Best Drive On Ramps For Oil Change: Compare 10 Options

#1 · Best Overall

1. TOWKING Stackable Ramps

• Dimensions: 35.9"L x 12.9"W x 7.3"H
• Load Capacity: 16000 lb
• Material: Plastic

Best for: Compact-storage oil-change pair.

Why it ranks #1: Specifically described for oil changes, these ramps pair a 7.3-inch lift with a stated 16,000-pound capacity and a stackable design.

Interlocking stackable construction cuts the storage footprint by 50% compared with traditional ramps, making the TOWKING pair especially relevant for tight garages or trunk storage. It also provides a stated 7.3-inch lift and 16,000-pound capacity for oil changes, filter swaps, and underbody inspections.

The 7.3-inch lift and 17-degree incline connect directly to the intended oil-change workflow, raising the vehicle for underbody access while providing a specified approach angle. High-impact polypropylene construction is paired with an 8-ton capacity, supporting the product’s heavy-duty positioning. After use, the interlocking design reduces the storage footprint by half versus traditional ramps, a practical benefit where floor or trunk space is limited. Check that the vehicle and working surface suit the ramp before use.

Skip it if you need a per-ramp load rating stated; VEVOR Vehicle Ramp lists a 20,000-pound capacity for its single ramp.

This TOWKING pair fits garage owners who want a tall stated lift for oil changes and a smaller stored footprint. Its listing gives a pair capacity but not a per-ramp rating, a relevant detail for purchase decisions.

Listed on Amazon as: 16000lb Stackable Heavy Duty Car Ramps for Oil Change,Save 50%Space

#2 · High Pair Capacity

2. Ironton Poly Ramps

• Dimensions: 35.5"L x 12"W x 8.5"H
• Weight: 20.6 lb
• Load Capacity: 12000 lbs
• Material: Poly

Best for: Higher-capacity poly pair.

Why it ranks #2: The listed 12,000-pound GVW capacity per pair and 8.5-inch height suit buyers who want substantial stated capacity for routine service.

A 12,000-pound pair rating is the Ironton ramps’ defining feature, giving owners of cars, trucks, SUVs, and vans a higher stated capacity for routine underbody work. Each ramp is rated at 6,000 pounds, so the pair is intended for jobs such as oil changes, tire rotations, brake work, and inspections.

The 35.5-inch length and 12-inch width provide the ramp’s footprint for positioning a vehicle, while its 8.5-inch height gives a raised working position for maintenance. Poly construction keeps the 20.6-pound pair lighter than the listed steel-ramp options, which can matter when moving ramps around a garage. The stated 12,000-pound capacity applies to the pair; match that rating to the vehicle and use the ramps for the listed service tasks rather than assuming the pair rating applies to each ramp.

Skip it if you need a stated lift height before choosing; MAXXHAUL 50515 specifies a 6.25-inch lift.

Choose the Ironton pair if its 12,000-pound combined rating and poly construction suit your vehicle and garage routine. Its listed dimensions are substantial, and buyers who need a clearly specified lift height should consider that missing detail before purchase.

Listed on Amazon as: Ironton Poly Car Ramp Set, 2-Pc.

#3 · Best Stated GVW

3. ROBLOCK Heavy Duty Ramps

• Dimensions: 35.63"L x 12"W x 8.07"H
• Weight: 9.37 kg
• Load Capacity: 13000 lb
• Material: Plastic

Best for: Higher-lift ROBLOCK pair.

Why it ranks #3: These oil-change ramps list 13,000 pounds GVW capacity and a 6.1-inch lift, with stated compatibility for cars, pickups, and SUVs.

A 6.1-inch lift gives the ROBLOCK RBTS295AU a defined clearance advantage for oil changes, jack support, and other garage repairs. The pair is rated at 13,000 pounds GVW and is listed for cars, pickups, SUVs, light trucks, and light agricultural vehicles.

The 35.63-inch length and 12-inch width give these ramps a substantial footprint, while the 6.1-inch lift creates the stated working space for underbody jobs. ROBLOCK’s multi-slip design is identified in the product features, and the 13,000-pound GVW rating makes the pair relevant to a range of listed vehicle types. For raised or parked vehicle work, the supplied guidance recommends wheel chocks as an additional safety factor. Check the rating and approach suitability for the specific vehicle.

