Best Ramps For Flatbed Trailer: Compare 10 Options

#1 · Best Overall

1. Mytee Viking Ramps

• Weight: 200 lb

Best for: Heavy-axle Viking trailer loading.

Why it ranks #1: Explicitly compatible with flatbed trailers, these 18-by-96-inch aluminum ramps have a 23,500-pound-per-axle working load limit and pin connection.

A 23,500-pound-per-axle working load limit sets these 18-by-96-inch aluminum ramps apart, giving heavy-equipment haulers a high-capacity route onto compatible flatbed and step-deck trailers. Their non-slip surface and pin connection support a loading setup that depends on Viking-compatible hardware.

The 18-inch width and 96-inch length provide a broad, extended approach for loading machinery, while the non-slip surface supports traction on the ramp. Aluminum keeps the ramp material distinct from steel, and the pin connection links it to the trailer setup. Sold as a pair, these ramps are rated at 23,500 pounds per axle; that is an axle-based limit, not a stated per-ramp figure. Compatibility is specifically limited to Viking brand items and kits.

Skip it if you need ramps for a non-Viking kit; the labwork 60-by-12-inch ramps offer a separate loading option rated for 6,500 pounds per pair.

Choose these for heavy machinery loading on a flatbed, loading dock, or step-deck setup using Viking-compatible equipment. The 23,500-pound rating is per axle, and the pin connection makes compatibility a key boundary.

Listed on Amazon as: Mytee Products 1Pair 18" x 96" Viking’s Aluminum Trailer Ramps Compatible with Flatbed Trailers, Loading Docks, Step-deck Trailers – 23,500 lbs/Axle Heavy Duty Non-Slip Loading Ramp for Tractor

#2 · Best Flatbed Fit

2. RecPro Steel Ramps

• Dimensions: 72"L x 12"W x 2"H
• Weight: 57 lb
• Load Capacity: 5000 lb

Best for: Steel ramp pair for flatbeds.

Why it ranks #2: Listed for flatbeds and tailgates, this 72-by-12-inch steel pair supports 5,000 pounds combined; it must be painted or sealed before use.

A 72-inch length and 5,000-pound combined capacity make this RecPro steel pair a practical option for loading wheeled equipment onto flatbeds and truck beds. Its 12-inch width accommodates the listed ATV, tractor, and lawn mower uses, but the steel needs treatment before use.

Each ramp supports up to 2,500 pounds, making the 5,000-pound pair rating useful when the load is distributed across both ramps. At 72 inches long and 12 inches wide, the ramps are sized for wheels from ATVs, tractors, and lawn mowers, as well as trailer and truck-bed loading. The key ownership step is explicit: paint, seal, or otherwise treat the alloy steel before use to help prevent damage and preserve its life.

Skip it if you want ramps ready to use without a treatment step; PioneerWorks' steel ramps list a rust-resistant construction.

Consider this pair for trailer or truck-bed loading of ATVs, tractors, and mowers when 72-inch steel ramps suit the setup. Plan to paint, seal, or treat them before their first use.

Listed on Amazon as: Heavy Duty 72" x 12" Trailer Loading Ramps | 10ga Steel | for Flatbeds and Tailgates | 5000lb Capacity (2-Pack)

#3 · Best 84-Inch Pair

3. AUTOSAVER88 Aluminum Ramps

• Dimensions: 84"L x 14"W x 2.36"H
• Weight: 54 lb
• Load Capacity: 6E+3 lb

Best for: Frequent aluminum trailer loading.

Why it ranks #3: These 84-by-14-inch aluminum trailer ramps are listed with a 6,000-pound capacity, offering a long, wide pair for substantial loads.

A stated 6,000-pound capacity paired with aluminum ramps described as 60 percent lighter than steel targets frequent loading and unloading. At 84 inches long and 14 inches wide, the AUTOSAVER88 pair offers a long, broad approach for trailer use while remaining easier to transport than steel ramps, according to its description.

