Best Motorcycle Rack For Trailer Hitch: 10 Hitch-Mount Picks

#1 · Best Overall

1. VEVOR 600 LBS Steel Carrier

• Load Capacity: 600 lb
• Material: Q235B Steel
• dimensions: 77 x 33.1 x 6.1 in
• Compatible with Vehicle Type: Car

Best for: High-Capacity Steel Hauling.

Why it ranks #1: Its 600-pound rating, 47-inch ramp, ratchet straps and stabilizer make this steel carrier a well-equipped choice for heavier motorcycles.

A 600-pound capacity and 47-inch ramp give the VEVOR steel carrier room for heavier motorcycles and a longer approach for loading. Its 76-by-7-inch platform provides a substantial track, while the specified installation height range helps buyers assess vehicle clearance before attaching it.

The Q235B steel carrier supports up to 600 pounds, a useful ceiling for buyers hauling heavier motorcycles. Its 76-by-7-inch track offers a broad loading surface, and the 47-inch ramp helps bridge the ground-to-carrier transition. The listing recommends a center-hole height of 7.87 to 19.7 inches above ground, so measuring that point can inform vehicle suitability. Ratchet straps and a stabilizer are named in the title, though the included-components list specifies only the carrier.

Skip it if you need an aluminum carrier for easier handling; the VEVOR TD-1004-04-02 is aluminum and weighs 38.6 pounds.

This VEVOR suits buyers prioritizing a 600-pound rating, a longer ramp, and a wide steel track for motorcycle transport. Check the recommended hitch-height range against your vehicle and plan for handling a 61.7-pound carrier during setup.

Listed on Amazon as: VEVOR Motorcycle Carrier, 600 LBS Steel Motorcycle Carrier Hitch Mount with 47" Longer Ramp, Scooter Dirt Bike Trailer Hauler with Ratchet Straps and Stabilizer, for Car, Truck with 2" Hitch Receiver

#2 · Highest Capacity

2. Black Widow Steel Carrier

• Load Capacity: 600 lb
• Material: Steel
• Compatible with Vehicle Type: Off-Road Motorcycle…

Best for: Traction-Coated Steel Loading.

Why it ranks #2: This 600-pound steel carrier fits Class III or IV 2-inch hitches and adds a wheel chock plus traction-coated track and ramp.

Grit-coated traction on both the track and ramp gives this Black Widow steel carrier a specific loading advantage when wheeling a bike into position. It supports up to 600 pounds on a Class III or IV 2-inch receiver, and the ramp attaches on the right side.

The 14-gauge powder-coated steel construction and 600-pound capacity suit buyers seeking a substantial hitch carrier for motorcycles, dirt bikes, or scooters. Grit coating on the track and ramp is intended to make loading and unloading easier by adding surface traction. The right-side ramp attachment establishes the loading side, so vehicle access matters during setup. Its Class III or IV 2-inch receiver fit provides a defined compatibility requirement, and the steel carrier weighs 98 pounds.

Skip it if you need to load from either side; the Black Widow AMC-400 ramp mounts on either side of its carrier.

Select this Black Widow for a motorcycle, dirt bike, or scooter within 600 pounds when traction-coated loading surfaces are useful. Confirm that right-side ramp access works at your vehicle, and account for the carrier’s 98-pound weight.

Listed on Amazon as: Black Widow Steel Motorcycle Hitch Carrier, Wheel Chock, 600 lb, 2 In Hitch

#3 · Best Included Straps

3. Mockins 500 Lb Carrier

• Load Capacity: 500 lb
• Material: Steel
• dimensions: 73.5 x 31.5 x 5.5 in
• Compatible with Vehicle Type: Dirt Motorcycle, Truck

Best for: One-Person Ramp Loading.

Why it ranks #3: The 500-pound steel carrier includes a 47-inch ramp, hitch stabilizer, four ratchet straps and four loop straps for securing a load.

