Best Electric Jack For Gooseneck Trailer: Compare 10 Options

#1 · Best Overall

1. Johnson Trailer Parts Dexter Kit

• Load Capacity: 24,000 lb
• Compatible with Vehicle Type: Trailer
• Material: Steel

Best for: High-capacity hydraulic goosenecks.

Why it ranks #1: Explicitly serves gooseneck trailers and combines two 12,000-pound hydraulic jacks, a 24,000-pound total capacity, and synchronized double-acting operation.

Two 12,000-pound hydraulic jacks combine for 24,000 pounds of lifting capacity, giving heavy dump, cargo, and gooseneck trailers a push-button alternative to separate manual cranking. The KTI double-acting pump powers both raising and lowering, while a flow divider distributes fluid evenly between the jacks.

The kit pairs two 2-by-20-inch hydraulic cylinders with a KTI power unit rated at 2 GPM and up to 3,200 PSI. Double-acting operation enables powered raising and lowering, while the flow divider supports synchronized movement across both jacks. Six 48-inch hydraulic hoses, jack covers, and the pump are included, providing key hydraulic components together. This is a substantial hydraulic installation rather than a single-jack conversion, so it suits trailers needing dual-jack lifting.

Skip it if you need a bolt-on conversion for one existing Bulldog square jack; Charouse's 12,000-pound kit targets that setup.

Choose this kit for a heavy gooseneck, dump, or cargo trailer that needs synchronized dual-jack hydraulic lifting and powered lowering. Its two-jack layout and hydraulic hoses make it a larger installation than a single-jack powered-drive conversion.

Listed on Amazon as: Dexter 24,000 lb Hydraulic Trailer Jack Kit – Dual 12,000 lb Power Jacks – KTI Double Acting Pump – Electric Hydraulic – for Dump, Cargo & Gooseneck Trailers

#2 · Gooseneck Conversion

2. Charouse 12,000 lb Conversion Kit

• Load Capacity: 12000 lbs
• Compatible with Vehicle Type: RV

Best for: Bulldog single-jack conversion.

Why it ranks #2: Its description explicitly names goosenecks and horse trailers, with 12,000-pound powered lifting and direct compatibility claims for Bulldog part numbers.

A pre-wired switch box turns a compatible Bulldog single-speed square manual jack into a 12V powered jack, replacing routine hand cranking with motorized operation. The kit is rated for lifting up to 12,000 pounds and lists direct compatibility with OEM number 1824200100.

This conversion is intended for Bulldog single-speed square jacks, rather than being a complete standalone jack. Its 12V motor and pre-wired switch box let an owner operate the existing jack electrically, while the stated 12,000-pound capacity serves heavy RVs, goosenecks, and horse trailers. The direct OEM-number compatibility helps identify the intended replacement, and the bolt-on format focuses the purchase on upgrading an existing jack instead of replacing the whole assembly.

Skip it if you have a twin-cam jack or want a complete A-frame tongue jack; POLESTAR's 5,000-pound A-frame unit is a standalone jack.

This is for owners of a matching Bulldog single-speed square jack who want electric operation without replacing the entire jack. Check that the existing jack matches the stated type and OEM reference before choosing this conversion kit.

Listed on Amazon as: 12,000 lbs Electric Trailer Jack Kit Made for Bulldog Jacks 1824200100

#3 · Bulldog-Compatible Pick

3. Bulldog 1824200100 Powered Kit

• Load Capacity: 7.5E+3 lb
• Compatible with Vehicle Type: All-Terrain vehicules
• Material: High Carbon Steel

Best for: Bulldog horse-trailer upgrade.

Why it ranks #3: A purpose-made conversion for single-speed square Bulldog jacks, with a limited five-year warranty; its listed capacity is 7,500 pounds despite 12K jack references.

A complete motor-and-hardware conversion kit adds push-button operation to a compatible Bulldog manually cranked jack, a practical change for horse-trailer owners who regularly raise and lower their trailer. The product is specifically limited to single-speed square Bulldog jacks and lists a 7,500-pound capacity.

Rather than supplying a full replacement jack, this kit converts an existing compatible Bulldog unit, using the included motor and hardware for electric operation. That format keeps the upgrade focused on the jack already installed, which matters to owners seeking to move beyond manual cranking. Its single-speed square Bulldog restriction is central to fit, and the listed 7,500-pound capacity is a separate consideration when deciding whether it suits the trailer's jack requirements.

Skip it if you need a standalone A-frame jack; KYX's 7,500-pound electric tongue jack supplies a complete jack rather than a conversion.

This suits a horse-trailer owner with the specified Bulldog single-speed square jack who wants powered operation using a conversion kit. Its listed capacity and narrow jack compatibility should guide the decision before purchase.

Listed on Amazon as: Bulldog 1824200100 Electric Powered Kit, 7500 lbs Capacity, Only Compatible with Single-Speed Square Bulldog Jacks

#4 · Manual Backup

4. GELUOXI Powered-Drive Kit

Best for: Manual-backup powered conversion.