The 84-by-14-inch dimensions give the pair a long approach and broad ramp width for positioning equipment during repeated loading work. Reinforced crossbars are listed alongside the 6,000-pound capacity, connecting the construction feature to the stated load rating. Aluminum is described as 60 percent lighter than steel and corrosion resistant, supporting portability and use where corrosion concerns matter. The listing gives a pair capacity, so keep the equipment's total loading demand within 6,000 pounds.

Skip it if you need a loading capacity above 6,000 pounds; Mytee Products' Viking ramps list a 23,500-pound-per-axle working load limit.

This pair fits frequent trailer loading where an 84-inch aluminum ramp and easier transport than steel are priorities. Keep the full load within the listed 6,000-pound capacity, and match the dimensions to the trailer approach.

Listed on Amazon as: AUTOSAVER88 2pcs 6000lbs 84" x 14" Aluminum Trailer Ramps

#4

4. Loezora Aluminum Ramps

• Dimensions: 14"L x 5.9"W x 84"H
• Weight: 47.2 lb
• Load Capacity: 6000 lb

Best for: Long aluminum trailer approach.

Why it ranks #4: The 84-by-14-inch aluminum pair is listed at 6,000 pounds, making it a long trailer-ramp option, though detailed connection information is absent.

An 84-inch length and 6,000-pound listed capacity make Loezora's aluminum pair a long-format option for trailer loading. The 14-inch width provides a broad stated ramp dimension, while the two-ramp package supports a paired approach for moving equipment onto a raised surface.

The 84-inch length gives buyers a longer ramp format than compact loading ramps, which can help match a trailer's approach geometry. At 14 inches wide, each ramp offers a broad stated dimension for positioning equipment; the pair is listed at 6,000 pounds of capacity. Aluminum construction distinguishes the material from steel alternatives, and the two-piece set can be handled as separate ramps during setup. Confirm that the stated capacity and dimensions suit the intended equipment and trailer arrangement.

Skip it if you want a specifically described non-slip or perforated surface; PioneerWorks' steel ramps list a punched textured traction surface.

This pair is for buyers who want long aluminum ramps for trailer loading and whose equipment fits the 6,000-pound listed capacity. The supplied facts do not describe a traction-surface design, so account for that in selection.

Listed on Amazon as: 6000LBS Aluminum Trailer Ramps 84×14 in, 7FT Loading Ramps 2 Pack

#5 · Widest Listed Ramp

5. HECASA Trailer Ramps

• Dimensions: 60"L x 15"W x 2.25"H
• Weight: 55.1 lb
• Load Capacity: 6800 lb

Best for: Wide aluminum loading ramps.

Why it ranks #5: This aluminum pair measures 60 by 15 inches and has a stated 6,800-pound capacity, with hook-end knife-foot design noted in the title.

A 15-inch width gives the HECASA aluminum ramps a broad loading surface across their 60-inch length, and the pair carries a listed 6,800-pound capacity. The hook-end, knife-foot configuration identifies the ramp-to-vehicle interface for truck, bike, and motorcycle loading.

The 60-by-15-inch dimensions provide a wider track than a 12-inch ramp, which can be useful when positioning the listed truck, bike, and motorcycle loads. Aluminum construction keeps the pair in the lightweight-metal category, while the 6,800-pound stated capacity gives buyers a clear load boundary. Hook ends and knife feet specify the connection style at the loading edge, so the trailer or truck arrangement needs to work with that interface.

Skip it if you need a longer ramp for a higher loading approach; Loezora's 84-inch aluminum ramps provide a longer stated length.

This pair suits buyers seeking 60-inch aluminum ramps with a 15-inch width for truck, bike, or motorcycle loading. Check that the hook-end and knife-foot interface matches the loading surface and that the length fits the approach.

