Best Cheap Tires For Drifting

#1 · Best Overall

1. Hobbypark Hard Plastic Drift Wheels

• Weight: 5.6 oz
• Size: 26mm

Best for: Mounted-Rim 12mm-Hex Set.

Why it ranks #1: Four tires with 12mm hubs, 64mm diameter and 27mm width; compatibility lists Traxxas, Tamiya, HPI and MST platforms.

Hobbypark states that these plastic tires are mounted on their rims rather than glued, a useful distinction for buyers planning installation or tire changes. Their 64mm outside diameter, 27mm width, and 12mm drive hub make the set's basic fit dimensions clear for 1/10 drift-car setups.

The 12mm drive hub identifies the wheel connection, while the 64mm diameter and 27mm width give you measurements to compare with your current setup. Hobbypark lists compatibility with Traxxas 4 Tec, Tamiya TT01 and TT02, HPI RS4 Sprint 2 Flux, HSP Flying Fish, Redcat Lightning EPX, Kyosho Fazer Mk2, and MST RMX 2.0/2.5. Because the tires are mounted, not glued, buyers should account for that construction when planning installation or maintenance; check model clearance before use.

Skip it if you need a rubber tire for your setup; GoolRC Yokomo ZR-DRA competition tires specify a resin compound for asphalt.

A practical pick for 1/10 drift-car owners who want mounted plastic tires and a stated 12mm hub. The compatibility list covers several familiar platforms, but the 64mm diameter and 27mm width still need to suit your car.

Listed on Amazon as: HobbyPark Hard Plastic 12mm Hex RC Drift Wheels and Tires for 1/10 Scale Tamiya HPI Traxxas Kyosho Redcat HSP Drifting, Set of 4

#2 · Best Complete Set

2. GDOOL 63mm Drift Wheels

• Weight: 4.2 oz

Best for: Four 63mm Tires With Lock Nuts.

Why it ranks #2: Includes four 63mm tires and wheels plus four M4 lock nuts; its 12mm hex and 26mm width suit many listed RC models.

This GDOOL package combines four 63mm hard-plastic tires and rims with four M4 wheel lock nuts, providing the main pieces for a four-wheel RC swap. Its 12mm hex hub and 26mm width offer concrete fit references for on-road touring and drift-car owners.

The four-wheel quantity and included M4 lock nuts give buyers a coordinated replacement set, while the 63mm diameter and 26mm width help assess wheel clearance. The 12mm hex hub identifies the drive interface, and GDOOL lists compatibility across several 1:10, 1:12, and 1:16 RC cars, including HSP, Tamiya, and WLtoys examples. The hard-plastic tires are described for drifting on flat surfaces and for dirt-road rally use. They are mounted, not glued, on the rims.

Skip it if you need wheel hex hubs included; GoolRC 61mm replacement tires list a 12mm drive hex with the tire and rim set.

A useful choice for RC owners needing four hard-plastic tires, rims, and M4 lock nuts for a compatible touring or drift car. Note that the listing says the 12mm hub is not included, and verify clearance.

Listed on Amazon as: 4PCS 12mm Hub Wheels,1:10 63mm Hard Plastic RC Drift Cars On Road Touring Racing Bald Tires for Traxxas HSP Tamiya HPI Kyosho On-Road Drifting Car Trucks(White)

#3 · Titanium Finish

3. GoolRC Titanium Drift Tires

• Weight: 0.12 kg
• Size: Small

Best for: Titanium-Finish Replacement Tires.

Why it ranks #3: Four plastic tire-and-rim replacements measure 61mm by 26mm and use a 12mm drive hex for common 1/10 on-road cars.

These GoolRC replacement tires specify a 61mm diameter, 26mm width, and 12mm drive hex, giving owners measurable details for matching a 1/10 on-road drift setup. The titanium finish provides a distinct appearance, while the listing names Traxxas, HSP, Tamiya, HPI, and Kyosho cars.

