Best Slide Motor For RV: Compare In-Wall and Through-Frame Options

#1 · Best Overall

1. Lippert 287298 Motor

• Weight: 1.6 lb
• Voltage: 12 V

Best for: Genuine Lippert in-wall motor.

Why it ranks #1: Genuine 12V replacement for in-wall slides with a 500:1 high-torque ratio; the listing identifies the motor assembly as an exact-match component.

Lippert’s genuine 500:1 high-torque motor assembly is specified for in-wall slide-outs and carries the 287298 model reference. It enables owners seeking that exact replacement type to focus on a motor assembly from the system’s named component brand, rather than a through-frame actuator.

The 287298 reference and in-wall designation make the intended application clear for owners comparing a failed motor with their existing component. Lippert lists a 12-volt rating and a 500:1 ratio, giving useful electrical and gearing details for replacement planning. The package contains the motor only, not the complete slide-out assembly, so buyers can distinguish a motor repair from a broader system replacement. Its 1.6-pound weight may also make handling simpler than a heavier actuator assembly, though mounting fit still depends on the existing setup.

Skip it if you need a through-frame motor and actuator; this Lippert assembly is specified for in-wall slide-outs.

This suits an owner matching a Lippert 287298 in-wall motor who wants the specified 500:1, 12-volt assembly. It is a motor-only replacement, so it does not replace the complete slide-out mechanism.

Listed on Amazon as: Lippert Replacement 500:1 In-Wall Slide-Out Motor Assembly, High Torque, Replacement motor for In-Wall Slide-Outs, Easy, DIY installation, Exact-Match Component – 287298

#2 · High-Ratio In-Wall

2. FHRHRY 287298 Motor

• Voltage: 12 V DC
• Material Type: Rubber

Best for: 287298 in-wall motor match.

Why it ranks #2: Targets Lippert LCI Schwintek in-wall systems with a 500:1 gear ratio and 12V DC operation; verify the motor number before purchase.

The 500:1 high-torque gear ratio identifies this 12-volt FHRHRY motor as an in-wall slide replacement associated with the 287298 reference. That combination gives owners a specific model and system type to compare when restoring a compatible travel-trailer or motorhome slide.

Its 287298 model designation and stated Lippert LCI Schwintek in-wall compatibility help owners focus fit checks on the intended system rather than through-frame mechanisms. The 500:1 ratio is identified as high torque, a relevant characteristic for a slide motor, while the 12-volt DC rating supplies an electrical reference. The listed dimensions are 1.65 inches wide by 6.18 inches high, which can inform space checks during replacement planning. The package contains one in-wall motor; the listing advises checking the model and part number.

Skip it if you need a through-frame actuator and motor; this listing is for a 287298 in-wall motor.

A buyer replacing a 287298-compatible Schwintek in-wall motor can use the ratio, voltage, and dimensions to guide comparison. Confirm the existing reference and available space; this is a motor assembly, not a full slide mechanism.

Listed on Amazon as: 287298, RV in-Wall Slide-Out Motor Compatible with Lippert LCI Schwintek in-Wall Slide System, Motorhome Slide Motor Assembly for Travel Trailer and Camper | 500:1 High Torque Gear Ratio, 12V DC

#3 · Through-Frame Assembly

3. Lippert 168956 Assembly

• Weight: 21.3 lb
• Voltage: 12 V

Best for: Through-frame actuator replacement.

Why it ranks #3: Genuine 12V through-frame actuator and motor assembly, specified at an 18:1 ratio and 30 amps for compatible Venture slide systems.

The genuine Lippert 18:1 Venture through-frame assembly combines a 12-volt motor with a high-speed actuator, enabling a replacement aimed specifically at through-frame slide-outs. Its 30-amp and 9,500-RPM specifications give buyers concrete electrical and speed references when matching the existing assembly.

Because the package includes both actuator and motor, this replacement addresses more than a motor-only repair, while its through-frame designation identifies the intended slide mechanism. The 12-volt rating and 30-amp specification offer useful electrical references for planning a compatible replacement. Lippert identifies it as a genuine Venture component, and the listed 18:1 ratio and 9,500 RPM provide further comparison points. At 21.3 pounds, it is a substantial assembly to handle during installation; the listing does not describe it as an in-wall motor.

Skip it if you need only an in-wall motor; Lippert’s 287298 assembly is specified for in-wall slide-outs.

A Venture through-frame owner seeking a genuine actuator-and-motor replacement can use its stated electrical and ratio specifications to compare parts. Its 21.3-pound weight and through-frame application are important handling and fit boundaries.

Listed on Amazon as: Lippert 12-Volt DC Replacement 18:1 Venture Through-Frame Slide-Out Motor Assembly with High-Speed Actuator, 30 Amps, 9,500 RPM – 168956

#4 · Dual-Shaft Power Gear

4. FHRHRY 523900 Motor

• Voltage: 12 V DC
• Material Type: Aluminum

Best for: Power Gear dual-shaft replacement.

Why it ranks #4: 12V dual-shaft Power Gear replacement with a 131:1 ratio and listed output figures of 9 RPM at 850 in-lbs.

