Best Floor Jack For Cars: Compare 10 Options

#1 · Best Overall

1. AV Steel Low Profile Jack

• Load Capacity: 6600 lb
• Material: Alloy Steel
• Compatible with Vehicle Type: Car

Best for: Wide-range low-profile lifting.

Why it ranks #1: Its 3-ton capacity and 3-1/8-to-19-7/8-inch range combine low access with substantial lift height for varied car maintenance.

A 3-1/8-inch minimum height paired with a 19-7/8-inch maximum gives the AV Steel 3-ton jack a broad stated lifting span. That low entry height helps it reach many low-riding cars, while the 6,600-pound capacity and dual-piston quick-lift pump support a range of car-maintenance jobs.

The low 3-1/8-inch starting height makes access more practical when a vehicle has limited ground clearance; the 19-7/8-inch maximum provides substantial lift within the stated range. A 3-ton, 6,600-pound capacity sets the load boundary, while the dual-piston quick-lift pump is intended to raise the jack faster than a single-piston approach. Its alloy-steel construction and car compatibility make it a fit for garage car work, provided the vehicle stays within capacity.

Skip it if you need to lift a load above 6,600 pounds; the Maxority MAX1901-35X is rated for up to 11,000 pounds.

A useful fit for car owners who need low-profile access and a high maximum lift for garage service, within the 6,600-pound limit. Check that its stated range and capacity suit both the vehicle and the planned work.

Listed on Amazon as: AV Steel Low Profile Floor Jack 3 Ton (6600 lbs), Heavy Duty Hydraulic Jack for Car, Heavy-Duty Floor Jack with Dual Pistons Quick Lift Pump, Car Floor Jack with Lifting Range 3-1/8'' to 19-7/8''

#2 · Rubber Saddle Pick

2. Jack Boss Low Profile Jack

• Load Capacity: 3 tons
• Material: Aluminum
• Compatible with Vehicle Type: Bus, Trailer

Best for: Racing-style garage car work.

Why it ranks #2: This 3-ton jack lifts from 3-15/16 to 18-5/16 inches and includes a rubber saddle and two-piece handle.

The Jack Boss combines a 3-15/16-inch minimum height with a 3-ton capacity, letting it reach low-clearance vehicles while supporting loads up to 6,600 pounds. Its dual-piston quick-lift pump is intended to raise the jack faster, and the aluminum-and-steel construction pairs with a rubber saddle for vehicle contact.

For cars and other listed vehicle types, the low-profile entry height can ease positioning beneath limited-clearance chassis, while the maximum lift reaches 18-5/16 inches. The dual-piston pump supports quicker raising during repeated service steps, and the included two-piece handle gives the operator the listed pumping setup. A rubber saddle is also included for the lifting point. The jack is 28.3 inches long per its feature description, so workspace and storage room are worth considering.

Skip it if you need more than 18-5/16 inches of lift; the BIG RED T83006 reaches a listed maximum of 20-7/8 inches.

Consider it for a garage or racing-style service setup where low entry, a quick-lift pump, and a rubber saddle are useful. Its 18-5/16-inch maximum and 6,600-pound rating set the practical boundaries for vehicle fit.

Listed on Amazon as: Jack Boss 3 Ton Low Profile, Aluminum and Steel Racing Floor Jack with Dual Pistons Quick Lift Pump, 1.5X Overload Tested for Safety, Sport Utility Vehicle, Lifting Range 3-15/16" min to 18-5/16" max

#3 · Dual-Pump Lift

3. Yellow Jacket Racing Jack

• Load Capacity: 3 ton
• Material: Alloy Steel, Aluminum
• Compatible with Vehicle Type: Car, Truck

Best for: Fast low-profile vehicle service.

Why it ranks #3: The 3-ton aluminum-and-steel jack has a 3-15/16-inch minimum height and dual-piston pump for a low-clearance car setup.

A dual-pump system and 3-15/16-inch minimum height make the YELLOW JACKET a low-profile jack intended to reach low vehicles and raise them faster than a single-pump design. Its 3-ton capacity supports loads up to 6,600 pounds, with a stated maximum lift of 18-5/16 inches.

