A strong choice for truck use must match the vehicle or equipment being moved, provide enough rated capacity, and fit the loading or shop setup. The OTC TR2010 20-ton Truck Loading Ramps are the most directly suited to heavy-duty truck wheels, with wheels for positioning, a retractable handle, and a 20-ton pair capacity. For loading equipment into a pickup or trailer, the KROAK 7.5FT Aluminum Ramps offer a 1,800-pound total rating and folding storage, while the Stalwart ramps provide a 2,200-pound combined rating.
These products serve different jobs, so compare ramp style, dimensions, and capacity rather than treating them as interchangeable. Check the product’s stated load limit and wheel-width fit before choosing.
The OTC TR2010 20-ton Truck Loading Ramps lead for heavy-duty truck use because they are specifically described for semi-trucks and tractor-trailers, with a 20-ton pair capacity and 10-inch ramp width. Their 5-inch wheels and retractable 33-inch T-handle help position them on a shop floor, while recessed wheels and non-skid rubber matting address storage and movement. They suit truck tires under 10 inches wide; pickup-bed equipment loading calls for a different ramp style.
Our Top Picks
Best OverallPurpose-built for semi-trucks and tractor-trailers, this pair is rated for 20 tons and has 10-inch ramps, positioning wheels, and a retractable handle.
View on Amazon
Best Folding PairThe 90-inch aluminum pair supports 1,800 pounds total and folds to 45.8 inches per ramp, suiting pickup and trailer equipment loading.
View on Amazon
Highest Pair CapacityTwo 77-inch alloy-steel ramps provide a listed 2,200-pound combined capacity for loading ATVs, motorcycles, mowers, and similar equipment.
View on Amazon- Long Steel Pair Evcitn 75-Inch Ramps
- Wide Single Ramp GarveeTech Tri-Fold Ramp
Compare truck ramp types, capacities, and uses
| # | Product | Load Capacity | Material | Dimensions | Weight | Buy |
|---|---|---|---|---|---|---|
| 1 | 1. OTC TR2010 Truck RampsBest Overall | 20 Ton | Stainless Steel | 47"L x 13.5"W x 9.25"H | 230 lb | View on Amazon |
| 2 | 2. KROAK Aluminum RampsBest Folding Pair | 1800 lb | Aluminum | 90"L x 12"W x 12"H | 33.2 lb | View on Amazon |
| 3 | 3. Stalwart Folding RampsHighest Pair Capacity | 2200 lb | Alloy Steel | 77"L x 8.86"W x 1.57"H | — | View on Amazon |
| 4 |  4. Evcitn 75-Inch RampsLong Steel Pair | 1500 lb | Iron, Metal, Plastic, Stainless Steel | 78.7"L x 47.2"W x 7.5"H | 36.4 lb | View on Amazon |
| 5 |  5. GarveeTech Tri-Fold RampWide Single Ramp | 1500 lb | Aluminum | 76.38"L x 49.61"W x 1.97"H | 38.7 lb | View on Amazon |
| 6 |  6. PioneerWorks Steel RampsNarrow-track equipment loading | 1000 lb | — | 76.38"L x 9.06"W x 1.97"H | 39.3 lb | View on Amazon |
Detailed Reviews: Best Roller Ramps For Trucks
#1 · Best Overall
1. OTC TR2010 Truck Ramps
- Load Capacity: 20 Ton
- Material: Stainless Steel
- Dimensions: 47"L x 13.5"W x 9.25"H
- Weight: 230 lb
Best for: Shop-floor heavy vehicle loading.
Why it ranks #1: Purpose-built for semi-trucks and tractor-trailers, this pair is rated for 20 tons and has 10-inch ramps, positioning wheels, and a retractable handle.
A 20-ton capacity makes the OTC TR2010 pair the heavy-vehicle option for semi-trucks, tractor-trailers, and other vehicles with wheel widths under 10 inches. Five-inch wheels help move each ramp around the shop floor, while a retractable 33-inch T-handle aids positioning and stows into the ramp body.
