Best Weld On Teeth For Skid Steer Bucket: Compare 10 Kits

#1 · Best Overall

1. Titan Attachments 23WTL Assembly

• Weight: 29 lb

Best for: Replacement for 23-style buckets.

Why it ranks #1: Its five-tooth kit includes weld-on shank adapters and T23 flex pins, and the listing identifies it as a replacement for 23-style OEM teeth.

A twin tiger tooth assembly pairs a 23WTL tooth with a weld-on shank and T23 flex pin, giving buyers the tooth, adapter, and retention parts together. Its stated replacement fit for 23-style OEM bucket teeth makes it a specific option for repairing compatible buckets rather than a universal tooth choice.

The 6.25-inch tooth and 8.6-inch adapter form a 12.5-inch total assembly, giving buyers concrete dimensions to compare with their existing setup. Titan says the adapter can be welded onto most buckets with a 1.25-inch lip, which helps assess whether the bucket edge suits installation. The included T23 flex pin completes the assembly, while the 3-inch tooth width and 1.56-inch pocket width offer further checks against the existing tooth and mounting arrangement.

Skip it if you need a flush-mount 2A shank; CarBole's L2520N-2AH kit is specified for that tooth system.

For a bucket using 23-style teeth and a 1.25-inch lip, this set supplies the tooth, weld-on shank, and flex pin together. Check the listed dimensions and tooth system before choosing it for another mounting style.

Listed on Amazon as: Titan Attachments Set of (5) 23WTL Twin Tiger Tooth Bucket Assembly w/Shank & T23 Flex Pin

#2 · Complete 23 Series Kit

2. BDI Wear Parts 2740MW23 Assembly

• Weight: 30.8 lb

Best for: 23 and 230 series welding.

Why it ranks #2: This five-set assembly includes weld-on 2740MW23 adapters, 230-series teeth, and TF23P flex pins for 23 and 230 series skid steer loaders.

A 2740MW23 weld-on adapter, 230-series tooth, and TF23P flex pin make this BDI Wear Parts kit a complete assembly for one tooth position. Its stated application covers 23 and 230 series skid steer loaders and excavators, giving buyers a specific tooth-system match to consider before welding.

The adapter is intended to be welded directly to the bucket edge or an existing base, creating the mounting point for the included tooth. That permanent weld-on installation is relevant for buyers repairing a tooth position rather than seeking a clamp-on attachment. The TF23P flex pin is included to secure the tooth after the adapter is welded. The listing describes the assembly as suited to high-impact digging, and the 23/230-series designation helps buyers check their current system first.

Skip it if you need five tooth positions in one package; Titan Attachments' 23WTL set includes five assemblies.

This kit fits a repair where one 23- or 230-series position needs an adapter, tooth, and flex pin. It requires welding, so it is not the right choice for buyers seeking a non-weld installation.

Listed on Amazon as: BDI Wear Part Assembly Excavators Teeth, 2740MW23 Adapter +230 Bucket Teeth and TF23P Flex Pins Weld on Bucket Teeth for 23 & 230 Series Skid Steer loaders and excavators-5set

#3 · 5/8-Inch Lip Fit

3. Digger Supply 230X156 Combo

• Weight: 16 lb

Best for: Three teeth for 5/8-inch lips.

Why it ranks #3: The kit supplies three weld-on shanks, X156S dirt teeth, and roll pins, with a stated fit for buckets having a 5/8-inch lip.

Three 230×156 weld-on shanks, X156S dirt teeth, and P156 roll pins form this Digger Supply combo for buckets with a 5/8-inch-thick lip. That lip specification and the listed mini-excavator application make it a focused replacement kit for buyers whose bucket edge and tooth system match those details.

The three shanks, dirt teeth, and roll pins provide the listed components for replacing three positions together. Digger Supply states that the combo fits many mini excavator buckets with a 5/8-inch-thick bucket lip, a key installation constraint for this weld-on setup. The 230×156 shank and X156S tooth names further help buyers compare the existing parts. With the lip thickness and matching components checked, the package offers a coordinated replacement rather than separate parts selection.

Skip it if you need a listed 1.25-inch lip fit; Titan Attachments' 23WTL assembly specifies that bucket-edge thickness.

This combo suits mini-excavator owners replacing three positions on a bucket with a 5/8-inch lip. Confirm that lip thickness and the listed 230×156 and X156S parts match the existing setup before welding.

Listed on Amazon as: Excavator, Skid Bucket Combo, Weld-on Shanks, Teeth & Pins, 5/8" Lip – 230X156, X156S (3)

#4 · Adapter-Only Pack

4. HYAT 2300FL Adapters

• Weight: 30.1 lb

Best for: Seven flush-mount adapters.

Why it ranks #4: Seven 2300FL weld-on flush-mount adapters are listed for skid steer and mini excavator buckets, useful when teeth and pins are already available.