Listed on Amazon as: HECASA 60''X 15''Trailer Ramp Universal 6800 LBS Truck Bike Motorcycle Loading Ramps Hook End Knife Foot Pair (NN1771)

#6

6. PioneerWorks Steel Ramps

• Dimensions: 76.38"L x 9.06"W x 1.97"H
• Weight: 39.3 lb
• Load Capacity: 1000 lb

Best for: Textured steel ramp pair.

Why it ranks #6: The 72-inch steel pair has a textured, water-draining traction surface, but its 1,000-pound combined capacity limits it to lighter equipment.

A punched, textured surface that helps tire grip and drains water gives PioneerWorks' 72-inch steel pair a practical traction feature for trailer loading. The two ramps are rated for 1,000 pounds combined, with a 500-pound limit on each ramp for balanced loading.

At 72 inches long and 9 inches wide, the ramps suit the listed truck-bed, trailer, shed, and garage uses for motorcycles, bikes, ATVs, mowers, and snow blowers. The textured punched surface supports tire grip and lets water drain, helping with cleaning after use. Rust-resistant steel provides the stated material treatment, while the 500-pound per-ramp and 1,000-pound pair limits clarify how to distribute the load without exceeding either rating.

Skip it if you need more than 1,000 pounds across a pair; AUTOSAVER88's aluminum ramps list a 6,000-pound capacity.

This pair suits lighter motorcycles, bicycles, mowers, and similar equipment when textured traction and a 72-inch steel ramp fit the loading task. Keep both the 500-pound individual and 1,000-pound combined limits in view.

Listed on Amazon as: PioneerWorks 2-Pack 72" Steel Ramps – 500 lb Each / 1,000 lb Pair,Silver

#7

7. labwork Aluminum Ramps

• Dimensions: 60"L x 12"W x 2"H
• Weight: 19100 g
• Load Capacity: 3000 lb

Best for: Versatile light-equipment loading.

Why it ranks #7: The 60-by-12-inch aluminum pair is listed at 6,500 pounds combined and suits lighter vehicle loading, with a stated maximum load height of 16 inches.

A 60-by-12-inch aluminum pair rated for 6,500 pounds together gives this labwork set flexibility across smaller vehicles and equipment. Use one ramp for a dirt bike, bicycle, or motorcycle, or the pair for a lawn mower, ATV, UTV, or pickup-truck loading task.

Each ramp is listed at 3,250 pounds, with 6,500 pounds for the pair, so buyers can match one or both ramps to the listed loading task. The 60-inch length and 12-inch width create the loading surface, while the stated maximum load height of 16 inches gives a concrete height boundary for planning the approach. Aluminum is lighter than steel according to the product description, supporting easier handling than a steel ramp of comparable use.

Skip it if you need a 72-inch ramp or a higher stated capacity; RecPro's 72-inch steel pair is rated for 5,000 pounds total.

This pair suits buyers moving motorcycles, dirt bikes, lawn mowers, ATVs, or UTVs where a 16-inch maximum load height works. Keep the 3,250-pound single-ramp limit in view when loading with only one ramp.

Listed on Amazon as: labwork 2 Pcs 60 Inch x 12 Inch Aluminum Ramps Silver Trailer Ramps

#8

8. Arejonner Folding Ramps

• Dimensions: 72.5"L x 8.7"W x 1.8"H
• Weight: 34.1 lb
• Load Capacity: 1500 lb

Best for: Folding ramp pair for small equipment.

Why it ranks #8: These 72.5-inch steel ramps include safety straps and gloves, but their 1,500-pound capacity and narrower 8.7-inch width suit smaller equipment.

A dense perforated traction surface paired with a folding design gives Arejonner ramps a useful combination for loading motorcycles, ATVs, and lawn mowers. Four safety straps secure the ramps in place, while the 1,500-pound capacity defines their boundary for heavier equipment.

The 72.5-inch length and 8.7-inch width form a narrower loading track suited to the listed motorcycles, ATVs, UTVs, golf carts, lawn mowers, and snow blowers. Dense perforations provide traction and are described as helping prevent wheel slippage and entrapment in any weather. Folding supports easier storage, while the included four safety straps secure the ramps during installation; gloves are also included for handling. The 1,500-pound capacity remains the limit to respect.