A 131:1 gear ratio paired with a dual-shaft, 12-volt DC motor gives this FHRHRY assembly a specific Power Gear replacement profile. Its broad list of compatible part numbers enables owners to compare the existing motor against named references instead of relying on a generic slide-motor description.

The stated 131:1 ratio and dual-shaft format help identify the assembly and its intended Power Gear application. The speed figures show different operating conditions: 9 RPM at 850 in-lbs, 12 RPM at 400 in-lbs, and 14 RPM without load. That context helps buyers understand the relationship between load and speed rather than treating one speed as universal. Aluminum construction is specified, and the 12-volt DC rating provides an electrical reference for replacement planning. The listing advises checking the existing model and part number.

Skip it if you need a through-frame actuator assembly rather than a Power Gear dual-shaft motor; this listing specifies the latter.

This suits owners matching a Power Gear motor by part number who need a dual-shaft, 12-volt replacement. Compare the existing reference carefully and account for the listed load-dependent speed figures when evaluating operation.

Listed on Amazon as: RV Power Gear Slide Out Motor, Motorhome Replacement Gearbox Motor | in-wall Dual Shaft, 131:1 Gear Ratio, 12V DC, Replace# 523900 522967 523143 523983 521976 523529 524327 K01265B300 K01469B300 etc.

#5

5. NOVOPARTS 523900 Motor

• Weight: 10.2 lb
• Voltage: 12 V
• Material Type: Aluminum

Best for: Power Gear double-shaft motor.

Why it ranks #5: A 12V double-shaft replacement for several Power Gear numbers, including 523143, 523983, and 521976; confirm exact fitment.

The NOVOPARTS 523900 replacement is identified as a 12-volt, double-shaft Power Gear slide motor, giving owners several concrete matching references. Its named compatibility with 523143, 523983, and 521976 helps buyers target a specific family of replacement applications rather than an unspecified RV motor.

The 523900 model and listed replacement references help owners compare the motor against an existing Power Gear part before choosing a replacement. A 12-volt rating provides a clear electrical detail, and the double-shaft configuration identifies the output style. The aluminum material is specified, while the 3.35-inch width and 10-inch height offer dimensions for handling space and installation planning. The listing does not state a gear ratio, amperage, or operating speed, so those performance details cannot guide a more exact comparison.

Skip it if you need a stated gear ratio or operating-speed figure to compare replacements; this listing provides neither.

This is suited to owners matching a 523900 or one of its named Power Gear references who need a double-shaft, 12-volt motor. Use the listed dimensions in planning, and note that performance figures are absent.

Listed on Amazon as: 523900 RV Slide Out Motor Replacement for Power Gear Slide Out Motor 12V 523143, 523983, 521976, Double Shaft

#6

6. kalageen 236575 Motor

• Weight: 1.56 kg
• Material Type: Metal

Best for: 236575 in-wall replacement.

Why it ranks #6: A replacement motor assembly identified for 236575 and Schwintek in-wall applications; the listing specifies metal construction but no voltage.

The two-piece listing for a 236575 IG-42 motor assembly with a 10 mm specification gives owners a clearly identified replacement target. It enables shoppers whose existing slide motor matches that designation to source a pair of assemblies, rather than a single motor, for their RV in-wall slide-out repair.

The 236575 model name and IG-42 (10 mm) description provide concrete identifiers to compare with the existing motor before ordering, helping narrow compatibility checks. The listing specifies metal construction and a 1.56 kg item weight, useful details when planning handling and replacement work. It includes two motors, so the purchase quantity may suit a repair that calls for a pair. The manufacturer says the motors are factory tested, but the listing does not provide operating-speed or electrical specifications.

Skip it if you need a documented voltage or torque rating; this listing does not provide either specification.

A buyer replacing a matching 236575 IG-42 in-wall motor may value the two-piece quantity and clear shaft designation. Check the existing model and 10 mm specification carefully; electrical performance details are not provided here.

Listed on Amazon as: 2pcs 236575 RV in-Wall Slide-Out Motor, IG-42 (10mm) Motor Assembly

#7

7. kalageen 132682 Motor

• Material Type: Aluminum

Best for: 132682 and 168956 match.

Why it ranks #7: Listed as a replacement for Lippert 168956 and 132682 motors, making it relevant to matching through-frame setups; verify dimensions and fit.

This kalageen motor names both 132682 and 168956, giving owners of those listed slide-motor references a direct starting point for replacement matching. Its additional 8532-18HT designation helps identify the intended assembly, while the aluminum specification distinguishes its stated construction.

The 132682 and 168956 references connect the listing to specific replacement searches, and the 8532-18HT name offers another identifier to compare with an existing motor. Aluminum construction is stated, which helps buyers know the specified material when planning a replacement. The listing describes the part as an RV slide-out motor and offers replacement or refund support if a fit or quality issue arises. However, it gives no voltage, amperage, speed, or included-component details, so those aspects cannot be used for matching from the supplied specifications.

