Best Atv Ramps For Trucks: Compare 10 Ramp Sets

#1 · Best Overall

1. VENDAV 7.5 ft Aluminum Ramps

• Dimensions: 89"L x 12"W x 1.9"H
• Weight: 34 lb
• Load Capacity: 1500 lb
• Material: Aluminum

Best for: Dual-track pickup loading.

Why it ranks #1: The two-ramp ATV and UTV set measures 89 by 12 inches per ramp and is rated for 1,500 pounds per pair when the load is evenly distributed.

An approximately 11-inch wheel path between each ramp’s side rails gives ATV and UTV tires a defined route up to a truck or trailer. VENDAV supplies two 89-inch aluminum ramps, rated for 1,500 pounds per pair when the load is evenly distributed, for wheeled equipment with matching track spacing.

Set the two ramps to match the vehicle’s wheel spacing, then keep each tire within the approximately 11-inch path between the side rails. That layout also suits four-wheelers, riding mowers, and garden tractors, according to the product details. Each ramp measures 89 by 12 inches and is rated for up to 750 pounds, with the pair rated for 1,500 pounds. The aluminum construction and folding format support portability, while the stated capacity requires even load distribution.

Skip it if you need a broad, single-piece loading surface; these two ramps provide separate wheel paths instead of a full-width platform.

The VENDAV pair fits buyers loading an ATV, UTV, mower, or similar wheeled equipment whose track can be matched to two separate ramps. Keep the load within the pair’s rating and distribute weight evenly.

Listed on Amazon as: ATV Ramps for Pickup Trucks, 7.5 ft Folding Aluminum Loading Ramps, 2 Pack

#2 · Highest Capacity

2. KROAK 7.5 ft Aluminum Ramps

• Dimensions: 90"L x 12"W x 12"H
• Weight: 33.2 lb
• Load Capacity: 1800 lb
• Material: Aluminum

Best for: Quick-fold aluminum ramp buyers.

Why it ranks #2: This 90-by-12-inch aluminum pair is rated for 1,800 pounds total and includes load straps, making it a strong fit for heavier compatible equipment.

A quick-fold design lets these KROAK ramps fold to 45.8 inches for storage, while opening to a 90-inch loading length. The aluminum pair is rated for up to 1,800 pounds and includes load straps, a combination suited to ATV, UTV, mower, and small-tractor owners who want longer ramps with compact folded storage.

The 90-inch length provides a longer approach for loading listed equipment, while the 45.8-inch folded length helps manage storage in a garage or truck bed. KROAK specifies a one-second folding action, making setup and packing away a quick part of the loading workflow. The pair’s 1,800-pound maximum capacity applies to the set, and load straps are included. Aluminum construction keeps the pair’s listed weight at 33.2 pounds, though equipment weight still needs to remain within the stated capacity.

Skip it if you need more than 1,800 pounds of pair capacity; these aluminum ramps are rated to that maximum for the set.

Pick KROAK for a compatible ATV, UTV, mower, or small tractor when long 90-inch ramps and quick folding matter. Check that the total load stays within 1,800 pounds and plan for the folded 45.8-inch storage length.

Listed on Amazon as: 7.5FT Aluminum Loading Ramps, 1800 lbs Max Capacity, Folding Ramps for Pickup Truck & Trailer with Load Straps, for Loading Motorcycles, ATVs, Lawn Mowers, and Small Vehicles, 90" L x 12" W (2-Pack)

#3 · Folding Aluminum Pair

3. MAXIVAMN Aluminum Bi-Fold Ramps

• Dimensions: 89"L x 12"W x 2"H
• Weight: 14.4 kg
• Load Capacity: 1500 lb
• Material: Aluminum

Best for: ATV and mower owners.

Why it ranks #3: The two 89-by-12-inch aluminum ramps suit wheeled equipment such as ATVs and UTVs, with a stated combined capacity of 1,500 pounds.

The 89-inch, two-ramp setup gives wheeled equipment a separate path into a pickup or trailer, with spacing adjustable to match its wheel track. MAXIVAMN rates the pair for 1,500 pounds when the load is evenly distributed, making this a practical option for compatible ATVs, UTVs, riding mowers, and garden tractors.

