Best Landing Gear For Trailers: Compare 10 Options

#1 · Best Overall

1. Mytee Products Landing Gear Set

• Load Capacity: 1.6E+5 lbs
• Material: Cast Iron, Steel, or Aluminum
• Compatible with Vehicle Type: Trailer

Best for: Heavy-duty semi-trailer setups.

Why it ranks #1: Its 62,000-pound lift and 160,000-pound static capacities suit heavy trailer support, while the listing specifies an external gearbox and outside mounting.

A two-speed external gearbox pairs a 62,000-pound lift rating with a 160,000-pound static capacity, giving heavy trailer operators distinct gearing for raising and lowering. Mytee Products lists a 0.72 mm-per-turn low speed and 5.42 mm-per-turn high speed, plus an outside-mount FUWA-type gearbox for this landing-gear set.

The two gear speeds let operators choose between slower 0.72 mm-per-turn movement and faster 5.42 mm-per-turn travel, while the listed 4.29-foot extended and 1.57-foot retracted lengths describe its operating range. Its 62,000-pound lift capacity and 160,000-pound static rating distinguish lifting from supported-load capacity. The 59-3/4-inch shaft and outside-mount FUWA-type gearbox are useful reference points when matching the assembly to a trailer installation; the supplied facts specify single-side installation.

Skip it if you need a fifth-wheel RV replacement leg rather than a two-speed trailer gear set; FHRHRY 179013 is listed for that role.

Choose this Mytee set for heavy trailer applications where its two-speed gearbox, specified shaft, and substantial lift and static ratings match the installation. Check the listed outside-mount arrangement and travel lengths against the trailer before selecting it.

Listed on Amazon as: Mytee Products Landing Gear Trailer Jack Set 62,000 lbs Lift 160,000 lbs Static Load 2 Speed External Gear Box

#2 · Complete Set

2. PartStop LG4001 Landing Gear Set

Best for: Complete semi-trailer gear set.

Why it ranks #2: This two-leg set includes a cross drive shaft, crank handle, hanger, and brace ears, with listed 55,000-pound lift and 170,000-pound static capacities.

This PART STOP 17-inch landing-gear set includes two legs, a cross drive shaft, crank handle, crank hanger, and brace ears, giving buyers a specified component group rather than a leg alone. Its listed ratings are 55,000 pounds lifting capacity and 170,000 pounds static load capacity for semi-trailer use.

The included cross drive shaft connects the two supplied legs, while the crank handle and crank hanger support a manual operating setup. Two brace ears are also listed, helping buyers assess the components supplied for installation. The set is rated for 55,000 pounds of lifting and 170,000 pounds of static load, which are distinct figures for movement and stationary support. Ductile iron gears and treated components are identified in the supplied features; the 17-inch set specification helps frame replacement planning.

Skip it if you need a powered fifth-wheel system with a waterproof switch; Ultra-Fab 17943010 lists independent 12-volt motors and push-button control.

This set fits semi-trailer buyers seeking two legs and the listed drive and crank hardware in one assembly. Its 205-pound item weight is a meaningful handling consideration during installation, alongside checking the specified replacement references for the existing gear.

Listed on Amazon as: LG4001-700000078 Trailer Landing Gear Flat Foot Set (RH and LH) Semi Truck

#3 · Electric Fifth-Wheel

3. Stromberg Carlson Electric Landing Gear

• Material: Aluminum

Best for: Electric fifth-wheel lifting.

Why it ranks #3: Its electric fifth-wheel system has 29.5-inch legs, an IP-rated switch, and a stated 5,000-pound capacity for buyers wanting powered operation.

An 80 RPM electric motor and 29.5-inch legs give this Stromberg Carlson fifth-wheel system defined operating and dimensional specifications. Its listing states a 5,000-pound capacity and weld-on steel construction, while an IP-rated switch is identified among the features for operating the landing gear during RV setup.

