Best 3 Point Ripper For Tractor: 10 Options Compared

#1 · Best Overall

1. Titan Single Tine Subsoiler

• Weight: 113 lb

Best for: Category 1 deep soil work.

Why it ranks #1: Attaches directly to a Category 1 three-point hitch without modifications and offers adjustable depth, listed at 21 to 33 inches below the lift pins.

A stated working depth of 21 to 33 inches below the lift pins is the defining capability of Titan Attachments’ single-tine subsoiler. It is intended for deep soil conditioning, drainage, breaking hard ground, and installing wire or water lines, using a direct Category 1 three-point connection.

The Category 1 three-point hitch connection is described as requiring no modifications, bolting, or welding; the listed installation steps are backing up, hooking into the top link bar, and connecting the included hitch pins. That supports a straightforward tractor hookup. Titan also gives the working depth as 21 to 33 inches below the lift pins, connecting the single tine to deep conditioning and line installation. The 8.5-by-1.5-inch shank is identified in the title, while the product weight is listed as 113 pounds.

Skip it if you need a pipe layer integrated into the implement; Titan Attachments’ Category 1 subsoiler with pipe layer accepts polyethylene pipe up to 50 mm.

This Titan suits Category 1 tractor owners conditioning deep soil, improving drainage, or installing lines. Its listed connection is a three-point hitch, and the stated 21-to-33-inch depth is measured below the lift pins.

Listed on Amazon as: Titan Attachments 3 Point Single Tine Subsoiler Fits Cat 1 Tractors, 8.5"x1.5" Shank Ripper Tooth, Adjustable Ripping Depth, Rip Through Sod and Loosen Compact Soil, One-Pass Water Drain System

#2 · Best Pipe Layer

2. Titan Subsoiler with Pipe Layer

• Weight: 150 lb
• Material: Steel

Best for: Category 1 pipe installation.

Why it ranks #2: Designed for a Category 1 three-point hitch and includes a pipe layer that accepts polyethylene pipe up to 50 mm for one-pass installation.

A pipe layer with a 2.75-inch inside diameter makes this Titan Attachments subsoiler a direct fit for jobs combining soil ripping and line placement. It accepts polyethylene pipe up to 50 mm, or 2 inches, and is specified for a Category 1 three-point tractor hitch and laying materials about a foot deep.

The integrated pipe layer lets the implement condition soil and lay material in a single pass, linking trenching and placement rather than treating them as separate steps. Its 2.75-inch inside diameter accommodates polyethylene pipe up to 50 mm, while the tubing’s 2.5-inch opening feeds piping into the layer. Titan specifies direct attachment to a Category 1 three-point hitch and says it lays materials about a foot deep. The stated dimensions and pipe limit are useful checks before selecting tubing or planning installation.

Skip it if you need a ripper without a pipe layer for general trenching; HOWBOW’s adjustable 16-inch shank model lists replaceable teeth instead.

Choose this for Category 1 tractor work where ripping soil and laying polyethylene pipe, hoses, or wires belong in one pass. Confirm the planned pipe stays within the 50 mm limit and account for the approximately one-foot laying depth.

Listed on Amazon as: Titan Attachments 3 Point Single Tine Subsoiler with Pipe Layer, Fits Cat 1 Tractors, Accepts 50mm Poly Pipe, Adjustable Ripping Depth, Rips Through Compact Soil to Lay Pipes, Hoses, and Wires

#3 · Multi-Shank Option

3. Elementool Middle Buster

• Weight: 60.2 lb

Best for: Three-shank bed preparation.

Why it ranks #3: Its three adjustable, replaceable ripper shanks suit buyers seeking multiple working points; the listed implement weighs 60.2 pounds.

Three adjustable, replaceable ripper shanks give Elementool’s middle buster a multi-shank setup for farming and garden-bed preparation. Its 3-point quick-hitch attachment format is intended to connect the implement to a tractor, while the middle-buster form targets furrowing and soil work rather than a receiver-only hookup.

The three adjustable shanks let buyers configure the working points for the listed farming and garden-bed tasks, and replaceability provides a way to change shanks rather than treating them as fixed components. Elementool identifies the implement as a 3-point quick-hitch attachment, making that connection style central to tractor selection and setup. Its listed dimensions are 23.82 inches deep, 22.64 inches wide, and 7.09 inches high, with a listed weight of 60.2 pounds; those figures help plan handling and storage.

