Best Heavy Duty Floor Jack For Lifted Trucks: 10 Options Compared

#1 · Best Overall

1. ROAD DAWG High-Reach Jack

• Load Capacity: 6600 lb
• Material: Stainless Steel
• Compatible with Vehicle Type: Car

Best for: High-reach truck lifting.

Why it ranks #1: Its 3.86-to-30.12-inch range targets high-clearance vehicles, and its description specifically lists offroad trucks; confirm its 6,600-pound capacity suits your truck.

A lifting range from 3.86 to 30.12 inches gives the ROAD DAWG ATZ830027HD unusually broad stated reach, spanning low-profile access and higher chassis positions. Its 3-ton capacity, dual-piston pump, and reinforced foldable arm support buyers considering varied lifting positions for cars, SUVs, and off-road trucks.

The 3.86-inch starting height suits lower chassis access, while the 30.12-inch maximum offers substantial reach for higher vehicles. A dual-piston pump is listed as lifting loads five times faster than a single pump, supporting quicker raising during service. Its reinforced structural foldable arm provides multiple lifting positions, and thick U-channel frame side plates are specified for stability. At 6,600 pounds, capacity remains the load boundary; the 102.2-pound weight also affects repositioning.

Skip it if you need a capacity above 6,600 pounds; the Maxority MAX1901-35X is rated for 11,000 pounds.

This ROAD DAWG suits buyers needing both low entry and high reach for varied vehicle heights. Its 3-ton capacity and 102.2-pound weight define important limits, so assess load needs and how often the jack must be moved.

Listed on Amazon as: Road DAWG Low‐Profile High‐Reach Hydraulic 3 Ton Floor Jack, Black

#2 · Extended-Height Truck Pick

2. BIG RED T83006

• Load Capacity: 3 tons (6,000 lbs)
• Material: Steel
• Compatible with Vehicle Type: Car, Sport Utility Vehicle, Truck, Van

Best for: Extended-height truck owners.

Why it ranks #2: The listing specifically says it fits extended-height trucks and reaches 20-7/8 inches, with a 6,000-pound capacity and an extra saddle.

A maximum lift height of 20-7/8 inches gives the BIG RED T83006 a defined reach for SUVs and extended-height trucks. Its 3-ton capacity and extra saddle add practical context for buyers choosing a trolley jack, while four casters support maneuvering it around a garage or service area.

The 5-7/8-inch minimum height provides a concrete clearance boundary, and the 20-7/8-inch maximum gives buyers a way to compare its reach with their truck’s lifting needs. Its 6,000-pound capacity is specified for cars, trucks, vans, and SUVs. Two large steel casters and two 360-degree swivel casters support repositioning on the floor, while the extra saddle is included for its stated SUV and extended-height truck use. Steel construction suits regular service work.

Skip it if you require a capacity above 6,000 pounds; the YELLOW JACKET AS332HN is listed at 5 tons.

This jack fits buyers who want stated height figures, an extra saddle, and casters for moving it around a garage. Its 3-ton capacity and 20-7/8-inch maximum define the boundary, so compare both figures with your truck and lifting points.

Listed on Amazon as: BIG RED Hydraulic Trolley Service/Floor Jack with Extra Saddle (Fits: SUVs and Extended Height Trucks): 3 Ton (6,000 lb) Capacity, Red, T83006

#3 · Highest Capacity

3. Maxority 5-Ton Low Profile

• Load Capacity: 11000 lb
• Material: Steel
• Compatible with Vehicle Type: Car

Best for: High-capacity workshop lifting.

Why it ranks #3: Its 11,000-pound capacity is the highest listed, and the description includes trucks; the supplied specifications do not state its lifting-height range.

An 11,000-pound capacity gives the Maxority a substantial rating for heavy vehicles, while its low-profile steel construction targets home and workshop maintenance. The dual-piston quick-lift pump is the defining workflow feature, helping reduce the pumping needed to raise a vehicle during service tasks.

The 5-ton capacity is the clearest fit consideration for truck owners: it supports loads up to 11,000 pounds, while the product is also listed for cars and SUVs. Its low-profile style is intended to address access beneath vehicles, and the dual-piston quick-lift pump supports faster raising than a conventional single-piston workflow. Steel construction suits workshop use. At 100 pounds, however, moving it around the garage takes more effort than handling a lighter jack.

