Best Risers For Motorcycle Handlebars for Different Bar Sizes

#1 · Best Overall

1. beyisi 7/8-Inch Risers

• Material: Aluminum
• Material Type: Aluminum
• Weight: 0.35 kg

Best for: Adjustable 22mm positioning.

Why it ranks #1: Raises 22mm bars about 30mm and adds 20mm of backward extension; 6063-T6 aluminum and included M8 bolts make the adjustment clearly specified.

A stated 30mm rise paired with 20mm of backward adjustment gives these beyisi risers a useful combination for riders changing both handlebar height and reach. They fit 7/8-inch (22mm) bars, and the listing names applications ranging from the Grom MSX125 and CRF 250L to the KLR650.

The 30mm rise and 20mm backward extension let riders adjust bar position in two directions, with the listing connecting that adjustment to sitting posture and riding comfort. Their 6063-T6 billet aluminum construction and anodized surface treatment provide the specified material and finish. Before installation, check stock wiring, brake hose, and clutch cable length, as the listing specifically calls this out. The 7/8-inch clamp fit excludes 1-inch and larger bars.

Skip it if you need a riser for 1-inch bars; KEMIMOTO's 1-inch risers, B071DPZ7Z3, match that diameter.

This suits a 7/8-inch-bar rider seeking a measured rise and backward reach adjustment, particularly on a listed motorcycle or ATV. Check cable and hose slack before installation; compatibility depends on the bike's available lengths.

Listed on Amazon as: 7/8'' 22mm Motorcycle ATV Dirt Bike Handlebar Risers With Clamps, Fit for Grom MSX125 / CRF 250L, KLR650, FZ1 / FZ8 / TW, DRZ 400/S/V-Strom (Black)

#2 · Most Adjustable

2. Feiteplus 7/8-Inch Risers

• Material: Alloy Aluminum
• Material Type: Alloy Aluminum
• Weight: 0.42 kg

Best for: Adjustable 7/8-inch reach and rise.

Why it ranks #2: Fits 22mm bars and offers a 38mm rise with 18mm of forward or backward adjustment; check its stated M8 bolts and 33–35mm hole spacing.

A 38mm rise paired with 18mm of forward-or-backward adjustment gives these Feiteplus risers a broad range of bar-position change for 7/8-inch motorcycles. Billet aluminum and an anodized finish supply the listed construction details, while the fit notes specify M8 installation bolts.

The 38mm height increase and 18mm adjustment in either direction give riders options for changing handlebar position, which the listing connects to comfort and reduced fatigue on long drives. Billet aluminum construction and an anodized surface finish are specified. Fit checks include 22mm bar diameter, M8 installation bolts, and 33–35mm installation-hole distance, so checking all three measurements helps establish whether the adjustable risers match the motorcycle's mounting setup.

Skip it if you have 1-inch handlebars; KEMIMOTO's 1-inch risers, B071DPZ7Z3, match that bar diameter.

Choose these for a 7/8-inch setup where a 38mm rise and adjustable reach are useful. Before buying, compare the handlebar diameter, M8 bolt requirement, and stated hole spacing with your motorcycle's mounting points.

Listed on Amazon as: 7/8" Universal Handlebar Bar Risers Motorcycle Bar Clamps 7/8" Bar For Motorbike Pit Dirt Bikes Black Riser Height 38mm (1.5 "), 18mm (0.71") Backward or Forward

#3 · Best For 1 1/8-Inch Bars

3. Tusk 2-Inch Pivoting Risers

• Material: Aluminum
• Material Type: Aluminum

Best for: Pivoting 1 1/8-inch bar adjustment.

Why it ranks #3: Designed for 1 1/8-inch handlebars and provides a 2-inch rise with forward-or-backward positioning for riders who need a larger adjustable move.

A two-inch rise with forward-or-backward pivot adjustment lets TUSK riders tune both height and bar position rather than choosing a fixed orientation. The risers fit 1 1/8-inch handlebars and use existing bar mounts, making them a focused option for compatible motorcycle and dirt-bike setups.