The 61mm tire diameter and 26mm width provide a practical comparison against existing wheels, while the 12mm hex describes the drive interface. GoolRC identifies the tires and rims as plastic and says the tire is mounted on, but not glued to, the rim. That detail matters when planning installation or maintenance. The stated replacement fit covers 1:10-scale Traxxas, HSP, Tamiya, HPI, and Kyosho on-road drifting cars; check your vehicle's clearance and hex before fitting.

Skip it if you need model-by-model compatibility detail; GDOOL 62mm drift tires list specific platforms such as Tamiya TT01 and TT02.

A sensible option for 1:10 owners replacing on-road drift tires who can verify their own vehicle dimensions. The mounted, unglued construction and stated 12mm hex clarify installation considerations, but the broad brand list is not model-specific.

Listed on Amazon as: GoolRC 4PCS/Set 1/10 Drift Car Tires Hard Tyre Replacement for Traxxas HSP Tamiya HPI Kyosho On-Road Drifting Car (Titanium)

#4 · Best for Asphalt

4. Yokomo DRA Competition Tire

• Weight: 3.2 oz
• Size: Small

Best for: Asphalt Competition Drift Setup.

Why it ranks #4: Its solid resin DRA compound is explicitly designed for asphalt, making it the most surface-specific RC drift option listed.

Yokomo identifies the DRA as a solid-type competition resin drift tire with a compound intended for asphalt roads. That surface-specific detail helps RC drift drivers narrow their choice by running surface, while its stated ability to install on a general 1/10 drift wheel offers a useful setup reference.

The asphalt-oriented resin compound connects the tire to a specific surface, helping drivers select it for asphalt rather than treating it as an all-surface option. Yokomo also says the thickness, tread shape, and sidewall shape were newly designed to match a contemporary drift style, which gives buyers more context than compound alone. It can install on a general 1/10 drift wheel, though the listing notes that a loose fit may require attention. Check wheel fit before setup.

Skip it if you drift mainly on a surface other than asphalt; MECCANIXITY 1/10 hard tires list on-road drifting without an asphalt-specific compound.

A focused choice for 1/10 RC drivers setting up for asphalt competition or practice. Its resin compound is surface-specific, and Yokomo notes that a loose fit may need attention, so check the wheel interface before installing.

Listed on Amazon as: Yokomo DRA Competition Drift tire for Asphalt Surface (ZR-DRA)

#5

5. GDOOL 62mm Drift Tires

• Weight: 1.6 oz

Best for: Silver 12mm-Hex Touring Tires.

Why it ranks #5: Four hard-plastic tires list a 62mm outer diameter, 26mm width and 12mm hex hub, with broad 1/10 touring-car compatibility.

GDOOL gives these silver hard-plastic tires a 62mm outside diameter, 26mm width, and 12mm hex drive hub, letting 1/10 on-road owners compare key fit details before a drift setup change. Its compatibility list covers several touring-car families and named models.

The 62mm diameter and 26mm width provide a practical size check, while the 12mm hex specifies the drive connection for a wheel swap. GDOOL lists Traxxas 4Tec, Tamiya TT01/TT02 and XV01/XV02, HSP Flying Fish, Redcat Lightning EPX, HPI RS4 Sprint 2 Flux, Kyosho WR8, and Sakura D3 compatibility. The hard-plastic construction targets on-road drifting, and the listing also describes the tires as spare or tuning parts. Confirm your chassis clearance before installation.

Skip it if you want a stated mounted, unglued construction; Hobbypark 12mm hex tires explicitly describe their tire-to-rim attachment.

Pick these for a compatible 1/10 touring-car owner seeking silver hard-plastic tires for on-road drifting. The dimensions and named compatibility help narrow fit, but check chassis clearance and note that tire-to-rim attachment is unspecified.

Listed on Amazon as: 4PCS 1/10 Scale Hard Plastic RC Drift Tires – 12mm Hex Hub On-Road Touring Racing Wheels Compatible with Traxxas 4 Tec 2.0 Tamiya TT01 XV01 Kyosho WR8 Sakura WLtoys HPI Touring Racing Car

#6

6. GDOOL Silver Drift Tires

• Weight: 6.7 oz

Best for: 12mm-Hex Touring-Car Drifters.

