A strong 5-lug trailer hub choice matches your axle rating, bolt pattern, and spindle type, and suits owners replacing hubs on boat, utility, or cargo trailers. Most options here target 3,500-pound axles with a 5-on-4.5-inch pattern and #84 tapered spindles, but one kit is for straight spindles and another uses a 5-on-5-inch pattern. Those differences matter more than a product’s broad fit claims.
Our leading pick, Redants 3500-lb Hub Kit, includes two pre-assembled, greased hubs for 1-1/16- to 1-3/8-inch tapered spindles. The comparison also includes galvanized choices for marine exposure, a 2,000-pound straight-spindle option, and kits with extra seals or dust caps.
Confirm your current hub’s bolt circle, bearings, and spindle before ordering.
Redants 3500-lb Hub Kit is the best overall choice for a common 3,500-pound trailer setup because it provides two pre-assembled, pre-lubricated hubs with a 5-on-4.5-inch pattern. It fits #84 tapered axles from 1-1/16 to 1-3/8 inches, and its bearings and grease seals arrive assembled and lubricated. That combination makes it a clear match for buyers replacing a pair of hubs on a compatible axle.
Verify the spindle type and bearing fit before purchase; it is not a universal hub.
Our Top Picks
Best OverallTwo pre-assembled, greased hubs fit 3,500-pound #84 tapered axles from 1-1/16 to 1-3/8 inches with a 5-on-4.5-inch pattern.
View on Amazon
Best GalvanizediBroPrat Galvanized Idler Hubs
Hot-dip galvanizing is specified for seawater corrosion resistance, and the two 5-on-4.5-inch hubs are pre-assembled and lubricated.
View on Amazon
Extra SparesTwo 3,500-pound 5-on-4.5-inch hubs fit tapered #84 axles and the kit adds two dust caps and four seals.
View on Amazon- Pattern Guide AIUWIZO Idler Hub Kit
- Straight-Spindle Fit Saree 2000-lb Straight Hub
Compare these five-lug trailer hub options
| # | Product | Package Dimensions | Weight | Buy |
|---|---|---|---|---|
| 1 | 1. Redants 3500-lb Hub KitBest Overall | 14.45 x 8.35 x 5.59 in | 17.75 lb | View on Amazon |
| 2 | 2. iBroPrat Galvanized Idler HubsBest Galvanized | 13.3 x 7.48 x 5.83 in | 16.98 lb | View on Amazon |
| 3 |  3. Saree 3500-lb Hub KitBearing-specific tapered axle fit | 14.45 x 8.5 x 5.55 in | 17.73 lb | View on Amazon |
| 4 | 4. GREPSPUD 5×4.5 Hub KitExtra Spares | 13.39 x 7.32 x 5.71 in | 16.74 lb | View on Amazon |
| 5 |  5. SEHNSUCHT Idler Hub KitTapered-spindle hub hardware | 15.59 x 10.67 x 6.73 in | 17.53 lb | View on Amazon |
| 6 |  6. AIUWIZO Idler Hub KitPattern Guide | 14.76 x 8.43 x 5.47 in | 17.78 lb | View on Amazon |
| 7 |  7. Aeagle Galvanized Hub KitHot-galvanized replacement hubs | 15.63 x 10.71 x 6.77 in | 17.13 lb | View on Amazon |
| 8 |  8. Jreixr 3500-lb Hub KitPre-greased tapered-axle hubs | 14.53 x 8.27 x 5.59 in | 17.73 lb | View on Amazon |
| 9 |  9. Saree 2000-lb Straight HubStraight-Spindle Fit | — | 15.42 lb | View on Amazon |
| 10 |  10. GREPSPUD 5×5 Hub KitSpare caps and rubber plugs | 13.46 x 7.44 x 5.12 in | 16.78 lb | View on Amazon |
Detailed Reviews: Best 5 Lug Hub For Trailer
#1 · Best Overall
1. Redants 3500-lb Hub Kit
- Package Dimensions: 14.45 x 8.35 x 5.59 in
- Weight: 17.75 lb
Best for: Pre-greased axle replacement.