The two-inch rise and pivoting forward-or-backward positioning provide a way to set a more upright posture or a custom bar position, which the listing links to control and reduced fatigue on long rides. Compatibility is specifically stated for 1 1/8-inch bars, and the risers use existing bar mounts. Since handlebars are not included, buyers should plan to use their own compatible bars; the stated fit does not cover other diameters.

Skip it if you need risers for 7/8-inch bars; beyisi's MRI-1685, B0D4V3JG4L, fits 22mm handlebars.

Choose these for a 1 1/8-inch-bar setup where a two-inch rise and adjustable fore-aft position suit your riding posture. This is a riser-only purchase, so provide compatible handlebars separately and confirm your bar diameter.

Listed on Amazon as: Tusk 2" Pivoting Bar Risers for Motorcycle & Dirt Bike – 1 1/8" Bar Clamp to 1-1/8" Handlebars – Universal Fit, Black

#4 · Best Model-Specific Kit

4. Tusk 30mm Riser Kit

• Material: Aluminum
• Material Type: Aluminum

Best for: TUSK billet riser kit.

Why it ranks #4: Offers 15mm or 30mm height increases with billet 6061-T6 spacers and 12.9-strength chromoly steel bolts; fitment depends on its guide.

Billet 6061 T-6 aluminum spacers paired with 12.9 tensile-strength chromoly steel bolts define this TUSK riser kit. Its stated height options—15mm or 30mm—let riders choose between two increments, while the fitment guide is the necessary reference for matching the kit to a specific motorcycle or ATV.

The kit raises handlebars by either 15mm or 30mm, giving riders two specified height changes to consider for their setup. Billet 6061 T-6 aluminum spacers provide the listed spacer material, while the included 12.9 chromoly steel bolts complete the mounting hardware. TUSK lists risers for both 7/8-inch and 1 1/8-inch handlebars, but this particular kit's fitment should be checked against the fitment guide image before installation.

Skip it if you need a listed, adjustable backward extension; beyisi's MRI-1685, B0D4V3JG4L, specifies a 20mm rearward adjustment.

This suits riders choosing a modest 15mm or 30mm height increase and wanting the specified aluminum spacers and chromoly bolts. Use the fitment guide to verify your machine and the appropriate handlebar-size version.

Listed on Amazon as: Tusk Motorcycle Handlebar Risers – 30mm Rise, Billet 6061-T6 Aluminum

#5

5. KEMIMOTO 7/8-Inch Risers

• Material: Aluminum
• Material Type: Aluminum

Best for: 7/8-inch dirt-bike and ATV fit.

Why it ranks #5: CNC aluminum risers suit 7/8-inch bars and list fitment examples across dirt bikes, ATVs, Kawasaki, Suzuki, and select Triumph models.

A 7/8-inch handlebar fit is the defining feature of these KEMIMOTO risers, opening up a broad choice for compatible dirt bikes and ATVs. CNC aluminum construction adds a specific material advantage for riders seeking an aluminum riser, while the listed fit examples include Kawasaki, Suzuki, and Triumph models.

These risers are specified for 7/8-inch handlebars, and the listing names dirt bikes, ATVs, and examples including the Kawasaki KLR650 and Triumph Tiger 800 XC. That makes handlebar diameter the key first check before considering a particular machine. CNC aluminum construction provides the listed material basis, while the application manual offers a reference for checking adaptation. The listing explicitly rules out 1-inch, 1 1/8-inch, and 1 1/4-inch bars, so sizing determines whether this option is usable.

Skip it if you have 1-inch or 1 1/8-inch bars; KEMIMOTO's 1-inch risers, B071DPZ7Z3, suit the former diameter.

Choose this KEMIMOTO set for a compatible 7/8-inch dirt bike, ATV, or listed motorcycle application where aluminum construction matters. Measure the bar first: the specified diameter excludes several common larger bar sizes.

