Best Motorcycle Stand For Storage: Compare 10 Options

#1 · Best Overall

1. SUNROAD Motorcycle Dolly

• Dimensions: 81.5"L x 32"W x 3"H
• Material: motorcycle dolly stand, motorcycle dolly…

Best for: Rolling garage storage dolly.

Why it ranks #1: Purpose-built for storage and repositioning, it supports up to 1,250 pounds on five swivel casters; its 81.5-by-32-inch footprint needs room.

Five swivel casters define the SUNROAD dolly's storage role, enabling a motorcycle to be repositioned across a garage or workshop floor without pushing, lifting, or extra help. Its 1,250-pound capacity and 81.5-by-32-inch dimensions give buyers concrete weight and footprint limits to assess.

The reinforced-steel dolly is rated for bikes up to 1,250 pounds, and the five heavy-duty swivel casters support controlled rolling for repositioning on garage or workshop floors. That makes it a storage-mobility choice rather than a specified height-adjustable lift: the listed product dimensions are 81.5 inches long, 32 inches wide, and 3 inches high. It is described as suitable for most street bikes, cruisers, and touring motorcycles, so buyers should consider both the stated category and the substantial floor footprint before selecting it.

Skip it if you need to raise wheels for maintenance instead of moving a stored bike; the VEVOR TD-003-05FR includes front and rear lifting stands.

This SUNROAD dolly suits owners who need to move a compatible motorcycle within a garage while keeping it on a low rolling platform. Measure the 81.5-by-32-inch footprint and respect its 1,250-pound limit.

Listed on Amazon as: SUNROAD 1250 lbs Motorcycle Dolly with 5 Swivel Casters(black)

#2 · Highest Capacity

2. VEVOR 1100 lb Combo Stand

• Dimensions: 30.31 x 23.23 x 13.78 in
• Weight: 21.4 lb
• Material: steel

Best for: Wide-range adjustable combo support.

Why it ranks #2: The front-and-rear combo supports up to 1,100 pounds and offers adjustable front and rear fork-head widths for a range of fitments.

Three specified fork-head width ranges distinguish this VEVOR combo, letting owners configure front and rear supports around different motorcycle widths. The front head adjusts from 7.1 to 10.6 inches, while the rear U- and L-shaped heads cover separate ranges, paired with a combined 1,100-pound capacity.

The adjustable front dual-fork head spans 7.1–10.6 inches, and the rear U-shaped and L-shaped heads span 11.8–15.7 and 12.2–15 inches respectively. Those ranges make support-width selection more deliberate when setting up the front or rear lift, rather than leaving buyers with one fixed dimension. The steel combo is rated for 1,100 pounds across the front and rear stands, giving a substantial stated load ceiling for storage or maintenance; check the relevant head range and load against the bike.

Skip it if you need a single low-profile scissor jack instead of separate front and rear stands; the OMT FBA_OMT-MML-ZX09-08 lifts from 3.7 to 14.6 inches.

This VEVOR combo is for owners who want separately adjustable front and rear support widths and a 1,100-pound combined rating. Check each head's listed range against the motorcycle's lifting points before use.

Listed on Amazon as: VEVOR Motorcycle Stand Lift 1100 lbs Capacity Front Rear Combo Stand Lift

#3 · Broad Fit Combo

3. VEVOR 850 lb Combo Stand

• Dimensions: 22.1 x 19.1 x 5.3 in
• Weight: 20 lb
• Material: Steel

Best for: Front-and-rear garage storage.

Why it ranks #3: This steel front-and-rear set supports 850 pounds and is described as compatible with most Yamaha, Honda, Kawasaki, and Suzuki motorcycles.

The included front and rear stands give this VEVOR set a two-wheel lifting setup, enabling storage and maintenance support at both ends of the motorcycle. Its 850-pound capacity and stated compatibility with many Yamaha, Honda, Kawasaki, and Suzuki motorcycles make it a practical option for owners seeking a matched pair.