Why it ranks #1: Two pre-assembled, greased hubs fit 3,500-pound #84 tapered axles from 1-1/16 to 1-3/8 inches with a 5-on-4.5-inch pattern.
Pre-assembled, grease-lubricated bearings and seals are the practical draw of this Redants two-hub kit, letting an installer begin with those components already in place. It serves a 3,500-pound trailer axle with a 5-on-4.5-inch pattern, for #84 tapered spindles from 1-1/16 to 1-3/8 inches.
The pre-installed bearings and grease seals reduce the number of parts to position during installation, while the supplied grease means the kit arrives lubricated. Its stated #84 tapered-spindle range and 3,500-pound axle rating help narrow fit decisions before work begins. The 5-on-4.5-inch bolt pattern identifies the wheel interface, so buyers can compare it with their existing hub. This is a two-set kit, making it relevant when replacing hubs on both sides of an axle.
- Two hub sets included
- Bearings arrive pre-installed
- Bearings and seals are pre-lubricated
- Fits stated #84 tapered-spindle range
- Tapered spindles only; straight-spindle axles are not listed as compatible.
Skip it if you have a straight spindle; the Saree TrailerHub2000 supports specified 1-inch and 1-1/16-inch straight spindles.
Choose this Redants kit for a two-hub replacement on a 3,500-pound axle when pre-installed, greased components simplify the job. Its 5-on-4.5-inch pattern and tapered-spindle requirement remain essential fit boundaries.
Full product details
| Brand | Redants |
|---|---|
| Item Weight | 17.75 pounds |
| Item model number | TH006 |
| Manufacturer | Redants |
| Part Number | TH006 |
| Model | trailer hub set |
| Package Dimensions | 14.45 x 8.35 x 5.59 inches |
Listed on Amazon as: Redants 2 Sets 3500 LB Trailer Hub Kit, 5 Lug 4.5" Bolt Pattern Trailer Hub, Pre-Assembled & Greased for Easy Installation, Fits 1-1/16" to 1-3/8" Spindles (#84)
View on Amazon#2 · Best Galvanized
2. iBroPrat Galvanized Idler Hubs
- Package Dimensions: 13.3 x 7.48 x 5.83 in
- Weight: 16.98 lb
Best for: Galvanized boat-trailer hubs.
Why it ranks #2: Hot-dip galvanizing is specified for seawater corrosion resistance, and the two 5-on-4.5-inch hubs are pre-assembled and lubricated.
Hot-dip galvanizing is the defining feature of this iBroPrat two-set idler hub kit, with the listing specifying better seawater-corrosion resistance than black spray paint. It fits 3,500-pound axles with a 5-on-4.5-inch pattern and #84 tapered spindles from 1-1/16 to 1-3/8 inches.
The galvanized finish is relevant for buyers considering marine exposure, while pre-installed accessories and pre-lubricated bearings can reduce setup work before fitting the hubs. The specified 3,500-pound capacity, #84 spindle range, and five-on-4.5-inch pattern provide a defined compatibility checklist. The listing also calls for checking the old hub size and confirming L44649 and L68149 bearings, making those comparisons part of a careful replacement workflow.
- Hot-dip galvanized hubs
- Pre-installed accessories
- Bearings pre-lubricated with grease
- Fits stated 3,500-pound #84 tapered axles
- The specified fit is limited to the listed tapered-spindle range.
Skip it if you have a straight spindle; the Saree TrailerHub2000 is listed for 1-inch and 1-1/16-inch straight spindles.
Consider this iBroPrat set for a compatible 3,500-pound tapered axle, particularly where its galvanized finish and pre-lubrication suit the job. Confirm bearing codes, spindle dimensions, and bolt pattern before installation.