Skip it if you need a specified Category 1 fit and a single-tine subsoiler; Titan Attachments’ Category 1 single-tine model lists that hitch compatibility.

This fits tractor owners preparing garden beds or furrows who want three adjustable, replaceable shanks. The supplied details do not identify a hitch category, so verify that the 3-point quick-hitch format suits the tractor before planning setup.

Listed on Amazon as: Middle Buster for Tractors, 3-Point Quick Hitch Attachment with 3 Adjustable & Replaceable Ripper Shanks, Heavy Duty Furrowing Plow for Farming and Garden Bed Preparation

#4 · Trench-and-Lay Bundle

4. HOWBOW Trencher Pipelayer Bundle

• Material: Alloy Steel
• Material Type: Alloy Steel

Best for: One-pass trench-and-lay projects.

Why it ranks #4: Pairs a ripper trencher with a quick-attach pipelayer for cutting trenches and feeding pipe, cable, or wire in one pass.

A ripper trencher paired with a quick-attach pipelayer lets this HOWBOW bundle cut a trench and feed pipe, cable, or wire in one pass. That combined workflow targets solo irrigation, drainage, and utility-line work with an ATV, UTV, or tractor, rather than requiring separate trenching and laying trips.

The bundle’s ripper shank cuts the trench while its pipelayer feeds the line, connecting two steps into the stated single-pass workflow. HOWBOW lists PE pipe, cable, or wire up to 1.25 inches, a useful boundary when choosing material for the job. Replaceable teeth and U-bolts are also named, giving buyers replaceable working parts and included fastening hardware. The listing identifies compatibility with ATV, UTV, and tractor use; the adjustable shank range is 12.5 to 18.5 inches.

Skip it if you need a trench deeper than the stated adjustable shank range; Sulythw’s hitch-mounted ripper lists adjustment up to 19.3 inches.

For a solo operator installing irrigation, drainage, or utility lines, this bundle combines trenching and line feeding. Check the 1.25-inch material limit and 12.5-to-18.5-inch shank range against the planned job.

Listed on Amazon as: Hitch Mounted Ripper Trencher & Pipelayer Bundle – One-Person Trench & Lay, 12.5"-18.5" Adjustable Shank, Fits 3-Point ATV/UTV, Lays PE Pipe, Cable, Wire up to 1.25", w/ Replaceable Teeth & U-Bolts

#5

5. HOWBOW Adjustable Hitch Ripper

• Material: Steel with Alloy Teeth
• Material Type: Steel with Alloy Teeth

Best for: Adjustable-shank receiver users.

Why it ranks #5: Offers a 16-inch adjustable shank and two replaceable alloy teeth; the listing recommends CAT 0 and CAT 1 tractors with 2-inch receiver adapters.

An adjustable 16-inch trenching shank gives this HOWBOW ripper a defined depth-setting feature for trenching and soil work. Its listing pairs a steel body with two replaceable cemented-carbide alloy teeth, while naming ATV, UTV, and tractor use with 2-inch receiver adapters and recommending CAT 0 and CAT 1 tractors.

The adjustable 16-inch shank lets buyers set the implement for their trenching task, while the two replaceable cemented-carbide alloy teeth provide replaceable working points. HOWBOW lists a steel body with powder coating to help resist rust and corrosion, which supports outdoor use across weather conditions as described. Compatibility is stated for most ATVs, UTVs, and tractors with 2-inch receiver adapters, with CAT 0 and CAT 1 tractors specifically recommended. The receiver adapter requirement matters when planning installation.

Skip it if you want to feed pipe as the trench is cut; HOWBOW’s ripper-and-pipelayer bundle lists one-pass trenching and laying.

This suits ATV, UTV, or tractor owners who want an adjustable shank and replaceable alloy teeth for trenching. The listed vehicle connection uses a 2-inch receiver adapter, and CAT 0 or CAT 1 tractors are the recommended tractor fit.

