Best Studs For Snowmobile Track: Compare 10 Options

#1 · Best Overall

1. Icemasters 3⁄4-Inch Studs

Best for: No-drill lug traction upgrade.

Why it ranks #1: Snowmobile-specific screw-in studs add a 70-degree carbide tip and self-tapping threads, with no drilling; the listing warns against lugs under 1⁄2 inch thick.

Self-tapping threads let these Icemasters install without drilling, enabling a screw-in traction upgrade for snowmobile tracks. Their 70-degree carbide tips are intended to improve lateral grip, acceleration, and braking, while the 3/4-inch length offers a shorter option for riders selecting studs for suitable lug thickness.

The 70-degree carbide tip is specified for positive traction and control, supporting grip during cornering, acceleration, and braking. Self-tapping threads avoid drilling, which simplifies installation compared with a drilled-track approach. Icemasters mount on top of the lugs in their thicker section for a better bite. Before installing, check lug thickness carefully: the supplied guidance rules out any lug or lug portion under 1/2 inch. This package is the 3/4-inch stud option and includes an installation tool.

Skip it if you need studs for lug sections under 1/2 inch; the stated installation guidance rules out those locations.

Choose these for a no-drill installation and added lateral traction, acceleration, and braking on a track with sufficiently thick lugs. The 3/4-inch length is the key fit consideration; avoid any lug section below 1/2 inch.

Listed on Amazon as: Icemasters Snowmobile Track Traction Studs – 3/4'' Screw-in Traction Studs + Installation Tool

#2 · Longer Screw-In Option

2. Icemasters 1-Inch Studs

Best for: Longer no-drill screw-in studs.

Why it ranks #2: Shares the 70-degree carbide tip and no-drill self-tapping design, while its 1-inch length suits buyers seeking the longer listed Icemasters option.

The one-inch length distinguishes this Icemasters screw-in set from the shorter option, while its self-tapping threads allow installation without drilling. A 70-degree carbide tip is specified to aid traction and control, with the intended benefits spanning lateral grip, acceleration, and braking.

Self-tapping threads make this a no-drill installation, reducing the steps involved in adding traction hardware to a suitable track. The 70-degree carbide tip is intended to improve positive traction and control, including lateral traction, acceleration, and braking. Icemasters are mounted atop the thicker part of the lugs for a better bite. The supplied guidance says not to install in any lug section under 1/2 inch, so check thickness at each proposed location before fitting the one-inch studs.

Skip it if you have proposed mounting points with less than 1/2-inch lug thickness; the product guidance rules out those locations.

Pick these for a no-drill traction upgrade when the longer one-inch length suits your track setup. The 70-degree carbide tip targets control and grip, but every installation point must have at least 1/2-inch lug thickness.

Listed on Amazon as: Icemasters Snowmobile Track Traction Studs – 1'' Screw-in Traction Studs + Installation Tool, Increases Lateral Traction, Acceleration and Braking

#3 · Largest Listed Pack

3. Stud Boy Power Point

• Weight: 5.94 lb

Best for: Trail and track stud setup.

Why it ranks #3: This trail and track-oriented set includes 96 studs, a 60-degree carbide point, and a 1-inch track-trapping head for support.

A 60-degree carbide point gives Stud Boy’s 1.500-inch Power Point studs a defined penetration-focused profile for trail or track use. The 96-pack suits buyers assembling a larger stud layout, while the one-inch track-trapping head is specified to provide support and reduce track “cookie” wear.

The 60-degree carbide point is described as offering penetration and strength, a practical match for riders seeking a stud for both trail and track use. Its one-inch track-trapping head provides support and is intended to reduce cookie wear, addressing a key track-contact concern. The 1.500-inch stud length and 96-piece quantity give the buyer clear planning details for a larger installation. The listing does not provide additional track-height guidance, so the stated dimensions should guide selection.

Skip it if you need a stated track-height match before choosing; this listing provides stud length but no track-height specification.

A fit for trail and track riders who want 96 Power Point studs with a 60-degree carbide point and a supported, one-inch head. Check your track requirements against the 1.500-inch length before planning the layout.

Listed on Amazon as: Stud Boy 1.500" Power Point Studs – 96 Pack

#4 · Carbide Plus Studs

4. Stud Boy Power Point Plus Pro

• Weight: 2.6 lb
• Thread Size: 5/16-24
• Size Name: 8x7x1

Best for: Carbide 48-pack installer.

Why it ranks #4: A 48-pack of carbide push-through studs with a 1.375-inch length and 5/16-24 thread, offering a clearly specified conventional option.