The low entry height helps with positioning under vehicles that have limited ground clearance, while the dual-pump system is specified to lift faster than a single pump. Its 3-ton rating covers up to 6,600 pounds, and the 18-5/16-inch maximum provides the upper boundary for service access. Steel and aluminum are listed materials, and the jack is described for family cars, trucks, and SUVs. These range and load figures make vehicle clearance and weight the main fit checks.

Skip it if you need more than 18-5/16 inches of lift; the BIG RED T83006 has a listed 20-7/8-inch maximum.

A fit for car, truck, and SUV owners who want low-profile access with a dual-pump lift for garage service. Keep both the 6,600-pound rating and 18-5/16-inch maximum in mind when matching it to a vehicle.

Listed on Amazon as: YELLOW JACKET Floor Jack 3 Ton Hydraulic Low Profile Aluminum and Steel Racing Car Jack with Fast Lifting Dual Pump for SUV,Truck, MVP,6600 lbs Capacity

#4

4. Maxority 3-Ton Jack

• Load Capacity: 6600 lb
• Material: Alloy Steel
• Compatible with Vehicle Type: Car

Best for: Lowered-car workshop lifting.

Why it ranks #4: Its 6,600-pound capacity, low-profile design, and extended reach target low-clearance vehicles; listed warranty is 90 days.

A long-reach, ultra-low-profile design lets the Maxority 3-ton jack access vehicles with little ground clearance, including lowered cars and sports cars. Its 6,600-pound capacity gives it a broader stated load limit than a 2-ton car jack, while the dual-piston quick-lift pump is intended to speed raising in home or workshop maintenance.

The low profile and extended reach address two access challenges at once: getting under a low undercarriage and reaching the lifting area. Once positioned, the dual-piston quick-lift pump supports faster raising, reducing repeated pumping during a maintenance task. The 3-ton rating covers loads up to 6,600 pounds, and the alloy-steel construction is suited to workshop use. A pumping handle is included; the supplied information does not give a specific minimum or maximum lifting height.

Skip it if you need a published numerical lift range before choosing; the AV Steel AV-300102F lists a 3-1/8-to-19-7/8-inch range.

This fits a home mechanic or workshop user lifting lowered cars, sports cars, or other low-clearance vehicles within 6,600 pounds. Consider that no numerical lift range is supplied, which may matter when planning a particular service task.

Listed on Amazon as: Maxority 3-Ton (6600lbs) Low Profile Hydraulic Heavy-Duty Steel Floor Jack with Dual Pistons Quick Lift Pump, Home and Workshop Car Maintenance for Various Vehicles (Random Color, 3 Ton Low Profile)

#5

5. VEVOR 2.5-Ton Jack

• Load Capacity: 2.5 tons
• Material: Steel
• Compatible with Vehicle Type: Truck

Best for: Low-entry home garage lifting.

Why it ranks #5: A 3.35-inch minimum height suits low cars, while 5,500-pound capacity and a 14.96-inch maximum suit moderate lift needs.

A 3.35-inch minimum height lets the VEVOR 2.5-ton jack slide beneath vehicles with limited clearance, making its low-profile entry useful for home maintenance. The steel jack lifts up to 5,500 pounds and reaches 14.96 inches, with a single-piston design for tire, oil, or brake work.

The low 3.35-inch starting point addresses access under lower vehicles, while the 14.96-inch maximum defines the available lift for service tasks. Its 2.5-ton, 5,500-pound capacity covers loads within that rating, and the product information identifies cars, trucks, and SUVs as use cases. The single-piston pump is a simpler listed setup than a dual-piston quick-lift system, so buyers should weigh its lift range and pump configuration against their maintenance routine.

Skip it if you want a dual-piston quick-lift pump; the YELLOW JACKET AS830011Y lists a dual-pump system for faster lifting.

A match for home mechanics who need a low entry height for car, truck, or SUV maintenance and whose lifting needs fit its 5,500-pound rating. The 14.96-inch maximum is an important boundary for the work planned.

Listed on Amazon as: VEVOR 2.5 Ton Low Profile Heavy-Duty Steel Racing Floor Jack

#6 · Extended-Height Pick

6. BIG RED T83006 Jack

• Load Capacity: 3 tons (6,000 lbs)
• Material: Steel
• Compatible with Vehicle Type: Car, Sport Utility Vehicle, Truck, Van

Best for: SUV and extended-truck lifting.