Listed on Amazon as: Hitch Mounted Trencher Fits 3 Point Hitch, Heavy Duty Subsoiler, Hitch Lawn Ripper for ATV/UTV Tractor, Updated Adjustable 16" Trenching Shank Plow, Thicken Trench Digger with 2pcs Replaceable Teeth

#6

6. Sulythw Hitch Mounted Ripper

• Material: Alloy Steel
• Material Type: Alloy Steel

Best for: Adjustable mini-farm trenching.

Why it ranks #6: Provides four adjustment holes across a 12.5-to-19.3-inch shank range and includes two replacement teeth, but uses a 2-inch receiver.

Four shank holes set this Sulythw ripper apart, allowing adjustment in 2-inch increments from 12.5 to 19.3 inches. The listing gives a maximum plow depth of 11 to 13 inches, making that range relevant to buyers setting up for shallow seeding or deeper trenching on a tractor or UTV.

The four-hole adjustment lets operators change the shank position in 2-inch steps, connecting the implement’s range to different mini-farm tasks. Sulythw lists a maximum plow depth of 11 to 13 inches, which helps set expectations separately from the 12.5-to-19.3-inch shank adjustment. Two replacement teeth are included and are described as high-quality steel, giving buyers spare working teeth for replacement. The product is listed for tractors and UTVs and is titled for 2-inch receivers and CAT 0/1 tractors.

Skip it if you need to lay pipe in the trench in the same pass; HOWBOW’s ripper-and-pipelayer bundle is specified for that workflow.

This suits mini-farm users who want adjustable shank positioning for seeding or trenching, with spare teeth included. Its stated maximum plow depth is 11 to 13 inches, a boundary to weigh against deeper trench requirements.

Listed on Amazon as: Hitch Mounted Ripper for 2" Receivers 3 Point Trencher for CAT 0&1 Tractors

#7

7. Kingway Trencher Ripper

• Material: Alloy Steel
• Material Type: Alloy Steel

Best for: Garden and light-duty trenching.

Why it ranks #7: Its alloy-steel ripper is described for farm, garden, and lawn trenching, but the listed components include only the main body.

Kingway’s stated range of jobs—from loosening garden soil to digging trenches for buried lines—makes this mini trencher a practical choice for varied property work. Its alloy-steel construction is presented as addressing bending and deformation in ordinary plow teeth, including work in hard or rocky ground.

The listed alloy-steel material and stated resistance to bending and deformation speak to buyers working soil that can challenge ordinary plow teeth. Kingway describes uses including seedbed loosening, digging underground crops such as potatoes, and trenching for water pipes, power lines, or drainage. Those tasks span gardens, farms, and park lawns. The product is identified as a 3-point-hitch receiver attachment, but the supplied component list names only one main body, so buyers should plan around that listed inclusion.

Skip it if you need pipe feeding during trenching; Titan Attachments’ Category 1 subsoiler with pipe layer is specified to lay pipe in the same pass.

Choose this Kingway for varied garden, lawn, and farm digging, especially when trenching or loosening soil is the goal. Its supplied listing names a main body only, so it is not the documented choice for a pipe-layer bundle.

Listed on Amazon as: 3 Point Trencher Ripper Attachment fit 2" Receivers, Hitch Mounted Ripper for Tractor Lawn Mower ATV UTV, Adjustable Subsoiler Plow with Replacement Plough Blade in Garden Farm Bury Pipes Sow Seeds

#8

8. Tolpassa Tractor Subsoiler Ripper

• Weight: 8.39 kg
• Material: Carbon Steel
• Material Type: Carbon Steel

Best for: Two-tooth quick-hitch soil work.

Why it ranks #8: The listing describes an 18-inch ripper with two teeth and CAT 0/1 compatibility, but connection is through a 2-inch receiver port.

Two teeth distinguish Tolpassa’s adjustable 18-inch ripper from single-tooth options, giving buyers a two-point implement for soil breaking and garden tilling. Its listing specifies a quick-hitch connection for CAT 0 and CAT 1 tractors, ATVs, and UTVs using 2-inch receiver ports.