The 80 RPM motor provides the specified drive speed for raising the fifth wheel, and the IP-rated switch supplies the listed control point for operation. With 29.5-inch legs and a 5,000-pound capacity, buyers can assess its dimensions and stated lifting rating for their setup. Weld-on construction is suited to an installation planned around welding rather than the bolt-on approach. The product is listed for fifth-wheel campers, utility trailers, and RV leveling applications, so its mounting method remains an important fit consideration.

Skip it if you need a bolt-on swivel jack for a trailer tongue; VEVOR TJB-2002S-WK-Z is listed with bolt-on mounting and a crank handle.

Choose this Stromberg Carlson system when its electric motor, 29.5-inch legs, and weld-on installation suit a fifth-wheel or listed trailer application. The mounting method is the key boundary; it is not the listed bolt-on swivel style.

Listed on Amazon as: Stromberg Carlson Electric 5th Wheel Landing Gear with 5,000 lb Capacity, Weld-On Steel Construction, IP Rated Switch, Trailer Jack Stand, RV Jacks & Stabilizers – 80 RPM, 29.5” Legs, Black

#4 · Independent Motors

4. Ultra-Fab Electric Landing Gear

Best for: Electric fifth-wheel setup.

Why it ranks #4: Two independent 12-volt motors and a waterproof switch simplify fifth-wheel positioning; the listing states a 12,000-pound total lifting capacity.

Independent 12-volt motors and a waterproof push-button switch let this Ultra-Fab system raise and lower a fifth wheel without hand cranking. Its foot pads can be positioned independently, a practical feature for uneven surfaces, while the stated capacity is 12,000 pounds total, or 6,000 pounds per leg.

The two independent 12-volt motors operate from a waterproof switch, replacing the hand-cranking workflow with push-button raising and lowering. Independent foot-pad positioning helps place both pads firmly on uneven ground, supporting leveling and stabilization during setup. Ultra-Fab lists a 12,000-pound total capacity, specified as 6,000 pounds per leg. That combination fits fifth-wheel owners seeking powered front-end setup, though the supplied specifications identify a 12-volt system and do not state a separate manual operating method.

Skip it if you need a manual crank jack for a utility trailer tongue; VEVOR TJB-2002S-WK-Z is listed with a crank handle.

Fifth-wheel owners seeking powered raising and independent foot-pad placement will value this system, especially on uneven setup surfaces. Its listed 12-volt operation is the key boundary: choose it when that power arrangement fits your RV workflow.

Listed on Amazon as: Ultra-Fab Products 17943010 5th Wheel Electric Landing Gear

#5

5. FHRHRY Lead Landing Gear Leg

• Load Capacity: 4000 lb
• Material: Steel
• Compatible with Vehicle Type: RV

Best for: Fifth-wheel lead-leg replacement.

Why it ranks #5: This 29-1/2-inch replacement lead leg includes a drop leg and cage pin and is listed as compatible with Lippert, Venture, Atwood, and Stromberg Carlson systems.

Compatibility with Lippert, Venture, Atwood, and specified Stromberg Carlson systems makes this FHRHRY lead leg a targeted fifth-wheel replacement. It is listed as a 29-1/2-inch universal-mount leg, with a drop leg and cage pin included, so buyers can assess both system compatibility and included hardware before planning the repair.

This is a single lead landing-gear leg, not a complete pair: the included component is one leg with its drop leg and cage pin. Its stated compatibility covers Lippert, Venture, and Atwood systems, as well as Stromberg Carlson LG-1, LG-3, and LG-183708 sets. The 29-1/2-inch listing and 4,000-pound load capacity provide useful replacement specifications, while its steel construction identifies the material. It is intended for fifth-wheel RVs with universal-mount landing gear.

Skip it if you need electric push-button operation for the complete fifth wheel; Ultra-Fab 17943010 is listed with independent 12-volt motors.

This leg suits an owner replacing the lead side of a compatible universal-mount fifth-wheel landing-gear system. It is not a complete set, so make sure the repair calls for a lead leg and that the listed system compatibility matches your RV.

Listed on Amazon as: 179013, RV Lead Fifth Wheel Landing Gear Leg Compatible with Lippert Venture, Universal 29-1/2" Landing Gear Jack for Atwood & Stromberg Carlson Landing Gear Systems | with Drop Leg and Cage Pin

#6

6. FHRHRY Follow Landing Gear Leg

• Load Capacity: 4000 lb
• Material: Steel
• Compatible with Vehicle Type: RV

Best for: Fifth-wheel follow-leg replacement.

