Best Hitch Mount For Motorcycle: 10 Carriers Compared

#1 · Best Overall

1. Black Widow Steel Carrier

• Load Capacity: 600 lb
• Material: Steel
• Compatible with Vehicle Type: Off-Road Motorcycle…

Best for: Heavy steel bike haulers.

Why it ranks #1: Its 600-pound capacity, Class III or IV 2-inch hitch fit, wheel chock, and traction-coated steel ramp make it a well-equipped motorcycle hauler.

A 600-pound capacity in a powder-coated 14-gauge steel carrier lets this Black Widow model haul motorcycles, dirt bikes, and scooters on a Class III or IV 2-inch hitch. Grit-coated surfaces on both track and ramp add traction where tires roll during loading and unloading.

The ramp attaches to the carrier's right side, giving the loading workflow a fixed approach direction to plan around. Grit coating on the track and ramp is specified to improve traction during loading, while the 600-pound rating sets the stated payload ceiling. Its steel construction and 98-pound item weight are practical handling considerations when fitting or storing the carrier. Class III or IV 2-inch receiver compatibility defines the hitch boundary for vehicle selection.

Skip it if you need to load from the left side; Black Widow AMC-400 offers a ramp that installs on either side.

This suits riders with a Class III or IV 2-inch receiver who want steel construction, traction-coated loading surfaces, and capacity up to 600 pounds. Plan for its right-side ramp approach and 98-pound carrier weight.

Listed on Amazon as: Black Widow Steel Motorcycle Hitch Carrier, Wheel Chock, 600 lb, 2 In Hitch

#2 · Highest Capacity

2. VEVOR 600-Pound Steel Carrier

• Load Capacity: 600 lb
• Material: Q235B Steel
• Compatible with Vehicle Type: Car

Best for: Higher-capacity steel haulers.

Why it ranks #2: The listed 600-pound capacity leads the clearly specified options, and its 47-inch ramp and 76-by-7-inch track support motorcycle loading.

A stated 600-pound capacity gives this VEVOR steel hitch carrier room for heavier motorcycles, while its 47-inch ramp supports loading without lifting the bike directly onto the track. The listed 76-by-7-inch carrier space provides a defined footprint for assessing wheel placement and vehicle clearance.

The Q235B steel construction accompanies the 600-pound load rating, making capacity the central reason to consider this model for a heavier bike. Its 47-inch ramp helps bridge the height difference during loading, and the 76-by-7-inch carrier area offers a long, narrow track. VEVOR recommends an installation height of 7.87 to 19.7 inches from center hole to ground, a useful vehicle-selection boundary before installation. The listed package includes the carrier.

Skip it if you cannot meet the 7.87–19.7-inch recommended installation height; Black Widow's AMC-400 lists a 400-pound capacity without that height range.

This fits riders hauling a heavier motorcycle on a car or truck with a 2-inch receiver and enough ground-to-center-hole height within the stated range. Its 600-pound limit and steel construction are key selection points.

Listed on Amazon as: VEVOR Motorcycle Carrier, 600 LBS Steel Motorcycle Carrier Hitch Mount with 47" Longer Ramp, Scooter Dirt Bike Trailer Hauler with Ratchet Straps and Stabilizer, for Car, Truck with 2" Hitch Receiver

#3 · Tilting Ramp

3. Mockins Tilting Carrier

• Load Capacity: 500 lb
• Material: Steel
• Compatible with Vehicle Type: Car, Truck, Van

Best for: Tilting ramp e-bike haulers.

Why it ranks #3: Its 500-pound capacity, 83-inch frame, tilting ramp, hitch stabilizer, hitch lock, and straps make it a feature-rich transport option.

A tilting ramp on an 83-inch steel frame lets this Mockins carrier support loading and dismounting workflows for light motorcycles, dirt bikes, scooters, and e-bikes. Its listed 500-pound capacity and tire-width compatibility up to 5.5 inches help define the bikes it can accommodate.

