Best Jacks For Lifted Trucks 2: Compare 10 Options

#1 · Best Overall

1. Powerbuilt 3 Ton UniJack

• Load Capacity: 6000 lb
• Material: Metallic-Fiber
• Compatible with Vehicle Type: Truck
• Dimensions: 9.88 x 9.75 x 11.5 in

Best for: Truck lifting with integrated support.

Why it ranks #1: Its 11-to-21-inch lift range suits taller vehicles, and the integrated ratcheting safety bar locks the stand; it is listed for pickups and SUVs.

A built-in ratcheting safety bar lets the Powerbuilt Unijack lift and hold a vehicle in one unit, combining a bottle jack and jackstand. Its 11-to-21-inch lift range and 6,000-pound capacity are aimed at pickups, SUVs, vans, and Jeeps, with a wide base for added stability.

Combining the bottle jack and jackstand means the lifting and holding functions are integrated rather than supplied as separate pieces. The ratcheting safety bar locks the jackstand in the raised position, while the 11-to-21-inch range suits the listed trucks, SUVs, vans, and Jeeps. Its 6,000-pound capacity and wide base support the product’s positioning for truck, RV, and off-road use. At 22.7 pounds, it remains a substantial item to carry or store alongside vehicle gear.

Skip it if you want a lighter, 2-ton integrated jack for a smaller vehicle; the Powerbuilt 620470 weighs 15.4 pounds.

Choose this Unijack for truck, SUV, van, or Jeep work where the integrated jackstand and 21-inch reach suit the lifting points. Its 6,000-pound rating remains the load boundary.

Listed on Amazon as: Powerbuilt 3 Ton, Bottle Jack and Jack Stands in One, 6000 Pound Capacity, All-in-One Car Lift, Heavy Duty Vehicle Unijack, Wide Base, 620471

#2 · Tallest Trolley Lift

2. BIG RED T83006 Trolley Jack

• Load Capacity: 3 tons (6,000 lbs)
• Material: Steel
• Compatible with Vehicle Type: Car, Sport Utility Vehicle, Truck, Van

Best for: Extended-height truck lifting.

Why it ranks #2: This truck- and SUV-compatible hydraulic trolley jack reaches 20-7/8 inches and has a 6,000-pound capacity with an extra saddle.

A maximum lift height of 20-7/8 inches gives the BIG RED T83006 useful reach for SUVs and extended-height trucks. Its 3-ton capacity and extra saddle make it a more truck-oriented trolley jack than compact car jacks, while the 5-7/8-inch minimum sets a boundary for low-clearance access.

The 3-ton, 6,000-pound rating covers a range of cars, trucks, vans, and SUVs according to the listing. Its 5-7/8-to-20-7/8-inch lifting range gives additional height for taller vehicles, and the included extra saddle is part of the model’s truck and SUV positioning. Two large steel casters and two 360-degree swivel casters support maneuvering the 36-pound jack around a service area, though that weight is worth considering when moving it between locations.

Skip it if you need access beneath a very low vehicle; the AV Steel AV-300102F starts at 3-1/8 inches.

This suits owners servicing trucks, SUVs, or vans who need trolley-jack maneuverability and a 20-7/8-inch maximum lift. Check that the 5-7/8-inch minimum clears the vehicle before choosing it.

Listed on Amazon as: BIG RED Hydraulic Trolley Service/Floor Jack with Extra Saddle (Fits: SUVs and Extended Height Trucks): 3 Ton (6,000 lb) Capacity, Red, T83006

#3 · Best Rough-Terrain Fit

3. Maxority Off-Road Floor Jack

• Load Capacity: 4400 lb
• Material: Steel
• Compatible with Vehicle Type: Car, Sport Utility Vehicle, Truck

Best for: Off-road terrain recovery.

Why it ranks #3: Its oversized wheels are designed for gravel, dirt, mud, and uneven terrain, with 4,400-pound capacity for trucks, SUVs, and ATVs.

Oversized wheels are specified to roll over gravel, dirt, mud, and uneven surfaces, helping this Maxority hydraulic jack reach outdoor repair locations. Its 2-ton, 4,400-pound capacity, adjustable-height saddle, and steel construction target trucks, SUVs, and ATVs where terrain mobility matters.