Why it ranks #6: The 62mm by 26mm hard-plastic tires use 12mm hex hubs and list compatibility with popular 1/10 on-road cars.

A 62mm outside diameter paired with a 12mm hex hub gives these GDOOL hard-plastic tires a clearly specified starting point for 1/10-scale on-road setups. That sizing helps shoppers compare them against existing wheels before swapping to a drift-oriented tire. The listed compatibility spans several touring-car families.

The 26mm width and 62mm diameter give you concrete dimensions to compare with your current setup, while the 12mm hex hub identifies the drive interface. GDOOL lists Traxxas 4Tec, Tamiya TT01 and TT02, HSP Flying Fish, Redcat Lightning EPX, HPI Sprint 2 Flux, Kyosho WR8, and Sakura D3 compatibility. The hard-plastic construction suits an on-road drift setup, and the tires are presented as spares or tuning parts. Check your car's wheel interface and clearance before fitting.

Skip it if you need a stated tire-to-rim mounting method; GoolRC 1/10 replacement tires explicitly say they are mounted, not glued.

Choose these for a 1/10 on-road or touring-car owner who wants hard-plastic drift tires with a stated 12mm hex interface. The listed dimensions and compatibility are useful checks, but confirm your chassis has clearance for the 62mm diameter.

Listed on Amazon as: OD62mm 1/10 Hard Plastic RC Drift Car Tires & Wheel Rims 12mm Hex Tyre Compatible with Traxxas 4Tec HSP Tamiya TT01 XV01 HPI Kyosho 1/10 Scale Drift Drifting RC Cars

#7

7. GDOOL Green Drift Tires

• Weight: 6.9 oz

Best for: Silver 62mm Drift Tire Set.

Why it ranks #7: These hard-plastic 62mm tires specify 26mm width and 12mm hubs, though the listing does not clearly establish the included quantity.

A silver finish distinguishes this GDOOL set, while its 62mm diameter and 26mm width give 1/10 on-road owners concrete dimensions for planning a drift conversion. The 12mm hex hub further identifies its drive connection, making the stated setup details useful when comparing replacement wheels.

The 12mm hex hub specifies the connection, and the 62mm outside diameter with 26mm width lets you compare the tire envelope with your existing wheels. GDOOL names Traxxas 4Tec, Tamiya TT01/TT02 and XV01/XV02, HSP Flying Fish, Redcat Lightning EPX, HPI Sprint 2 Flux, Kyosho WR8, and Sakura D3 among compatible platforms. Its hard-plastic construction is aimed at on-road drifting, and the listing also presents the set as a spare or tuning part. Verify chassis clearance before fitting.

Skip it if you want an explicitly mounted, unglued tire; Hobbypark 12mm hex drift wheels specify that construction.

Consider this set if you want silver hard-plastic tires for a compatible 1/10 on-road or touring car. The stated hub and dimensions help with selection, while chassis clearance and the unspecified tire-to-rim attachment remain worth checking.

Listed on Amazon as: 1/10 Hard Plastic RC Drift Tires – 12mm Hex Hub On-Road Touring Racing Wheels Set for HSP Tamiya HPI Kyosho Redcat ExceedRC WLtoys 144001 On-Road Drifting Drift Cars

#8

8. GoolRC Red Drift Tires

• Weight: 3.84 oz
• Size: Small

Best for: Red-Finish 12mm-Hex Replacements.

Why it ranks #8: The four-piece 61mm by 26mm plastic replacement set uses 12mm hex hubs, but its listed material information is less consistent.

A red finish distinguishes this GoolRC replacement set, which specifies a 61mm tire diameter, 26mm width, and 12mm drive hex for 1:10-scale on-road drift cars. Those measurements help owners compare the tire and wheel package with an existing setup before installing it.

