Best Power Trim For Outboard: Compare 10 Fitment Options

#1 · Best Overall

1. RisWhiteMeteors 8M0055011

Best for: Mercury 40–60 HP replacement.

Why it ranks #1: Specifically fits Mariner and Mercury 40–60 HP outboards, lists three replacement numbers, and is described as a direct-replacement electric-hydraulic assembly.

The electrically hydraulic assembly’s direct-replacement positioning for Mariner and Mercury 40–60 HP outboards makes it a focused option for restoring powered trim and tilt in that engine range. It replaces listed OE numbers 830150T10, 8M0055006, and 8M0055011, helping buyers identify the intended replacement.

Electric operation powers the hydraulic lifting action, while the listing describes smooth lifting, strong power, and stable operation—useful when raising or adjusting a compatible motor. Its stated 40–60 HP Mariner and Mercury fitment keeps the choice specific, and the three listed OE numbers provide additional identification points. The package contains one assembly, described as ready for installation and tested before shipment. Marine-grade, corrosion-resistant construction is also relevant for a component used in a marine environment.

Skip it if you need a replacement for an engine outside the listed Mariner and Mercury 40–60 HP range; the Winibo QX90 covers outboards up to 90 HP.

A Mercury or Mariner owner seeking an electrically powered trim-and-tilt replacement within the stated 40–60 HP range should consider this assembly. Match the engine and OE number carefully; its listed fitment does not cover every outboard.

Listed on Amazon as: 8M0055011 830150T10 8M0055006 Electrically Hydraulic Power Trim &Tilt Compatible with Mariner Mercury Outboard 40-60HP

#2 · Best Mercury Fitment

2. Winibo TT-ME-60HP

• Weight: 11.2 lb

Best for: Mercury four-stroke engine match.

Why it ranks #2: Lists Mercury F35, F40, F50, and F60 four-stroke compatibility, replacement numbers, a 1-year warranty, and a 11.2-pound assembly.

Compatibility with Mercury F35, F40, F50, and F60 four-stroke engines gives this Winibo assembly a clearly defined fit range, while its listed replacement numbers help identify the part. The powered tilt adjustment is intended to improve engine positioning and support more stable, balanced navigation.

The assembly’s compatibility with Mercury F35–F60 four-stroke models gives owners a concrete engine range to check before selecting a replacement. Listed numbers 8M0055011, 893517T01, 855654T09, 855654T08, and 855654T4 offer additional part-identification references. Winibo says precise tilt adjustment can minimize turbulence and vibration, supporting vessel balance and propeller propulsion efficiency. The alloy-steel and aluminum construction is described as corrosion-resistant, a relevant consideration for marine use.

Skip it if you run an outboard above 60 HP; Winibo QX90 is listed for engines up to 90 HP and may suit that larger-engine requirement.

Mercury four-stroke owners within the F35–F60 range seeking powered tilt adjustment have a defined compatibility and replacement-number list to consult. Check the exact engine model before choosing; the stated fitment does not extend beyond that range.

Listed on Amazon as: 8M0055011 Outboard Power Tilt & Trim Assembly up to 60HP

#3 · Best Yamaha Fitment

3. EZAPEX Yamaha 65W-43800

Best for: Yamaha 25–45 series replacement.

Why it ranks #3: Names Yamaha 2-stroke and 4-stroke applications, including 25J, 30D, 40X, F20A, F25, and F45A, plus multiple replacement numbers.

Fitment across specified Yamaha two- and four-stroke models is the main distinction of this EZAPEX power tilt trim unit. It covers listed 25J, 30D, 40X, and E40X two-stroke engines, plus F20A, F25, F25A, and F45A four-stroke engines, with multiple replacement-number references.

The separate two-stroke and four-stroke fitment lists help Yamaha owners narrow compatibility by engine model rather than relying on a broad horsepower range. The unit replaces several listed numbers, including 65W-43800-01-4D, -02-4D, and -03-4D, as well as additional 4D and 8D references. Its stated function is powered tilt and trim, and the package includes one power tilt trim unit. Matching the engine model and replacement number is central to selecting this part.

Skip it if you need a unit for a non-Yamaha engine; Vrtfil’s Power Tilt Trim Unit lists compatibility across several outboard brands up to 90 HP.

Yamaha owners matching one of the listed two- or four-stroke models can use the replacement-number list to assess this unit. Its model-specific fitment makes exact engine identification important before choosing.

Listed on Amazon as: 65W-43800-02-4D Power Tilt Trim Unit for Yamaha Outboard 2 & 4 Stroke

#4 · Broadest Engine Range

4. Aspaton 8M0171818 Assembly

• Weight: 12.13 lb

Best for: Midrange Mercury assembly replacement.

Why it ranks #4: Lists F75 through F115 models and 65–125 HP applications, with replacement numbers 8M0171818 and 8M0090335.