Heavy-duty steel construction, reinforced limit clips, and precisely positioned bracket slots are intended to keep the lift stable rather than shaky while the bike is raised. The set supports motorcycles up to 850 pounds and specifies a tire radius within 13.8 inches, giving buyers concrete load and sizing boundaries to check. With both front and rear stands included, the pair can support a storage routine that lifts either end, while its 20-pound total weight is relevant when moving or putting the stands away.

Skip it if you need a single center scissor jack with adjustable height; the VIVOHOME VH012 provides a 3.5-to-14.5-inch lifting range.

This VEVOR pair suits riders storing or maintaining a compatible motorcycle with both ends supported. Check the 850-pound capacity and 13.8-inch tire-radius boundary against your bike before choosing it.

Listed on Amazon as: vevor Motorcycle Stand Lift 850lbs Front Rear Combo Stand Lift Stand Front Wheel Fork Stands Rear U+L Fork Swingarm Spool Stands Compatible with Most Yamaha Honda Kawasaki Suzuki Motorcycles Black

#4 · Powder-Coated Combo

4. SPECSTAR Motorcycle Stands

• Dimensions: 31.1 x 18.8 x 15.7 in
• Weight: 19.8 lb
• Material: Alloy Steel

Best for: Rust-conscious front-and-rear lifting.

Why it ranks #4: The alloy-steel front-and-rear combo has an 882-pound stated capacity, adjustable fork heads, and a rust-resistant powder-coated finish.

A black powder-coated steel frame is the SPECSTAR combo's defining practical feature, providing rust-resistant protection for a stand set used around a garage or workshop. Its front-and-rear configuration enables lifting at either end, while the listed 882-pound capacity gives buyers a clear load limit to consider.

SPECSTAR identifies adjustable fork heads, which can help owners set the front support to their motorcycle rather than rely on a fixed head position; the supplied information does not specify an adjustment range. The powder-coated alloy-steel frame is described as rustproof, supporting repeated garage use, and the front/rear combo gives one set two lifting roles. At 19.8 pounds, it remains a tangible item to handle when positioning or storing the stands; confirm the bike's load is within the stated 882-pound capacity.

Skip it if you need a specified wide height range for maintenance; the VIVOHOME VH012 scissor jack lists lifting from 3.5 to 14.5 inches.

Choose this SPECSTAR combo if you want adjustable fork heads and a powder-coated steel frame for front-and-rear lifting. Its listed capacity is 882 pounds, and the fork-head adjustment range is unspecified.

Listed on Amazon as: SPECSTAR Motorcycle Stands 882 Lbs Capacity, Red

#5

5. porotmotor Front Rear Stands

• Material: Alloy Steel

Best for: Quick-assembly combo stand setup.

Why it ranks #5: This 850-pound front-and-rear paddock set includes four adapter types and a quick-assembly design, but listed specifications provide limited fit measurements.

A few screws are all the supplied description says are needed for assembly, making this porotmotor front-and-rear combo a quick setup option for parking, maintenance, or cleaning. Its listed 850-pound capacity and four types of adapters provide additional selection points for owners assessing support needs.

The extended handle and non-slip wheels are described as supporting effortless lifting, while quick assembly with only a few screws can reduce setup effort before use. Four adapter types give the combo multiple support options, though the supplied details do not identify their individual shapes or dimensions. The product title states an 850-pound front-and-rear capacity and positions the stands for parking, maintenance, and cleaning. Since the materials do not give adjustment ranges, buyers should treat adapter choice and motorcycle support-point compatibility as practical checks.

Skip it if you need listed front and rear head-width ranges; the VEVOR TD-003-05WFR specifies adjustable dimensions for its three fork heads.

This porotmotor combo suits owners who value quick assembly and multiple adapter types for parking or routine motorcycle work. Its 850-pound stated capacity is clear, but adapter dimensions are not provided.

