Best Ice Studs For Snowmobiles: Compare Track and Tire Options

#1 · Best Overall

1. Icemasters 3⁄4-Inch Track Studs

• Material: Carbide

Best for: No-drill snowmobile track traction.

Why it ranks #1: Purpose-built for snowmobile tracks, these carbide screw-in studs provide a 70-degree tip, need no track drilling, and include an installation tool.

Self-tapping threads let these 3/4-inch Icemasters screw into snowmobile track lugs without drilling, a practical feature for riders seeking added lateral traction, acceleration, and braking. Their sharp 70-degree carbide tip is intended to provide bite and control, while the included installation tool supports fitting.

The 70-degree carbide tip and self-tapping threads combine a traction surface with a no-drill installation approach, avoiding the need to drill the track. Icemasters are mounted on top of the thicker part of the lugs, where the product says they provide a better bite and more positive control. The 3/4-inch length suits buyers selecting that listed size, but the lug must be at least 1/2 inch thick; the included tool supports installation.

Skip it if you need the longer listed size; INS Products carbide’s Icemasters 1-inch version serves buyers seeking that length, subject to the same lug-thickness rule.

A useful option for snowmobilers who want screw-in track traction without drilling and prefer the 3/4-inch size. Install only in the thick part of lugs measuring at least 1/2 inch.

Listed on Amazon as: Icemasters Snowmobile Track Traction Studs – 3/4'' Screw-in Traction Studs + Installation Tool

#2 · Longer Track Stud

2. Icemasters 1-Inch Track Studs

• Material: Carbide

Best for: Longer screw-in track studs.

Why it ranks #2: The snowmobile-specific screw-in design offers the same 70-degree carbide tip and no-drill installation as the shorter version, in a 1-inch length.

The 1-inch Icemasters length gives snowmobile riders a longer screw-in option for track lugs, while self-tapping threads allow installation without drilling. A sharp 70-degree carbide tip is intended to improve traction and control, and the product connects the studs with lateral grip, acceleration, and braking.

Self-tapping threads support the no-drill installation method, while the 70-degree carbide tip provides the stated bite for traction and control. Icemasters mount on top of the thicker part of the lugs, where the product says they offer better bite and positive control. This version is 1 inch long, giving buyers the longer of the two listed lengths. The installation tool is included, but the lug must be at least 1/2 inch thick wherever a stud is installed.

Skip it if you need the shorter listed length; INS Products carbide’s 3/4-inch Icemasters version offers that option, with the same minimum lug-thickness requirement.

A fitting choice for snowmobilers who want the 1-inch screw-in length and no-drill track installation. It is only appropriate where the lug section is at least 1/2 inch thick.

Listed on Amazon as: Icemasters Snowmobile Track Traction Studs – 1'' Screw-in Traction Studs + Installation Tool, Increases Lateral Traction, Acceleration and Braking

#3 · Complete Track Kit

3. Fast-Trac Top Gun II Kit

Best for: Complete snowmobile stud-kit shoppers.

Why it ranks #3: This 96-stud kit is specified for Arctic Cat, Polaris, and Yamaha 1.25/1.35 two-ply tracks and includes backers, nuts, tools, and a template.

This Fast-Trac kit combines 96 1.375-inch Top Gun II studs with installation tools and a track drill template, letting snowmobile owners handle marking and fitting with coordinated components. Heat-treated stainless-steel studs have 80-degree mining-grade carbide tips, while the supplied backers and lock nuts complete the hardware package.

The included track marker and drill template support layout before drilling, while the track cutting tool and T25 Torx bit provide task-specific tools for installation. Heat-treated stainless steel and 80-degree carbide tips are specified for the studs; Air Lite XL backers have a track-friendly radius edge, and stainless lock nuts complete the set. The kit is listed for Arctic Cat, Polaris, and Yamaha 1.25/1.35 two-ply tracks. Tunnel protectors are not included, so that part of the setup requires separate planning.

Skip it if you need tunnel protectors bundled with the stud hardware; this kit explicitly excludes them, so plan for that part separately.

A strong match for Arctic Cat, Polaris, or Yamaha owners with listed 1.25/1.35 two-ply tracks who want a coordinated stud-and-tool kit. Tunnel protectors are outside the package and need separate attention.

Listed on Amazon as: Fast-Trac 1.375” Top Gun II Snowmobile Studs Kit Qty 96, Rust-Free & Lightweight, Includes Install Tools & Template, for Arctic Cat, Polaris, Yamaha 1.25/1.35 2-Ply Tracks

#4

4. Kold Kutter 3⁄8-Inch Screws

• Material: Carbon Steel
• Thread Size: 3/8"-8
• Fastener Size: No. 8

Best for: AMA ice-racing screw buyers.

Why it ranks #4: These 250 carbon-steel traction screws are listed for snowmobile tracks and use a V-cut head; their #8, 3/8-inch format suits tire-style installation.

An AMA-approved 3/8-inch traction screw brings Kold Kutter’s V-cut head to ice-racing tire setups, where its two blade-like surfaces are intended to bite into slippery ground. The 250-pack suits buyers preparing multiple tires or keeping a supply of screws for racing and winter use.