The carrier fits 2-inch receivers and includes a hitch stabilizer and hitch lock, so the package supplies hardware for stabilizing and securing the hitch connection. Four heavy-duty ratchet straps and four loop straps provide multiple tie-downs for the bike. A license plate holder and reflector stickers are also included. At 83 by 6 inches in the title's frame dimensions, it is a long rack, so vehicle clearance and storage space merit consideration alongside the 500-pound limit.

Skip it if you lack room for an 83-inch carrier; Mockins MADRTBKCARBLK39 is the shorter 73-inch alternative with a 47-inch ramp.

Choose this for riders carrying an e-bike, dirt bike, scooter, or light motorcycle within 500 pounds and 5.5-inch tire width. The 83-inch frame and 2-inch receiver fit are important vehicle and storage boundaries.

Listed on Amazon as: Mockins 83" Tilting Motorcycle Hitch Carrier with Ramp w/ 500 Lbs. Capacity

#4 · Aluminum Build

4. Black Widow Aluminum Carrier

• Load Capacity: 400 lb
• Material: Aluminum
• Compatible with Vehicle Type: Motorcycle

Best for: Aluminum carrier for e-bikes.

Why it ranks #4: This 400-pound aluminum carrier fits Class III or IV 2-inch receivers and includes a ramp, anti-tilt device, and youth bike spacer adapter bar.

A 400-pound aluminum frame paired with a roll-on, roll-off ramp lets riders load motorcycles, e-bikes, or fat-tire bikes without towing a bulky trailer. The ramp mounts on either side and secures flat against the carrier, making loading flexible and keeping the stored assembly compact.

The carrier fits Class III or IV 2-inch hitch receivers, giving compatible vehicles a direct hitch-mounted hauling option. Its aluminum construction keeps the rack material distinct from heavier steel designs, while the 400-pound capacity identifies the stated payload limit for bike selection. The included ramp supports roll-on loading from either side, and its flat stowed position helps reduce protruding parts after use. An included anti-rattle device minimizes movement during transport; the youth bike spacer adapter bar is also included.

Skip it if you use a receiver outside Class III or IV 2-inch; VEVOR's 47-inch-ramp carrier is another listed option to consider.

Choose this for a motorcycle or e-bike owner with a compatible Class III or IV 2-inch receiver who values flexible ramp placement and compact stowage. Keep the 400-pound limit in mind when selecting the bike.

Listed on Amazon as: Black Widow Aluminum Motorcycle Hitch Carrier with Ramp for eBike, 400 lb

#5

5. Mockins 500-Pound Carrier

• Load Capacity: 500 lb
• Material: Steel
• Compatible with Vehicle Type: Dirt Motorcycle, Truck

Best for: One-person ramp loading.

Why it ranks #5: The steel carrier is rated for 500 pounds and includes a 47-inch loading ramp, hitch stabilizer, and four ratchet and four loop straps.

A 47-inch integrated ramp on this 73-inch Mockins steel carrier supports one-person loading, reducing the need to lift a bike directly onto the rack. The 500-pound capacity and 5.5-inch track width also provide clear payload and tire-width boundaries for motorcycle, e-bike, or scooter selection.

The 73-inch carrier length and 47-inch ramp define the loading footprint, while the stated 5.5-inch tire compatibility accommodates fat tires and dual-sport wheels within that width. Four loop straps and four ratchet straps are included to secure the loaded bike, and a hitch stabilizer is part of the package. Steel construction and the 500-pound rating frame the load choice. The listed compatible vehicle types include dirt motorcycle and truck, so vehicle fit should stay within those stated categories.

Skip it if you need a listed car or van application; Mockins MA-HM-DBC-83-TLTS-96 lists cars, trucks, and vans as compatible vehicle types.

Consider this for a rider seeking ramp-assisted loading on a truck or dirt-motorcycle application, with a bike no heavier than 500 pounds and tires up to 5.5 inches. Its listed vehicle types set a narrow fit boundary.