The supplied F75, F80, F90, F100, and F115 model list gives this Aspaton power trim assembly a defined compatibility focus. It also cites replacement numbers 8M0171818 and 8M0090335, helping owners compare the assembly against existing part references before planning a replacement.

Aspaton lists compatibility with F75, F80, F90, F100, and F115 models, alongside a broader stated range of 65–125 HP and 1998–2024 fitment. Those details offer multiple starting points for checking an engine, while replacement numbers 8M0171818 and 8M0090335 support part identification. The package contains one power trim assembly, weighing 12.13 pounds. The listing describes smoother operation under different sailing conditions, but matching the specific boat and engine remains essential.

Skip it if you need a specified Yamaha 50–90 HP trim motor with wiring details; VRIWOY 6H1-43880-02-00 lists that motor configuration.

Owners whose engine matches the listed F-series models or stated 65–125 HP range can consider this single replacement assembly. Check the specific boat and engine against the fit details before choosing.

Listed on Amazon as: 8M0171818 8M0090335 Marine Power Trim Assembly

#5 · Best Small-Motor Fit

5. T-H Marine CMC PT-35

• Weight: 24 lb

Best for: Clamp-on motors up to 35 HP.

Why it ranks #5: Rated for motors up to 35 HP, provides 84 degrees of trim and tilt, and accommodates clamp-on or bolt-on motors without an adapter.

The PT-35’s ability to accommodate clamp-on or bolt-on motors without an adapter is its most useful differentiator for smaller outboards. Rated for motors of 35 HP and below, it also provides 84 degrees of trim and tilt, giving owners a stated movement range to consider when planning powered engine positioning.

The no-adapter accommodation for clamp-on or bolt-on motors can simplify fit planning for owners whose mounting style matches either option. Its 5.5-inch setback is specified to enhance stability and performance, while 84 degrees of trim and tilt gives a defined adjustment range. Aluminum construction with stainless-steel fasteners identifies the materials used. Electric hydraulic operation provides powered tilt and trim, which the listing connects with better handling and reduced manual back strain.

Skip it if you have an engine above 35 HP; Vrtfil’s Power Tilt Trim Unit is listed for outboards up to 90 HP.

Owners of outboards up to 35 HP with clamp-on or bolt-on mounting can assess this PT-35’s no-adapter accommodation, setback, and adjustment range. Its engine rating is a firm boundary for larger-motor buyers.

Listed on Amazon as: T-H Marine – 3002.1017 52100 CMC PT-35 Tilt and Trim for up to 35 HP

#6

6. Bzcovac PT-35

• Weight: 19.5 lb

Best for: Small-motor shallow-water tilting.

Why it ranks #6: Targets motors up to 35 HP and includes a wiring kit; its listed 5.5-inch setback supports buyers seeking a PT-35-style unit.

A 51⁄2-inch setback is the defining feature of this PT-35 tilt-and-trim unit, intended to improve boat stability and help the prop get a better bite at a higher setting. Its switch-activated lift can also raise the motor to help protect the prop in shallow water or around debris.

The 51⁄2-inch setback is specified as a stability and prop-bite aid, giving this unit a practical role in a setup where prop position matters. Switch activation raises the motor, which can help protect the prop from shallow-water or debris damage and avoid manual lifting strain. The PT-35 is rated for up to 35 HP, and the package lists a wiring kit alongside the aluminum tilt-and-trim unit for installation planning.

Skip it if you operate an outboard above 35 HP; the Winibo QX90 is listed for outboards up to 90 HP instead.

Owners of motors up to 35 HP who want powered tilting, a 51⁄2-inch setback, and help avoiding manual lifting strain may find this PT-35 relevant. Keep its engine-capacity ceiling and transom setup in mind.

Listed on Amazon as: 3002.1017 52100 for CMC PT-35 Tilt and Trim up to 35 HP – Outboard Motor Electric Hydraulic Power Trim & Tilt Unit

#7

7. Winibo QX90

• Weight: 32 lb

Best for: Higher-capacity jack-plate setup.

Why it ranks #7: Rated up to 90 HP and lists a 330-pound load capacity, aluminum-alloy and stainless-steel materials, and a 1-year warranty.

A 330-pound load capacity is the clearest differentiator of Winibo’s electric power tilt trim jack plate, giving boat owners a stated capacity figure to consider when selecting a powered transom setup. The unit is listed for outboards up to 90 HP and is made with aluminum alloy and stainless steel.

The electric jack-plate style combines powered tilt and trim with a stated 330-pound load capacity, which helps buyers assess the listed capacity alongside their boat setup. Its up-to-90-HP compatibility sets an engine-size boundary, while the aluminum-alloy and stainless-steel materials identify the construction. At 32 pounds and 18.5 by 16.9 by 10.2 inches, the unit’s weight and dimensions are relevant when planning transom installation and handling.

Skip it if you need a listed assembly for a specific Mercury 40–60 HP replacement; RisWhiteMeteors 8M0055011 identifies that narrower engine range and OE numbers.

