Best Steps For Golf Carts for ICON, Club Car, Yamaha and EZGO

#1 · Best Overall

1. REVENGE ICON Four-Step Nerf Bars

• Material: Carbon Steel
• Compatible with Vehicle Type: Golf Cart
• Weight: 47 lb

Best for: Four-step ICON access.

Why it ranks #1: The ICON i-Series-specific set includes four carbon-steel steps, four mounting brackets and hardware, with no-drilling installation stated.

Four side steps and four mounting brackets make this REVENGE set the option for ICON owners seeking a step on both sides at two positions. It is made for 2022–2025 ICON i-Series carts, with carbon-steel construction, a high-gloss powder coat, and no-drill installation specified.

The four-step package includes four mounting brackets, two per side, plus hardware, and the stated installation requires no drilling. That arrangement supplies more step positions than a basic pair for access around the cart. Carbon steel provides the construction, while the high-gloss powder-coated finish is specified for protection against the elements. Compatibility is identified as ICON i-Series golf carts in the 2022–2025 range, so buyers should verify that exact model family and year span.

Skip it if you need only a two-step set; the four-step package adds two additional steps and weighs 47 pounds.

This set suits 2022–2025 ICON i-Series owners who want four step positions and no-drill mounting. Its larger four-step configuration is the key distinction from a two-step arrangement, so match the quantity and cart fit to your access needs.

Listed on Amazon as: Heavy Duty Steel Side Step Nerf Bars for ICON Golf Carts Years 2022-2025 (Set of 4)

#2 · Best Two-Step Set

2. REVENGE ICON Two-Step Nerf Bars

• Material: Carbon Steel
• Compatible with Vehicle Type: Golf Cart
• Weight: 22 lb

Best for: Lifted ICON i-Series owners.

Why it ranks #2: Made for ICON i-Series carts, this two-step carbon-steel set includes mounting brackets and hardware and specifies no-drilling installation.

No-drill mounting makes these REVENGE side steps a practical access upgrade for 2022–2025 ICON i-Series carts. The pair attaches with supplied brackets and hardware, while carbon-steel construction and a high-gloss powder-coated finish add a substantial step and a protective, off-road-inspired exterior accent.

The set includes two carbon-steel side steps, two mounting brackets, and installation hardware, so the listed installation does not require drilling. That can simplify fitting while avoiding new holes in the cart. Their stated compatibility is with ICON i-Series golf carts, specifically the listed 2022–2025 range, making model and year the key fit checks. The high-gloss powder coat is specified for protection against the elements, and the steps are also described as helping protect the side frame and body.

Skip it if you own a different cart make or model; the listed fit is for 2022–2025 ICON i-Series carts.

For owners of a lifted, compatible ICON i-Series cart, this two-step set combines easier entry with side-frame protection and a rugged look. Check the stated model-year range before choosing it; it is not listed as a universal golf-cart accessory.

Listed on Amazon as: Heavy Duty Steel Side Step Nerf Bars for ICON Golf Carts Years 2022-2025 (Set of 2)

#3 · Best Precedent Fit

3. STEELENG Precedent Nerf Bars

• Material: Alloy Steel
• Compatible with Vehicle Type: Golf Cart

Best for: Club Car Precedent owners.

Why it ranks #3: This pair is specifically for Club Car Precedent carts and lists extra-thick alloy steel, included brackets and installation hardware.

Extra-thick steel and included installation brackets make STEELENG’s two-piece running-board set a straightforward option for Club Car Precedent owners. Its black powder coating adds a finished exterior surface, and the supplied hardware and step-by-step instructions support an installation workflow without sourcing those items separately.

The set is specifically identified for Club Car Precedent carts and includes two alloy-steel nerf bars, making the intended application clear before purchase. Extra-thick steel is paired with a black powder-coated finish, combining substantial construction with a coated exterior. Brackets, all hardware, and step-by-step installation instructions are stated as included, which helps buyers plan the fitting process around the supplied components. The available description does not specify a broader model-year range, so the named Precedent fit is the relevant boundary.

Skip it if you need a listed application for a cart other than the Club Car Precedent.

This set suits Club Car Precedent owners seeking paired steel running boards with brackets and installation materials included. The product information identifies the cart model but not a year range, so buyers should keep that stated fit boundary in view.

Listed on Amazon as: Steeleng Heavy Duty Nerf Bars/Running Boards for Club Car Precedent Golf Cart(Set of 2), Black

#4 · Best Yamaha Fit

4. ACED Parts Yamaha G29 Nerf Bars

• Material: Alloy Steel
• Compatible with Vehicle Type: Golf Cart

Best for: Yamaha G29 Drive owners.

Why it ranks #4: The set is specified for Yamaha G29 Drive gas and electric carts from 2007 to 2016, with brackets, hardware and instructions included.