Why it ranks #6: Designed as a replacement follow leg, it includes a drop leg and cage pin and lists compatibility with several Lippert, Venture, Atwood, and Stromberg Carlson systems.

A follow-leg configuration with a drop leg and cage pin makes the FHRHRY 179014 a specific replacement choice for compatible fifth-wheel landing gear. The listing names Lippert, Venture, and Atwood systems, plus Stromberg Carlson LG-1, LG-3, and LG-183708 sets, and states a 4,000-pound load capacity.

This product is a single follow landing-gear leg for universal-mount fifth-wheel RV systems, with one leg, drop leg, and cage pin listed as included. Its named fitments cover Lippert, Venture, and Atwood, alongside Stromberg Carlson LG-1, LG-3, and LG-183708 sets. The steel material and 4,000-pound capacity provide additional replacement specifications. Because this is the follow leg rather than a complete assembly, buyers can use its role to distinguish it from the matching lead-side replacement.

Skip it if you are replacing the lead side rather than the follow side; FHRHRY 179013 is the listed lead-leg counterpart.

Select this FHRHRY leg when the repair calls for a follow-side replacement on a compatible universal-mount fifth wheel. It is supplied as one leg, so its role and the listed system compatibility should align with the component being replaced.

Listed on Amazon as: 179014, RV Follow Fifth Wheel Landing Gear Leg Compatible with Lippert Venture, Universal 29-1/2" Landing Gear Jack for Atwood & Stromberg Carlson Landing Gear Systems | with Drop Leg and Cage Pin

#7

7. FEXON Lead Landing Gear

• Load Capacity: 5E+3 lb
• Material: Steel
• Compatible with Vehicle Type: Trailer

Best for: Fifth-wheel lead-leg replacement.

Why it ranks #7: This 29.5-inch lead-leg replacement lists a 5,000-pound capacity and compatibility with Lippert Venture and Atwood fifth-wheel systems.

A 29.5-inch lead-leg specification and named compatibility with Lippert, Venture, and Atwood systems make this FEXON part a targeted fifth-wheel replacement option. Its listing gives a 5,000-pound load capacity, steel construction, and housing as an included component, useful details for planning a leg replacement.

The lead-leg designation and 29.5-inch measurement help identify the replacement role and listed length for a fifth-wheel setup. FEXON names Lippert, Venture, and Atwood compatibility, while the 5,000-pound load capacity and steel material provide additional specifications for assessing the part. Housing is listed as included, which is relevant when planning the replacement components. The supplied facts do not identify a drop leg or cage pin, so this listing is best evaluated by its stated fitments and included housing.

Skip it if you need a lead leg explicitly listing a drop leg and cage pin; FHRHRY 179013 includes both and names compatible systems.

This FEXON part suits fifth-wheel owners replacing a compatible lead leg who need the listed 29.5-inch specification and included housing. Check that its named system fitment matches the RV, since the supplied details describe a specific replacement role.

Listed on Amazon as: RV Lead Fifth Wheel Landing Gear for Lippert Venture & Atwood 29.5" 179013

#8

8. FRGOLIN Fifth-Wheel Landing Gear

• Load Capacity: 1E+4 lb
• Material: Alloy Steel
• Compatible with Vehicle Type: RV

Best for: RV lead-and-follow leg set.

Why it ranks #8: The listing identifies RV lead and follow landing gear legs and a 10,000-pound load capacity, but provides less specific fitment detail than several competing replacement legs.

A listed 10,000-pound capacity and alloy-steel construction make this FRGOLIN fifth-wheel landing-gear leg option relevant to RV owners replacing lead and follow components. The product title covers both 179013 lead and 179014 follow applications, and the specifications say housing comes with the included components.