Skip it if you need a specified maximum lifting height; the BIG RED T83006 lists a 20-7/8-inch maximum height.

A suitable candidate for workshop owners prioritizing a high stated capacity and dual-piston pumping. Check that its unspecified lift range suits your truck’s frame and service needs; its 100-pound weight also matters if you regularly move jacks between work areas.

Listed on Amazon as: Maxority 5-Ton (11000lbs) Low Profile Hydraulic Super Heavy-Duty Steel Floor Jack with Dual Pistons Quick Lift Pump, Home and Workshop Car Maintenance for Various Vehicles (Red, 5 Ton Low Profile)

#4 · Heavy-Duty Capacity

4. YELLOW JACKET 5 Ton

• Load Capacity: 5 Tons
• Material: Alloy Steel
• Compatible with Vehicle Type: Car

Best for: Five-ton garage lifting.

Why it ranks #4: Rated for 10,000 pounds and described for trucks and other large vehicles, it offers substantial capacity, though the supplied data gives no lift range.

A 5-ton, 10,000-pound capacity is the defining figure for this YELLOW JACKET low-profile hydraulic jack. The listing identifies cars, trucks, SUVs, and other large automotive models as intended vehicle types, making its load rating relevant to heavy-duty garage work while leaving the exact lift range unspecified.

The 10,000-pound capacity gives buyers a clear load figure to compare against their lifting needs, and the low-profile description points to an approach for vehicles with limited underbody clearance. Its hydraulic operation suits garage repairs and DIY maintenance, while alloy-steel construction provides the listed material for regular service use. The product information does not give a minimum or maximum lifting height, so truck owners cannot use the listing alone to verify clearance or final working reach.

Skip it if you need published lift-height figures; the YELLOW JACKET AS84009 specifies a 4-5/16-inch minimum and 19-7/8-inch maximum.

A candidate for buyers prioritizing a 10,000-pound rating and low-profile form for garage lifting. Because no lift range is provided in the supplied details, choose it only when you can establish that its clearance and reach meet your truck’s needs.

Listed on Amazon as: 5 Ton Hydraulic Low Profile Floor Jack, Grey

#5

5. YELLOW JACKET 4 Ton

• Load Capacity: 4 tons
• Material: Alloy Steel
• Compatible with Vehicle Type: Car, Truck

Best for: Higher-capacity dual-pump lifting.

Why it ranks #5: Its 8,800-pound rating and 19-7/8-inch maximum height offer a useful combination, but the 4-5/16-inch minimum may not clear some trucks.

An 8,800-pound capacity combined with a 4-5/16-inch minimum height gives the YELLOW JACKET AS84009 a clear load and clearance profile. Its dual pumps are intended to lift quickly, while a built-in safety valve provides overload protection during floor-jack operation.

The 4-ton rating offers a defined capacity for buyers comparing jacks for trucks and cars, and the stated lift range runs from 4-5/16 to 19-7/8 inches. Dual pumps support quicker lifting, which can reduce the pumping effort during a service workflow. The built-in safety valve is listed to provide overload protection against user injury and jack damage. Heavy-duty steel construction supplies the stated material, while the jack’s 87-pound weight is relevant when positioning it around a workspace.

Skip it if you need a lift height above 19-7/8 inches; the ROAD DAWG ATZ830027HD reaches 30.12 inches.

A fit for buyers seeking a 4-ton jack with dual pumps and a listed overload-protection valve. Its 19-7/8-inch maximum and 87-pound weight are practical boundaries to consider before choosing it for truck service.

Listed on Amazon as: YELLOW JACKET Low Profile Floor Jack with Dual Pumps Quickly Lift Hydraulic Car Jack with Pad, 4 Ton (8,800 lb) Capacity

#6

6. AUTOWN 3 Ton Floor Jack

• Load Capacity: 6600 lb
• Material: Alloy Steel, Aluminum
• Compatible with Vehicle Type: SUV Truck

Best for: Pickup and SUV service.