Seven 2300FL weld-on flush-mount adapters make this HYAT package an adapter-focused replacement option for skid steer and mini-excavator buckets. The listing names John Deere, Case, Terex, and Caterpillar models among its applications, so the adapter number and current mounting parts are central to evaluating fit.

HYAT identifies the part as a 2300FL adapter and lists the replacement number 1001-23, giving buyers two identifiers to compare with their existing shanks. The seven-piece quantity can support replacement at multiple bucket positions, while the weld-on flush-mount format indicates that installation involves attaching adapters to the bucket. The listing names several equipment makes but does not specify teeth or pins in the package, so buyers should plan separately for those components when needed.

Skip it if you need teeth and flex pins with the weld-on adapter; BDI Wear Parts' 2740MW23 kit lists all three components.

This package suits a buyer replacing multiple 2300FL adapters on a compatible skid steer or mini-excavator bucket. It supplies adapters only, so account for teeth and pins separately and compare the part number before welding.

Listed on Amazon as: 2300FL Bucket Tooth Adapter, 2300FL(1001-23) Weld-on Flush Mount Shanks Adapter Replacement for Skid Steer Mini Excavator Bucket 23 230S TF23-7 Pack

#5 · 2A Flush-Mount Kit

5. CarBole L2520N-2AH Kit

• Weight: 16.09 lb

Best for: 1–8-ton compact equipment.

Why it ranks #5: The five-set weld-on flush-mount kit includes bucket teeth and pins, and lists compatibility with skid steers and compact loaders.

Five L2520N-2AH flush-mount tooth sets with pins give CarBole buyers a ready-to-use replacement package for compact equipment. The listing specifies compatibility with 1–8-ton mini excavators, skid steers, and compact loaders, making its stated machine range the clearest starting point for deciding whether this 2A kit belongs on a bucket.

CarBole lists the teeth at 8.98 inches long and 2.05 inches wide, dimensions buyers can compare with their current tooth arrangement before maintenance. The flush-mount L2520N-2AH designation identifies the shank style, while included pins complete each of the five replacement sets. Together, those details help plan a multi-position changeover and check the tooth system. The stated 1–8-ton range covers several compact machine types, but the dimensions and existing mounting style still matter.

Skip it if you need a general-duty 2A set for small tractors too; Ecdtrans's L2520W-2AH listing names tractor buckets.

For compact-machine owners with L2520N-2AH-style buckets, this five-set package includes pins for routine tooth replacement. Its stated range is 1–8 tons, so buyers with larger equipment should look beyond this specified fit.

Listed on Amazon as: CarBole Weld-on Flush Mount 2A Bucket Shanks L2520N-2AH Bucket Teeth with Pins

#6

6. luxlead L2520N-2AH Kit

• Weight: 16.35 lb

Best for: Heat-treated 2A digging teeth.

Why it ranks #6: Its five-pack of weld-on flush-mount shanks includes teeth and pins and claims compatibility with skid steer loaders, backhoes, and excavators.

Heat-treated alloy steel gives luxlead's L2520N-2AH tooth set its stated hardness and impact resistance for digging in soil, gravel, sand, and compacted materials. The five-pack's listed compatibility spans mini excavators, backhoes, excavators, and skid steer loaders, making it a 2A option for buyers across those machine types.

The L2520N-2AH 2A shank designation helps buyers identify the mounting system, while the stated machine compatibility covers several loader and excavator categories. Luxlead describes the teeth as forged from heat-treated alloy steel, with impact resistance and hardness for penetrating impacts and high digging forces. Those material claims relate directly to demanding ground conditions, but the listing does not provide specific tooth dimensions. Checking the existing 2A setup remains important before planning a replacement across five positions.

Skip it if you need stated tooth length and width for comparison; CarBole's L2520N-2AH listing provides dimensions.

This set suits buyers with L2520N-2AH-style buckets working in soil, gravel, sand, or compacted material. Its stated machine range is broad, but the listing lacks tooth dimensions, so compare the existing parts before ordering.

Listed on Amazon as: 2A Bucket Shanks L2520N-2AH Weld-on Flush Mount Bucket Teeth with Pins Backhoe Excavator Bucket Digging Teeth Adapter, 5 Pack

#7

7. Ecdtrans L2520W-2AH Kit

• Weight: 31.6 lb

Best for: 2A shank replacement set.

Why it ranks #7: This weld-on flush-mount 2A package includes shanks, teeth, and pins, but its stated applications focus on small backhoe, mini excavator, and tractor buckets.

Ten L2520W-2AH weld-on flush-mount 2A shanks and 2AH teeth, with pins included, make this Ecdtrans set a multi-position replacement option. Its stated compatibility with many small backhoe, mini excavator, and tractor buckets helps narrow its audience to equipment using the 2A series rather than other tooth systems.

The 2A-series designation gives buyers a starting point for matching these shanks and teeth to an existing bucket setup. Because pins are included with the assembly, the set also brings the retention pieces needed for those teeth, rather than listing shanks alone. Ecdtrans describes the tooth as general-duty, with good penetration and long service life, and identifies alloy steel as the material. The listed package dimensions are 12 by 10.75 by 4.6 inches for storage planning.