A complete bracket-and-hardware package distinguishes these ACED Parts running boards for 2007–2016 Yamaha G29 Drive carts. The two-bar set is listed for both gas and electric versions, with extra-thick alloy steel and a black powder-coated finish providing a substantial step surface and coated exterior.

These bars are specified for Yamaha G29 Drive carts from 2007 through 2016, covering both gas and electric versions, so the powertrain does not narrow the stated application. Extra-thick alloy steel gives the pair its heavy-duty construction, while the black powder-coated finish is the listed surface treatment. Brackets, hardware, and step-by-step instructions are included, helping buyers prepare for installation without assembling those components separately. Check that the cart is a G29 Drive within the specified years before ordering.

Skip it if you have a Yamaha cart other than a G29 Drive from 2007–2016; that is the specified application.

For owners of a 2007–2016 Yamaha G29 Drive, this pair combines thick steel construction with a supplied installation package. Its stated compatibility covers gas and electric carts, but does not extend to other Yamaha models or years.

Listed on Amazon as: Heavy Duty Nerf Bars/Running Boards for Yamaha G29 Drive Golf Cart (2007 to 2016 Gas & Electric – Set of 2)

#5 · Best EZGO Fit

5. WUTIST EZGO RXV Nerf Bars

• Material: Steel
• Compatible with Vehicle Type: Golf Cart

Best for: EZGO RXV owners.

Why it ranks #5: This steel running-board kit fits 2008-present EZGO RXV gas and electric carts and has a powder-coated finish; several other EZGO models are excluded.

WUTIST identifies its steel nerf-bar kit for 2008-present EZGO RXV gas and electric carts, with several other EZGO models explicitly excluded. A powder-coated surface is specified for outdoor rust resistance, while the bars are also described as helping protect the cart body from scratches.

The compatibility listing covers 2008-present EZGO RXV carts in gas and electric versions, making the model designation important when checking fit. It expressly excludes standalone Valor, Liberty, TXT, Express, and 2Five models, so an EZGO badge alone is not enough to establish compatibility. Steel construction is paired with a powder-coated finish described as resistant to rust during outdoor use. The stated body-protection purpose adds a practical reason to fit the bars beyond providing a side step.

Skip it if you have a standalone Valor, Liberty, TXT, Express, or 2Five rather than an EZGO RXV.

This kit fits buyers seeking side bars for a listed EZGO RXV and a powder-coated surface for outdoor use. Check the model carefully: several other EZGO lines are explicitly excluded, despite sharing the same manufacturer.

Listed on Amazon as: Wutist Nerf Bar Running Board Kit Compatible with 2008-Present EZGO RXV

#6

6. MADJAX Genesis Rear Seat Step

• Weight: 4.5 lb

Best for: Genesis rear-seat passengers.

Why it ranks #6: Designed for MadJax Genesis 250 and 300 rear-seat kits, it attaches across E-Z-GO, Club Car and Yamaha cart models.

This MADJAX side step attaches to Genesis 250 and 300 rear-seat kits, giving passengers a dedicated foothold when climbing into the back. Its compatibility spans those seat kits on E-Z-GO, Club Car, and Yamaha carts, so the rear-seat kit—not just the cart make—is central to fit.

The step is made for MadJax Genesis 250 and 300 rear-seat kits, providing a specific access point for passengers entering the rear seating area. The listing names E-Z-GO, Club Car, and Yamaha carts as compatible when those Genesis kits are installed, which makes this more targeted than a general side step. It is supplied as a single side step and weighs 4.5 pounds, a compact package for buyers adding an access aid to an existing rear-seat setup.

Skip it if you need a step for the front entry or do not have a Genesis 250 or 300 rear-seat kit.

This is a focused choice for owners adding passenger access to a Genesis 250 or 300 rear seat on a listed cart make. It is not presented as a universal front-entry step, and the matching rear-seat kit is essential.

Listed on Amazon as: MADJAX Genesis 250 and 300 Rear Seat Side Footstep for Various Golf Carts

#7

7. MODZ Evolution D5 Nerf Bar Kit

• Material: Alloy Steel
• Compatible with Vehicle Type: Golf Cart
• Weight: 53 lb

Best for: Evolution D5 Ranger 2+2 owners.

Why it ranks #7: Designed for Evolution D5 Ranger 2+2 carts, this alloy-steel kit has a powder-coated finish and states that installation needs no cutting or drilling.

A laser-cut design and no-drill installation are the central draws of MODZ’s four-passenger nerf bar kit for Evolution D5 Ranger 2+2 carts. The black powder-coated steel set includes hardware, while its customizable accent plate lets owners paint that detail to coordinate with their cart.

The kit is listed for Evolution D5 Ranger 2+2 golf carts, and its precision laser-cut design is described as providing an OEM-quality fit for integration with the cart. Installation is stated to require no cutting or drilling, with complete hardware included, simplifying the listed setup process. Alloy-steel construction and a textured matte powder-coated finish combine a durable material with a finished surface. The customizable accent plate can be painted to match a cart’s color or style for a more tailored appearance.