The V-cut head provides two cutting surfaces, a feature Kold Kutter connects to traction on ice and snow. Its carbon-steel construction and No. 8, 3/8-inch screw specification give tire builders concrete details for planning a setup. The product is identified as AMA-legal for ice racing, making that approval relevant for racers who need traction hardware meeting the stated rules. Confirm the screw length matches the tire and intended installation.

Skip it if you need a longer 1/2-inch screw; Kold Kutter Racing’s AMA-approved 1/2-inch model is the length-specific alternative.

A fit for ice racers and tire builders who want an AMA-approved screw with a V-cut head and 3/8-inch length. The fixed length makes it a less suitable choice when a setup calls for longer screws.

Listed on Amazon as: Kold Kutter AMA-Approved Traction Screws 250 Pack (#8) 3/8" – Winter Ice & Snow Tire Heavy Duty Studs Spikes for Racing Dirt Bikes, ATVs, Motorcycles, and Snowmobiles Tracks

#5 · Longer Tire Screw

5. Kold Kutter 1⁄2-Inch Screws

• Material: Carbon Steel
• Thread Size: 1/2"-8
• Fastener Size: No. 8

Best for: AMA racing longer-screw buyers.

Why it ranks #5: The 250-pack carbon-steel screws are listed for snowmobile tracks and feature a V-cut head, with a longer 1/2-inch size than the 3/8-inch option.

Kold Kutter’s AMA-approved 1/2-inch traction screw pairs a longer listed length with its V-cut head, whose two blade-like surfaces are intended to bite on ice and snow. The 250-pack suits racers and tire builders preparing multiple tires with this specific screw size.

The V-cut head supplies two cutting surfaces for the aggressive bite described by Kold Kutter, while the 1/2-inch length distinguishes this model for setups calling for a longer screw. Carbon steel and a No. 8 fastener specification add material and size details for tire builders planning installation. Its AMA approval is relevant to ice racers who need that stated compliance. Buyers should choose it only when the 1/2-inch length suits their tire and setup.

Skip it if you need a shorter AMA-approved screw; Kold Kutter Racing’s 3/8-inch 250-pack is the shorter listed option.

A suitable choice for AMA ice racers and tire builders whose setup calls for a 1/2-inch screw with a V-cut head. Choose another length if that dimension does not suit the tire.

Listed on Amazon as: Kold Kutter AMA-Approved Traction Screws 250 Pack (#8) 1/2" – Winter Ice & Snow Tire Heavy Duty Studs Spikes for Racing Dirt Bikes, ATVs, Motorcycles, and Snowmobiles Tracks

#6

6. Aulpq 3⁄8-Inch Traction Screws

• Thread Size: 0.375 inch to 0.5 inch
• Fastener Size: #8-32

Best for: V-head winter tire screw buyers.

Why it ranks #6: The 250-pack #8 screws are listed for snowmobile tracks and have V-shaped cutting heads plus vibration-lock teeth beneath the head.

A V-shaped cutting head gives these Aulpq traction screws two edges intended to dig into ice and snow, targeting riders who need extra grip on winter trails or frozen surfaces. The 250-pack and #8-32 specification provide a clear quantity and fastener size for planning a tire setup.

The V-shaped head is paired with vibration-lock teeth beneath it, which the product says help the screws stay tightly fitted during use. That combination targets both surface bite and retention on tires used in snow or ice. Aulpq lists a 3/8-inch pack size and #8-32 fastener, useful details when planning installation and selecting hardware. The product is listed for motorcycles, dirt bikes, ATVs, and snowmobile tracks, but the supplied facts do not specify an installation tool.

Skip it if you need an AMA-approved racing screw; Kold Kutter Racing’s 3/8-inch 250-pack is specifically identified as AMA-approved.

A sensible choice for buyers seeking V-head traction screws with stated retention teeth and a 3/8-inch size. Make sure that length and the #8-32 fastener specification suit the intended tire setup.

Listed on Amazon as: 3/8" 250 Pack (#8)- Winter Ice & Snow Tire Heavy Duty Studs Spikes for Motorcycles, Racing Dirt Bikes, ATVs and Snowmobiles Tracks

#7

7. Lakapre 3⁄8-Inch Traction Screws

• Material: Carbon Steel
• Thread Size: #8
• Fastener Size: 1/8 in x 3/8 in #8

Best for: V-cut traction screw seekers.

Why it ranks #7: Carbon-steel #8 screws have a V-cut head and locking teeth, with verified traction-screw dimensions; snowmobile track compatibility is less specifically detailed.

A V-cut head gives Lakapre’s carbon-steel traction screws a two-edge profile intended to dig into ice and snow, making them relevant to slippery winter riding. Locking teeth under the head are described as helping screws stay in place during high-speed races and rough use.

