Best Snow Tracks For Atv: Compare 10 Track Assemblies

#1 · Best Overall

1. 91.SCS 23T Rear Track Kit

• Compatible with Vehicle Type: Go Kart, ATV, UTV, Quad, Buggy, Snowmobile…
• Size: 23T

Best for: High-Capacity Crawler Conversions.

Why it ranks #1: Lists a 23T configuration, 675 x 190 mm tracks, and 800 kg capacity for a clearly specified rear-track conversion suited to ATV use.

A stated 1764-pound load capacity distinguishes this 91.SCS rear conversion kit for buyers assessing demanding off-road projects. Its 675-by-190mm tracks use a reinforced triangular crawler design with anti-slip tread, combining a published capacity with a specified traction-oriented track structure.

The triangular crawler construction and aggressive anti-slip tread are intended to support traction, stability, and control on challenging outdoor terrain. Track dimensions of 675mm by 190mm and a 23T rear configuration give builders specific measurements and a connection detail to evaluate. The listing names go-kart, ATV, UTV, quad, buggy, snowmobile, and electric scooter compatibility, while the 800kg capacity figure provides a further reference for matching the conversion to a vehicle and use.

Skip it if you need a complete axle, chain, and brake system; Zarko’s kit specifies an 815mm axle and 428 chain drive.

This is for buyers converting a listed vehicle for demanding outdoor terrain and prioritizing a stated capacity and crawler-style tread. Use its track dimensions and 23T configuration to assess the intended installation.

Listed on Amazon as: 23T Rear Track Conversion Kit, Heavy Duty Snow Sand Tracks for Go Kart ATV UTV Quad Buggy Snowmobile Tractor Lawn Mower 150cc 200cc 250cc 300cc, Left and Right, 1764 LBS Load Capacity

#2 · Best Pair Listing

2. ZXTDR Rear ATV Track Assembly

• Material Type: Rubber
• Compatible with Vehicle Type: ATV, Snowmobile, UTV
• Size: 46 centimeters

Best for: Rotating Triangle Wheel Tracks.

Why it ranks #2: Includes a left-and-right set, specifies 23T and 460 x 120 x 300 mm dimensions, and lists ATV, UTV, and snowmobile compatibility.

Rotating triangular wheels and joints are the defining mechanism in this ZXTDR rear track assembly, which the listing says helps the motor drive steadily and safely. The set includes left and right sides and is specified for snow use across several vehicle categories.

The 460-by-120-by-300mm track dimensions give buyers concrete measurements for assessing a rear conversion, while the 23T sprocket detail identifies a drivetrain interface. The listing describes alloy and metal construction, and says the triangular wheels and their joints with the pole can rotate to support steady operation. A left-and-right set is included, with ATV, UTV, quad, mower, four-wheeler, buggy, and go-kart named among the applications.

Skip it if you need a stated 800kg capacity for a heavy conversion; 91.SCS’s 23T kit lists that load figure.

This suits buyers seeking a rear snow-track set with a 23T sprocket and rotating triangular wheel mechanism for a listed vehicle. Check the stated dimensions and drivetrain interface against the intended conversion.

Listed on Amazon as: Rear ATV Snowmobile Rubber Track Snow Sand for ATV UTV Quad Mower 4-Wheeler Buggy Go Kart

#3 · Best Spline Detail

3. YC Yier 23T Rear Tracks

Best for: 23T Spline Pair Track Kits.

Why it ranks #3: The pair of rear tracks is specified with a 23T spline and alloy material, making it a relevant option for compatible ATV and UTV builds.

A 23T spline and a pair of rear axle tracks make YC Yier’s kit a direct option for buyers seeking a specified connection and both sides. Its triangular frame and sturdy tread are described as supporting stability and grip for snow, sand, and off-road use.

The triangular frame is intended to provide stability, while the rough, sturdy tread is described as improving grip and traction on varied terrain. The pair format supplies rear axle tracks, and the 23T spline gives buyers a drivetrain connection specification to check against a gasoline-powered vehicle. The listing names quad ATV, UTV, golf cart, beach motorcycle, mountain motorcycle, and snowmobile applications, though it does not provide axle dimensions or a detailed installation procedure.

Skip it if you need a stated axle length and hub dimensions for a complete DIY assembly; Zarko’s kit lists an 815mm axle and four-stud hubs.

This suits gasoline-motor DIY buyers seeking a 23T rear track pair for a listed ATV, UTV, golf cart, or motorcycle application. The missing axle dimensions make connection and layout assessment important.

Listed on Amazon as: Pair 23T Spline Rear ATV Snow Sand Track for Go Kart UTV ATV Quad Buggy Rear Wheel Snow Sand Snowmobile DIY, Black

#4 · Best Stated Length

4. 91.SCS Pair Go Kart Tracks

• Material Type: Alloy
• Compatible with Vehicle Type: ATV
• Size: 50 in

Best for: Pair Track Replacement Buyers.

Why it ranks #4: The listing includes one left and one right track set and states a 50-inch size, with ATV compatibility identified in its specifications.