Skip it if you need a pair rated above 1,500 pounds; Loezora's aluminum ramps list a 6,000-pound capacity.

This set fits buyers loading smaller equipment into a trailer, shed, barn, or garage who value folding storage and included securing straps. Check that the equipment load stays within the 1,500-pound capacity.

Listed on Amazon as: 72.5" Heavy Duty Folding Loading Ramps, 1500lb Capacity, Ideal for Motorcycles, Lawn Mowers, ATVs, UTVs, and More – Pack of 2 with Safety Straps and Gloves

#9

9. Stalwart Steel Ramps

• Dimensions: 35.5"L x 8.5"W x 2"H
• Weight: 20.2 lb
• Load Capacity: 1200 lb

Best for: Compact shed and trailer loading.

Why it ranks #9: The steel pair has skid-resistant tread and a 1,200-pound combined rating, but its 35.5-inch length is a more limited loading option.

Two 35.5-inch steel ramps that can bolt together into a 17-inch-wide angled track give the Stalwart set a compact loading option for sheds, pickups, and trailers. Used separately, each ramp is rated for 600 pounds; together, the listed combined capacity is 1,200 pounds.

The two ramps can be used individually for scooters, dirt bikes, and motorcycles, or joined with bolts—sold separately—to create a wider track for four-wheeled equipment. Their skid-resistant tread supports grip during loading, while the 35.5-inch length suits the stated shed, truck, and trailer use. At 600 pounds per ramp and 1,200 pounds combined, the capacity is aimed at lighter equipment rather than heavy machinery; stay within the applicable single- or pair-ramp limit.

Skip it if you need a longer ramp or higher capacity for heavier equipment; PioneerWorks' 72-inch steel pair lists a 1,000-pound combined capacity.

Choose this set for lighter ATVs, motorcycles, mowers, or carts headed into a shed, pickup, or trailer. Its short 35.5-inch length and 1,200-pound combined capacity define the suitable loading range.

Listed on Amazon as: Loading Ramps – Steel Ramp Set for ATVs, Motorcycles, Mowers, Carts & More – Use with Pickup Trucks & Trailers – 1200lb Combined Capacity by Stalwart

#10

10. Mytee Starter Tow Ramps

• Dimensions: 10"L x 10"W x 10"H
• Weight: 4.06 kg

Best for: Low-profile car carrier transitions.

Why it ranks #10: These small nylon ramps create a 2-3/8-inch lift for low-profile cars at a flatbed carrier’s tail, rather than providing full loading access.

A 10-degree incline and 2-3/8-inch lift make this Mytee Products pair a specialized bridge between a rollback or trailer ramp and the ground. Its curved bottom edge and square profile address the transition point, while the 90-degree notch provides a defined engagement feature.

These 14-by-8-inch starter ramps are intended for low-profile cars, with the 2-3/8-inch lift easing the height transition at the tail of a flatbed car carrier or trailer ramp. A smooth 10-degree incline and curved bottom edge help create a gradual path over uneven ground, while the square profile and 90-degree notch define how the ramp meets the existing surface. The wear-, oil-, and grease-resistant glass-fiber-reinforced nylon suits a working carrier environment.

Skip it if you need full-length ramps for loading a vehicle onto a trailer; HECASA's 60-by-15-inch aluminum pair offers that format.

Pick this pair for carrier operators bridging the ground-to-ramp gap under low-profile cars, not for loading a vehicle up a full trailer approach. Its 2-3/8-inch lift is the defining fit boundary.

Listed on Amazon as: Mytee Products 14"x8"x2-3/8 Starter Tow Ramp for Steel Bed Rollback, Car Carrier, Hauler, Flatbed, w/Square Profile & Curved Bottom Edge – Safety Detachable Extendable Car Ramp Set – 2-3/8" Lift