Full product details
| Brand | iBroPrat |
|---|---|
| Item Weight | 16.98 pounds |
| Item model number | QB-QC0056-2 |
| Manufacturer | iBroPrat |
| Part Number | QB-QC0056-2 |
| Model | QB-QC0056-2 |
| Package Dimensions | 13.3 x 7.48 x 5.83 inches |
Listed on Amazon as: iBroPrat 2Sets Galvanized Trailer Idler Hub Kits 5 Bolt 4.5 for 3500 lb
View on Amazon#3
3. Saree 3500-lb Hub Kit
- Package Dimensions: 14.45 x 8.5 x 5.55 in
- Weight: 17.73 lb
Best for: Bearing-specific tapered axle fit.
Why it ranks #3: Includes two 5-on-4.5-inch hubs for tapered #84 spindles, with L44649 outer and L68149 inner bearing compatibility stated.
Compatibility with named L44649 outer and L68149 inner bearings gives this Saree two-hub kit a clear fit-checking advantage. It targets 3,500-pound axles with a 5-on-4.5-inch pattern and #84 tapered spindles measuring from 1-1/16 to 1-3/8 inches, not straight spindles.
The listing ties the outer and inner bearing codes to the intended axle, helping buyers compare existing components rather than relying on bolt pattern alone. Its 3,500-pound rating and 5-on-4.5-inch pattern identify the capacity and wheel interface. Compatibility is stated for Dexter, Al-Ko, Lippert, Quality, and other brands, but the bearing and tapered-spindle requirements still govern. Two sets are included, suited to replacing both hubs when those specifications match.
- Two hub sets included
- Names L44649 outer bearing
- Names L68149 inner bearing
- Lists compatibility with several axle brands
- Not compatible with straight spindles.
Skip it if you need straight-spindle hubs; the Saree TrailerHub2000 is specified for 1-inch and 1-1/16-inch straight axles.
This Saree kit suits owners replacing two hubs on a compatible 3,500-pound tapered axle, especially when bearing codes are known. Check those codes, spindle type, and 5-on-4.5-inch pattern before choosing it.
Full product details
| Brand | Saree |
|---|---|
| Item Weight | 17.73 pounds |
| Item model number | TH007 |
| Manufacturer | Saree |
| Part Number | THALL002 |
| Model | 5 Lug Trailer Hub Kit |
| Package Dimensions | 14.45 x 8.5 x 5.55 inches |
Listed on Amazon as: 2 Sets 3500Lbs Axle Trailer Hub Kit 5 Bolt 4.5",5 Lug Trailer Hub Fit 1-1/16" to 1-3/8" Trailer Tapered Spindle,Boat Trailer Hubs 5 Lug,Trailer Wheel Hub Kit(Not fit Straight Spindle)
View on Amazon#4 · Extra Spares
4. GREPSPUD 5×4.5 Hub Kit
- Package Dimensions: 13.39 x 7.32 x 5.71 in
- Weight: 16.74 lb
Best for: Extra seals and dust caps.
Why it ranks #4: Two 3,500-pound 5-on-4.5-inch hubs fit tapered #84 axles and the kit adds two dust caps and four seals.
Two extra dust caps and four extra seals distinguish this GREPSPUD two-hub kit for owners who want spares included with a 5-on-4.5-inch replacement. It fits 3,500-pound #84 EZ-Lube tapered axles from 1-1/16 to 1-3/8 inches and excludes straight spindles.
The supplied extra caps and seals provide replacement pieces beyond the two hub sets, a useful detail when keeping compatible parts available for maintenance. Listed L44649 outer and L68149 inner bearings, along with seal and dust-cap dimensions, make the kit easier to compare with an existing assembly. Its 5-on-4.5-inch pattern, 3,500-pound rating, and tapered-spindle restriction define the application; straight axles are not a match.
- Two 5-on-4.5-inch hub sets included
- Two extra dust caps included
- Four extra seals included
- Lists bearing and seal dimensions
- Not suitable for straight-spindle axles.
Skip it if you have a straight spindle; the Saree TrailerHub2000 specifies straight-spindle compatibility for its listed sizes.
This GREPSPUD set makes sense for a 3,500-pound tapered-axle owner who values extra caps and seals and needs the stated 5-on-4.5-inch pattern. Its straight-spindle exclusion is a firm boundary.