The big-wheel design is intended to move the jack across rough ground, making positioning for outdoor repairs more practical than carrying it over every uneven patch. A wide stance is listed to increase stability on challenging terrain, while the adjustable-height saddle provides a way to change the contact height. The 4,400-pound capacity sets a clear limit for trucks, SUVs, and ATVs. Its hydraulic quick-lift system is also identified in the description, with steel construction forming the main structure.

Skip it if your vehicle or lifting load exceeds 4,400 pounds; the BIG RED T90413 is rated for 8,000 pounds.

This fits off-road owners who need to position a hydraulic jack on gravel, dirt, or uneven ground for truck, SUV, or ATV repairs. Keep the 4,400-pound limit in mind.

Listed on Amazon as: 2 Ton (4,400 lbs) Hydraulic Off-Road Floor Jack with Big Wheels, Heavy-Duty Steel Construction, Adjustable Height Saddle for Trucks, SUVs & ATVs

#4 · Mechanical Lift

4. USYATO 2 Ton Spiral Jack

• Load Capacity: 4409 lb
• Material: Alloy Steel
• Compatible with Vehicle Type: Off-Road Vehicle, Pickup, RV, SUV, Truck, Van
• Dimensions: 4 x 4 x 7 in

Best for: Oil-free mechanical truck lifting.

Why it ranks #4: The oil-free screw mechanism avoids hydraulic fluid and lifts from 7 to 15.5 inches; compatibility includes pickups, trucks, SUVs, and RVs.

A purely mechanical screw mechanism lifts without hydraulic fluid, eliminating fluid leaks and seals that wear out, according to USYATO. The 2-ton jack is listed for trucks, SUVs, pickups, RVs, and vans, with a 7-to-15.5-inch range for buyers who value a no-fluid lifting system.

The threaded screw raises the load incrementally, which the listing describes as slower and more controlled than quick-lift hydraulic designs. Because the mechanism uses no hydraulic fluid, it avoids fluid leaks and seals subject to wear, a practical distinction for storage and maintenance. The 7-to-15.5-inch lift range gives a defined working window, and the 8-pound weight and 4-by-4-by-7-inch listed dimensions support compact storage. Its 2-ton rating sets the load ceiling for listed trucks, SUVs, and other vehicles.

Skip it if you need quick hydraulic lifting for frequent workshop jobs; the AV Steel AV-300102F has a dual-piston quick-lift pump.

This suits truck and SUV owners who prioritize a compact, oil-free mechanical jack and accept slower screw lifting. Match the 2-ton capacity and 15.5-inch maximum to the vehicle and task.

Listed on Amazon as: 2 Ton Spiral Jack Screw Jack for Truck SUV, 4000 lbs, 7-15.5" Lifting Range

#5 · Highest Capacity

5. BIG RED 4 Ton Bottle Jack

• Load Capacity: 4 Ton
• Material: Alloy Steel
• Compatible with Vehicle Type: Car
• Dimensions: 4.27 x 3.43 x 7.5 in

Best for: Portable bottle-jack lifting.

Why it ranks #5: Its 8,000-pound capacity is the highest listed, with a 7-1/2-to-14-5/16-inch range and adjustable screw-top extension.

A 4-ton, 8,000-pound capacity in a 6.2-pound bottle jack makes the BIG RED T90413 a portable option for residential or commercial lifting. Its 7-1/2-to-14-5/16-inch range and adjustable screw-top extension offer height adjustment, while the wide base is specified to enhance stability.

The bottle-jack format and included storage case, handles, and manual make this a compact kit to keep with vehicle or workshop equipment. Its 8,000-pound rating provides the stated load capacity, and the 7-1/2-to-14-5/16-inch range defines the available lift. The adjustable screw-top extension adds height versatility, while the wide, rugged base is intended to enhance stability. Drop-forged alloy steel and reinforced stress points are specified for construction; buyers should still ensure the available maximum height suits their vehicle.

Skip it if you need more than 14-5/16 inches of lift; the BIG RED T83006 reaches 20-7/8 inches.

This is a portable choice for buyers who want bottle-jack lifting, an adjustable extension, and a storage case. Its maximum height is 14-5/16 inches, a key limit for lifted-truck use.