Skip it if you require a stated per-ramp capacity; MAXXHAUL 50947 lists 3,250 pounds per ramp.

Choose this ROBLOCK pair for garage oil changes when a 6.1-inch lift and broad listed vehicle range fit your needs. The GVW figure is for the set, so buyers needing individual ramp ratings should weigh that boundary.

Listed on Amazon as: ROBLOCK Heavy Duty Low Profile Car Ramps for Oil Changes, Portable Car Ramps for Low Cars High Lift and Jack Support, Vehicle Ramps for Garage, 35.63''x12''x8.07'', G.V.W 13000 LBS, 2 PCS

#4 · Tall Steel Lift

4. Garvee Steel Ramps

• Dimensions: 37"L x 13"W x 11"H
• Weight: 32.7 lb
• Load Capacity: 8000 lb
• Material: Alloy Steel

Best for: Eight-inch steel lift pair.

Why it ranks #4: Solid steel ramps provide an 8-inch lift and are explicitly intended for oil changes, though their listed total capacity is 8,000 pounds.

An 8-inch lift is the defining clearance figure for the Garvee solid-steel pair, providing room for oil changes, tire rotations, inspections, and general vehicle repair. The product lists an 8,000-pound total capacity and identifies cars, trucks, and SUVs among its intended vehicle types.

The 37-inch length and 13-inch width provide the listed footprint, while the 8-inch lift targets buyers who want more stated height for underbody access. Alloy steel construction and the solid-steel description distinguish its material from the plastic and polypropylene options in this roundup. The stated 8,000-pound capacity applies to the pair, and the feature text also gives 2,000 pounds per ramp; use those ratings to assess the specific vehicle before maintenance.

Skip it if you want a lighter portable ramp; VEVOR Vehicle Ramp weighs 6.8 pounds and has a carrying handle.

Choose Garvee if an 8-inch lift and steel construction suit your oil-change or repair routine. The pair weighs 32.7 pounds, so consider handling and storage alongside its footprint and listed load rating.

Listed on Amazon as: Garvee 8 Inch Lift Solid Steel Car Ramps, 8000 LBS, Heavy Duty Auto Truck Ramps for Oil Change and Car Repair Vehicle Service Ramps for Car Truck SUV Repair Maintenance, 2 Pack Black

#5 · Deepest Steel Lift

5. TOLGORN Steel Ramps

• Dimensions: 35"L x 12"W x 9.5"H
• Weight: 32.1 lb
• Load Capacity: 8000 lb
• Material: Iron

Best for: Steel ramps with tire-width check.

Why it ranks #5: The steel pair lists an 8,000-pound capacity and 9.5-inch height for oil changes; its 9-inch internal tire track calls for a careful fit check.

A 9-inch internal tire track is the TOLGORN ramps’ key fit detail, giving buyers a concrete width to compare with their tires before use. The solid-steel pair has an 8,000-pound total capacity, with each ramp rated at 4,000 pounds for routine garage maintenance.

The 35-inch length and 9.5-inch height describe the ramp’s overall dimensions, while the 9-inch internal track focuses the fit check on tire section width. Solid iron construction and a pair capacity of 8,000 pounds suit the listed oil-change, inspection, and general underbody service tasks. Each ramp supports up to 4,000 pounds, so evaluate both the per-ramp and pair ratings alongside vehicle clearance. The supplied product details also advise checking tire width and clearance before purchase.

Skip it if you have tires wider than the 9-inch internal track; Garvee 8 Inch Lift Solid Steel Car Ramps lists a 13-inch width.

The TOLGORN pair fits buyers whose tire width and vehicle clearance suit its 9-inch internal track and who want steel ramps for routine service. Measure tire width and check the 4,000-pound per-ramp limit before choosing.

Listed on Amazon as: Heavy Duty Car Ramps for Oil Changes, 2 Pack Solid Steel Vehicle Ramps, 8,000 LBS Capacity Per Pair, 35" x 12" x 9.5", Auto Service Ramps, 9" Tire Track Width, Traction Hole Surface, Blue

#6

6. ROBLOCK Low-Profile Ramps

• Dimensions: 17.5"L x 10"W x 3.14"H
• Weight: 5.3 lb
• Load Capacity: 5 ton
• Material: Plastic

Best for: Low-chassis and jack access.