The 61mm diameter and 26mm width give a useful clearance reference, while the 12mm hex identifies the wheel's drive interface. GoolRC lists compatibility with 1:10-scale Traxxas, HSP, Tamiya, HPI, and Kyosho on-road drifting cars. The tires and rims are plastic, and the tire is mounted on the rim rather than glued, a detail that can inform installation and later tire changes. Check your specific vehicle dimensions and available clearance before fitting this replacement set.

Skip it if you need named model-level compatibility; GDOOL 62mm drift tires list platforms including Tamiya TT01, TT02, and XV01.

This set suits a 1:10 on-road RC owner replacing drift tires and wanting a red finish with stated dimensions. Its mounted, unglued construction informs installation, while the broad brand list calls for checking your exact vehicle.

Listed on Amazon as: GoolRC 4PCS/Set 1/10 Drift Car Tires Hard Tyre Replacement for Traxxas HSP Tamiya HPI Kyosho On-Road Drifting Car (Red)

#9

9. MECCANIXITY Hard Drift Tires

• Size: 63mm

Best for: Double-Layer High-Speed Drifters.

Why it ranks #9: A hard-plastic RC drift option with a stated 26mm width and 63mm size, but the listing identifies only two pieces.

A double-layer structure is the key feature of these MECCANIXITY hard-plastic tires, with the supplied description linking it to stronger support and reduced deformation during fast drifting and intense turns. Their 26mm width and 63mm size give 1/10 RC owners dimensions to compare with their current setup.

The double-layer construction is described as supporting the tire and reducing deformation in high-speed drifts and intense turns, a benefit aimed at drivers prioritizing steadier handling. The 26mm width and 63mm diameter provide a concrete size reference for an on-road RC setup. MECCANIXITY identifies these as hard-plastic replacement tires for 1/10 remote-control drift cars and mentions both competition and leisure use. Check your wheel interface and vehicle clearance, since the supplied details do not specify a hub size.

Skip it if you require a stated 12mm hub; GDOOL 62mm drift tires specify a 12mm hex drive connection.

Consider these for a 1/10 RC drifter seeking hard tires with a stated double-layer support structure. The size details help with clearance checks, but buyers who need a specified hub measurement should choose a listing that supplies one.

Listed on Amazon as: MECCANIXITY 2pcs 1/10 RC On-Road Car Tyres RC Drift Tires Hard Black White

#10

10. Segway GoKart Rear Tires

• Weight: 2.8 kg
• Size: 10*2.75

Best for: Segway GoKart Rear Drift Tires.

Why it ranks #10: These are two rubber rear tires for Segway Ninebot GoKart Pro, Pro 2 and S-Max, not 1/10-scale RC drift cars.

Compatibility with the Segway Ninebot GoKart Pro, Pro 2, and S-Max is the defining feature of this two-tire rear replacement set. Its stated 7-inch rim size and 10-by-2.75 size identify the intended GoKart application, rather than the 1/10-scale RC cars covered by many drift-tire options.

The fit is specifically listed for the Ninebot GoKart Pro, Pro 2, and S-Max, and the description says no modification is required for those models. As rear drift tires supplied in a two-pack, they suit a replacement workflow focused on the kart's back wheels. The listing identifies a wear-resistant, high-strength rubber compound and a 100kg load capacity. Those facts make this an entirely different category from small RC drift wheels; buyers should keep the stated Segway models and rear-wheel application in view.

Skip it if you drive a 1/10 RC touring car; GDOOL 62mm 12mm-hex drift tires list RC platforms including Tamiya TT01.

Choose these for a Segway Ninebot GoKart Pro, Pro 2, or S-Max owner replacing rear drift tires. They are not a general RC tire option, and the listed compatibility is specifically for those GoKart models.

Listed on Amazon as: 2 Pack Drift Rear Tires for Segway Ninebot GoKart Pro/Pro 2/S-Max, Wear-Resistant Sport Drifting Tires Replacement Accessories