A 73-inch carrier with an integrated 47-inch ramp targets one-person loading, reducing the need to lift a bike onto the track. Its 5.5-inch-wide track accommodates fat tires and dual-sport wheels, while the 500-pound capacity covers a broad range of smaller motorcycles and eBikes.

The steel carrier pairs a 47-inch ramp with a 73-inch overall length, giving one person a ramp-based route for loading rather than a direct lift. A 5.5-inch-wide track is specified for fat tires and dual-sport wheels, and the 500-pound limit sets the upper load boundary. Included loop and ratchet straps provide securing options, while the hitch stabilizer addresses movement at the connection. The supplied dimensions also make it easier to plan storage and vehicle clearance.

Skip it if you need a 600-pound rating for a heavier motorcycle; the Goplus carrier supports up to 600 pounds.

Pick the Mockins for a dirt bike, scooter, or eBike at or below 500 pounds when ramp-assisted loading and a 5.5-inch tire track matter. Its steel construction and included straps suit transport preparation, but the load limit is firm.

Listed on Amazon as: Mockins 500 Lbs. Capacity 73" Motorcycle Hitch Carrier with Loading Ramp

#4 · Tilting Design

4. Mockins 83-Inch Tilting Carrier

• Load Capacity: 500 lb
• Material: Steel
• dimensions: 83 x 6 x 8 in
• Compatible with Vehicle Type: Car, Truck, Van

Best for: Tilting Ramp Access.

Why it ranks #4: This 500-pound steel carrier has a tilting ramp design and includes a hitch stabilizer, hitch lock, four ratchet straps and four loop straps.

A tilting ramp distinguishes this 83-inch Mockins carrier, providing a loading and unloading approach that can move with the carrier rather than relying only on a fixed track. Its 500-pound capacity and 5.5-inch tire-width limit cover many dirt bikes, scooters, and eBikes using a 2-inch receiver.

The 83-by-6-inch steel frame gives the carrier a long, narrow track, while the tilting ramp is the central loading feature. The listed 500-pound capacity and tire fit up to 5.5 inches help buyers check their bike before use. It fits 2-inch receivers on cars, trucks, and vans. A hitch stabilizer and hitch lock are included, along with ratchet and loop straps, so the kit addresses both hitch connection and bike securing.

Skip it if you need stated support for tires wider than 5.5 inches; the Goplus carrier lists fit up to 7.5 inches.

This Mockins suits riders who value a tilting loading approach and need to carry a bike within 500 pounds and 5.5 inches of tire width. Its included hitch lock and straps add practical setup pieces, while receiver size remains 2 inches.

Listed on Amazon as: Mockins 83" Tilting Motorcycle Hitch Carrier with Ramp w/ 500 Lbs. Capacity

#5

5. Goplus 600 Lb Carrier

• Load Capacity: 600 lb
• Material: Steel
• Compatible with Vehicle Type: vehicle with 2" receiver

Best for: Wide-Tire Steel Carrier.

Why it ranks #5: Its 600-pound steel frame supports tires up to 7.5 inches wide, and the listing includes a loading ramp and two straps.

A stated fit for tires up to 7.5 inches wide makes the Goplus a wide-track option for riders whose tires exceed the narrower tracks listed on several other carriers. Its steel construction and 600-pound capacity support heavy-bike hauling, with a 2-inch receiver required.

The 600-pound capacity gives this steel carrier a substantial stated load ceiling for motorcycle transport. Its listing specifies tires up to 7.5 inches wide, a useful fit detail for buyers checking tire width before loading. The steel construction is described as high strength and good toughness, while the product information also states resistance to rust in rain. The included two straps and loading ramp support securing and loading, and the listing recommends not exceeding 55 mph when carrying a motorcycle.

Skip it if you need a carrier with a specified 47-inch ramp; the VEVOR TD-1004-03 lists that ramp length.

The Goplus fits buyers hauling a heavier motorcycle with tires up to 7.5 inches wide on a vehicle with a 2-inch receiver. Its stated 55 mph recommendation is an important operating boundary for planning loaded trips.