The included left-and-right pair is the clearest advantage of this 91.SCS track kit, giving buyers both sides for a rear-wheel replacement in one set. The listing identifies alloy construction and ATV compatibility, with additional description mentioning quad, UTV, and golf-cart replacement use.

A two-piece left-and-right set can simplify sourcing the matching sides of a track replacement, while the alloy material gives buyers a stated construction detail to consider. The listing specifies a 50-inch size and ATV compatibility, and its additional description names quad, UTV, and golf-cart applications. Because the product information offers little installation or drivetrain detail beyond the pair format and size, buyers should treat those stated use categories and measurements as the practical starting points for evaluating a project.

Skip it if you need a defined 23T spline connection; YC Yier’s pair track listing specifies 23T compatibility.

This is for buyers sourcing a left-and-right alloy track pair for an ATV-oriented replacement, with other vehicle types named in the description. Its 50-inch size and limited drivetrain detail make project-specific measurement important.

Listed on Amazon as: Pair Go Kart Tracks Kit Snow Sand Track UTV Buggy Quad Rear Wheel Kit ATV Electric Snowmobile Tracks

#5

5. ANGGREK 23T Snow Tracks

• Material Type: Alloy+Metal+ABS
• Size: #711

Best for: 23T Winter Track Replacements.

Why it ranks #5: Specifies a 23-teeth spline and alloy, metal, and ABS construction, with rear-side replacement use and ATV compatibility described.

ANGGREK specifies a 23-teeth spline on this rear track replacement, giving owners of compatible vehicles a defined connection detail for winter use. Its rear-left and rear-right installation orientation is also stated, making it relevant to buyers replacing worn tracks on snowy trails.

The alloy, metal, and ABS construction combines three named materials in a replacement intended for snow and mixed terrain. Its stated fit range includes ATV, UTV, mower, four-wheeler, go-kart, and quad applications, giving DIY owners several vehicle categories to consider. Because the kit is described for rear left and right installation and carries a 23T spline, buyers can assess its intended position and connection before planning a replacement; the listing gives size #711.

Skip it if you need a stated axle length and brake details; Fobuaggc’s rear axle assembly lists both axle construction and a brake disc.

This fits buyers looking for a 23T rear track replacement for winter trails on a listed vehicle type. Its rear-side orientation and #711 size are relevant boundaries, so assess those specifications against the intended replacement.

Listed on Amazon as: ANGGREK ATV Snow Tracks, Alloy Metal ABS Rear Axle Track with 23 Teeth Spline, Electric Snowmobile Track Replacement for ATV UTV Go Kart Quad Mower Winter Off Road Use

#6 · Highest Capacity

6. Fobuaggc Rear Axle Track Kit

• Material Type: Aluminum Alloy, Gray Cast Iron, Iron, Rubber
• Size: 45*12*29cm

Best for: Load-Capacity Focused Builds.

Why it ranks #6: Lists a 300 kg load capacity and an axle with bearings, iron, gray cast iron, and aluminum alloy components for off-road use.

A stated 300kg load-bearing capacity sets this Fobuaggc rear axle track assembly apart, giving off-road builders a published load figure to weigh against their vehicle and riding needs. Its listed compatibility spans go-karts, ATVs, UTVs, mountain off-road vehicles, and snowmobiles.

High-performance ball bearings are specified to reduce friction, wear, noise, and vibration, which supports smoother power transmission and can extend service life. The iron rear axle measures 1.02 inches in external diameter, while its gray cast iron brake disc and heat-treated aluminum alloy sprocket are described as wear-resistant components. Together, these details give buyers concrete drivetrain and brake construction information, alongside the 300kg capacity, when assessing a conversion for rough terrain.

Skip it if you require a stated 23T spline interface; ANGGREK’s 23T rear track replacement lists that connection specification.

This is a candidate for buyers comparing axle assemblies by load capacity and drivetrain materials for off-road vehicle use. Match the stated axle dimensions and connection details to the intended build, since the listing provides no spline count.

Listed on Amazon as: 23.6Inch Go Kart ATV Rear Axle Track Assembly Kit, Four-Wheel Motorcycle Rear Wheel Rubber Track Kit, Rear Axle Length Compatible with All-Terrain Vehicles, Snow and Sand Motorcycles, Gasoline Engines

#7

7. Zarko Triple-Gear Track Kit

Best for: DIY Axle And Track Builders.

Why it ranks #7: Combines sand and snow tracks with an 815 mm axle and a 428 chain system; suited to buyers building a compatible DIY setup.

An 815mm heavy-duty axle paired with triple internal track gears makes Zarko’s kit a substantial option for DIY all-terrain builds. The triangular gear arrangement is specified to stabilize the tracks on unstable surfaces, while the complete 428 chain system gives builders a defined drive component.

The 32-inch axle has a 30mm shaft and four-stud hubs, with compatibility stated for 6–10-inch wheels; those dimensions help builders plan an axle and wheel layout. The pair of sand and snow tracks uses three internal gears in a triangular arrangement for stability on unstable ground. A 428 chain and 41-tooth sprocket complete the specified drive system, while the 190mm brake specification helps buyers account for braking hardware during a conversion.