Why it ranks #6: A 2.6-inch tire-placement lift and 10-inch width target low-chassis cars, while the listing states a 5-ton capacity.

A 2.6-inch tire-position lift makes these ROBLOCK ramps a low-profile option for low-chassis cars that need a modest rise. Their 17.5-inch length and 10-inch width are specified to leave more room for jack work and reduce tire overhang on modified vehicles with wider tires.

ROBLOK states that the shorter length keeps the jack’s working area less restricted, allowing tools to be placed beneath the chassis while the vehicle is raised. The 10-inch width is intended to address overhang from wider modified tires, and the 2.6-inch tire-position height suits vehicles where a taller approach may not work. The pair is listed at 5 ton capacity and weighs 5.3 pounds; check the vehicle’s approach angle and use wheel chocks as the supplied guidance recommends.

Skip it if you need more than 2.6 inches of lift; ROBLOCK Heavy Duty Low Profile Car Ramps specifies a 6.1-inch lift.

Choose these ROBLOCK ramps for low-chassis vehicles when jack access, wider tire support, and a modest lift are priorities. Their 2.6-inch height limits clearance, so they are not the choice for buyers seeking a taller working position.

Listed on Amazon as: ROBLOCK Car Ramps for Lift and Vehicle Maintenance, Portable Low Profile Car Ramps for Garage, Heavy Duty Tire Ramps with 2.6" Lift Height for Low Chassis Cars and Support Jack, 17.5"x10"x3.14", 2 PCS

#7

7. MAXXHAUL 50515 Ramps

• Dimensions: 35.5"L x 12"W x 8.25"H
• Weight: 20.1 lb
• Load Capacity: 3,250 lbs per ramp; 6,500 lbs per pair
• Material: Plastic

Best for: Defined 6.25-inch lift.

Why it ranks #7: These plastic ramps offer a 6.25-inch lift, 6,500-pound pair capacity, grooved tire surface, and base rubber stops.

A specified 6.25-inch lift gives the MAXXHAUL 50515 a clear clearance figure for owners planning routine underside access. Its pair capacity is 6,500 pounds, with 3,250 pounds per ramp, and the ridged surface and rubber base stops address tire traction and ramp movement during vehicle maintenance.

At 35.5 inches long and 12 inches wide, these plastic ramps have a broad footprint for positioning tires, while the 6.25-inch lift provides the stated height for underside work. Deep grooves add traction at the tire contact surface, and rubber stops on the base are intended to help prevent slipping as the vehicle climbs. The 6,500-pound rating is for the pair, so check it against the vehicle’s requirements before using the ramps for repairs or maintenance.

Skip it if you need a pair rating above 6,500 pounds; Ironton Poly Car Ramp Set is rated for 12,000 pounds.

The 50515 suits owners who want a stated 6.25-inch lift, grooved tire contact, and base stops for garage maintenance. Keep its 6,500-pound pair limit in view when deciding whether it matches your vehicle.

Listed on Amazon as: MaxxHaul 50515 6.25" Lift Car Ramps, 2-Pack – 6, 500lb GVW, Deep Grooved Surface for Stable Tire Placement, Heavy-Duty, Black

#8

8. MAXXHAUL 50947 Ramps

• Dimensions: 35.63"L x 12"W x 8.25"H
• Weight: 18.9 lb
• Load Capacity: 3,250 lbs per ramp; 6,500 lbs per pair lb
• Material: Plastic

Best for: Stackable polypropylene pair.

Why it ranks #8: The stackable polypropylene pair lists 6,500 pounds capacity and measures 35.63 by 12 inches, but is less specifically described for oil changes.

A patented stackable design gives the MAXXHAUL 50947 a storage-focused edge while retaining a stated 6,500-pound pair capacity. Each ramp supports 3,250 pounds, and the 35.63-inch length and 12-inch width provide the listed dimensions for positioning vehicles during routine maintenance.

Stackability helps organize the ramps between jobs, while rugged polypropylene construction is specified for repeated heavy-duty use. Each ramp measures 35.63 inches long and 12 inches wide, with an 8.25-inch listed height; those dimensions give buyers concrete information for garage storage and vehicle approach planning. The load limit is 3,250 pounds per ramp and 6,500 pounds per pair, so use the relevant rating when assessing a vehicle. This is a practical option when a stackable pair matters more than a higher combined capacity.