The 10-inch-wide ramps target heavy-duty vehicle tires narrower than 10 inches, making wheel width a decisive fit check. Five-inch wheels raise the ramps for movement around a shop floor, while the retractable T-handle gives the operator a way to maneuver them and then retracts to eliminate a trip hazard. Recessed wheels stow inside the ramp body during use. Non-skid rubber matting underneath helps prevent ramp slippage while loading and unloading.
- 20-ton capacity per pair
- 5-inch wheels for shop-floor movement
- Retractable 33-inch T-handle
- Non-skid rubber matting underneath
- The 10-inch ramp width is specified for wheel widths under 10 inches.
Skip it if you need lightweight ramps for an ATV or mower; KROAK’s aluminum pair weighs 33.2 pounds and folds to 45.8 inches.
This pair is for shops positioning semi-trucks, tractor-trailers, or other heavy vehicles with tires under 10 inches wide. Its 230-pound listed item weight and vehicle-width requirement make it a specialized choice, not a general pickup ramp.
Full product details
| Brand | OTC |
|---|---|
| Color | Blue |
| Dimensions | 47"L x 13.5"W x 9.25"H |
| Item Weight | 230 pounds |
| Load Capacity | 20 Ton |
| Manufacturer | OTC Tools |
| Part Number | TR2010 |
| Manufacturer Warranty Description | Lifetime warranty does not cover abuse. |
| Material | Stainless Steel |
| Model Number | TR2010 |
Listed on Amazon as: OTC TR2010 20-ton Truck Loading Ramps (Pair)
View on Amazon#2 · Best Folding Pair
2. KROAK Aluminum Ramps
- Load Capacity: 1800 lb
- Material: Aluminum
- Dimensions: 90"L x 12"W x 12"H
- Weight: 33.2 lb
Best for: Quick-fold aluminum equipment ramps.
Why it ranks #2: The 90-inch aluminum pair supports 1,800 pounds total and folds to 45.8 inches per ramp, suiting pickup and trailer equipment loading.
KROAK’s 90-inch aluminum ramps fold in one second and store at 45.8 inches each, enabling quicker packing into a truck bed or garage than their full length suggests. The two-ramp set is rated for 1,800 pounds total and is listed for motorcycles, ATVs, lawn mowers, and small vehicles.
The 90-inch length offers a long ramp approach for loading, while the quick-folding mechanism reduces each ramp to a 45.8-inch stored length for truck-bed or garage storage. Aluminum alloy construction keeps the pair’s listed weight at 33.2 pounds, supporting easier handling than a heavier steel set. The 1,800-pound figure is the total capacity, not a per-ramp rating. Load straps are included, and the product listing also identifies use with UTVs and small tractors.
- 90-inch ramp length
- Folds to 45.8 inches per ramp
- Aluminum alloy construction
- 1,800-pound total capacity with load straps
- The 1,800-pound rating is for the pair, not each ramp.
Skip it if you need a wider single loading surface; GarveeTech’s aluminum ramp measures nearly 50 inches wide.
These ramps suit truck and trailer owners loading motorcycles, ATVs, lawn mowers, UTVs, or small tractors who value compact storage. Assess the 1,800-pound pair limit and the 45.8-inch folded length against your load and storage space.
Full product details
| Brand | KROAK |
|---|---|
| Color | Silver |
| Dimensions | 90"L x 12"W x 12"H |
| Item Weight | 33.2 pounds |
| Load Capacity | 1800 pounds |
| Manufacturer | KROAK |
| Part Number | Kroak1 |
| Material | Aluminum |
| Model Number | 1800Lbs Max |
#3 · Highest Pair Capacity
3. Stalwart Folding Ramps
- Load Capacity: 2200 lb
- Material: Alloy Steel
- Dimensions: 77"L x 8.86"W x 1.57"H
Best for: Higher-capacity folding ramp pair.
