #8: This 84-by-14-inch pair has a listed 6,000-pound combined capacity, but its heavier-duty vehicle focus is less specifically tailored to typical ATV loading.

A 6,000-pound capacity per pair makes the BestEquip ramps the highest-rated option in this lineup for buyers with heavier listed vehicles. Each 84-by-14-inch aluminum ramp carries up to 3,000 pounds, and the hook and plate ramp ends support placement at the loading surface.

The 84-inch length and 14-inch width provide each ramp with a broader track than many 12-inch options, while the pair’s 6,000-pound rating suits loading two- or four-wheeled vehicles onto a truck bed or trailer. Serrated cross rungs add traction under the tires, and the hook end and plate ramp end contribute to the connection at the vehicle and ground. The listing specifies a secure load-height range of 12 to 36 inches to increase longevity, so the loading setup must fall within that range.

Skip it if you load from below 12 inches or above 36 inches; VENDAV’s 89-inch pair has no height range listed here.

Choose these for heavier vehicle loading when the truck or trailer height falls within the specified 12-to-36-inch range. Their 84-by-14-inch tracks suit buyers who can position and use the paired ramps as directed.

Listed on Amazon as: BestEquip 84×14 Inch Aluminum Ramps 6000LBS Capacity Car Trailer Truck ATV Ramps 1 Pair 2 Ramps

#9

9. GarveeTech Tri-Fold Ramp

• Dimensions: 76.38"L x 49.61"W x 1.97"H
• Weight: 38.7 lb
• Load Capacity: 1500 lb
• Material: Aluminum

Best for: Wide single-surface loading.

Why it ranks #9: The wide 76-by-50-inch folding platform has a 1,500-pound capacity and treads, but it is a single ramp surface rather than a matched pair.

A nearly 50-inch-wide ramp surface distinguishes this GarveeTech tri-fold from narrow, separate wheel tracks, enabling a broader loading path for compatible equipment. Its 76-inch length and 1,500-pound total capacity suit pickup and trailer jobs where a single folding ramp is preferable to positioning a pair.

The aluminum ramp measures 76.38 by 49.61 inches, giving equipment a wide continuous surface rather than requiring separate tracks for each tire. Its tri-fold construction reduces the ramp to one-third of its size for transport or home storage, while the 38.7-pound listed weight is relevant when positioning it. A 1,500-pound total capacity is specified, and the product description lists motorcycles, trucks, ATVs, UTVs, tractors, lawnmowers, and snow blowers among its uses. Account for the broad ramp’s dimensions when storing it.

Skip it if you need separate, lighter tracks for carrying; VEVOR’s 78-inch two-ramp set weighs 20.7 pounds.

This ramp suits buyers who want a broad continuous surface for listed vehicles or equipment and have room for its folded footprint. Its 1,500-pound total rating is the boundary to check against the loaded machine.

Listed on Amazon as: Aluminum Tri-Fold Ramp with Treads, Ramps for Pickup Trucks 76"x50"

#10

10. TaiH Leo 10 ft Ramp

• Dimensions: 61.5"L x 17.7"W x 5.5"H
• Weight: 44 lb
• Load Capacity: 1500 lb
• Material: Aluminum

Best for: Long single motorcycle ramp.

Why it ranks #10: This 120-inch-long, 17.7-inch-wide ramp is listed as a single piece, with two recommended, making it a less direct fit for paired ATV wheel paths.

At 120 inches long when unfolded, this TaiH Leo aluminum ramp provides an extended loading surface for motorcycles, dirt bikes, ATVs, and other listed equipment. Its 17.7-inch width offers a broader path than many narrow tracks, while folding shortens the ramp to 61.5 inches for storage.

This is a single ramp, measuring 120 by 17.7 inches in use and 61.5 by 17.7 inches when folded. That extended length and width give the user one broad approach surface for listed uses including motorcycles, dirt bikes, lawn mowers, golf carts, garden tractors, and snowmobiles. The product lists a 1,500-pound capacity, but also recommends two pieces, a meaningful consideration for equipment that needs separate wheel paths. Its aluminum construction supports transport and storage between jobs.

Skip it if you need a ready-made two-ramp set for an ATV; MAXIVAMN’s 89-inch pair is supplied as two ramps.

Choose this for buyers who value a long, broad single ramp for motorcycle or equipment loading and can accommodate its 120-inch unfolded length. For dual-track loading, account for the listing’s recommendation to use two pieces.

Listed on Amazon as: 10FT Motorcycle Ramp for Pickup Trucks, 1PC Aluminum Ramps for ATV/Dirtbike