The V-cut head is intended to bite into ice and snow, while the under-head locking teeth address retention during rough use and high-speed racing. Those features combine a traction-focused profile with a stated means of keeping the screw firmly seated. Lakapre lists a #8 thread and 3/8-inch size in carbon steel, giving buyers concrete hardware details to compare with their tire setup. The supplied facts list traction screws as the included component but do not provide an installation tool.

Skip it if you need a specifically AMA-approved 3/8-inch screw; Kold Kutter Racing’s AMA-approved 3/8-inch 250-pack matches that stated requirement.

A practical option for winter tire setups where a V-cut profile and under-head locking teeth are priorities. Check that the #8 thread and 3/8-inch size match the intended tire installation.

Listed on Amazon as: Winter Ice & Snow Tire Heavy Duty Studs Spikes(#8) 3/8" Traction Screws

#8 · Installation Tool Included

8. Marrkey 12mm Tire Studs

• Material: Tungsten Carbide, Carbon Steel
• Thread Size: 4mm x 12mm
• Fastener Size: 4mm x 12mm

Best for: Mixed-vehicle tire stud buyers.

Why it ranks #8: The 200 carbide and carbon-steel studs include an installation tool and list snowmobiles among broad applications, but their tire-stud format is not track-specific.

A 4 mm-wide, 12 mm-long tungsten-carbide and carbon-steel screw stud offers a compact option for snowmobile tires alongside several other vehicle types. Its included installation tool supports a drill-based fitting workflow, while the stated guidance to size studs to tread depth helps buyers choose a suitable length for their tire.

The flat-head, right-hand M4 x 0.7 thread pairs with the 4 mm groove diameter, giving buyers specific dimensions to assess against their tire and installation setup. Marrkey says the studs can be installed with a suitable drill and includes an installation tool, which can simplify fitting. The tungsten-carbide and carbon-steel construction is described as hard and durable, while the product guidance calls for matching stud length to tread depth rather than choosing blindly.

Skip it if you need a screw-in track stud that avoids drilling; INS Products carbide Icemasters use self-tapping threads for snowmobile track lugs.

A practical pick for snowmobile owners seeking compact screw studs for tires and who can use a drill for fitting. Check the tire’s tread depth against the 12 mm length before starting installation.

Listed on Amazon as: 12mm Carbide Screw Tire Studs Snow Spikes Anti-Slip/Anti-ice for Car/Snowmobile/Tractor/ATV/UTV/Motorcycle/Short Lug/Bicycles/Shoes with Installation Tool – Pack of 200

#9

9. Ugigrip #13 Tire Studs

• Material: Tungsten

Best for: High-quantity stud-gun users.

Why it ranks #9: This 1,000-piece tungsten-stud pack uses Sandvik carbide pins, but requires a stud gun and is described for tires rather than snowmobile tracks.

A 1,000-piece quantity makes these Ugigrip #13 tungsten tire studs a substantial option for winter tire installations, with a Sandvik tungsten-carbide pin specified for snow and ice traction. Their 12 mm overall length and 11 mm body length give buyers useful dimensions to assess before installation.

The Sandvik tungsten-carbide pin is the stated traction element, while the 12 mm overall length, 11 mm body length, 8.8 mm base, and 4.8 mm shaft provide multiple sizing details for planning. Ugigrip says proper installation requires a stud gun, which is not included, so buyers must arrange that tool. With 1,000 pieces listed, this pack can support a large installation, but the stud dimensions and equipment requirement should be considered first.

Skip it if you need installation equipment included; Marrkey’s 12 mm screw studs include an installation tool and use a drill-based fitting approach.

A match for buyers planning a large winter tire installation who have access to a stud gun and want the listed 12 mm stud size. The required tool is not included, so arrange it before fitting.

Listed on Amazon as: Ugigrip Tungsten Tire Studs for Traction in Winter Snow and Ice (#13)

#10

10. Ugigrip #16 Tire Studs

Best for: Stud-gun-equipped tire owners.

Why it ranks #10: These 500 tungsten tire studs use Sandvik carbide pins and require a stud gun; the supplied description does not identify snowmobile track use.

A Sandvik tungsten-carbide pin in each Ugigrip #16 stud targets winter traction on snow and ice, with 500 pieces for buyers preparing multiple tires or a larger installation. The listed 15 mm overall length and 4.8 mm shaft diameter give installers specific dimensions to consider before using a stud gun.

The 2.4 mm pin diameter and Sandvik tungsten-carbide pin identify the contact element, while the 15 mm overall and 14 mm body lengths help installers assess the stud’s dimensions for their tire setup. Ugigrip states these studs require a stud gun for proper installation, and that tool is not included. The 500-stud quantity supports a substantial fitting job, but buyers need to arrange the specified installation equipment before starting.

Skip it if you do not have access to a stud gun; Marrkey’s 12 mm screw studs include an installation tool and use a drill-based fitting approach.

Best suited to tire owners who want Ugigrip #16 studs and already have access to a stud gun. Check the listed dimensions against the intended tire before committing to this 500-piece installation.

Listed on Amazon as: Ugigrip #16 Tungsten Tire Studs for Traction in Winter Snow and Ice – 500 Studs