Why it ranks #3: Two 77-inch alloy-steel ramps provide a listed 2,200-pound combined capacity for loading ATVs, motorcycles, mowers, and similar equipment.
A 2,200-pound combined capacity gives Stalwart’s two 77-inch folding ramps a higher stated load limit for ATVs, motorcycles, golf carts, and mowers entering a truck, trailer, or shed. Each ramp is rated for 1,100 pounds, and the listed recommended usage height is 38 inches.
The 77-inch length and recommended 38-inch usage height help buyers assess whether the ramp geometry suits their loading location. Each ramp supports up to 1,100 pounds, while using both together raises the combined rating to 2,200 pounds for four-wheeled vehicles. They can also be used separately for motorcycles and dirt bikes, according to the supplied description. Their foldable design supports storage after use, and the low-profile form is intended for loading into trucks, trailers, or sheds.
- 2,200-pound combined capacity
- 1,100-pound rating per ramp
- 77-inch ramp length
- Folding, low-profile design
- The stated recommended usage height is 38 inches.
Skip it if you need ramps for a semi-truck; OTC TR2010 is listed for heavy-duty vehicles with wheel widths under 10 inches.
This set suits buyers moving ATVs, motorcycles, golf carts, or mowers into a truck, trailer, or shed, especially when folding storage matters. Check the 38-inch recommended usage height against the loading location.
Full product details
| Brand | Stalwart |
|---|---|
| Color | Silver |
| Dimensions | 77"L x 8.86"W x 1.57"H |
| Load Capacity | 2200 Pounds |
| Manufacturer | Trademark Global |
| Part Number | 75-CAR2024 |
| Material | Alloy Steel |
| Model Number | 75-CAR2024 |
Listed on Amazon as: Loading Ramps – Set of Two 77-Inch Folding Ramps for ATVs, Motorcycles, Mowers, Carts, and More – 2200lb Combined Capacity Car Ramp Set by Stalwart
View on Amazon#4 · Long Steel Pair
4. Evcitn 75-Inch Ramps
- Load Capacity: 1500 lb
- Material: Iron, Metal, Plastic, Stainless Steel
- Dimensions: 78.7"L x 47.2"W x 7.5"H
- Weight: 36.4 lb
Best for: Long ramps for mixed equipment.
Why it ranks #4: These 75-inch ramps are rated for 1,500 pounds per pair and use textured, perforated surfaces for loading motorcycles, ATVs, and lawn mowers.
A 75-inch ramp pair rated for 1,500 pounds gives Evcitn buyers a long approach for loading lawn mowers, motorcycles, dirt bikes, ATVs, and UTVs into a pickup. Reinforced construction and professional welding support the pair’s stated capacity, while textured, perforated treads add traction across the ramp surface.
At 75 inches long, these ramps provide a longer loading run than compact ramps, which can suit equipment heading into a truck bed. The 1,500-pound rating applies to the pair, so buyers need to account for the combined load rather than treating each ramp as independently rated. Textured, perforated surfaces support tire grip, and the stated stainless-steel construction offers a durable metal ramp; the listed material specification also includes iron, metal, and plastic.
- 75-inch ramp length
- 1,500-pound capacity per pair
- Textured, perforated anti-slip surface
- Reinforced construction with professional welding
- The 1,500-pound rating is for the pair, not each ramp.
Skip it if you need a stated per-ramp rating; PioneerWorks lists 500 pounds for each of its two ramps.
This pair suits truck owners loading lawn mowers, motorcycles, dirt bikes, ATVs, or UTVs who want a 75-inch approach and textured traction. Keep the 1,500-pound pair limit in view when assessing the full load.