Skip it if you want a rear track replacement without a full axle-and-chain build; ANGGREK’s 23T replacement focuses on the track interface.

This suits experienced DIY builders assembling an ATV, UTV, go-kart, or quad drivetrain for sand or snow. Its 815mm axle, hub pattern, wheel range, chain, and brake details should guide build planning.

Listed on Amazon as: 32" Rear Axle Track Assembly Kit with Triple-Gear Sand/Snow Tracks – Complete 428 Chain System for Go Kart, UTV, ATV & Quad | 815mm Axle, 190mm Brake & 4-Bolt Hub for All-Terrain DIY Builds

#8

8. Kemblawolf 23T Track Kit

• Material Type: Metal
• Compatible with Vehicle Type: ATV, Go Kart, UTV, Buggy, Quad
• Size: Small (1:10 or 1:12 scale)

Best for: 23T Spline Vehicle Conversions.

Why it ranks #8: Describes metal tracks and 23T spline compatibility for ATVs, but its listed small 1:10 or 1:12 scale raises a significant fitment concern.

A 23T spline interface is the key differentiator on Kemblawolf’s metal rear track assembly, enabling installation on compatible ATVs, go-karts, UTVs, buggies, quads, and snowmobiles. Its stated front, rear, left, and right placement options also give buyers flexibility when choosing a position for a compatible vehicle.

The metal construction is specified for rugged use, while the snow-track design targets traction and control on snow, sand, and off-road terrain. The 23T spline compatibility provides a defined connection point for listed vehicle types, and the stated placement options cover front, rear, left, and right positions. The listing identifies the assembly as small, with 1:10 or 1:12 scale sizing, so its application is more limited than a general full-size ATV track conversion.

Skip it if you need a full-size axle assembly; Zarko’s 32-inch track kit specifies an 815mm axle for ATV and UTV builds.

This suits buyers seeking a metal, 23T-spline track assembly for a listed compatible vehicle and snow, sand, or off-road use. Check the scale sizing against the intended application; the listing specifies 1:10 or 1:12 scale.

Listed on Amazon as: Complete Karting Go Kart Track Kit Snow Sand Track Go Cart Tracks for UTV Buggy Quad Rear Wheel Kit ATV Electric Snowmobile Tracks 4 Wheeler Mower Golf Cart

#9

9. Generic Snow Rubber Tracks

• Material Type: Rubber, Kevlar

Best for: Rubber Kevlar Track Applications.

Why it ranks #9: Rubber and Kevlar construction and a stated 118 x 61 x 18 size are useful details, but the listing does not clearly specify a complete ATV pair.

A rubber-and-Kevlar material combination is the defining feature of this Generic snow track, with the listing associating it with strength and wear resistance. Its stated applications range from ATV and UTV to snow blowers and electric snowmobiles, making it relevant to multi-vehicle track projects.

The listing gives a track size of 118 by 61 by 18, providing a measurement reference for buyers planning a replacement or modification. Rubber and Kevlar are identified as the construction materials, with wear resistance cited for rough and demanding terrain. Compatibility details name buggy, quad, go-kart, karting, ATV, UTV, electric snowmobile, caterpillar, and snow blower applications. Drive wheels are mentioned in the product title and description, but the included-components specification lists a snow rubber track.

Skip it if you require a clearly stated left-and-right pair; ZXTDR’s listing specifies a set with both sides.

This is for buyers comparing rubber-Kevlar tracks for one of the listed vehicle applications and checking dimensions for a replacement or modification. Confirm the supplied track component against any project requiring separate drive wheels.

Listed on Amazon as: Snow Rubber Tracks & Drive Wheels

#10

10. SASKATE Rubber Tire Tracks

• Material Type: Rubber
• Compatible with Vehicle Type: ATV, UTV, Snowmobile, Snow Blower, Go Kart…

Best for: Rubber Track Replacement Projects.

Why it ranks #10: Rubber tracks are described for ATV and UTV use, but the listing specifies one track and provides no dimensions or axle and spline details.

Rubber construction gives the SASKATE track its defining trait, with the listing connecting that material to grip and buoyancy on low-adhesion ground. It is presented for replacement or DIY modification across ATV, UTV, snowmobile, snow blower, and go-kart applications.

The rubber tracks are described as improving grip, stability, and control across varied terrain, while added buoyancy is linked to better movement on mud, sand, and snow. The listing also says they minimize noise and vibration, a practical consideration for buyers seeking smoother operation. Its application list includes ATV, UTV, electric snowmobile, snow blower, and go-kart use, but the product description specifies a single rubber track rather than a complete left-and-right set.

Skip it if you need a complete pair in one set; 91.SCS’s pair kit specifies one left and one right track.

This suits buyers replacing an old track or pursuing a DIY modification where rubber grip and low-adhesion terrain performance matter. The single-track package detail is a key boundary for projects requiring both sides.

Listed on Amazon as: Rubber Tire Tracks for ATV/UTV – Increased Traction Track System for Snowmobile, Snow Blower, Go Kart, and Electric Vehicles