Carbide construction is the clearest defined feature of these Stud Boy Power Point Plus Pro studs, giving buyers a material-specific choice in a 1.375-inch, 48-piece pack. The 5/16-24 right-hand thread and beveled head also provide concrete hardware details for planning a compatible installation.

The 1.375-inch length and 48-piece quantity make this pack straightforward to evaluate when planning a stud layout. Carbide is specified for both the stud and fastener material, giving buyers a consistent material profile across the hardware. The 5/16-24 right-hand thread identifies the threaded interface, while the beveled head describes the head style for installation planning. The supplied information does not state track-height compatibility, so buyers should base selection on the listed dimensions and their setup requirements.

Skip it if you require a listed track-height match; the supplied details identify dimensions and threads but do not state one.

Consider this pack if you need 48 carbide Power Point Plus Pro studs and can use the stated 1.375-inch length and 5/16-24 right-hand thread. Track-height compatibility is not provided in the listing details.

Listed on Amazon as: Stud Boy 18-33046 Power Point Plus Pro Studs 1.375" 48/Pk

#5 · Specified Lug Range

5. Woody's Gold Digger 1325

• Weight: 1 lb

Best for: Two-ply track push-through setup.

Why it ranks #5: Designed for 1.220- to 1.250-inch lug height, this 24-piece set includes nuts and uses a 60-degree carbide insert and track-trapping head.

Woody’s 1325 Series is specified for 1.220- to 1.250-inch lug heights, giving two-ply track owners a defined fit range to work from. Its 60-degree carbide insert and patented track-trapping head support a push-through setup, and the 24-piece pack includes matching nuts.

The stated 1.220- to 1.250-inch lug-height range helps narrow fit decisions for riders with two-ply tracks and support plates. A 60-degree carbide insert is paired with through-hardened carbon steel, while the one-inch patented track-trapping head is intended to provide rigidity and support. The 24-stud, 24-nut pack supplies matching hardware for installation planning. Woody’s describes the studs for starting, stopping, and turning on trails or while boondocking, making those the listed use contexts.

Skip it if you need more than 24 studs for your planned layout; this pack contains 24 studs and 24 nuts.

A sensible match for two-ply track owners whose lug height falls within the specified 1.220- to 1.250-inch range. It suits trail and boondocking use, but plan around the 24-stud pack quantity.

Listed on Amazon as: Woody's Gold Digger Traction Master 1325 Series Snowmobile Studs – 24 Piece Pack

#6

6. Stud Boy Power Point Plus 1.625

• Weight: 5.78 lb

Best for: 84-piece long-stud layout.

Why it ranks #6: The listed 84-pack length is 1.625 inches and the product title specifies locknuts, making this a useful longer push-through choice.

The 1.625-inch length sets these Stud Boy Power Point Plus carbide studs apart as a longer option in an 84-piece package. Locknuts are included, giving buyers a defined hardware bundle for planning installation rather than sourcing the nuts separately.

An 84-stud quantity gives buyers a clear count for mapping a larger layout, and the stated 1.625-inch length identifies the stud size to account for in that plan. The product is named as Power Point Plus carbide studs, providing the listed carbide construction and series identity. Locknuts are included, so the package provides those retaining components alongside the studs. The supplied product details do not state a track-height range or tip angle, making the specified length and included hardware the available selection facts.

Skip it if you need a listed track-height compatibility range before selecting studs; the supplied details give length but no range.

Consider this 84-piece package if the 1.625-inch length suits your track plan and included locknuts simplify hardware preparation. Track-height guidance is not supplied, so the stated length is the key fit detail.

Listed on Amazon as: Stud Boy 18-33028 Power Point Plus Carbide Studs 1.625" 84/Pk

#7

7. Stud Boy SPT Pro

• Weight: 2 lb
• Thread Size: 5/16 inch
• Size Name: 8x6x1

Best for: Super-Lite backer pairing.

Why it ranks #7: This 48-pack has carbide studs in 1.375-inch length and is described as suitable for 1.25-inch track height, but nuts are not included.

Stud Boy’s SPT Pro Series is identified as a 1.375-inch carbide stud recommended with Super-Lite Pro Series backers, giving buyers a specific pairing to consider. The 48-pack supports a larger layout, while the listing notes that nuts are not included.

The stated recommendation for Super-Lite Pro Series backers gives buyers a concrete pairing to consider when assembling a track setup. These 1.375-inch SPT Pro Series studs use carbide material, and the 48-piece quantity helps with layout planning. A 5/16-inch thread and partially threaded profile supply useful hardware details. The listing explicitly says the studs come without nuts, so the installer must account for that when preparing the hardware rather than assuming a complete nut-and-stud pack.