Listed on Amazon as: KEMIMOTO 7/8 Inch Motorcycle Handlebar Risers, Aluminum Alloy Motorcycle Risers, Compatible with Kawasaki Suzuki WR250F TW200, fit ATV Dirt Bike, Universal Motorcycle Accessories, Black

#6

6. CILOYU 22mm Risers

• Material: Metal
• Material Type: Metal
• Weight: 0.36 kg

Best for: Silver 22mm dirt-bike fit.

Why it ranks #6: A 22mm option for motorcycles, dirt bikes, ATVs, and scooters; its listed 10mm fixing bolt diameter helps buyers check mounting compatibility.

Compatibility with 22mm (7/8-inch) handlebars across motorcycles, dirt bikes, ATVs, and scooters gives this CILOYU set broad stated vehicle coverage. Its aluminum-alloy construction and specified 10mm fixing bolt diameter add practical details for riders comparing mounting hardware and fit before installation.

The 22mm handlebar fit is the central compatibility requirement, with listed examples including XT600, XR50, Ninja 500, and Coleman BT200X. The 10mm fixing bolt diameter gives buyers another mounting dimension to check against their setup. Aluminum alloy is specified for the risers, and the listing describes them as durable. This combination makes diameter and bolt sizing the key pre-install checks; the product is not specified for other handlebar sizes.

Skip it if you need a 1-inch-bar riser; KEMIMOTO's 1-inch model, B071DPZ7Z3, fits that diameter instead.

This is a fit-focused choice for a 22mm-bar dirt bike, ATV, scooter, or motorcycle, especially among the listed examples. Check both handlebar and fixing-bolt dimensions against your setup before installation.

Listed on Amazon as: Motorcycle 22mm 7/8 Handlebar Risers Mount Clamps for Dirt Pit Bike

#7

7. KEMIMOTO 1-Inch Risers

• Material: Aluminum
• Material Type: Aluminum
• Weight: 48 kg

Best for: One-inch motorcycle and ATV bars.

Why it ranks #7: Fits 25mm bars and uses forged 6061-T6 aluminum, with stated dimensions of 72mm long and 50mm wide; its rise amount is not specified.

A 25mm (1-inch) handlebar bore makes this KEMIMOTO riser a clear option for riders whose bars are larger than 7/8 inch. Forged 6061 T-6 aluminum provides its specified construction, and the listing identifies motorcycles, ATVs, and dirt bikes as applications for this diameter.

The 25mm bore targets 1-inch bars, while the listed 72mm overall length and 50mm width give buyers useful dimensions to compare with their mounting area. Forged 6061 T-6 aluminum is the stated material, making construction a relevant consideration when choosing a riser. The product is identified for motorcycles, ATVs, and dirt bikes, with examples including Kawasaki KLR650 and Ninja 650R. Measure the bar diameter first: this model is not the 7/8-inch option.

Skip it if you have 7/8-inch bars; KEMIMOTO's 7/8-inch risers, B073QNBPC6, fit that smaller diameter.

Consider this model for a motorcycle, ATV, or dirt bike with 1-inch bars when its stated dimensions suit your mount. Its central fit boundary is simple: confirm the bar measures 25mm before choosing it.

Listed on Amazon as: KEMIMOTO 1 Inch Motorcycle Handlebar Risers, Aluminum Alloy Motorcycle Risers, Compatible with Sportster Softail Dyna V-star Shadow, Universal Motorcycle Accessories, Black

#8 · Best Harley Pullback

8. Americruise 3.5-Inch Risers

• Weight: 1.14 lb

Best for: Harley 1-inch pullback riser.

Why it ranks #8: A Harley-oriented 1-inch-bar kit raises the bars 3.5 inches and pulls them back 1 inch, making it a specialized rather than broad-fit option.

A 3.5-inch rise combined with a one-inch pullback gives this Americruise kit a substantial change in bar height and reach for compatible Harley models. The listing names Dyna, Street Bob, and Softail applications, and specifies CNC aluminum construction with a chrome finish.