Each aluminum ramp measures 89 by 12 inches and is rated for up to 750 pounds; together, they support up to 1,500 pounds with the load evenly distributed. Positioning the ramps to match the tires helps keep each wheel centered during loading. The two-ramp format suits equipment with separate wheel tracks rather than a single broad loading surface. Check total equipment weight and distribute it evenly, and consider the 89-inch length when planning storage and loading space.

Skip it if you need a single wide loading platform; this model uses two separate ramps that must be spaced to match the equipment’s wheel track.

Choose the MAXIVAMN pair for an ATV, UTV, mower, or garden tractor with compatible wheel spacing and a load within its evenly distributed 1,500-pound rating. Its separate 89-inch ramps need room for positioning and storage.

Listed on Amazon as: Loading Ramps for Pickup Trucks, 7.5 ft Aluminum ATV Ramps, 2 Pack

#4 · Wide Loading Surface

4. GarveeTech Tri-Fold Ramp

• Dimensions: 76.38"L x 49.61"W x 1.97"H
• Weight: 38.7 lb
• Load Capacity: 1500 lb
• Material: Aluminum

Best for: Wide-platform equipment loading.

Why it ranks #4: Its single 76-by-50-inch aluminum ramp has a 1,500-pound capacity and includes load straps, offering a broad platform for compatible ATV loading.

A 50-inch-wide single ramp surface gives this GarveeTech model a broad loading platform for equipment that does not suit two narrow wheel paths. The aluminum ramp measures about 76 inches long and supports up to 1,500 pounds; its tri-fold construction reduces its folded size to one-third for transport or storage.

The 50-inch-wide surface offers a continuous platform, which can simplify positioning equipment compared with aligning separate ramps. At about 76 inches long, it is specified for pickup beds, trailers, and equipment including motorcycles, ATVs, UTVs, tractors, lawnmowers, and snow blowers. Aluminum keeps the ramp lightweight relative to its stated 1,500-pound capacity, while the tri-fold design reduces its size to one-third when folded. The product description also lists load straps, relevant when securing the ramp for loading.

Skip it if you want two separate wheel-track ramps; this is a single, wide platform that weighs 38.7 pounds.

Consider this GarveeTech ramp for buyers who prefer one broad surface for loading compatible equipment into a truck or trailer. Its 50-inch width and 1,500-pound rating suit that format, but account for its 38.7-pound weight.

Listed on Amazon as: Aluminum Tri-Fold Ramp with Treads, Ramps for Pickup Trucks 76"x50"

#5

5. VEVOR Tri-Folding Truck Ramps

• Dimensions: 76.2"L x 53.9"W x 1.7"H
• Weight: 50.9 lb
• Load Capacity: 1500 lb
• Material: Aluminum Alloy (Grade: 6061-T6)

Best for: Wide tri-fold platform loaders.

Why it ranks #5: This 76-by-54-inch aluminum platform has a 1,500-pound set capacity and non-slip rubber fingers; its three-part set differs from two-ramp pairs.

A 53.9-inch-wide platform opens to give tires a broad path, while VEVOR’s three-piece tri-fold ramp set supports up to 1,500 pounds. Its 76.2-inch length creates a gentler slope for listed equipment, and non-slip rubber fingers and straps address ramp contact and securing during pickup-truck or trailer loading.

The 76.2-by-53.9-inch open platform gives equipment a broad surface, reducing the need to align two separate narrow wheel paths. VEVOR recommends a loading height from 3.9 to 31.5 inches, helping buyers check whether the ramp suits a truck, trailer, or other loading point. The set consists of three ramps, each rated for 500 pounds, for a combined 1,500-pound capacity. Tri-fold storage, straps, and non-slip rubber fingers support packing, securing, and contact at the loading edge.

Skip it if you want a two-ramp set for separate wheel paths; this VEVOR model uses three ramp sections across a wide platform.

This VEVOR set suits buyers who want a wide platform for compatible cars, motorcycles, ATVs, mowers, or tractors. Check the 3.9-to-31.5-inch recommended height range and the 500-pound rating per ramp before loading.

Listed on Amazon as: VEVOR Aluminum Trailer Ramps, 76 x 54 in Tri-Folding Truck Ramps with Straps & Non-Slip Rubber Fingers, 1500LBS Capacity ATV Loading Ramps for Pickup Trucks, Motorcycles, Lawn Mowers, Tractors, Carts

#6 · Highest Pair Capacity

6. Stalwart 69-Inch Steel Ramps

• Dimensions: 69.5"L x 8.86"W x 1.57"H
• Weight: 30.9 lb
• Load Capacity: 2200 lb
• Material: Alloy Steel

Best for: Higher-capacity steel ramp users.