Listed on Amazon as: Motorcycle Stands Front Rear, 850lbs Front and Rear Combo Stand Lift with 4 Types of Adapters, Universal Motorcycle Paddock Stands Wheel Lift Stands for Parking, Maintenance, Cleaning

#6

6. Garvee 900 lb Stands

• Weight: 20.7 lb

Best for: Reinforced 900-pound combo support.

Why it ranks #6: Its steel front-and-rear stand set is rated for 900 pounds and includes non-slip pads and reinforced triangular force points for stable lifting.

Reinforced triangular force points distinguish the Garvee front-and-rear stands, helping create a stable, shake-free lifting structure alongside precision bracket joints and non-slip pads. The 900-pound capacity offers a clear load ceiling for owners considering a sturdy garage stand for compatible motorcycles, bikes, or ATVs.

The steel frame carries a rust-resistant powder coating, which supports use in a garage where a stand may be stored between maintenance sessions. Precision bracket joints, reinforced triangular force points, and non-slip pads are specifically cited for stable, shake-free lifting, linking the structure to a steadier support setup. Its 900-pound rating is stated for most motorcycles, bikes, and ATVs. The listed dimensions are 21.26 by 21.26 by 5.12 inches, a useful footprint reference when planning where the stand will be stored.

Skip it if you need a listed capacity above 900 pounds; the VEVOR TD-003-05WFR front-and-rear combo supports up to 1,100 pounds.

This Garvee combo suits owners who prioritize reinforced, non-slip support for a motorcycle or ATV within its 900-pound limit. Its 21.26-inch square listed dimensions also help gauge storage-space needs.

Listed on Amazon as: Garvee 900LBS Heavy Duty Motorcycle Front and Rear Stands

#7 · Detachable Stand

7. BIG RED Dirt Bike Stand

• Dimensions: 14.56 x 15.74 x 15.35 in
• Weight: 4.4 kg
• Material: Alloy Steel

Best for: Detachable dirt-bike storage stand.

Why it ranks #7: This steel dirt-bike stand supports up to 1,000 pounds and detaches for storage or transport, but it is not a front-and-rear combo.

A detachable structure makes the BIG RED dirt-bike stand easier to assemble, transport, and put away, enabling compact handling between maintenance sessions. Its steel construction, rubber non-slip surface, and stated 1,000-pound capacity define the support setup for owners seeking a simple platform-style stand.

The detachable design supports quick assembly and disassembly, which can make carrying or storing the stand more manageable than keeping it assembled. A rubber mat with a non-slip treatment covers the surface, intended to help prevent the motorcycle from slipping while supported. The title and specifications state a 1,000-pound maximum capacity, although the additional description also states 450 pounds, creating conflicting load information buyers should resolve before relying on a limit. Its 14.56-by-15.74-by-15.35-inch dimensions provide a storage reference.

Skip it if you need an unambiguous stated load limit before selecting a stand; the VEVOR TD-003-05FR specifies an 850-pound capacity.

This BIG RED stand suits dirt-bike owners who value a detachable platform and non-slip rubber surface for storage or maintenance. Resolve the conflicting 1,000- and 450-pound capacity statements before use.

Listed on Amazon as: Big RED 1000lb Capacity Dirt Bike Stand, Universal, Detachable Maintenance Motorcycle Lift for Kawasaki, Honda, Yamaha, Silver

#8

8. VIVOHOME Scissor Lift

• Dimensions: 14.6 x 9 x 3.5 in
• Weight: 12.5 kg
• Material: Alloy Steel

Best for: Adjustable-height scissor lifting.

Why it ranks #8: The scissor jack has a 1,100-pound capacity and a 3.5-to-14.5-inch lift range, suited to supporting a bike rather than rolling it for storage.

A 3.5-to-14.5-inch lifting range is the VIVOHOME scissor jack's key advantage, enabling users to raise a motorcycle or ATV to a chosen working height. Its 1,100-pound capacity, wide platform, and adjustable screw adapters make it a distinct alternative to separate wheel stands.