Skip it if you need studs and nuts together in one pack; these SPT Pro Series studs are supplied without nuts.

This suits riders pairing 1.375-inch SPT Pro Series studs with Super-Lite Pro Series backers and planning a 48-stud layout. Allow for separately sourced nuts, since they are not included.

Listed on Amazon as: Stud Boy Spt Carbide Studs 48/Pk 1.375

#8

8. Stud Boy SPT Carbide 24

• Weight: 1.2 lb
• Thread Size: 1.375-inch
• Size Name: 8x7x1

Best for: Corrosion-resistant 24-pack.

Why it ranks #8: A 24-pack with an 80-degree carbide tip, 5/16-inch shank, and 15/16-inch head; the listing identifies it for 1.25-inch track height.

A zinc finish gives these Stud Boy SPT carbide studs a stated measure of resistance to corrosion and the elements. Their 80-degree carbide tips, 15/16-inch heads, and 24-piece quantity provide useful details for riders considering a 1.375-inch stud for a track listed at 1.25 inches high.

The listing identifies these studs for a 1.25-inch track height, helping buyers assess a specific fit rather than relying on length alone. An 80-degree carbide tip and 5/16-inch shank are specified for durability, while the large 15/16-inch head is intended to reduce track wear. Zinc finishing resists corrosion and the elements, a practical feature for exposed hardware. The 24-piece pack supports a limited layout or replacement plan; check the stated track-height detail against your setup.

Skip it if you need more than 24 studs for your layout; this SPT pack contains 24 pieces.

A fit for riders whose track height matches the stated 1.25 inches and who value a corrosion-resistant finish and head intended to reduce wear. The 24-piece count is the main layout boundary.

Listed on Amazon as: Stud Boy SPT Carbide Studs 1.375" 24/Pack

#9

9. Stud Boy Power Point Push-Through

• Weight: 1.5 lb
• Thread Size: 5/16in. – 24
• Size Name: 5/16-24

Best for: Push-through carbide replacement.

Why it ranks #9: The 1.375-inch push-through stud has a 60-degree carbide point and 1-inch head, but the package description says it contains 10.

A large one-inch head is specified to help prevent pull-through, giving this Stud Boy Power Point push-through stud a clear track-support feature. Its 60-degree carbide point targets penetration and durability, while the 1.375-inch length and 5/16-24 thread help define installation requirements.

The one-inch head is intended to resist pulling through the track, addressing support at the stud head during use. A 60-degree carbide point is specified for penetration and durability, while heat treatment is listed for high strength and wear resistance. The 1.375-inch length, 5/16-24 thread, and 1.38-inch compatible groove diameter give buyers concrete dimensions for planning fit and installation. The package description states ten studs, a quantity to factor into the intended layout.

Skip it if you need more than ten studs for your layout; the package description lists ten push-through studs.

Choose this for a push-through installation where the one-inch head, carbide point, and stated thread details suit your setup. Its ten-stud package is best suited to a smaller planned layout or a limited replacement need.

Listed on Amazon as: STUD BOY Power Point Push-Through Snow Stud 1.375"

#10

10. Aulpq Winter Tire Studs

• Thread Size: 1/2"
• Size Name: 1/2" 250 Pack (#8)

Best for: Bulk winter traction screw kit.

Why it ranks #10: Although the listing mentions snowmobile tracks, these are general winter tire screws rather than a clearly specified snowmobile track-stud system.

A 250-piece quantity makes these Aulpq 1/2-inch tire studs a bulk option for winter traction projects spanning snowmobile tracks and other listed vehicles. Their V-shaped cutting heads and vibration-lock teeth are specified to dig into ice and snow and fit tightly onto the tire.

The V-shaped cutting head has two edges intended to dig into ice and snow, which supports the product’s stated winter-grip use on snowmobile tracks, motorcycles, dirt bikes, and ATVs. Vibration-lock teeth beneath the screw head are described as helping the screws fit tightly onto the tire. The 1/2-inch size and 250-piece pack help buyers plan a larger installation, while the right-hand thread and diamond point provide additional hardware details for setup decisions.

Skip it if you need a stated snowmobile track-height range before buying; the listing specifies stud size but not track-height compatibility.

Choose this bulk pack for winter traction projects where 1/2-inch screws suit the application and the multi-vehicle compatibility is useful. The listing includes snowmobile tracks, but does not provide a track-height range.

Listed on Amazon as: 1/2" 250 Pack (#8)- Winter Ice & Snow Tire Heavy Duty Studs Spikes for Motorcycles, Snowmobiles Tracks, Racing Dirt Bikes, and ATVs