Best Kayak Carrier For RV: Compare 10 Hitch-Mount Racks

#1 · Best Overall

1. Pilida Kayak Rack

• Load Capacity: 300 lb
• Material: Steel
• Compatible with Vehicle Type: RV, SUV, Trailer, Truck

Best for: High-capacity two-kayak haulers.

Why it ranks #1: Its 300-pound capacity, adjustable height, stated 2-inch receiver fit, and included protection pad and safety straps make it a well-equipped RV choice.

A 300-pound load rating is the defining feature of Pilida’s vertical hitch rack, giving RV travelers room to carry two kayaks without relying on a lower-capacity carrier. Its adjustable-height post helps set the boats above the ground, while the steel construction and included protective pads and safety straps support the loading and tie-down routine.

The rack fits a 2-inch receiver and is listed for RVs, SUVs, trailers, and trucks, so it can move between those vehicle types when each has the specified hitch. Adjusting the vertical post helps keep different hull shapes and sizes from scraping the ground. Steel construction with a black powder-coated finish is specified to resist rust and corrosion, and the included protection pad and safety straps provide contact protection and tie-down hardware. Its stated 300-pound capacity is the key limit to observe.

Skip it if you need a carrier for a receiver other than 2 inches; KINHUI PHT-001 also specifies a 2-inch receiver, so it will not resolve that mismatch.

Choose Pilida if your RV or tow vehicle has a 2-inch receiver and you want a vertical rack rated for two kayaks and 300 pounds. Its adjustable post helps with ground clearance, but the stated capacity remains the boundary.

Listed on Amazon as: RV Hitch Mount Kayak Rack Fits 2" Receiver,Vertical Carrier for 2 Kayaks up to 12 ft,Height Adjustable,300 lbs Capacity for RVs,Trucks,SUVs & Trailers

#2 · Best Height Range

2. EONECROSS Hitch Rack

• Load Capacity: 300 lb
• Material: Carbon Steel
• Compatible with Vehicle Type: RV TRUCK VAN SUV

Best for: Long-kayak adjustable-fit haulers.

Why it ranks #2: It carries up to 300 pounds and specifies 57-to-66-inch height adjustment, with an adjustable-width base for different kayak bow shapes.

EONECROSS offers a 57-to-66-inch adjustable height range, a concrete fit advantage for carrying kayaks from 6 to 12 feet while keeping the base clear of the ground. Its reinforced 3 mm steel construction and 300-pound rating support two kayaks, while an adjustable-width base accommodates different bow shapes.

The height range lets owners tune the carrier for kayak length and ground clearance, rather than relying on a single fixed position. The adjustable-width base is specified to fit different bow shapes, giving the hulls a more secure resting point. Reinforced 3 mm carbon steel supports a stated 300-pound total load for two kayaks. It fits most standard 2-inch receivers on listed vehicle types, and the package includes two tie-down straps for securing the load.

Skip it if you carry kayaks shorter than 6 feet; StellarStar XHKR-L lists two-kayak transport up to 12 feet without that stated lower length boundary.

Choose EONECROSS for two-kayak loads within 300 pounds when adjustable height and bow-width fit matter. Its 57-to-66-inch range and stated 6-to-12-foot kayak range are useful boundaries to check against your setup.

Listed on Amazon as: Upgraded RV Hitch Mount Kayak Rack for 2 Kayaks up to 12 FT

#3 · Best Multi-Gear

3. Unicoshape Kayak and Bike Rack

• Load Capacity: 300 lb
• Material: Alloy Steel
• Compatible with Vehicle Type: Car, Trailer, Truck, Van

Best for: Kayak-and-bike family transport.

Why it ranks #3: Its 300-pound rating and stated capacity for two kayaks and two bikes suit multi-sport trips, though its combined load needs careful checking.

Unicoshape’s dual-purpose carrier can transport two kayaks and two bicycles at the same time, addressing multi-sport trips with one hitch-mounted setup. It has a 300-pound load rating, folds, and fits 2-inch receivers, making combined gear capacity and the vehicle’s hitch the central planning considerations.