Listed on Amazon as: Mockins 500 Lbs. Capacity 73" Motorcycle Hitch Carrier with Loading Ramp

#6

6. ECOTRIC 500-Pound Carrier

• Load Capacity: 500 lb
• Material: Steel
• Compatible with Vehicle Type: Vehicle with 2" square receiver (class II…

Best for: Broad receiver-class compatibility.

Why it ranks #6: Its 500-pound steel frame fits 2-inch square receivers across Classes II through V and supports loading from either side, with a ramp included.

Compatibility with 2-inch square Class II, III, IV, or V receivers makes this ECOTRIC carrier useful across a broad range of hitch classes. Its 500-pound capacity and included ramp give motorcycle owners a defined payload limit and a roll-on route for loading bikes onto the steel frame.

The high-strength steel frame is specified for resistance to flaking, scratching, fading, and wear, supporting repeated use while exposed to ordinary handling. The included ramp enables loading, and the listing says bikes can be loaded from either side, which gives more choice in positioning beside the vehicle. Its 75.91-by-32.24-inch dimensions help buyers plan storage and vehicle clearance. The 500-pound capacity is the relevant upper boundary for choosing a bike and gear combination.

Skip it if you need the listed 600-pound capacity; Black Widow MCC-600 is the better match for that higher payload requirement.

Choose this ECOTRIC when your vehicle has a 2-inch square Class II through V receiver and the loaded bike stays within 500 pounds. Its two-sided loading and large listed footprint suit buyers planning access and storage.

Listed on Amazon as: ECOTRIC 500LB Hitch Mount Motorcycle Carrier Transportation Racks Hitch

#7

7. VEVOR Aluminum Carrier

• Load Capacity: 400 lb
• Material: Aluminum
• Compatible with Vehicle Type: Car

Best for: Aluminum ramp carrier users.

Why it ranks #7: This aluminum carrier weighs 38.6 pounds and is rated for 400 pounds, with a 47-inch ramp; the supplied data does not specify receiver class.

A 47-inch loading ramp and 400-pound capacity give this VEVOR aluminum carrier a practical combination for loading motorcycles, scooters, or e-bikes onto a hitch rack. The long ramp provides a defined roll-up path, while the stated capacity sets a clear payload ceiling for matching the carrier to a bike.

The heavy-duty aluminum construction is described as resistant to deformation, and anodizing is specified to improve corrosion and wear resistance for outdoor use. At 74.88 by 31.73 inches, the carrier has a broad listed footprint, so buyers should account for its dimensions when handling and storing it. The included accessory kit and user manual come with the carrier; its stated 400-pound limit is the key selection boundary for heavier motorcycles.

Skip it if you need capacity above 400 pounds; VEVOR's TD-1004-03 steel carrier lists a 600-pound limit.

This suits riders seeking an aluminum hitch carrier with a 47-inch ramp for a motorcycle, scooter, or e-bike within 400 pounds. Consider its 74.88-by-31.73-inch footprint when planning handling and storage.

Listed on Amazon as: VEVOR Motorcycle Carrier, Aluminum Hitch Mount Rack with 47in Loading Ramp

#8

8. EGO BIKE Steel Carrier

• Load Capacity: 600 lb
• Material: Alloy Steel
• Compatible with Vehicle Type: Scooter, Trailer

Best for: Anti-wobble steel carriers.

Why it ranks #8: The steel carrier includes a ramp and anti-tilt locking device, but its title says 500 pounds while its specification lists a 600-pound capacity.

An anti-tilt locking device is specified to prevent wobble, giving this EGO BIKE steel carrier a stability-focused feature for hauling motocross bikes, scooters, and off-road dirt bikes. The listing provides a loading ramp and a 600-pound capacity in its specifications for setting the payload boundary.