The stated 3.5-inch rise and one-inch backward pull move handlebars both upward and toward the rider, a configuration the listing associates with comfort on long trips. The kit includes a top clamp and is specified for 1-inch bar diameter, with fitment examples including Dyna, Street Bob, and Softail models. CNC aluminum is the stated material. Confirm the bar diameter and motorcycle application before installation, since the listing's compatibility is not universal across all bikes.

Skip it if you want a straight 4-inch riser for Harley 1-inch bars; YDLMT's SB-20-068-02, B0DT6JN14G, specifies that setup.

Consider this for a compatible Harley rider seeking a pronounced rise plus backward reach, particularly on a listed Dyna, Street Bob, or Softail. The 1-inch bar requirement and motorcycle fitment are the boundaries to check.

Listed on Amazon as: 1 Set 3-1/2'' Motorcycle Handlebar Risers and 1'' Pullback with Top Clamp Kit Compatable for 1'' Bar Diameter Harley Dyna Heritage Softail Fat Boy Sposter Touring Glide (Chrome)

#9

9. Feiteplus 5.51-Inch Risers

• Material: Aluminum
• Material Type: Aluminum
• Weight: 0.87 kg

Best for: Tall one-inch cruiser bars.

Why it ranks #9: Raises 1-inch bars 5.51 inches and lists compatibility with Harley, Victory, and other cruiser-style motorcycles; the substantial height narrows its use.

A 5.51-inch height increase makes this Feiteplus riser a tall option for motorcycles with one-inch bars, including the listed Harley, cruiser, chopper, metric, and Victory applications. Its CNC billet aluminum construction and specified 173mm overall height give buyers concrete material and dimension details to assess.

The listed 140mm (5.51-inch) rise substantially changes handlebar height, while the 173mm overall height helps buyers compare the part with their intended setup. A 25mm bore targets one-inch handlebars, and the listing names Harley Davidson, cruisers, choppers, metrics, and Victory cruisers with that bar diameter. CNC billet aluminum and an anodized surface finish are specified. Measure the bar and consider the tall overall profile before selecting this riser.

Skip it if you want a two-inch pivoting rise; TUSK's 215818, B0FH7FJF1S, offers that adjustment for 1 1/8-inch bars.

This is for a cruiser or other listed motorcycle with one-inch handlebars when a tall 5.51-inch rise suits the desired position. The fixed height and 25mm bore are key boundaries to weigh against your setup.

Listed on Amazon as: 1" Handlebar Bar Risers Motorcycle Bar Clamps For Streetbob, Goldfire Straight One Piece Tall Handle Bar Riser Extension Kit Compatible With Harley Chrome. 5.51" Raise

#10

10. YDLMT 4-Inch Risers

• Material: Aluminum
• Material Type: Aluminum
• Weight: 310 g

Best for: Straight four-inch Harley riser.

Why it ranks #10: A narrow Harley-style choice for 1-inch handlebars with 4-inch height; it requires separately purchased 1/2-13 riser bolts and compatible mounting points.

A four-inch straight rise and fitment for Harley applications with one-inch handlebars make this YDLMT riser a tall, specific option. Its 3-1/2-inch on-center mount design and compatibility with most OEM-style top clamps with offset mount holes help define the mounting setup it supports.

The four-inch height targets riders seeking a substantial bar lift, while the stated 3-1/2-inch on-center mount spacing identifies the application geometry to check. It is drilled and tapped for 1/2-inch-13 riser bolts, but those bolts are sold separately, so installation requires sourcing them. The riser fits Harley applications with one-inch bars and accepts most OEM-style top clamps with offset mount holes, making clamp and mount details important fit checks.

Skip it if you need a complete bolt-in riser kit; Americruise's AM-HanBarRis-25, B0F2B1XPK3, includes a top clamp.

This suits Harley riders with one-inch bars seeking a straight four-inch rise and matching mount geometry. Check the 3-1/2-inch spacing and top-clamp style, and plan separately for the specified bolts, which are not included.

Listed on Amazon as: Chrome Motorcycle 4 inch Straight Handlebar Riser Fit for Harley 1" Handlebars Dyna Street bob Heritage Softail Sportster XL 883 1200