The carrier is specified for two kayaks up to 12 feet and two bicycles, so families can bring both water and cycling gear on one trip. Its 300-pound rating sets the combined load limit for that equipment. A foldable design can make storage or access easier when the carrier is not in use, while the listed 2-inch hitch installation applies to trucks, SUVs, RVs, and vans. The rack weighs 54 pounds, a handling consideration when attaching or removing it.

Skip it if you carry kayaks only and want a lighter rack to handle; KINHUI PHT-001 weighs 14 kg and includes an anti-sway cradle.

Unicoshape suits family trips combining kayaking and cycling, provided the kayaks, bikes, and other carried load stay within 300 pounds. Its 54-pound weight and 2-inch hitch fit are important handling and compatibility boundaries.

Listed on Amazon as: Vertical RV Kayak Rack and Bike Carrier for 2 Kayaks and 2 Bikes, 300 LBS Load Capacity Heavy Duty Alloy Steel | 2" Hitch Mount Foldable Universal Fit for Truck, SUV, RV, Van

#4 · Best With Anti-Sway Cradle

4. KINHUI Vertical Rack

• Load Capacity: 150 lb
• Material: Steel
• Compatible with Vehicle Type: Trailer, Truck

Best for: Two-kayak trailer and truck trips.

Why it ranks #4: This 150-pound, two-kayak rack includes an anti-sway cradle and lists a two-year manufacturer warranty for RV and trailer-oriented use.

KINHUI’s anti-sway cradle gives this vertical carrier a specific stability feature for transporting two kayaks, each up to 12 feet long. The rack fits a 2-inch receiver and is rated for 150 pounds, making it a space-conscious option for RV and truck outings where the combined load stays within that stated limit.

The vertical layout is described as saving space while keeping kayaks organized, which can help reserve other vehicle storage for trip gear. A standard 2-inch receiver is the stated mounting interface, and the included mounting bracket and load bar form part of the rack’s hitch setup. The anti-sway cradle and tie-down strap address kayak restraint during transport. Its 150-pound load rating is lower than some listed options, so the combined kayak load must stay within that limit.

Skip it if you need more than 150 pounds of capacity; Pilida’s Kayak Rack L is rated for 300 pounds and carries two kayaks up to 12 feet.

KINHUI suits RV and truck owners carrying two kayaks within its 150-pound limit who value the included anti-sway cradle. It requires a 2-inch receiver, and its listed vehicle compatibility emphasizes trailers and trucks.

Listed on Amazon as: RV Hitch Mount Kayak Rack Holds 2 up to 12' Kayaks Height Adjustable Vertical Standing Kayak Carrier 2" Receiver,150 lbs Capacity for RV,Truck,SUV, Trailer

#5

5. KSGIE Vertical Rack

• Load Capacity: 150 lb
• Compatible with Vehicle Type: Trailer, Truck

Best for: Anti-sway cradle transport.

Why it ranks #5: It holds two kayaks up to 12 feet, fits standard 2-inch receivers, and includes an anti-sway cradle with a stated two-year manufacturer warranty.

KSGIE includes an anti-sway cradle, making restraint the defining detail of this vertical carrier for two kayaks up to 12 feet. Its 150-pound capacity and 2-inch receiver specification establish the load and hitch requirements, while the raised carrier layout is described as improving ground clearance and preventing dragging.

The vertical layout saves space and keeps gear organized for road trips and camping, while the elevated position is described as helping prevent kayak dragging. The anti-sway cradle, load bar, and mounting bracket are included, alongside a tie-down strap, to support the rack and kayak restraint workflow. It is rated for 150 pounds and two kayaks up to 12 feet. The listed vehicle compatibility names trailers and trucks, so those are the explicitly specified applications to consider.

Skip it if you need a 300-pound rating; Pilida Kayak Rack L supports 300 pounds and is specified for RVs, SUVs, trailers, and trucks.

KSGIE suits truck and trailer owners carrying two kayaks within 150 pounds who value an anti-sway cradle and included mounting hardware. Its 2-inch receiver requirement and listed vehicle compatibility shape the fit.