Skip it if you need a stated 1–8-ton mini excavator and skid-steer fit; CarBole's L2520N-2AH kit lists that range.

Choose this set when the bucket uses L2520W-2AH 2A components and you want teeth, shanks, and pins together. Its stated fit covers many small backhoes, mini excavators, and tractors, not every bucket mounting system.

Listed on Amazon as: L2520W-2AH Weld-on Flush Mount 2A Bucket Shanks 10Pcs

#8

8. GAHNKEN 230SP U43792 Kit

Best for: 230SP kit for listed machines.

Why it ranks #8: The five-set replacement kit lists teeth, adapters, and flex pins for skid steer loaders, but buyers must verify pocket width and pin diameter.

Five 230SP teeth, U43792 adapters, and 23FP flex pins are combined in one GAHNKEN kit, addressing the need for matching parts at multiple tooth positions. The listing names skid steer loaders and mini excavators, with several major equipment brands, as compatible applications when the existing mounting dimensions match.

The included tooth, adapter, and flex pin make this a coordinated replacement package rather than a listing for teeth alone. GAHNKEN identifies compatibility with Bob-cat, John Dee-re, Ku-bota, Takeu-chi, C-ase, and J-CB equipment, but also directs buyers to compare pocket width and pin diameter with its size chart. That check matters before installation: brand names alone do not establish mounting fit. The five sets support replacing several positions in one maintenance round.

Skip it if you need a listed 1.25-inch bucket-lip fit; Titan Attachments' 23WTL assembly specifies that lip thickness.

This kit suits operators replacing several 230SP positions on a listed skid steer or mini excavator. Compare the existing adapter pocket and pin diameter with the supplied size chart, since machine brand alone does not verify fit.

Listed on Amazon as: 5 Sets 230SP Bucket Teeth & U43792 Bucket Tooth Adapters with 23FP Flex Pin

#9

9. DANWIWEE Bucket Teeth

Best for: Hammer-free tooth replacement.

Why it ranks #9: These six replacement teeth include flex pins and state that welding is supported, but the listing also describes a double-bolt design rather than a dedicated weld-on shank.

A hammer-free quick-install design sets DANWIWEE's six bucket teeth apart, combining a double-bolt fixing structure with support for welding. The listing also specifies high-manganese steel for wear resistance and includes flex pins, making this a replacement option for buyers seeking multiple installation approaches on compatible compact equipment.

The double-bolt structure is described as allowing replacement without hammer tools, which can simplify the stated maintenance process. DANWIWEE also says the teeth support welding, giving buyers another listed installation method. High-manganese steel is presented as wear-resistant material intended to reduce replacement frequency, while six teeth and included flex pins provide the package components. The title lists mini excavators and skid steer loaders; the stated 0.39-inch aperture is a useful dimension to compare with the existing mounting arrangement.

Skip it if you need a 23-series weld-on adapter and tooth together; BDI Wear Parts' 2740MW23 assembly includes both.

This set suits buyers replacing teeth on a compatible skid steer or mini excavator who value the listed hammer-free fixing option. Check the 0.39-inch aperture and mounting method against the existing bucket before installation.

Listed on Amazon as: 6 Pcs Digging Bucket Teeth with Flex Pins, Skid Steer Loader Backhoe Replacement Tooths, Aperture: 0.39inch Compatible with Mini Excavator and Skid Steer Loader

#10

10. TRUCFUSION 6684447 Teeth

• Weight: 16 lb

Best for: Carbon-alloy digging replacement.

Why it ranks #10: The listing identifies skid steer loader bucket teeth made from carbon alloy steel, but provides no stated weld-on adapter, shank, or mounting dimensions.

Carbon alloy steel is the defining material of TRUCFUSION's 6684447 bucket teeth, which the listing describes as high in hardness and impact resistance. That makes the material specification relevant to buyers replacing worn skid steer or backhoe teeth for digging work, while the 6684447 model number anchors the equipment-part comparison.

The listing connects replacing worn teeth with improved ground penetration and digging efficiency, giving buyers a clear reason to consider a change when existing teeth have worn down. Carbon alloy steel is described as having high hardness and impact resistance for high-intensity digging. TRUCFUSION also identifies installation and removal as quick, which speaks to maintenance workflow, though it does not provide a detailed mounting procedure. The 6684447 model number is the key identifier to check against the current part.

Skip it if you need a complete weld-on assembly with a specified adapter and pin; BDI Wear Parts' 2740MW23 kit includes both.

These teeth suit buyers replacing worn 6684447 parts for skid steer or backhoe digging. The listing emphasizes material and quick installation, but does not specify an adapter or pins, so check what the existing setup requires.

Listed on Amazon as: Skid Steer Loader Bucket Teeth 6684447, Backhoe Bucket Teeth