Full product details
| Brand | Evcitn |
|---|---|
| Color | Black |
| Dimensions | 78.7"L x 47.2"W x 7.5"H |
| Item Weight | 36.4 pounds |
| Load Capacity | 1500 Pounds |
| Manufacturer | Evcitn |
| Part Number | RP001-1.8M-2PCS-SV-01 |
| Material | Iron, Metal, Plastic, Stainless Steel |
| Model Number | GCT001 |
Listed on Amazon as: Truck Ramps 75" 1500 LBS 2 Pack, Extra Heavy Duty Loading Ramps for Lawn Mower, Portabe Non Slip Motorcycle Ramps for Pickup Trucks, ATV, Dirt Bikes, UTV
View on Amazon#5 · Wide Single Ramp
5. GarveeTech Tri-Fold Ramp
- Load Capacity: 1500 lb
- Material: Aluminum
- Dimensions: 76.38"L x 49.61"W x 1.97"H
- Weight: 38.7 lb
Best for: Folding wide-surface ramp users.
Why it ranks #5: Its 76-inch-by-50-inch aluminum platform has a 1,500-pound total rating and folds to one-third size for pickup-bed and trailer loading.
A 50-inch-wide aluminum loading surface gives the GarveeTech ramp a broad platform for positioning equipment at a pickup, while its tri-fold design reduces it to one-third of its size for transport or storage. The ramp is listed at 76 inches long and rated for 1,500 pounds total.
The single, 50-inch-wide surface can simplify positioning compared with handling two narrow tracks, and the 76-inch length suits pickup loading. Aluminum keeps the ramp described as lightweight while the stated 1,500-pound total capacity supports the listed use cases, including motorcycles, ATVs, UTVs, tractors, and lawnmowers. After loading, the tri-fold format compacts to one-third of its size, making it easier to transport or store. The supplied description also lists load straps and treads.
- 50-inch-wide single ramp surface
- 76-inch ramp length
- Folds to one-third of its size
- Aluminum construction with 1,500-pound total capacity
- Its 1,500-pound capacity is a total ramp rating, not a per-ramp figure.
Skip it if you need a 1,800-pound pair rating; KROAK’s 7.5-foot aluminum ramps list that higher total capacity.
This ramp fits pickup owners who want a broad loading surface and a folding format for transport or home storage. Its stated 1,500-pound total capacity is the key boundary when choosing equipment to load.
Full product details
| Brand | GarveeTech |
|---|---|
| Color | Silver- |
| Dimensions | 76.38"L x 49.61"W x 1.97"H |
| Item Weight | 38.7 pounds |
| Load Capacity | 1500 pounds |
| Manufacturer | GarveeTech |
| Part Number | C0BQwq5bJxJ7hjh1qVhFTAIId11H |
| Material | Aluminum |
| Model Number | C0BQwq5bJxJ7hjh1qVhFTArl7O1l |
Listed on Amazon as: Aluminum Tri-Fold Ramp with Treads, Ramps for Pickup Trucks 76"x50"
View on Amazon#6
6. PioneerWorks Steel Ramps
- Load Capacity: 1000 lb
- Dimensions: 76.38"L x 9.06"W x 1.97"H
- Weight: 39.3 lb
Best for: Narrow-track equipment loading.
Why it ranks #6: This 72-inch pair has a 1,000-pound combined limit, making it the lowest-capacity option here for lighter motorcycles, bikes, and small equipment.
Two 72-inch steel ramps, each 9 inches wide, give the PioneerWorks set separate tracks for loading equipment into a truck bed, trailer, shed, or garage. Their punched, textured surfaces add tire grip while letting water drain, and the pair is rated for 1,000 pounds total, with a 500-pound limit on each ramp.
The two-track layout suits equipment with wheels that can be positioned on separate 9-inch-wide ramps, and the 72-inch length provides the listed approach for truck-bed, trailer, shed, or garage loading. Capacity is split between the ramps: 500 pounds each and 1,000 pounds combined, so buyers must balance the load and observe each ramp’s limit. Punched textured steel improves tire traction, while the openings allow water drainage and easier cleaning; the steel is described as rust-resistant.