Skip it if you need a pair rating above 6,500 pounds; ROBLOCK Heavy Duty Low Profile Car Ramps lists 13,000 pounds.

The MAXXHAUL 50947 suits garage users who value stackable storage and a clearly stated per-ramp rating for maintenance work. Its 6,500-pound pair limit is the key boundary when matching it to a vehicle.

Listed on Amazon as: MaxxHaul 50947 Lift Stackable Vehicle Car Ramp 6500 LBS Capacity Per Pair 3250 LBS Per Ramp 2 Pack

#9

9. VEVOR Tandem Ramp

• Dimensions: 24"L x 8.5"W x 7.1"H
• Weight: 6.8 lb
• Load Capacity: 20000 lb
• Material: Polypropylene (PP)

Best for: Single tandem-wheel service ramp.

Why it ranks #9: This single polypropylene ramp is rated for 20,000 pounds and lifts 5.5 inches, but its tandem-wheel format is less suited to a typical paired setup.

A 20,000-pound capacity in one portable ramp distinguishes the VEVOR TS924 for tandem-wheel vehicles, including trucks and RVs. Its 5.5-inch lift creates space for inspections and repairs, while the integrated handle supports moving the 6.8-pound ramp between service locations.

The 24-inch length and 8.5-inch width make this a single-ramp format rather than a two-piece pair, and its handle supports portability without installation: place it on a flat road and slowly drive the tires onto it, according to the supplied instructions. A 5.5-inch rise provides the stated clearance for maintenance, while polypropylene construction keeps the listed weight at 6.8 pounds. The product is presented for tandem-wheel vehicles, so consider that use case and the single-ramp configuration when planning service.

Skip it if you need a matched two-ramp set; Florety Heavy Duty Car Ramps is listed as a 2-pack.

Choose the VEVOR TS924 if a portable single ramp, tandem-wheel compatibility, and a 5.5-inch lift fit your service setup. Buyers needing a matched pair should account for its one-piece configuration before purchase.

Listed on Amazon as: VEVOR 1Piece Vehicle Ramp 20000 lbs/9 Ton Capacity Car Service Ramp, Effortlessly Lift 5.5" High, Durable Nonslip & Portable, for Routine Tire Replacement Repairs, Work with Tandem Wheel Vehicles

#10

10. Florety Tandem Ramps

• Dimensions: 7.3"L x 6.14"W x 8.03"H
• Load Capacity: 20000 lb
• Material: Polyethylene (PE)

Best for: Tandem-wheel maintenance pair.

Why it ranks #10: The listing describes oil-change use and a 5.5-inch lift, but conflicting dimensional information and a 20,000-pound rating make fit harder to assess.

A 20,000-pound capacity and compatibility with tandem-wheel vehicles make the Florety pair relevant to owners of trucks, SUVs, RVs, campers, and trailers. Its stated 5.5-inch lift supports maintenance access, while the product also identifies jack placement for repairs and inspections as a use.

The 5.5-inch lift provides the listed clearance for routine work, and the ramps are presented for jack placement during repairs, inspections, and part replacement. Their PP material is described as resistant to sun, rain, and extreme temperatures without deformation or cracking, supporting outdoor storage or use as stated. The listing gives a 20,000-pound capacity and a 2-pack configuration. Confirm that the vehicle’s tire and approach needs suit the ramps, particularly for tandem-wheel applications.

Skip it if you need a clearly consistent ramp length; VEVOR Vehicle Ramp lists dimensions of 24 by 8.5 inches.

The Florety pair suits buyers with tandem-wheel vehicles who want 5.5 inches of lift and weather-resistant material for maintenance. Its listed dimensions conflict with the title, so resolve that specification before planning storage or placement.

Listed on Amazon as: Heavy Duty Car Ramps 2 Pack,RV Wheel Ramp 20,000lbs Capacity,5.5" Lift Non-Slip Portable Vehicle Service Ramps, Oil Change Tire Repair Ramps for Trucks, SUVs, RVs, Campers,Tandem Axle Trailers