Listed on Amazon as: BIG RED 4 Ton (8,000 LBs) Hydraulic Welded Bottle Jack with Storage Case

#6

6. Powerbuilt 2 Ton UniJack

• Load Capacity: 2 tons
• Material: Aluminum
• Compatible with Vehicle Type: Truck
• Dimensions: 7.25 x 8 x 9.5 in

Best for: Compact integrated vehicle support.

Why it ranks #6: The combined bottle jack and stand lifts from 8 to 15 inches and supports up to 4,000 pounds, but offers less height than the 3-ton model.

The Powerbuilt 620470 combines a hydraulic bottle jack and jackstand in one compact unit, letting owners lift and hold a vehicle without separate stands. Its 4,000-pound capacity is aimed at cars, CUVs, and small SUVs, and the listing also describes use on body-on-frame vehicles.

The all-in-one format combines lifting with holding, which avoids carrying a separate jackstand for the supported job. Powerbuilt lists the unit for both unibody and body-on-frame vehicles, and notes that factory-approved lifting points matter for unibody vehicles. Its 2-ton, 4,000-pound capacity makes the load limit explicit, while the 7.25-by-8-by-9.5-inch dimensions and 15.4-pound weight give buyers practical storage and portability information. The listing also mentions construction use for leveling deck joists.

Skip it if you need a 3-ton integrated jack for a heavier truck; the Powerbuilt 620471 has a 6,000-pound capacity.

This suits owners of cars, CUVs, or small SUVs who value an integrated lifting-and-holding unit and compact dimensions. Keep the 4,000-pound capacity and appropriate unibody lifting points in view.

Listed on Amazon as: Powerbuilt 2 Ton UniJack Combination Hydraulic Bottle Jack / Jackstand in 1 Unit, Compact, Portable, Wide Base, for Unibody Sedans, CUVs, SUVs, Cars, – 620470

#7

7. Maxority 3 Ton Low-Profile Jack

• Load Capacity: 6600 lb
• Material: Alloy Steel
• Compatible with Vehicle Type: Car

Best for: Low-clearance quick lifting.

Why it ranks #7: Its 6,600-pound capacity and extended reach suit low-clearance access, but the listed features do not provide a maximum lift height for tall trucks.

A low-profile frame with long reach helps this 3-ton Maxority jack access vehicles with minimal ground clearance, including lowered cars and vehicles with aftermarket modifications. Its dual-piston quick-lift pump is intended to speed raising, while the 6,600-pound capacity establishes its stated load limit.

The low-profile design addresses access beneath low-clearance vehicles, and the extended reach helps position the jack where a shorter-reach design may not reach. A dual-piston quick-lift pump is specified to raise the vehicle more quickly, which can reduce repeated pumping during maintenance. The 6,600-pound capacity gives a clear load ceiling, while alloy-steel construction identifies the main material. Its listed compatible vehicle type is car, so truck shoppers should take that stated compatibility into account.

Skip it if you need a jack specifically listed for trucks; the BIG RED T83006 explicitly covers trucks and SUVs.

This fits car owners needing a low-profile jack with extended reach and quick-lift pumping for workshop maintenance. Its listed compatibility is car, so truck owners should weigh that boundary before selecting it.

Listed on Amazon as: Maxority 3-Ton (6600lbs) Low Profile Hydraulic Heavy-Duty Steel Floor Jack with Dual Pistons Quick Lift Pump, Home and Workshop Car Maintenance for Various Vehicles (Random Color, 3 Ton Low Profile)

#8

8. AV Steel 3 Ton Floor Jack

• Load Capacity: 6600 lb
• Material: Alloy Steel
• Compatible with Vehicle Type: Car
• Dimensions: 31.7 x 15.8 x 8.3 in

Best for: Low-entry high-reach floor jack.

Why it ranks #8: It offers a 6,600-pound capacity and a 3-1/8-to-19-7/8-inch range, though its low-profile design targets limited-clearance vehicles rather than tall trucks.

A 3-1/8-inch minimum height paired with a 19-7/8-inch maximum gives this AV Steel floor jack both low-entry access and substantial lifting reach. Its 3-ton, 6,600-pound capacity and dual-piston quick-lift pump make it a fit to consider for vehicle work where both clearance and height matter.