Why it ranks #6: The steel pair is rated for 2,200 pounds combined, but its 69.5-inch length and recommended 34-inch usage height make truck geometry especially important.

A combined 2,200-pound rating sets this Stalwart pair apart for buyers whose compatible equipment exceeds the capacity of many 1,500-pound pairs. Each 69-inch steel ramp is rated for 1,100 pounds and can be used separately for motorcycles or dirt bikes, while the pair handles four-wheeled vehicles within its combined rating.

At 69 inches long, the ramps have a recommended usage height of 34 inches, an important limit when matching them to a truck, trailer, or shed. Each ramp is rated for 1,100 pounds, and the pair’s combined capacity is 2,200 pounds for four-wheeled vehicles. The two-ramp format also allows a single ramp to be used for a motorcycle or dirt bike, according to the product details. Alloy steel construction and folding storage suit repeated loading, but the shorter length calls for attention to the stated height guidance.

Skip it if you need to load to a point above the recommended 34-inch usage height; these ramps are 69 inches long.

The Stalwart pair suits buyers needing its 2,200-pound combined rating or the option to use one ramp for a motorcycle or dirt bike. Match the 69-inch length to the recommended 34-inch usage height.

Listed on Amazon as: Loading Ramps – Set of Two 69-Inch Folding Ramps for ATVs, Motorcycles, Mowers, Carts, and More – 2200lb Combined Capacity Car Ramp Set by Stalwart

#7

7. Arejonner 72.5-Inch Steel Ramps

• Dimensions: 72.5"L x 8.7"W x 1.8"H
• Weight: 34.1 lb
• Load Capacity: 1500 lb
• Material: Alloy Steel

Best for: Traction-focused steel ramp users.

Why it ranks #7: This two-ramp steel set is rated for 1,500 pounds and includes four safety straps and gloves, with a perforated surface described for added traction.

A dense perforated surface gives these 72.5-inch steel ramps traction-focused footing for loading motorcycles, ATVs, mowers, and other listed equipment. The pair carries a stated 1,500-pound capacity and includes four safety straps to secure the ramps, plus gloves for installation, making the setup useful where securing and handling accessories matter.

The perforated surface is specified to increase traction and help prevent wheel slippage, addressing grip during loading in varied weather. Four included safety straps provide a way to secure the ramps in place, while the supplied gloves support installation. Each ramp measures 72.5 inches long by 8.7 inches wide, so buyers should consider both the available loading height and tire path. Alloy steel construction and the pair’s 1,500-pound capacity suit listed equipment such as ATVs, motorcycles, lawn mowers, UTVs, golf carts, and snow blowers.

Skip it if you need longer ramps for your loading setup; these measure 72.5 inches, while the MAXIVAMN aluminum pair measures 89 inches.

Choose the Arejonner pair if its 72.5-inch length suits your loading height and you value a perforated steel surface, securing straps, and installation gloves. Keep equipment within the stated 1,500-pound pair capacity.

Listed on Amazon as: 72.5" Heavy Duty Folding Loading Ramps, 1500lb Capacity, Ideal for Motorcycles, Lawn Mowers, ATVs, UTVs, and More – Pack of 2 with Safety Straps and Gloves

#8

8. Arejonner Sandblasted Steel Ramps

• Dimensions: 71"L x 8.86"W x 3.5"H
• Weight: 34.1 lb
• Load Capacity: 1500 lb
• Material: Alloy Steel

Best for: Traction-minded steel ramp buyers.

Why it ranks #8: The 71-inch steel pair is rated for 1,500 pounds and includes four safety straps; its 8.86-inch width per ramp is relatively narrow.

A sandblasted finish paired with dense perforations gives this Arejonner set two specified traction features for loading motorcycles, ATVs, lawnmowers, and UTVs. The alloy-steel pair has a stated 1,500-pound capacity and includes four safety straps and protective gloves, combining grip-focused surfaces with accessories for securing and installing the ramps.