Listed on Amazon as: RV Hitch Mount Kayak Rack, Vertical Kayak Carrier Holds 2 Kayaks Up to 12 ft, Height Adjustable, Fits 2" Hitch Receiver, 150 lbs Capacity for RV,Truck,SUV and Trailer

#6 · Best Ratchet Straps

6. PENSUN Hitch Rack

• Load Capacity: 150 LBS
• Material: Alloy Steel
• Compatible with Vehicle Type: RV, Truck, SUV

Best for: Ratchet-strap RV travel.

Why it ranks #6: Its 150-pound capacity supports two kayaks, and the listed included components specify ratchet straps and a 12-month warranty.

PENSUN supplies ratchet straps with its vertical carrier, giving RV travelers a specified tie-down option for securing kayaks, canoes, or paddle boards. Its alloy-steel frame supports up to 150 pounds and fits standard 2-inch receivers, while adjustable height helps accommodate different kayak sizes during transport.

The vertical arrangement is described as saving storage space on an RV or trailer, which can keep watercraft outside the vehicle’s interior. Adjustable height helps suit different kayak sizes, and the 150-pound capacity sets the total load boundary. The included ratchet straps provide the stated securing hardware. Its standard 2-inch hitch compatibility is listed for RVs, travel trailers, trucks, and SUVs, giving owners with those receiver-equipped vehicles a shared rack option.

Skip it if you need a 300-pound load rating; Unicoshape US2632301 is rated for 300 pounds and can carry two kayaks and two bikes.

PENSUN suits RV and trailer travelers seeking an adjustable vertical carrier with ratchet straps for watercraft within 150 pounds. Its stated 2-inch receiver fit and listed vehicle types define where it can be used.

Listed on Amazon as: PENSUN RV Hitch Mount Kayak Rack, 2" Hitch Mount Vertical Kayak Carrier, Height Adjustable Heavy Duty Steel Kayak Holder Holds Up to 150LBS for RV, Truck, SUV, with Soft Padding & Ratchet Straps

#7

7. Autoholic Hitch Rack

• Load Capacity: 150 lb
• Material: Carbon Steel, Protective layer
• Compatible with Vehicle Type: Car, Recreational Vehicle (RV), Truck, Van

Best for: Padded, wobble-conscious transport.

Why it ranks #7: It fits 2-inch receivers and lists 150 pounds of capacity, protective padding, two tie-down straps, and a hitch tightener.

Autoholic includes a hitch tightener alongside upgraded foam padding, pairing a hitch-stability component with hull-contact protection for road transport. Height-adjustment holes accommodate kayaks up to 12 feet, while the rack’s 150-pound capacity and 2-inch receiver fit define the load and vehicle setup it can serve.

The included hitch tightener addresses movement at the receiver, while the upgraded foam padding and protective layers cushion kayak contact points. Height-adjustment holes let the carrier be set for kayaks up to 12 feet and help prevent ground dragging. Two tie-down straps are included to secure the boats. The rack is listed for vehicles including RVs, trucks, vans, and cars, but its 150-pound load rating sets the maximum combined load for the carried gear.

Skip it if you need a 300-pound rating; EONECROSS ULK-01 supports that load and includes an adjustable-width base for different kayak bows.

Autoholic fits an RV owner prioritizing padded kayak contact points and a supplied hitch tightener, with two straps for tie-downs. Keep the 150-pound limit and 2-inch receiver requirement in view when planning the load.

Listed on Amazon as: Upgraded RV Hitch Mount Kayak Rack

#8

8. NarwooAuto Hitch Rack

• Load Capacity: 150 LBS
• Material: Carbon Steel
• Compatible with Vehicle Type: RV, SUV, Trailer, Truck

Best for: Cross-vehicle 2-inch hitch use.

Why it ranks #8: This 150-pound carbon-steel rack fits standard 2-inch receivers and includes protective pads, safety straps, and zip ties.