Why it ranks #4: Designed for 12,000-pound and Twin Cam jacks, it supports single or tandem applications and can be manually cranked if power is lost.

Manual cranking remains available if electrical power is lost, giving this 12,000-pound powered-drive kit a fallback when the motor cannot be used. It is intended for single-speed and Twin Cam jacks, lifts three inches per minute at typical working loads, and supports single or tandem jack applications.

The stated three-inch-per-minute lift rate at typical working loads gives buyers a practical sense of powered movement, while manual cranking provides a way to operate the jack during a power loss. Its specified compatibility with 12,000-pound and Twin Cam jacks, plus use in single or tandem applications, broadens the configurations it can serve. The OE number 1824200100 also helps identify the intended powered-drive replacement when matching an existing setup.

Skip it if you need a complete A-frame jack rather than a conversion; KYX's 7,500-pound electric tongue jack is a standalone option.

Consider this kit when converting a compatible single-speed or Twin Cam jack and keeping manual operation available matters. Its listed fit centers on specified jack types, so it is not the choice for replacing an entire tongue-jack assembly.

Listed on Amazon as: Electric Powered-Drive Trailer Jack Kit for Single Speed Jacks 12,000 lbs

#5

5. labwork 12,000 lb Jack Kit

• Load Capacity: 1.2E+4 lb
• Compatible with Vehicle Type: Trailer
• Material: Alloy Steel

Best for: Bulldog tandem-jack conversion.

Why it ranks #5: This 12,000-pound conversion is specifically described for single-speed Bulldog jacks and supports tandem applications, making it relevant if the existing jack matches.

A manual-crank fallback keeps this 12,000-pound electric conversion usable when power is lost, while its stated tandem-application support accommodates more than a single-jack arrangement. It is specifically intended for 12,000-pound single-speed Bulldog jacks and lifts three inches per minute at typical working loads.

This kit converts a specified Bulldog single-speed jack rather than supplying a complete trailer jack. Its three-inch-per-minute typical-load rate describes powered movement, and the manual crank gives an alternate operating method during power loss. Tandem application support broadens its possible layout, while the supplied replacement bevel gear and dowel pin add identified service components. OEM references including 1824200100 and BD1046130-00 help distinguish the intended replacement family.

Skip it if you want a complete A-frame jack rather than a Bulldog conversion; KYX's 7,500-pound tongue jack is a standalone alternative.

This is a fit for owners upgrading a compatible 12,000-pound single-speed Bulldog jack, especially where tandem use or a manual fallback matters. Confirm the existing jack type against the stated application before selecting the conversion.

Listed on Amazon as: labwork 1824200100 Electric Powered Trailer Jack Kit 12000 lbs

#6

6. Misakomo 12,000 lb Drive Kit

• Load Capacity: 1.2E+4 lb
• Compatible with Vehicle Type: Trailer

Best for: 12,000-pound jack conversions.

Why it ranks #6: A powered-drive conversion with listed compatibility numbers and support for single or tandem jack applications, though gooseneck-specific fit is not stated.

Compatibility with several listed replacement numbers—including 1824200100 and BD1046130-00—gives this 12,000-pound powered-drive kit useful identifiers for matching an existing jack. The kit supports both single and tandem applications, making it relevant to owners converting one jack or a paired arrangement.

The kit is described as an electric powered trailer-drive conversion, so it upgrades a compatible existing jack rather than serving as a complete replacement assembly. Its 12,000-pound lifting capacity is paired with listed replacement references, helping owners compare the conversion with the part number on their current setup. Support for both single and tandem jack applications offers layout flexibility. The stated power-drive dimensions—8 by 3 9/16 by 6 3/16 inches—also help assess available installation space.

Skip it if you need a stated three-inch-per-minute lift rate; GELUOXI lists that figure for its powered-drive kit at typical working loads.

This suits owners matching a powered-drive conversion to one of the listed replacement numbers and using a single or tandem arrangement. Check the stated drive dimensions against available space, since this is not a complete jack.

Listed on Amazon as: 1824200100 Electric Powered Trailer Jack Kit – 12,000 lbs, 12V, Heavy-Duty Powered Drive Kit with Single Speed Jacks and Control Switch – Weather-Resistant for RVs, Campers, and Trailers

#7

7. Woosphy 12,000 lb Drive Kit

Best for: Tandem-jack conversion buyers.

Why it ranks #7: Its 1824200100 powered-drive kit is intended for single-speed and Twin Cam jacks, with a manual-crank fallback if electrical power fails.

The ability to operate manually during a power loss gives this 12,000-pound powered-drive conversion a fallback beyond its electric function. It is listed for single-speed and Twin Cam jacks, lifts three inches per minute at typical working loads, and can be used in single or tandem jack applications.

The three-inch-per-minute rate at typical working loads helps set expectations for lift speed, while manual cranking preserves a way to move the jack if power is unavailable. Compatibility information names single-speed and Twin Cam jacks, and tandem application support makes the kit relevant to multi-jack arrangements as well as single-jack setups. The listed OEM reference, 1824200100, provides a concrete identifier for checking whether this powered-drive conversion matches an existing jack.