The perforated surface and sandblasted finish are both described as improving traction, helping address wheel slip during loading. Four safety straps are included to secure the ramps, and protective gloves are provided for installation. The listed dimensions are 71 by 8.86 inches per ramp, making length and width important considerations for the loading height and tire path. Alloy steel construction supports the stated 1,500-pound pair capacity; weigh the equipment and account for how its load is distributed before use.

Skip it if you need more ramp length for your loading height; these are 71 inches long, while KROAK’s aluminum pair measures 90 inches.

This Arejonner set suits buyers who prioritize a sandblasted, perforated steel surface and included securing straps for compatible equipment. Its 71-inch length and 1,500-pound pair rating are key boundaries when planning a loading setup.

Listed on Amazon as: 72.5" Heavy Duty Folding Loading Ramps with Sandblasted Finish, 1500lb Capacity, Ideal for Motorcycles, Lawn Mowers, ATVs, UTVs, and More – Pack of 2 with Safety Straps and Gloves

#9

9. Evcitn 75-Inch Truck Ramps

• Dimensions: 78.7"L x 47.2"W x 7.5"H
• Weight: 36.4 lb
• Load Capacity: 1500 lb
• Material: Iron, Metal, Plastic, Stainless Steel

Best for: Non-slip mower and ATV loading.

Why it ranks #9: This two-pack is rated for 1,500 pounds and advertises textured, perforated traction, but the listed dimensions describe a broad combined footprint rather than each ramp.

Textured treads and perforations give the Evcitn ramps a specifically non-slip loading surface for lawn mowers, motorcycles, dirt bikes, ATVs, and UTVs. The 75-inch pair is rated for 1,500 pounds and uses reinforced construction with professional welding, offering buyers a traction-focused option for loading compatible equipment into pickup trucks.

The textured, perforated surfaces are intended to improve grip while equipment moves up the ramps, addressing wheel slip during loading. Evcitn lists a 1,500-pound capacity for the pair and describes the construction as reinforced and professionally welded. At 75 inches, the ramps are shorter than several 89- and 90-inch options, so loading height is a practical fit consideration. The listed material types include iron, metal, plastic, and stainless steel; check the complete equipment load against the pair’s stated limit.

Skip it if you need a longer approach to your truck bed; these ramps are 75 inches long, while VENDAV’s pair measures 89 inches.

The Evcitn pair suits buyers loading compatible mowers, motorcycles, dirt bikes, ATVs, or UTVs who want textured, perforated treads. Confirm the 75-inch length suits the loading height and keep the combined load within 1,500 pounds.

Listed on Amazon as: Truck Ramps 75" 1500 LBS 2 Pack, Extra Heavy Duty Loading Ramps for Lawn Mower, Portabe Non Slip Motorcycle Ramps for Pickup Trucks, ATV, Dirt Bikes, UTV

#10

10. Temushom 83-Inch Steel Ramps

• Dimensions: 83"L x 9"W x 1.9"H
• Weight: 38 lb
• Load Capacity: 1000 lb
• Material: Alloy Steel

Best for: Lower-height steel ramp setups.

Why it ranks #10: The 83-by-9-inch steel pair fits truck and ATV use, but its 1,000-pound combined capacity is the lowest stated limit in this selection.

An 83-inch length paired with a recommended loading height of up to 30 inches gives these Temushom steel ramps a clearly stated height boundary for truck, trailer, shed, or garage use. The two-ramp set supports 1,000 pounds combined, with each ramp rated for 500 pounds, for compatible motorcycles, mowers, ATVs, and other listed equipment.

The 83-by-9-inch open dimensions provide a defined ramp path, while the recommended loading height of up to 30 inches helps buyers assess whether the incline suits their setup. Each ramp supports 500 pounds, or 1,000 pounds per pair, making load weight a key selection check. Rust-resistant alloy steel and reinforced welded hinges are specified for repeated use. The pair can serve lawn mowers, ATVs, UTVs, motorcycles, and dirt bikes, provided each ramp and the combined rating are respected.

Skip it if you need more than 1,000 pounds of combined capacity; the VEVOR tri-fold ramp set is rated for up to 1,500 pounds.

Choose Temushom for compatible equipment when the 83-inch length and 1,000-pound pair rating fit your setup. Its recommended loading height is up to 30 inches, so check that boundary against your truck, trailer, or shed.

Listed on Amazon as: Temushom 83" Folding Truck Ramps, 1000 Lbs Capacity, 2 Pcs