Listed on Amazon as: Goplus Motorcycle Hitch Carrier, 600LBS Motorcycle Carrier Hitch Mount with 2 Straps, Loading Ramp, Dirt Bike Trailer, Heavy Duty Motor Cycle Rack, Fit Up to 7.5” Wide Tire

#6

6. IRONMAX 600 Lb Carrier

• Load Capacity: 600 lb
• Material: Alloy Steel
• dimensions: 79 x 31 x 10 in
• Compatible with Vehicle Type: Truck

Best for: Heavy-Duty 600-Pound Hauling.

Why it ranks #6: The 600-pound alloy-steel carrier includes a loading ramp and two fixing straps, suiting buyers who prioritize a higher listed capacity.

A 600-pound capacity paired with alloy-steel construction makes the IRONMAX a heavy-duty hitch carrier for scooters, street bikes, dirt bikes, and eBikes. Its 79-by-31-inch dimensions and included loading ramp provide a substantial platform and a roll-on loading route for compatible transport setups.

The alloy-steel carrier is rated for 600 pounds, giving buyers a clear maximum when selecting a motorcycle to transport. Its 79-by-31-inch footprint helps assess how the rack will occupy space behind the truck, while the included ramp provides a loading route onto the carrier. A black anti-rust coating is specified for rainy conditions. The package also lists two fixing straps, hardware, and instructions, supporting installation and securing preparation.

Skip it if you need a lighter aluminum carrier for easier handling; the VEVOR TD-1004-04-02 weighs 38.6 pounds.

Choose the IRONMAX for a truck owner transporting a bike within 600 pounds who wants alloy steel, a ramp, and fixing straps in the listed package. Its 98-pound rack weight makes installation handling an important consideration.

Listed on Amazon as: IRONMAX 600LBS Heavy Duty Steel Motorcycle Carrier with Loading Ramp

#7

7. ECOTRIC 500 Lb Carrier

• Load Capacity: 500 lb
• Material: Steel
• dimensions: 75.91 x 32.24 x 9.06 in
• Compatible with Vehicle Type: Vehicle with 2" square receiver (class II…

Best for: Broad Receiver-Class Compatibility.

Why it ranks #7: This 500-pound steel carrier fits 2-inch square receivers across listed Classes II through V and can be loaded from either side.

Compatibility with 2-inch square receivers across Class II, III, IV, and V gives this ECOTRIC carrier unusually broad stated hitch-class coverage. Its 500-pound capacity and included ramp support motorcycle loading, while the ramp can be approached from either side to suit the space around the vehicle.

The high-strength steel frame is listed for 500 pounds, establishing a clear limit for the motorcycle or bike being transported. Its receiver compatibility spans Class II through V, provided the receiver is a 2-inch square type, which expands the stated hitch-class range. The included ramp supports loading, and access from either side can help when one side of the vehicle is blocked. Mounting hardware and installation instructions are included for setup.

Skip it if you need a 600-pound carrier for a heavier bike; the IRONMAX AU10010-HYL has a 600-pound capacity.

Choose ECOTRIC when your vehicle has a 2-inch square receiver and broad hitch-class compatibility is useful, with a bike under 500 pounds. The included ramp and hardware support setup, but the stated capacity remains the deciding load boundary.

Listed on Amazon as: ECOTRIC 500LB Hitch Mount Motorcycle Carrier Transportation Racks Hitch

#8

8. IRILIA Tilting Carrier

• Load Capacity: 500 lb
• Material: Steel
• Compatible with Vehicle Type: Dirt Bike

Best for: Tilting Platform for Narrow Tires.

Why it ranks #8: Its 500-pound steel frame has a tilting-ramp design, a 79-by-6-inch platform and stated compatibility with standard 2-inch receivers.

A 79-by-6-inch platform with a tilting-ramp design gives the IRILIA carrier a distinct loading setup for motorcycles, dirt bikes, scooters, and eBikes. It supports up to 500 pounds and lists fat-tire compatibility up to 4.3 inches wide, making tire width a key fit check.