Why it ranks #6: The 7.1-to-20.9-inch range is described for pickups and full-size SUVs, but its 6,600-pound capacity and high minimum height limit fit.

A 7.1-inch minimum height and 20.9-inch maximum make the AUTOWN JAC-203BL’s lifting range explicit for pickups, full-size SUVs, crossovers, and vans. Its 3-ton capacity and quick-lift hydraulic system suit garage work, while the relatively high starting point is a key clearance consideration.

The 6,600-pound capacity sets the load boundary for this alloy-steel jack, and the stated 7.1-to-20.9-inch range lets buyers compare its entry height and reach with a vehicle’s frame. The listing specifically tailors that range to pickups, full-size SUVs, crossovers, and vans. Quick-lift technology supports a faster raising workflow, and a cross-shape rubber pad provides the stated contact surface. The 7.1-inch minimum can limit access when a truck’s frame sits lower.

Skip it if you need entry below 7.1 inches; the AV Steel AV-300102F has a 3-1/8-inch minimum lift height.

This AUTOWN fits owners of pickups or SUVs whose frame clearance works with its 7.1-inch starting height. Its 6,600-pound capacity and 20.9-inch maximum also need to match the load and service height required.

Listed on Amazon as: AUTOWN 3 Ton Floor Jack, Alloy Steel Hydraulic Car Jack with Quick Lift & Cross-Shape Rubber Pad, 7.1-20.9 Inch Lifting Range for SUV Truck (6600 lbs)

#7

7. AV Steel 3 Ton Low Profile

• Load Capacity: 6600 lb
• Material: Alloy Steel
• Compatible with Vehicle Type: Car

Best for: Low-clearance vehicle access.

Why it ranks #7: It lifts to 19-7/8 inches and has a 6,600-pound capacity, but its 3-1/8-inch minimum clearance favors low vehicles over lifted trucks.

A 3-1/8-inch minimum height is the AV Steel AV-300102F’s clearest advantage for reaching beneath low-clearance vehicles. The 3-ton jack also uses a dual-piston quick-lift pump and reaches 19-7/8 inches, giving buyers defined clearance and lift figures to compare with a truck’s service points.

The low starting height helps the jack approach vehicles with limited ground clearance, while its 19-7/8-inch maximum defines the available lift at the other end. A 6,600-pound capacity sets the load boundary, so truck owners need to compare that figure with their lifting requirements. The dual-piston quick-lift pump supports raising the vehicle with fewer pumping strokes than a slower pumping workflow. Alloy-steel construction suits garage use, and the listed dimensions are 29-1/8 by 13-3/4 by 5-7/8 inches.

Skip it if you need a stated capacity above 6,600 pounds; the Maxority MAX1901-35X is rated for 11,000 pounds.

Consider this jack when low entry clearance and a dual-piston pump matter for garage work. Its 6,600-pound capacity and 19-7/8-inch maximum are firm fit boundaries, so compare them with your truck’s load and required service height.

Listed on Amazon as: AV Steel Low Profile Floor Jack 3 Ton (6600 lbs), Heavy Duty Hydraulic Jack for Car, Heavy-Duty Floor Jack with Dual Pistons Quick Lift Pump, Car Floor Jack with Lifting Range 3-1/8'' to 19-7/8''

#8

8. Maxority 3-Ton Low Profile

• Load Capacity: 6600 lb
• Material: Alloy Steel
• Compatible with Vehicle Type: Car

Best for: Lowered-truck access.

Why it ranks #8: Its low-profile, long-reach design may help with access, but the 6,600-pound rating and absent listed lift-height range leave lifted-truck fit uncertain.

Extended reach paired with an ultra-low-profile design makes the Maxority 3-ton jack specifically relevant when a jack must reach beneath vehicles with limited clearance. Its 6,600-pound rating and dual-piston quick-lift pump add useful context for owners assessing capacity and lifting workflow for a modified vehicle.

The low-profile shape addresses access beneath lowered vehicles, and the extended reach is identified for cars with aftermarket modifications. Those features can help position the jack at a suitable lifting point without relying on a short-reach approach. Its 6,600-pound capacity sets the load limit, while the dual-piston quick-lift pump supports raising the vehicle with a quicker pumping workflow. The listing describes steel construction and includes a pumping handle, useful details for planning garage use and operation.