The heavy-duty alloy-steel scissor mechanism supports up to 1,100 pounds and adjusts from 3.5 to 14.5 inches, so the same jack can serve different maintenance heights for engine, transmission, or wheel work. A reinforced crank handle controls raising and lowering manually, while adjustable screw adapters help balance the jack on uneven floors. Its wide anti-slip platform is noted in the supplied description, supporting contact at the lift surface. The listed compatible vehicles include motorcycles and snowmobiles, with additional facts naming dirt bikes, ATVs, and Harleys.

Skip it if you need to roll a parked motorcycle around the garage rather than raise it; the SUNROAD motorcycle dolly has five swivel casters.

The VIVOHOME jack suits owners seeking adjustable-height support for motorcycle, ATV, or snowmobile maintenance. Its 14.5-inch maximum height and 1,100-pound limit are the key boundaries to check.

Listed on Amazon as: VIVOHOME 1100 LBS Motorcycle Lift Scissor Jack, Wide Deck Hoist Stand, Red

#9

9. Orion Motor Tech Scissor Jack

• Dimensions: 1.57 x 10.24 x 4.33 in
• Weight: 12.8 kg
• Material: Rubber, Steel

Best for: Manual scissor-jack maintenance.

Why it ranks #9: This 1,100-pound manual scissor jack lifts from 3.7 to 14.6 inches, but its maintenance-focused design offers no listed rolling storage feature.

The OMT jack raises from 3.7 to 14.6 inches using either its T-handle or a 3/8-inch socket and ratchet, giving owners two manual ways to set working height. Its 1,100-pound capacity and scissor format suit maintenance support for cruisers, dirt bikes, and other motorcycles.

Manual lifting through the T-handle or a compatible 3/8-inch socket and ratchet lets the owner choose a familiar tool for height adjustment, while the listed 3.7-to-14.6-inch range covers a broad span of lift positions. The 1,100-pound capacity supplies a clear load boundary for motorcycle support. Included items are a safety bar, socket, chain brush, gloves, and instructions, adding task-related accessories to the jack package. The supplied guidance recommends manual operation to extend screw life and reduce wear.

Skip it if you need an explicitly stated 3.5-inch minimum lift height; the VIVOHOME VH012 lists a 3.5-to-14.5-inch range.

This OMT jack fits riders who want manual, adjustable-height motorcycle support and useful included accessories. Keep its 1,100-pound limit in view, and follow the manual-operation recommendation for screw life.

Listed on Amazon as: OMT 1100lb Motorcycle Scissor Lift Jack Wide Deck Motorbike Hoist Stand

#10

10. Jack Boss Rear Combo Stand

• Weight: 11.58 lb

Best for: Compact rear paddock lifting.

Why it ranks #10: The rear paddock stand supports 500 pounds and reaches 12.6 inches, but its lower capacity and rear-focused setup make it less versatile for storage.

Four PP caster wheels are the defining detail on this Jack Boss rear stand, providing a rolling base intended to add stability as the motorcycle is lifted. Its 500-pound capacity and 12.6-inch lift height give sport-bike owners specific boundaries for judging whether it fits their storage and maintenance routine.

The industrial-grade steel construction has a red powder-coated finish described as corrosion resistant and resistant to deformation, a useful combination for a stand kept in a garage. The listed 500-pound capacity and 12.6-inch height clarify the support limit and lift target, while the four PP casters are specified to add stability. The included U-shaped front-fork and L-shaped rear-stand parts offer two support configurations, though buyers should select the one suited to their motorcycle's lifting points.

Skip it if you need a higher listed load limit; the VEVOR TD-003-05WFR combo supports up to 1,100 pounds.

This Jack Boss stand suits riders whose motorcycle falls within its 500-pound limit and who value a caster-equipped lifting base. Its listed lift height is 12.6 inches, so consider that boundary for your work.

Listed on Amazon as: Jack Boss Motorcycle Stand Rear Combo Wheel Lift Stand, 500Lbs Capacity,Swingarm Spool Paddock Stand for Sport Bike,Fit for Yamaha, for Honda, Suitable for Kawasaki Black