Skip it if you need documented electrical or speed specifications to compare motors; this listing supplies none of those figures.

This is a candidate for owners matching a 132682, 168956, or 8532-18HT reference who want an aluminum slide motor. Verify the exact application using the existing part details, since electrical specifications are not listed.

Listed on Amazon as: 132682 RV Slide Out Motor, Replace 168956 Slide Motor,8532-18HT

#8

8. BELKEBIR 18:1 Motor

• Weight: 2.1 kg

Best for: Lippert through-frame motor.

Why it ranks #8: Specifies 12V DC, 30 amps, and an 18:1 ratio for compatible Lippert through-frame systems, but the listing provides fewer assembly details.

A 12-volt DC rating, 30-amp specification, and 18:1 gear ratio define this BELKEBIR replacement for Lippert-compatible through-frame slide systems. Its named replacement references—including 132682, 168956, and RP-785615—enable owners to compare several common part identifiers against their existing actuator motor.

The 18:1 reduction and heavy-duty gears are presented as supporting power transfer under load, while the 30-amp rating gives a concrete electrical comparison point. Its stated compatibility includes Venture and Tuson through-frame systems, with replacement references spanning 132682, RP-785615, 168956, 295380, and M-8910. The listing also identifies 2 x 2 or 2.5 x 2.5 Lippert actuator motor applications, helping owners narrow fit checks. One motor is included; the product is not described as a complete actuator assembly.

Skip it if you need a complete actuator rather than a replacement motor; this listing includes one motor only.

This fits buyers replacing a listed Lippert-compatible through-frame motor who can match the references and stated actuator dimensions. Its 30-amp and 18:1 specifications aid comparison, but the purchase is motor-only, not a complete actuator.

Listed on Amazon as: RV Actuator Slide Out Motor Compatible with Lippert | 12V DC 30A 18:1 Gear Ratio | Replacement for Venture/Tuson Through-Frame Slide Out Systems Replaces Rp-785615, 132682, 168956, 295380, M-8910

#9

9. Sunluway 225008 Gear Housing

• Weight: 3.2 kg
• Voltage: 12 V

Best for: BAL Accu-Slide cable systems.

Why it ranks #9: A 12V motor-and-gear-housing replacement for BAL Accu-Slide cable systems; it is a specialized fit rather than a general slide motor.

A combined motor and gear housing for the BAL Accu-Slide cable system makes this Sunluway replacement useful when the repair requires both components together. Its 225008 designation and stated replacements R25075 and R25076-1 give owners specific references for identifying the intended cable-slide application.

The 12-volt rating identifies the system voltage, while the 225008 replacement designation helps buyers compare the part against the existing BAL Accu-Slide motor and gearbox. Since the listing supplies the motor and gear housing as one component set, it can consolidate sourcing for a repair involving both parts. Sunluway describes the motor as high torque with quiet operation, relevant to slide movement and campsite use. The listed weight is 3.2 kg, a practical handling consideration during installation.

Skip it if you have an in-wall slide system rather than a BAL Accu-Slide cable setup; this replacement is specified for the latter.

Choose this for a BAL Accu-Slide cable-system repair where a motor and gear housing are both needed. Its 12-volt specification and named replacement references aid comparison, but it is not presented as an in-wall motor.

Listed on Amazon as: 225008 RV Slide Out Motor & Gear Housing for BAL Accu-Slide Cable Slide Out System, Replace for ‎R25076-1 Gearbox R25076 RV Slide Out Gearbox and R25075 RV Side Motor

#10

10. FOMIUZY R25076 Gearbox

• Weight: 3.17 kg
• Voltage: 12 V

Best for: Accu-Slide gearbox replacement.

Why it ranks #10: Designed around the R25076 and 225008 Accu-Slide system, with a 12V, 16A motor and 13-tooth sprocket; fit is narrowly system-specific.

A heavy-duty metal gearbox paired with a 12-volt PMDC motor and 3/16-inch single output shaft gives this FOMIUZY assembly a specific Accu-Slide profile. Its listed R25076 and R25075 references enable owners to compare the gearbox and motor against named replacement parts.

The R25076 housing and R25075 motor references help narrow the intended Accu-Slide application, while the 3-tooth sprocket and 13-tooth sprocket description provide drive details for comparison. The motor is specified at 12 volts, 16 amps, 45 watts, and 12 revolutions per minute, giving buyers several operating figures to review. A heavy-duty metal gearbox is also stated. The listing advises adjusting the slides correctly to maintain proper tension, making setup an important part of using this high-output upgrade.

Skip it if you need an in-wall motor rather than an Accu-Slide gearbox and motor; this assembly is specified for the latter.

Choose this for an Accu-Slide repair matching the R25076 and R25075 references when the gearbox and motor are both needed. Its stated output details aid matching, but correct slide tension adjustment remains important.

Listed on Amazon as: Rv Slide Out Gearbox Housing R25076 Accu Slideout PMDC Motor R25075 Replaces R25076-1 225008 25076-1 R25075 R25074 64ZY-CJ001-039 3/16 Drive High Output 13 Gear Sprocket High Torque Parts