Skip it if you need a higher stated capacity; the YELLOW JACKET AS332HN is rated for 5 tons.

This Maxority suits owners of lowered vehicles who value extended reach and low-profile access for maintenance. Its 3-ton capacity remains the key boundary, so verify that the stated load rating suits the truck and the work planned.

Listed on Amazon as: Maxority 3-Ton (6600lbs) Low Profile Hydraulic Heavy-Duty Steel Floor Jack with Dual Pistons Quick Lift Pump, Home and Workshop Car Maintenance for Various Vehicles (Random Color, 3 Ton Low Profile)

#9

9. Jack Boss 3 Ton

• Load Capacity: 3 tons
• Material: Aluminum
• Compatible with Vehicle Type: Bus, Trailer

Best for: Low-profile SUV maintenance.

Why it ranks #9: The 6,600-pound rating and 18-5/16-inch maximum height suit some SUVs, but its low-profile design and shorter reach are less suited to lifted trucks.

A 3-15/16-inch minimum height lets the Jack Boss approach vehicles with limited ground clearance, while its 3-ton rating covers loads up to 6,600 pounds. Aluminum-and-steel construction and a dual-piston quick-lift pump round out its feature set for SUV and garage maintenance.

The stated range of 3-15/16 to 18-5/16 inches gives buyers concrete clearance and maximum-height figures to compare with their vehicle. Its 6,600-pound capacity sets the load limit, and the dual-piston quick-lift pump supports a faster raising workflow. The included rubber saddle and two-piece handle provide the listed contact and operating components. Aluminum-and-steel construction is specified, and the product is listed for sedans, SUVs, MPVs, station wagons, travel trailers, and minivans.

Skip it if you need a maximum height above 18-5/16 inches; the BIG RED T83006 reaches 20-7/8 inches.

A reasonable fit for SUV owners who need low-profile access and a supplied rubber saddle and handle. Its 18-5/16-inch maximum and 6,600-pound capacity are the key boundaries to compare with the truck and task.

Listed on Amazon as: Jack Boss 3 Ton Low Profile, Aluminum and Steel Racing Floor Jack with Dual Pistons Quick Lift Pump, 1.5X Overload Tested for Safety, Sport Utility Vehicle, Lifting Range 3-15/16" min to 18-5/16" max

#10

10. AV Steel 4 Ton Floor Jack

• Load Capacity: 4 tons
• Material: Alloy Steel
• Compatible with Vehicle Type: Car

Best for: Standard pickup maintenance.

Why it ranks #10: Despite its 8,000-pound rating and 19-3/4-inch maximum height, the listing explicitly says it is not recommended for lifted vehicles.

A 4-1/4-inch minimum height and 19-3/4-inch maximum make the AV Steel AV-402F’s lifting range explicit for buyers checking clearance and reach. Its 4-ton capacity covers up to 8,000 pounds, but the product specifically excludes lifted vehicles, limiting its fit for this roundup’s core use case.

The 8,000-pound rating gives this alloy-steel jack a higher stated capacity than a 3-ton model, and its dual-piston pump supports a quicker lifting workflow. The 4-1/4-inch minimum and 19-3/4-inch maximum help buyers assess whether its reach suits a standard pickup’s lifting points. However, the listing says it is not recommended for lifted vehicles, heavy commercial trucks, sports cars, or RVs. That explicit restriction makes vehicle fit especially important for truck owners.

Skip it if you own a lifted truck; the ROAD DAWG ATZ830027HD lists a 30.12-inch maximum lifting height.

A possible choice for standard pickup maintenance when its stated 4-ton capacity and lift range match the vehicle. It is not a match for lifted trucks according to its listing, so buyers in this roundup should treat that restriction as decisive.

Listed on Amazon as: AV Steel Heavy-Duty Floor Jack 4 Ton (8,000 lbs), Lift Range 4-1/4" to 19-3/4" for Cars, Vans, SUVs & Pickup Trucks, Hydraulic Steel Floor Jack with Dual Piston Pump – Not for Sports Cars or RVs