NarwooAuto’s height-adjustable base lets owners raise or lower the kayak support to help prevent ground scraping and match different kayak shapes. Its 2-inch receiver fit is specified for RVs, pickups, SUVs, and trailers, making the rack relevant to households moving gear between those vehicle types.

The adjustable base supports changes in height for different kayak shapes and sizes, with ground clearance as a stated benefit. A standard 2-inch receiver is the specified interface across the listed RV, SUV, trailer, and truck applications. The carbon-steel rack is rated for 150 pounds, and the package includes sponge protective pads and safety straps to cushion and secure the kayaks. At 44.7 pounds, the rack itself is a substantial item to handle during installation or storage.

Skip it if you want a lighter listed rack to handle; KINHUI PHT-001 weighs 14 kg and includes an anti-sway cradle.

NarwooAuto fits owners moving a kayak rack among vehicles with standard 2-inch receivers who want adjustable height and included protective pads. Account for its listed 44.7-pound rack weight when handling or storing it.

Listed on Amazon as: RV Kayak Hitch Rack for Camper with Adjustable Height

#9

9. StellarStar Adjustable Rack

• Load Capacity: 150 lb
• Material: Carbon Steel
• Compatible with Vehicle Type: Recreational Vehicle (RV), SUV, Trailer, Truck

Best for: Width-adjustable kayak loading.

Why it ranks #9: It offers a 150-pound capacity and two adjustable crossbars, plus listed foam pads, straps, mounting hardware, and instructions.

Two adjustable crossbars distinguish StellarStar’s XHKR-L-Upgrade, allowing the rack’s support width to be changed for different kayak sizes. Its adjustable-height base also helps prevent ground scraping, while the steel construction and 150-pound rating suit owners whose combined load stays within the stated capacity.

The adjustable crossbars let users alter the support width, which can help accommodate different kayak sizes without treating the rack as a fixed-width cradle. A height-adjustable base adds another fit adjustment and is specified to prevent scraping. The steel rack has a 150-pound maximum load, so kayak weight remains an important constraint. Included foam pads provide contact cushioning, while straps, zip ties, mounting hardware, and instructions supply the listed securing and assembly items.

Skip it if you require more than 150 pounds of capacity; Pilida Kayak Rack L is rated for 300 pounds and carries two kayaks up to 12 feet.

This StellarStar version suits owners who need adjustable support width as well as height for their kayak setup. Its 150-pound capacity is the key boundary, and the included pads and tie-down accessories support a complete loading routine.

Listed on Amazon as: StellarStar RV Hitch Mount Kayak Rack with 2 Adjustable Crossbars

#10

10. StellarStar Vertical Rack

• Load Capacity: 150 lb
• Material: Carbon Steel
• Compatible with Vehicle Type: Car, Trailer, Truck

Best for: Basic padded two-kayak hauling.

Why it ranks #10: This 150-pound vertical rack has an adjustable base and includes protective pads, safety straps, and zip ties, but its receiver fit is less explicit.

StellarStar’s XHKR-L combines an adjustable-height base with included sponge protective pads, helping owners set kayak clearance while cushioning contact points. The listing specifies two kayaks up to 12 feet and a 150-pound capacity, giving RV and trailer travelers clear size and load limits for planning.

Adjusting the base height helps keep kayaks from scraping the ground and adapts the rack to different kayak sizes and shapes. Sponge pads provide the listed protective contact layer, while safety straps and zip ties are included for securing the load. The carbon-steel carrier is rated for 150 pounds, so combined kayak weight must stay within that figure. Its listed vehicle types include cars, trailers, and trucks, making the receiver-equipped vehicle setup a practical consideration before loading.

Skip it if you need capacity above 150 pounds; EONECROSS ULK-01 supports 300 pounds and has an adjustable-width base for different kayak bows.

Choose this StellarStar for two kayaks up to 12 feet when adjustable height and included padding matter more than a higher load rating. Its 150-pound capacity and listed vehicle types are the relevant fit boundaries.

Listed on Amazon as: StellarStar RV Hitch Mount Kayak Rack for 2 Kayaks up to 12 ft