The heavy-duty alloy-steel frame and power-coated construction are described as supporting strength and durability, while the ramp creates a roll-on loading route. An anti-tilt locking device is included to prevent wobble, connecting the hitch setup to a more stable transport workflow. The listed dimensions are 75.91 by 18 by 4.75 inches, and the item weighs 50.8 pounds, useful details for vehicle clearance and handling. Use the specifications' 600-pound capacity when assessing a bike.

Skip it if you need a listed car or truck application; VEVOR TD-1004-03 lists car compatibility and a 600-pound capacity.

This suits scooter, trailer, motocross, or off-road dirt-bike hauling when the 600-pound specification limit is adequate. Its anti-tilt device and ramp are useful, but the listed vehicle compatibility remains a key boundary.

Listed on Amazon as: 500LBS Steel Motorcycle Scooter Dirtbike Carrier Hauler Hitch

#9

9. ECOTRIC Steel Carrier

• Material: Alloy Steel
• Compatible with Vehicle Type: Car

Best for: Narrow-tire steel carrier.

Why it ranks #9: It fits 2-inch Class II or III receivers and includes ratcheting straps, but its tire-width limit is 5.5 inches and capacity is not listed.

A steel hitch hauler that fits 2-inch Class II or III receivers gives compatible cars, trailers, and haulers a way to carry a motorcycle without a separate trailer. Its stated tire-width boundary—no wider than 5 1/2 inches—makes wheel measurement central to deciding whether this carrier suits a particular bike.

The alloy-steel construction provides the rack's stated material basis, while the included pair of 2-by-2-inch ratcheting straps with hooks gives buyers tie-down hardware in the package. Receiver compatibility covers Class II and III 2-inch hitches, but the listing explicitly bars receiver adapters and motorhome tow vehicles. It also says not to tow scooters with this carrier. Those restrictions narrow the use case, so check the listed vehicle and tire conditions before choosing it.

Skip it if you carry a scooter, use a motorhome, need a receiver adapter, or have tires wider than 5 1/2 inches; Mockins MA-HM-DBC-83-TLTS-96 supports tires up to that width.

Consider this ECOTRIC for a bike with tires no wider than 5 1/2 inches and a 2-inch Class II or III receiver on an allowed vehicle. Its explicit scooter and motorhome restrictions are decisive boundaries.

Listed on Amazon as: ECOTRIC Universal Steel Hitch Mount Motorcycle Carrier Motorcycle Receiver

#10

10. Libsaerty Hybrid Carrier

• Load Capacity: 200 lb
• Material: Alloy Steel, Aluminum
• Compatible with Vehicle Type: Motorcycle

Best for: Hybrid-material short-haul racks.

Why it ranks #10: Although its title says 400 pounds, the specifications list a 200-pound capacity; resolve that discrepancy before considering it for a motorcycle.

A steel-and-aluminum construction combines two materials in this Libsaerty hitch carrier, with spray coating and anodizing specified for corrosion, rust, and water resistance. The listing gives a 200-pound load capacity, making that lower stated limit the first factor to weigh against a bike's loaded weight.

The 45.47-by-6.69-inch listed dimensions describe a relatively compact carrier footprint for buyers planning storage, while the 49.6-pound item weight remains a handling consideration during installation. Its included tire limiter and four straps provide components for positioning and securing a bike. The hybrid alloy-steel and aluminum materials, together with the stated protective finishes, support outdoor-use considerations. Despite the title's 400-pound wording, the specifications list a 200-pound capacity, which is the safer limit to use for selection.

Skip it if you need more than the specifications' 200-pound limit; Mockins MADRTBKCARBLK39 lists a 500-pound capacity.

This is for buyers whose motorcycle or other bike stays within the specifications' 200-pound limit and who value a hybrid-material rack with included straps. Resolve the title and specification capacity discrepancy before choosing it.

Listed on Amazon as: Motorcycle Carrier, 400 Lbs Hitch Mount, Aluminum Steel Dirt Bike Hauler