The 3-1/8-inch minimum height helps the jack reach beneath low-riding vehicles, while the 19-7/8-inch maximum gives more lift range for service work. Its 3-ton capacity is rated at 6,600 pounds, and the dual-piston quick-lift pump is a named feature for raising the vehicle. Alloy-steel construction is specified, and the 31.7-by-15.8-by-8.3-inch listed dimensions are relevant when planning garage storage or positioning the jack around a vehicle.

Skip it if you have limited garage storage space; the compact Powerbuilt 620470 measures 7.25 by 8 by 9.5 inches.

Choose this floor jack when low entry clearance and a nearly 20-inch maximum lift suit the vehicle and service task. Its listed footprint is substantial, so account for storage and positioning space.

Listed on Amazon as: AV Steel Low Profile Floor Jack 3 Ton (6600 lbs), Heavy Duty Hydraulic Jack for Car, Heavy-Duty Floor Jack with Dual Pistons Quick Lift Pump, Car Floor Jack with Lifting Range 3-1/8'' to 19-7/8''

#9

9. VEVOR 2.5 Ton Floor Jack

• Load Capacity: 2.5 tons
• Material: Steel
• Compatible with Vehicle Type: Truck
• Dimensions: 22.2 x 8.7 x 5.2 in

Best for: Low-profile mixed-vehicle lifting.

Why it ranks #9: The 5,500-pound capacity and 14.96-inch maximum provide some reach, but the low-profile floor-jack design is a weaker fit for lifted trucks.

An 85 mm (3.35-inch) minimum height lets this VEVOR floor jack slide beneath many low-clearance vehicles, while its 2.5-ton capacity supports lifting up to 5,500 pounds. The 14.96-inch maximum gives it a broad working range for family cars, trucks, and SUVs listed by the manufacturer.

The low 3.35-inch starting point helps with access under vehicles that leave little room for a jack, and the 14.96-inch maximum provides more lift than that initial clearance alone. With a 2.5-ton, 5,500-pound capacity and steel construction, the jack is presented for vehicle maintenance including tire, oil, and brake work. Its 22.2-by-8.7-by-5.2-inch dimensions are useful to consider when planning storage, especially if it will be kept with other garage equipment.

Skip it if you need a higher maximum lift for a raised truck; the Powerbuilt 620471 reaches 21 inches.

Pick this for mixed car, truck, or SUV maintenance when low entry height and a 14.96-inch ceiling suit the job. Buyers should compare that maximum with their truck’s required service height.

Listed on Amazon as: VEVOR 2.5 Ton Low Profile Heavy-Duty Steel Racing Floor Jack

#10

10. DNA MOTORING 2 Ton Floor Jack

• Load Capacity: 2 tons
• Material: Alloy Steel
• Compatible with Vehicle Type: Car
• Dimensions: 10 x 19 x 8 in

Best for: Low-clearance car service.

Why it ranks #10: Its 13-inch maximum lift and 4,000-pound capacity are limited for lifted trucks, and the listing specifically says it is not recommended for pickups.

A 5.1-inch minimum lifting height lets this 2-ton trolley jack get under many cars that sit low, while its hydraulic lift reaches 13 inches. That range suits routine garage work on compatible passenger vehicles, but the listing specifically advises against using it for pickups, trucks, or very large SUVs.

The 4,000-pound capacity and 5.1-to-13-inch lifting range make this a car-focused option for jobs such as wheel or underbody service when the vehicle falls within its stated limits. Its alloy-steel construction provides the jack’s structural material, and the 10-by-19-inch dimensions give buyers a sense of its garage footprint. DNA Motoring lists vehicle compatibility as car and explicitly does not recommend it for pickups, trucks, or very large SUVs, so lifted-truck shoppers should look elsewhere.

Skip it if you need a jack for a pickup or lifted truck; the BIG RED T83006 is listed for trucks and reaches 20-7/8 inches.

Choose this for garage service on compatible passenger cars where a 5.1-inch starting height and 13-inch maximum are sufficient. Its stated vehicle limits rule it out for pickup and lifted-truck work.

Listed on Amazon as: DNA Motoring TOOLS-00234 Low Profile Hydraulic Trolley Service/Floor Jack, 2 Ton (4000 lbs) Capacity, Lifting Range 5.1"-13", Black