Boat owners considering an electric jack plate for an outboard up to 90 HP can use the stated capacity, materials, and dimensions to assess the setup. Account for its 32-pound weight and transom installation needs.

Listed on Amazon as: Power Tilt and Trim Unit for Outboard Motor Up to 90HP (Gray)

#8

8. RisWhiteMeteors Hydraulic Lift

Best for: Helm-access push-button control.

Why it ranks #8: Fits outboards up to 90 HP and includes a push-button switch, but the supplied data gives no specific replacement part numbers.

An included push-button switch that can be mounted near the helm or on the tiller handle is the key convenience feature of this RisWhiteMeteors actuator. It lets the operator raise or lower a compatible motor from a chosen control location, while the listing specifies support for outboards up to 90 HP.

The included push-button switch allows raising or lowering the motor and can be positioned near the helm or tiller handle, supporting convenient access while operating. Electric operation powers the lift, and the stated maximum of 90 HP provides an engine-size boundary. Compatibility information names Yamaha, Honda, Evinrude, Mercury, Suzuki, OMC, Mariner, Johnson, Tohatsu, Nissan, and Mercruiser. The listing recommends professional installation for people unfamiliar with hydraulic systems or marine engine rigging.

Skip it if you are comfortable selecting a specified Mercury 40–60 HP assembly by OE number; RisWhiteMeteors 8M0055011 lists those replacement references.

A boat operator who wants an accessible push-button control for raising and lowering an outboard up to 90 HP should consider this unit. Plan for professional installation if hydraulic systems or marine rigging are unfamiliar.

Listed on Amazon as: Power Tilt Trim Unit for Outboard Motor up to 90HP, Electric Hydraulic Lift Jack Plate, Marine Transom Actuator for Boats, IP68 Waterproof, Black

#9

9. Vrtfil Power Tilt Trim Unit

• Weight: 34.8 lb

Best for: Multi-brand 90 HP actuator.

Why it ranks #9: Lists compatibility with 15–90 HP engines across several brands and an IP68 waterproof claim, but provides little model-specific fitment detail.

The listed IP68 waterproof rating sets this Vrtfil electric hydraulic tilt-and-trim unit apart for buyers seeking a water-protection specification in a transom actuator. Its title gives an upper limit of 90 HP, and the supplied compatibility information names Yamaha, Honda, Evinrude, Mercury, Suzuki, OMC, Mariner, Johnson, Tohatsu, Nissan, and Mercruiser.

The IP68 rating and electric hydraulic jack-plate format identify the unit’s stated water protection and powered lifting approach, useful considerations for choosing marine transom hardware. Its listed compatibility spans multiple named brands and engines up to 90 HP, giving owners a broad starting point for checking fit. At 34.8 pounds, the unit’s weight is relevant for handling and installation planning. The package is listed as one unit; no additional components are specified in the supplied details.

Skip it if you need a listed Mercury 40–60 HP OE-number replacement; RisWhiteMeteors 8M0055011 specifies that range and replacement numbers.

A boat owner comparing a multi-brand actuator for an outboard up to 90 HP can weigh the IP68 rating and 34.8-pound handling requirement. Check the specific engine against the supplied brand compatibility information before selecting it.

Listed on Amazon as: Power Tilt Trim Unit, Electric Hydraulic Jack Plate for Outboard Motor, Marine Transom Actuator, IP68 Waterproof Black, Fits Up to 90 HP Outboard Engines

#10

10. VRIWOY 6H1-43880-02-00

• Weight: 3.03 lb

Best for: Yamaha 50–90 HP motor replacement.

Why it ranks #10: This is a replacement trim motor, not a complete power-trim assembly; it lists Yamaha 50–90 HP fitment and 12-volt, 2-wire specifications.

A 12-volt, two-wire, three-bolt motor configuration defines this VRIWOY replacement for Yamaha 50–90 HP engines. The listed 6H1-43880-02-00 part number replaces two earlier references, while ring terminals are specified, giving repairers concrete electrical and mounting details to compare with the motor being replaced.

The 12-volt, two-wire configuration and three-bolt mount give repairers specific electrical and mounting details to check when replacing a compatible motor. Ring terminals are included in the stated configuration, and the listed replacement numbers are 6H1-43880-00, 6H1-43880-01, and 6H1-43880-02-00. It is specified for Yamaha 50–90 HP two- and four-stroke engines. Marine-grade construction is described as suitable for harsh saltwater conditions, while engine-series fitment still needs careful checking.

Skip it if you need a complete Yamaha tilt-and-trim unit rather than a motor; EZAPEX 65W-43800-02-4D is listed as a power tilt trim unit.

A repairer replacing a Yamaha trim motor within the stated 50–90 HP range can use the wiring, mounting, and part-number details to assess compatibility. This is a motor replacement, not a complete assembly.

Listed on Amazon as: Power Tilt & Trim Motor 6H1-43880-02-00 for Yamaha 50 60 70 80 90 HP