Skip it if you own a different cart model; this kit is listed specifically for the Evolution D5 Ranger 2+2.

Choose this kit for an Evolution D5 Ranger 2+2 when a no-cut, no-drill installation and customizable accent plate suit your priorities. Its stated fit is specific to that model, so it is not a general-purpose four-passenger bar kit.

Listed on Amazon as: MODZ 4 Passenger Nerf Bar Kit – Fits Evolution D5 Ranger 2+2 Golf Carts – Black Powder-Coated Steel

#8

8. KUAFU Club Car Onward Nerf Bars

• Compatible with Vehicle Type: Golf Cart
• Weight: 29.6 lb

Best for: Club Car Onward step upgrade.

Why it ranks #8: The steel pair is designed for 2018–2019 Club Car Onward carts and uses an electrophoresis and powder-coated finish; modified tires are not supported.

A redesigned, reinforced running-board structure gives KUAFU’s nerf bars their clearest appeal for 2018–2019 Club Car Onward owners. The steel left-and-right pair adds side access and uses an electrophoresis-plus-powder-coated finish, while its specified fit excludes carts with modified tires.

The listing identifies steel construction and a redesigned structure intended to improve rigidity, giving buyers a sturdier step platform than an unspecified basic design. Left- and right-side placement provides running-board coverage on both sides of the cart. The electrophoresis and powder-coated surface treatment is specified as the finish, while the fit is limited to 2018–2019 Club Car Onward carts. Because modified-tire vehicles are explicitly excluded, tire changes are a decisive compatibility check before installation.

Skip it if you have modified tires or a Club Car Onward outside the 2018–2019 range; those configurations are not listed as compatible.

Choose this pair for a standard-tire 2018–2019 Club Car Onward when bilateral running-board access and a rigidity-focused redesign matter. Its fit is narrowly specified, so modified tires or another cart model put it outside the stated application.

Listed on Amazon as: KUAFU Nerf Bars Compatible with 2018-2019 Club Car Onward Golf Carts

#9

9. ALMULOO Club Car Onward Nerf Bars

• Material: Steel
• Compatible with Vehicle Type: Compatible with 2018 2019 Club Car Onward…
• Weight: 35.3 lb

Best for: Standard-tire Onward carts.

Why it ranks #9: This steel pair targets 2018–2019 Club Car Onward carts and has electrophoresis and powder-coat surface treatment; the listing excludes modified tires.

ALMULOO specifies its steel nerf bars for 2018–2019 Club Car Onward carts, with an electrophoresis and powder-coated treatment intended to resist rust and scratches. The pair offers a model-specific running-board option, but the listing excludes vehicles equipped with modified tires.

The stated compatibility is focused on 2018–2019 Club Car Onward carts, giving owners a defined model and year range to check. High-grade steel provides the listed bar material, while the electrophoresis and powder-coated surface treatment is described as resistant to rust and scratches. The package contains one pair of bars, enabling installation on both sides. Modified-tire vehicles are explicitly excluded, so retaining standard tires is an important part of the fit decision for this set.

Skip it if you have modified tires or a cart outside the 2018–2019 Club Car Onward fit range.

This pair is suited to owners of standard-tire 2018–2019 Club Car Onward carts who want steel running boards with a treated finish. Its narrow model-year application and modified-tire exclusion are important fit boundaries.

Listed on Amazon as: ALMULOO Nerf Bars Running Boards Compatible with Car Onward Golf Carts

#10

10. MADJAX Armor Drop-Down Nerf Bars

• Material: Alloy Steel
• Compatible with Vehicle Type: Passenger Car
• Weight: 15 lb

Best for: Textured drop-step styling.

Why it ranks #10: The pair combines alloy-steel nerf bars with drop-down steps, but cart-specific mounting brackets are sold separately and fitment is not specified here.

A drop-down step integrated with an armor-style nerf bar gives this MADJAX kit a lower foothold and a textured, off-road appearance. The set covers both driver and passenger sides, but the cart-specific mounting brackets are sold separately, so installation requires an additional fit-specific component.

The alloy-steel bars combine a drop-down side step with an armor-style profile, giving buyers an access point alongside the cart and a protective-looking exterior treatment. Their matte textured finish is specified as durable and sporty, while the kit includes both driver- and passenger-side bars. The supplied description says model-specific mounting brackets are sold separately, making bracket selection a necessary part of planning installation. The listing does not identify a universal cart fit, so the cart model must guide that choice.

Skip it if you want an all-in-one mounting kit; the model-specific brackets are not included with these bars.

Consider this set when you want paired drop-down steps and a matte, textured armor look for a compatible cart. Allow for separately purchased model-specific brackets, since the included bars alone do not complete the mounting setup.

Listed on Amazon as: MadJax Armor Nerf Bar with Drop Down Side Step in Matte Lack Texture Finish