Why it ranks #6: The 3-ton steel jack reaches 20-7/8 inches and includes an extra saddle, making its range useful for taller vehicles.

An extra saddle and 20-7/8-inch maximum lift make the BIG RED T83006 a practical candidate for SUVs and extended-height trucks. It carries a 3-ton, 6,000-pound rating and starts at 5-7/8 inches, while four casters support moving the trolley jack around a garage or work area.

The extra saddle and high maximum lift are specifically associated with SUVs and extended-height trucks, giving buyers a stated use case beyond ordinary car lifting. Its 5-7/8-inch minimum sets the clearance needed to position it, and the 6,000-pound rating defines the load limit. Two large steel casters and two 360-degree swivel casters help maneuver the jack into place. The steel construction and trolley format suit users who have room to roll and store a full-size service jack.

Skip it if you need a jack to enter beneath a very low car; the VEVOR S385 has a 3.35-inch minimum height.

Choose it for garage lifting of compatible SUVs, trucks, vans, or cars when the extra saddle and 20-7/8-inch reach are useful. Its 5-7/8-inch minimum requires enough clearance, and the load must remain within 6,000 pounds.

Listed on Amazon as: BIG RED Hydraulic Trolley Service/Floor Jack with Extra Saddle (Fits: SUVs and Extended Height Trucks): 3 Ton (6,000 lb) Capacity, Red, T83006

#7

7. AV Steel 3-Ton Jack

• Load Capacity: 6000 lb
• Material: Alloy Steel
• Compatible with Vehicle Type: Truck

Best for: Standard-car and pickup maintenance.

Why it ranks #7: Its 6,000-pound capacity and 5.5-to-18.5-inch range fit standard cars, SUVs, and minivans, but not lifted or heavy-duty vehicles.

A 5.5-inch minimum height and 18.5-inch maximum give this AV Steel jack a defined range for routine lifting of standard cars, SUVs, minivans, and standard pickups. The single-piston hydraulic system keeps the specification straightforward, while its 3-ton rating supports loads up to 6,000 pounds within the stated vehicle limits.

The 5.5-to-18.5-inch lift range provides a clear working envelope for standard-height vehicles, and the 6,000-pound capacity defines the load ceiling. AV Steel lists the jack for most standard cars, SUVs, minivans, and standard pickup trucks, but excludes lifted vehicles, heavy-duty trucks, and RVs. Its single-piston design is a relevant workflow distinction for buyers comparing pump types. For EV use, the supplied information recommends a jack-point adapter to align with manufacturer-specified lift points.

Skip it if you service lifted vehicles, heavy-duty trucks, or RVs; the BIG RED T83006 is listed for trucks and SUVs and reaches 20-7/8 inches.

A sensible match for maintenance on standard cars, SUVs, minivans, and standard pickups that stay within 6,000 pounds. It is not specified for lifted vehicles, heavy-duty trucks, or RVs; EV owners should account for the recommended jack-point adapter.

Listed on Amazon as: AV Steel 3 Ton Floor Jack (6000 lbs), Single Piston Steel Hydraulic Floor Jack, Lift Range 5.5" to 18.5", Fits Cars, SUVs & Standard Trucks – Not for Lifted Vehicles or Heavy-Duty Trucks

#8

8. DNA Motoring 2-Ton Jack

• Load Capacity: 2 tons
• Material: Alloy Steel
• Compatible with Vehicle Type: Car

Best for: Low-clearance garage car work.

Why it ranks #8: The 2-ton jack lifts from 5.1 to 13 inches and is intended for cars, but the listing excludes large SUVs and trucks.

A 5.1-inch minimum height gives the DNA MOTORING TOOLS-00234 a low-profile entry point for garage work on cars with limited clearance. Its 2-ton capacity and 13-inch maximum lift suit routine service where the vehicle stays within that stated weight limit and the available lift height meets the job.