The title identifies both lead and follow fifth-wheel landing-gear leg applications, allowing buyers to consider it for either side of an RV replacement. Its stated 10,000-pound load capacity and alloy-steel material are the principal specifications for evaluating the part. Housing is listed among the included components, a practical detail for a replacement workflow. The supplied information does not clarify whether the package contains both lead and follow legs, so confirm the exact configuration from the listing before ordering.

Skip it if you need a clearly specified single lead leg compatible with named systems; FHRHRY 179013 lists those fitments and its included drop leg.

Consider this FRGOLIN option when replacing fifth-wheel landing-gear legs and its listed 10,000-pound capacity and alloy-steel construction suit the application. Package configuration is the important boundary, since the supplied details do not establish whether both leg types come together.

Listed on Amazon as: 179013 179014 RV Lead Fifth Wheel & RV Follow Fifth Wheel Landing Gear Leg

#9 · A-Frame Option

9. VEVOR A-Frame Trailer Jack

• Load Capacity: 5000 lb
• Material: Carbon Steel
• Compatible with Vehicle Type: Trailer

Best for: High-capacity trailer tongue support.

Why it ranks #9: Its 5,000-pound capacity, 15-inch vertical travel, adjustable drop leg, and bolt-on or weld-on mounting suit A-frame tongue-jack applications.

A 5,000-pound capacity and 9.65-to-24.64-inch lifting range give this VEVOR A-frame jack a broad stated height span for horse, utility, and yacht trailers. Its adjustable drop leg adds another height-setting element, while the listing says the jack can be bolted or welded to the trailer tongue.

The stated 9.65-to-24.64-inch lifting range supports a range of trailer tongue heights, and the adjustable drop leg gives buyers an additional way to set the jack. A 5,000-pound lifting capacity is the listed load figure. Installation can be bolted or welded, and the swivel function supports repositioning when the jack is not in use. Carbon steel construction and the included crank handle make this a manual tongue-jack option for the trailer types named in the listing.

Skip it if you want a bolt-on jack explicitly listing 15.04-to-30-inch travel; VEVOR TJB-2002S-WK-Z lists that range.

Choose this VEVOR jack for a trailer tongue needing the listed 5,000-pound capacity, adjustable drop leg, and bolt-or-weld mounting options. Its stated lifting range is the relevant height boundary; compare it with the tongue height required for your setup.

Listed on Amazon as: VEVOR 5000 lbs A-Frame Trailer Jack, 15" Vertical Travel, Adjustable Drop Leg, for Horse, Utility, Yacht Trailers

#10

10. VEVOR Swivel Trailer Jack

• Load Capacity: 2500 lb
• Material: Carbon Steel
• Compatible with Vehicle Type: Trailer

Best for: Bolt-on manual trailer jack.

Why it ranks #10: This bolt-on swivel jack has a 2,500-pound capacity and 15-inch vertical travel, making it a tongue-jack option rather than a landing gear set.

A 2,500-pound capacity, 15.04-to-30-inch lifting range, and bolt-on swivel format give this VEVOR jack a practical profile for RV, horse, utility, camping, and yacht trailers. The included crank handle supports manual operation, while the listed carbon-steel construction provides a clear material specification.

The 15.04-to-30-inch lifting range accommodates the stated span of trailer tongue heights, and the 2,500-pound load capacity identifies its rating. Bolt-on installation avoids the weld-on option listed for some jacks, while the swivel format lets the jack swing out of the way when not needed. Its carbon-steel construction and included crank handle frame it as a manual trailer-tongue support. VEVOR lists installation parts alongside the jack, helping buyers account for the supplied mounting hardware.

Skip it if you need a 5,000-pound A-frame jack with an adjustable drop leg; VEVOR TJA-3000S+JF-1005H-Z lists those features.

This jack suits trailer owners who want bolt-on mounting, swivel storage, and a manual crank across the listed trailer types. Keep its 2,500-pound capacity in view when matching it to the tongue-support requirement.

Listed on Amazon as: VEVOR Trailer Jack, 2500 lbs Dynamic Load Capacity, Heavy Duty Swivel Bolt-on Trailer Jack with Ergonomic Handle, 15-inch Vertical Travel, Suitable for RV, Horse, Utility, Camping and Yacht Trailers