- Two ramps, each 72 inches long
- 500-pound rating per ramp
- Punched, textured surface with water drainage
- Rust-resistant steel construction
- Each ramp is limited to 500 pounds, even when the pair is used.
Skip it if you need a 2,200-pound combined rating; Stalwart’s 77-inch folding pair is listed at that capacity.
Choose this pair for motorcycles, dirt bikes, e-bikes, bicycles, ATVs, lawn mowers, or snow blowers that fit its narrow tracks. Keep both the 500-pound per-ramp limit and 1,000-pound combined limit in mind.
Full product details
| Brand | PioneerWorks |
|---|---|
| Color | Silver |
| Dimensions | 76.38"L x 9.06"W x 1.97"H |
| Item Weight | 39.3 pounds |
| Load Capacity | 1000 Pounds |
| Manufacturer | PioneerWorks |
| Part Number | a |
| Model Number | aR2-x1nlL-0bgeWb77B1zOC-dbnif |
Listed on Amazon as: PioneerWorks 2-Pack 72" Steel Ramps – 500 lb Each / 1,000 lb Pair,Silver
View on AmazonAvoid confusing shop ramps with loading ramps
The biggest compatibility trap is assuming every product called a truck ramp loads equipment into a pickup bed. The OTC TR2010 is described for supporting semi-trucks and tractor-trailers, with 10-inch ramps intended for wheel widths under 10 inches; its wheels and retractable handle help move the ramps around a shop floor. It is not described as a pair of long tracks for driving an ATV into a truck bed.
Conversely, the KROAK, Stalwart, Evcitn, GarveeTech, and PioneerWorks options are described for loading equipment such as motorcycles, mowers, or ATVs into trucks, trailers, sheds, or garages. Decide whether the ramp must meet a vehicle tire for service or bridge from the ground to a raised bed.
For the OTC, check the tire-width limit. For loading ramps, compare their length and width with the equipment’s tires and the truck’s loading surface.
Why a pair’s total rating is not a per-ramp rating
A pair’s combined capacity does not mean either individual ramp can carry that full load. PioneerWorks explicitly lists 500 pounds per ramp and 1,000 pounds for the pair, and says to use both ramps for balanced loading. Stalwart lists 1,100 pounds for each ramp and 2,200 pounds combined.
Evcitn states 1,500 pounds per pair, while KROAK lists 1,800 pounds total. GarveeTech describes a single ramp surface rated for 1,500 pounds, so its capacity format differs from two-track sets.
Confirm how the manufacturer states the limit, then account for how the load is distributed across the ramp or ramps. A machine’s total weight alone is not enough if its wheels do not share the load evenly. Do not exceed either an individual ramp’s rating or the applicable combined rating.
How to Choose Truck Loading Ramps
Capacity and rating format
Look for a capacity that exceeds the load and make sure you understand whether the rating applies to each ramp or the set. The listings range from PioneerWorks at 1,000 pounds per pair, through Evcitn at 1,500 pounds per pair and KROAK at 1,800 pounds total, to Stalwart at 2,200 pounds combined. GarveeTech lists 1,500 pounds for its single ramp surface; OTC is rated for 20 tons as a pair.
These figures are not directly interchangeable because the products serve different vehicle types and state capacity differently. Lighter equipment buyers may find the lower-capacity pairs appropriate if their load falls within the stated limit.
Heavy-duty truck users should consider the OTC’s distinct 20-ton rating and verify wheel-width compatibility.
Ramp length and usable width
Choose dimensions that suit both the height you need to reach and the equipment’s wheel path. Listed lengths range from 72 inches for PioneerWorks to 90 inches for KROAK; Stalwart is 77 inches, and Evcitn is 75 inches. GarveeTech provides a 76-inch-long, 50-inch-wide single surface, whereas the narrow two-track designs are about 9 to 12 inches wide per ramp.
A wide platform can suit buyers who want one continuous surface, while separate tracks fit equipment whose wheels align with them. Longer ramps may be useful when bridging to a raised truck or trailer, but length alone does not confirm a safe incline.