The 5.1-to-13-inch lifting range helps the jack slide beneath some lower cars while providing a defined ceiling for tire or underbody access. Its 2-ton (4,000-pound) capacity is intended for vehicles up to that limit, and the alloy-steel construction supplies the listed material for garage service. DNA MOTORING identifies it for cars and cautions against pickups, trucks, and oversized SUVs, so choosing it means keeping the job to compatible cars rather than larger vehicles.

Skip it if you need to lift a pickup, truck, oversized SUV, or vehicle above 4,000 pounds; this jack is specified for cars up to 2 tons.

Choose this for garage maintenance on a car that weighs no more than 4,000 pounds and can be raised within the 13-inch maximum. Its 5.1-inch minimum is the key clearance consideration; larger trucks and SUVs are outside its stated suitability.

Listed on Amazon as: DNA Motoring TOOLS-00234 Low Profile Hydraulic Trolley Service/Floor Jack, 2 Ton (4000 lbs) Capacity, Lifting Range 5.1"-13", Black

#9

9. AUTOWN 3-Ton Jack

• Load Capacity: 6600 lb
• Material: Alloy Steel, Aluminum
• Compatible with Vehicle Type: SUV Truck

Best for: High-clearance SUV and truck lifting.

Why it ranks #9: Its 6,600-pound capacity and 7.1-to-20.9-inch range favor SUVs and trucks, while the high minimum height may not suit sedans.

A 7.1-to-20.9-inch lifting range positions the AUTOWN jack for pickups, full-size SUVs, crossovers, and vans that need higher-clearance lifting. Its 3-ton, 6,600-pound rating and alloy-steel construction target demanding garage use, while quick-lift technology supports a faster raising workflow for compatible vehicles.

The 7.1-inch minimum and 20.9-inch maximum make this a higher-range option rather than a low-profile entry jack. That range is identified for pickups, full-size SUVs, crossovers, and vans; the supplied guidance specifically says to measure frame clearance, especially for sedans. A 6,600-pound capacity sets the load limit, and the hydraulic quick-lift system is intended to speed raising. Alloy steel is listed as a construction material for demanding garage use.

Skip it if you need a jack to slide under a low sports car; the Maxority MAX1901-20MIX is specified for low-profile access.

Best suited to owners lifting higher-clearance pickups, full-size SUVs, crossovers, or vans within 6,600 pounds. Measure frame clearance before choosing, particularly for a sedan, because the 7.1-inch minimum is the key fit boundary.

Listed on Amazon as: AUTOWN 3 Ton Floor Jack, Alloy Steel Hydraulic Car Jack with Quick Lift & Cross-Shape Rubber Pad, 7.1-20.9 Inch Lifting Range for SUV Truck (6600 lbs)

#10 · Highest Capacity

10. Maxority 5-Ton Jack

• Load Capacity: 11000 lb
• Material: Steel
• Compatible with Vehicle Type: Car

Best for: Heavy-load workshop vehicle lifting.

Why it ranks #10: Its 11,000-pound capacity is the largest listed, but the 100-pound steel jack is aimed at heavier vehicles rather than typical car needs.

An 11,000-pound capacity sets the Maxority 5-ton jack apart for buyers lifting heavier vehicles within its stated rating. Its dual-piston quick-lift pump is intended to reduce raising effort and time, while the low-profile design and steel construction position it for home or workshop car maintenance.

The 5-ton rating provides a defined 11,000-pound load ceiling for heavier service work, while the dual-piston quick-lift pump is intended to speed raising during repairs. Maxority describes the jack as low profile and suitable for cars, trucks, SUVs, and other vehicles, but the supplied specifications do not provide exact minimum or maximum heights. At 100 pounds, it is a substantial tool to move and store, so its heavy-duty capacity comes with a handling consideration.

Skip it if you need a lighter floor jack for frequent repositioning; the VEVOR S385 is listed at 13.6 kilograms.

Consider it for a workshop or home mechanic who needs the stated 11,000-pound capacity and dual-piston lifting. Its 100-pound weight affects handling, and the missing numerical lift range makes exact clearance planning less specific.

Listed on Amazon as: Maxority 5-Ton (11000lbs) Low Profile Hydraulic Super Heavy-Duty Steel Floor Jack with Dual Pistons Quick Lift Pump, Home and Workshop Car Maintenance for Various Vehicles (Red, 5 Ton Low Profile)