The adjustable 18-inch configuration and two teeth suit the listed soil-breaking and garden-tilling jobs, while the quick-hitch design is described as allowing installation in minutes. Tolpassa specifies compatibility with CAT 0 and CAT 1 tractors, ATVs, and UTVs, with 2-inch receiver ports measuring 1.97 by 1.97 inches. The high-strength alloy-steel construction and rust-resistant black powder coating are presented as durability and corrosion-resistance features for outdoor use. Check the stated receiver dimensions when planning the hookup.

Skip it if you want pipe placement as you trench; Titan Attachments’ Category 1 subsoiler with pipe layer combines ripping and pipe feeding.

This fits buyers seeking two teeth for soil breaking or garden tilling across the listed CAT 0/1 tractor, ATV, and UTV platforms. The receiver-port dimensions are specific, so measure the intended connection before installation.

Listed on Amazon as: Tractor Subsoiler Ripper, Adjustable 18" 3 Point Hitch Trencher with 2" Receiver, 2 Teeth for Soil Breaking & Garden Tilling, Compatible with CAT 0/1 Tractor, ATV/UTV

#9

9. CAMMOO Hitch Mounted Trencher

• Weight: 18.3 lb
• Material: Carbon Steel
• Material Type: Carbon Steel

Best for: Reinforced receiver hitch users.

Why it ranks #9: A reinforced 2-inch receiver and 20 mm shank suit receiver-based work, but the listing does not establish a direct standard three-point connection.

An alloy reinforcement rod embedded in the 2-inch receiver is the defining feature, aimed at resisting receiver breakage during hitch-mounted work. CAMMOO also specifies a 20 mm shank, described as 11% thicker, and lists compatibility with tractors, ATVs, and UTVs for buyers choosing among those platforms.

The embedded alloy rod and thicker 20 mm shank address two stress points: the receiver and the ripper shank. Carbon-steel construction provides the listed material, while the included bent pin, R pin, handle nuts, and screws supply hitch hardware and assembly pieces. Its 2-inch receiver is specified for standard 2-inch hitches, but the pin-hole center must sit no more than 2.75 inches from the receiver mouth, with at least 1.96 inches of rear depth. Check those dimensions before installation.

Skip it if you need a Category 1 three-point implement rather than a receiver-mounted ripper; Titan Attachments’ single-tine subsoiler fits that hitch style.

A tractor, ATV, or UTV owner with a standard 2-inch receiver may value the reinforced receiver and shank. It is a receiver-mounted option, and the specified pin-hole and rear-depth measurements are important fit boundaries.

Listed on Amazon as: CAMMOO Hitch Mounted Trencher Ripper, 2" Receiver, Black

#10

10. FULUPET Hitch Mounted Ripper

• Weight: 16.2 lb
• Material: Carbon Steel
• Material Type: Carbon Steel

Best for: Reinforced receiver-ripper users.

Why it ranks #10: The reinforced carbon-steel frame and replaceable teeth support trenching, but its listed vehicle fit is ATV and UTV rather than tractor.

FULUPET’s reinforced, monolithic carbon-steel mainframe is the central feature for buyers concerned about bending or shank snapping under heavy loads. The listing pairs that structure with a tight-tolerance shank fit and replaceable teeth for receiver-mounted garden trenching and digging with an ATV or UTV.

The thickened carbon-steel mainframe is described as a solid, monolithic construction intended to withstand heavy loads and reduce bending or shank-snapping risk. FULUPET also highlights a tight-tolerance shank fit, connecting the fit detail to a more secure-feeling assembly. Replaceable teeth support continued use when a working tooth needs changing, while the 2-inch receiver format fits the listed hitch-mounted use. The product is specified for ATVs and UTVs, so buyers planning tractor use should note that the listed vehicle compatibility is narrower.

Skip it if you need a ripper specifically listed for tractor compatibility; Tolpassa’s adjustable 18-inch model names CAT 0/1 tractors as well as ATVs and UTVs.

This is for ATV and UTV owners seeking a reinforced receiver-mounted ripper for garden trenching and digging. Its listed vehicle compatibility does not name tractors, so tractor buyers should choose an option that specifies that platform.

Listed on Amazon as: Hitch Mounted Ripper Trencher for ATV UTV Tractor, 3 Point Subsoiler Plow fits 2" Receiver, Reinforced Middle Buster with Replaceable Teeth for Garden Trenching and Digging