Match the ramp dimensions to the loading height and tire placement before use.
Portability, folding, and construction
Consider how the ramps will be carried and stored, as well as their listed material. GarveeTech’s aluminum surface folds to one-third size, and KROAK’s aluminum ramps fold to 45.8 inches per ramp; KROAK lists a pair weight of 33.2 pounds. Steel options include PioneerWorks at 39.3 pounds and Stalwart’s alloy-steel pair.
Evcitn lists a 36.4-pound pair and stainless steel among its materials. The OTC’s 230-pound listing and built-in wheels point to a different, shop-oriented handling situation.
Buyers who routinely transport ramps may prefer a folding aluminum design, while a fixed workshop setup may favor ramps designed to roll into position. Check the actual dimensions and weight against your storage and handling needs.
Which truck ramps should you choose?
For heavy-duty truck wheels in a shop, choose OTC TR2010 Truck Ramps: its pair is rated for 20 tons, has 10-inch ramps, and includes positioning wheels and a retractable handle. For folding aluminum ramps to load equipment into a pickup or trailer, KROAK Aluminum Ramps pair a 1,800-pound total rating with 90-inch length and compact folded storage. Choose Stalwart Folding Ramps if the listed 2,200-pound combined capacity is the priority for compatible equipment.
Evcitn 75-Inch Ramps offer a 1,500-pound pair rating and non-slip textured surfaces. GarveeTech Tri-Fold Ramp suits buyers who want a broad, single 76-by-50-inch aluminum surface.
For lighter loads within its 1,000-pound pair rating, PioneerWorks Steel Ramps are the final option.
Related Buying Guides
- Best Wheel Rollers For Cars
- Best Lift Ramps For Trucks
- Best Atv Ramps For Trucks
- Best Snowmobile Ramps For Trucks
- Best Steel Ramps For Trucks
Frequently Asked Questions
How do I calculate the safe ramp capacity for a vehicle or piece of equipment?
Check the ramp’s stated capacity and whether it applies to one ramp or the pair, then compare it with the equipment’s loaded weight. Include attachments or cargo, and follow the manufacturer’s loading instructions. Do not assume a pair rating applies to each ramp or that a listed capacity suits every loading setup.
How do I choose ramp length for my truck bed or trailer height?
Choose a length that creates a manageable approach angle at the height you need to reach. Measure the vertical rise from the ground to the truck bed or trailer, then check the ramp maker’s guidance for that rise. Longer ramps can reduce steepness, but available space and secure ramp placement also matter.
What safety checks should I make before driving equipment up loading ramps?
Confirm the ramps are rated for the loaded equipment and are compatible with its tires or tracks. Inspect for damage, place them on firm, level ground, and secure them as directed by the manufacturer. Check that the upper ends are stable, the surface is clear, and the equipment can ascend slowly without turning.
Should I choose a single wide ramp or a pair of ramps?
Choose based on the equipment’s contact points and the ramp’s intended use. A broad single ramp can provide one continuous surface, while a pair places separate tracks beneath tires. In either case, confirm that the surface width and capacity suit the equipment, and follow the product’s setup instructions.
Are heavy-duty truck ramps suitable for loading equipment into a pickup bed?
Not necessarily. The OTC TR2010 pair is described for semi-trucks and tractor-trailers, and the verdict notes that pickup-bed equipment loading calls for a different ramp style. For pickup or trailer equipment loading, consider a folding aluminum option whose stated capacity and length match the load and loading height.
Final Words
Match the ramp to the vehicle and loading task first. For heavy-duty truck wheels in a shop, the OTC TR2010 stands out with its 20-ton pair capacity and positioning features, but it is not the pickup-bed equipment choice. For pickup or trailer loading, compare the folding ramps by stated pair capacity and length; choose the Stalwart for its listed 2,200-pound combined capacity, or a lighter-capacity option when it suits the load.