Skip it if you need a complete tongue jack instead of a powered-drive conversion; POLESTAR's 5,000-pound A-frame jack is a standalone unit.

Choose this conversion if your existing single-speed or Twin Cam jack matches the listed application and you value a manual fallback. It does not replace the jack itself, so compatibility with the installed unit remains essential.

Listed on Amazon as: 1824200100 Electric Powered Trailer Jack Kit 12000 lbs 12V

#8

8. FHRHRY Single-Speed Drive Kit

• Load Capacity: 7500 lb
• Compatible with Vehicle Type: RV, Trailer
• Material: Aluminum

Best for: Compact Bulldog drive conversions.

Why it ranks #8: The 12-volt drive is specified for a jack rated at 12,000 pounds, but the kit itself lists 7,500 pounds and does not name goosenecks.

A compact form for tight applications makes this 12V powered-drive kit relevant where space around an existing jack is limited. It lifts three inches per minute at typical working loads and is specified as a drive kit for compatible Bulldog single-speed jacks, with a 7,500-pound listed capacity.

The kit fits a jack with a stated 12,000-pound capacity, while the powered drive itself lists a 7,500-pound lift capacity; those figures describe different aspects of the product and merit attention when matching a setup. Its 12V DC motor and three-inch-per-minute typical-load rate explain the powered operation. The compact description targets tight installations, and the included component is a powered-drive kit rather than a complete jack assembly.

Skip it if you need a complete A-frame tongue jack rather than a conversion; POLESTAR's 5,000-pound electric A-frame jack is a standalone unit.

Consider this for a compatible Bulldog single-speed setup where compact installation and 12V powered operation matter. The drive's 7,500-pound rating differs from the 12,000-pound jack capacity it fits, so weigh that distinction carefully.

Listed on Amazon as: 1824200100 RV Single Speed Powered Drive Kit Compatible with Bulldog Electric Single-Speed Jacks, One Speed Electric Drive Jack Kit for Camper and Heavy Duty Trailers, Replace# BD1824200100, 12V

#9

9. KYX 7,500 lb A-Frame Jack

• Load Capacity: 7500 LB
• Compatible with Vehicle Type: RV, Trailer
• Material: Carbon Steel

Best for: A-frame tongue jack owners.

Why it ranks #9: This complete 7,500-pound electric jack suits RVs and trailers, but its A-frame tongue-jack format is a weaker match for a gooseneck.

A 12V DC motor raises or lowers an A-frame trailer with a listed 7,500-pound capacity, replacing manual operation with electric movement in a complete tongue jack. Its carbon-steel construction has an anti-rust coating, a relevant detail for outdoor trailer use and exposure to water splashes.

This is a complete electric trailer jack rather than a conversion kit, so it is suited to replacing an A-frame tongue jack assembly. The 12V DC motor supplies powered raising and lowering, while the 7,500-pound rating sets the stated capacity for matching the trailer. Carbon steel with an anti-rust surface coating is specified to resist harsh outdoor conditions and water splashes. The listing identifies RVs and trailers as compatible vehicle types.

Skip it if you need a stated manual fallback for power loss; GELUOXI's conversion kit can be manually cranked when power is unavailable.

This suits an RV or trailer owner replacing an A-frame tongue jack who wants 12V electric lifting and coated carbon-steel construction. Match the stated 7,500-pound capacity to the application before choosing it for a gooseneck.

Listed on Amazon as: KYX Electric Trailer Jack 7500LBs,Electric Jack with Waterproof Cover

#10

10. POLESTAR 5,000 lb A-Frame Jack

• Load Capacity: 5000 lb
• Compatible with Vehicle Type: RV, Trailer, Truck
• Material: Alloy Steel

Best for: A-frame RV tongue lifting.

Why it ranks #10: It is an A-frame electric tongue jack with 5,000-pound dynamic and 7,500-pound static capacity, not a gooseneck-specific lifting system.

A 5,000-pound dynamic rating and 7,500-pound static lifting capacity give this electric A-frame tongue jack distinct working and static figures for trailer setup. It includes a crank and waterproof cover, combining powered operation with a manual component and a cover for storage or exposure between uses.

This is a complete electric tongue jack, not a powered-drive conversion, and its A-frame format suits buyers replacing that style of jack. The 5,000-pound dynamic capacity and 7,500-pound static lifting figure should be considered separately when matching the jack to a trailer. A supplied crank provides a manual component, while the waterproof cover is included for the jack. Its stated vehicle compatibility includes RVs, trailers, and trucks.

Skip it if you need a 12,000-pound powered-drive conversion for an existing Bulldog jack; labwork's kit is specified for that jack type.

Pick this for an RV or trailer needing a complete electric A-frame tongue jack, with a crank and waterproof cover included. Its 5,000-pound dynamic rating makes capacity matching important for heavier gooseneck setups.

Listed on Amazon as: POLESTAR Electric Trailer Jack, 5000lbs Electric Power A-Frame Tongue Jack