The steel carrier’s 500-pound capacity supports a range of listed bike types, while the 79-inch platform gives the loaded wheel a long track. Its 6-inch width and 4.3-inch maximum tire width establish a specific tire-fit boundary. The tilting-ramp design is intended to make loading easier, and compatibility with standard 2-inch receivers covers cars, SUVs, and trucks. Buyers should compare both tire width and total load to these stated limits before use.

Skip it if you need room for tires wider than 4.3 inches; the Mockins MADRTBKCARBLK39 lists fit up to 5.5 inches.

The IRILIA suits riders seeking a tilting-ramp carrier for a motorcycle or eBike below 500 pounds with tires no wider than 4.3 inches. Its 2-inch receiver fit covers cars, SUVs, and trucks, subject to those load and tire limits.

Listed on Amazon as: Tilting Motorcycle Hitch Carrier with Ramp

#9 · Lightweight Frame

9. Black Widow Aluminum Carrier

• Load Capacity: 400 lb
• Material: Aluminum
• Compatible with Vehicle Type: Motorcycle

Best for: Aluminum Carrier for eBikes.

Why it ranks #9: The aluminum carrier is rated for 400 pounds and fits Class III or IV 2-inch receivers, with a ramp and anti-rattle device included.

A 400-pound aluminum frame keeps this Black Widow carrier lighter in material than the steel options, while its roll-on ramp lets you load a motorcycle or eBike without lifting it onto a bulky trailer. The ramp mounts on either side and secures flat against the carrier when stored.

The carrier fits Class III or IV 2-inch hitch receivers, giving owners of those vehicles a direct hitch-mounted alternative to a trailer. Its ramp supports roll-on loading and can be attached on either side, which helps adapt loading to the available space. When not in use, the ramp secures flat against the carrier for compact storage. An included anti-rattle device helps reduce movement in transit, and the 400-pound capacity sets a clear load limit.

Skip it if you need to carry a bike over 400 pounds; the VEVOR TD-1004-03 supports up to 600 pounds.

Choose this Black Widow for a motorcycle or eBike within 400 pounds when aluminum construction, reversible ramp placement, and compact ramp storage suit your loading routine. It fits Class III or IV 2-inch receivers, so receiver type and load remain the key boundaries.

Listed on Amazon as: Black Widow Aluminum Motorcycle Hitch Carrier with Ramp for eBike, 400 lb

#10

10. VEVOR Aluminum Carrier

• Load Capacity: 400 lb
• Material: Aluminum
• dimensions: 74.88 x 31.73 x 4.13 in
• Compatible with Vehicle Type: Car

Best for: Lighter Aluminum Hitch Rack.

Why it ranks #10: This 400-pound aluminum carrier fits the hitch-carrier use case and lists a 47-inch ramp, but its lower capacity trails the higher-rated options.

At 38.6 pounds, this aluminum VEVOR carrier is the lightest listed option here, making the rack itself more manageable to position than the heavier steel carriers. Its 400-pound capacity and 47-inch loading ramp serve buyers hauling lighter motorcycles, scooters, or eBikes on a car.

The aluminum construction keeps the carrier’s listed weight to 38.6 pounds, an advantage when moving it into position or storing it between trips. The 400-pound capacity sets its load boundary, while the 47-inch ramp provides a way to roll a bike onto the track. Its overall dimensions of 74.88 by 31.73 by 4.13 inches help with storage and vehicle-space planning. The listing identifies car compatibility and includes an accessory kit and user manual.

Skip it if you need a 500-pound capacity with an included hitch stabilizer; the Mockins MADRTBKCARBLK39 meets both listed details.

This VEVOR fits car owners who want a lighter aluminum carrier and a ramp for a bike under 400 pounds. Its compact listed thickness can help storage planning, but the 400-pound ceiling and car compatibility define the use case.

Listed on Amazon as: VEVOR Motorcycle Carrier, Aluminum Hitch Mount Rack with 47in Loading Ramp