Full product details
| Brand | GREPSPUD |
|---|---|
| Item Weight | 16.74 pounds |
| Item model number | LS-QC0010-2 |
| Manufacturer | GREPSPUD |
| Part Number | LS-QC0010-2 |
| Model | LSQC0010 |
| Package Dimensions | 13.39 x 7.32 x 5.71 inches |
Listed on Amazon as: 5×4.5 Trailer Hub Kits for 3500lb 1-1/16'' to 1-3/8'' Tapered Axle
View on Amazon#5
5. SEHNSUCHT Idler Hub Kit
- Package Dimensions: 15.59 x 10.67 x 6.73 in
- Weight: 17.53 lb
Best for: Tapered-spindle hub hardware.
Why it ranks #5: The two-hub set lists L44649 and L68149 bearing replacements, grease seals, dust covers, and a 5-on-4.5-inch pattern for tapered spindles.
A specified package of bearings, seals, dust covers, and hub nuts makes this SEHNSUCHT two-hub kit a parts-focused replacement option. It fits 3,500-pound axles with #84 tapered spindles from 1-1/16 to 1-3/8 inches and a 5-on-4.5-inch pattern.
The kit lists inner L68149-replacement and outer L44649-replacement bearing dimensions, which gives buyers concrete measurements for comparing existing parts. Two oil seals, two dust covers, and ten 1/2-20UNF hub nuts are also included, consolidating several installation components in one set. Its stated axle capacity and spindle range support a defined application, but the listing expressly excludes straight spindles and a 5-by-4.75-inch pattern.
- Two hubs included
- Lists inner and outer bearing dimensions
- Includes two oil seals and dust covers
- Includes ten 1/2-20UNF hub nuts
- Not compatible with 5-by-4.75-inch patterns or straight spindles.
Skip it if you need a straight-spindle hub; the Saree TrailerHub2000 lists straight-spindle fit for two specified sizes.
This SEHNSUCHT kit suits buyers who want the bearing dimensions and included hardware spelled out for a 3,500-pound tapered axle. Verify its 5-on-4.5-inch pattern; straight spindles are outside its fit.
Full product details
| Brand | SEHNSUCHT |
|---|---|
| Item Weight | 17.53 pounds |
| Manufacturer | SEHNSUCHT |
| Part Number | BRD016 |
| Package Dimensions | 15.59 x 10.67 x 6.73 inches |
#6 · Pattern Guide
6. AIUWIZO Idler Hub Kit
- Package Dimensions: 14.76 x 8.43 x 5.47 in
- Weight: 17.78 lb
Best for: Pattern-measurement guidance.
Why it ranks #6: Fits 3,500-pound #84 tapered spindles and clearly explains measuring a 5-lug pattern by outer edge to opposite-hole center.
A specific measurement method for the five-lug pattern is the useful feature of this AIUWIZO two-set idler hub kit: measure from one hole’s outer edge to the opposite hole’s center. It targets 3,500-pound axles, a 5-on-4.5-inch pattern, and #84 tapered spindles.
The measurement instruction helps avoid a common fit-check error by distinguishing the stated outer-edge-to-center method from center-to-center measuring. A 6.34-inch hub diameter provides another dimension to compare with an existing assembly. The kit is described for utility, boat, and cargo trailers using the specified 3,500-pound axle and tapered spindle range. Since straight spindles are excluded, confirming spindle style is as important as checking the bolt pattern before installation.
- Two hub sets included
- States 6.34-inch hub diameter
- Explains five-lug pattern measurement
- Lists utility, boat, and cargo trailer use
- Tapered spindles only; straight-spindle applications are excluded.
Skip it if you have a straight spindle; the Saree TrailerHub2000 lists compatibility with specified straight-spindle sizes.
Pick this AIUWIZO kit if you want explicit guidance for checking a five-lug pattern and are servicing a compatible tapered axle. Its 3,500-pound rating and 6.34-inch diameter should match your application.
Full product details
| Brand | AIUWIZO |
|---|---|
| Item Weight | 17.78 pounds |
| Item model number | Trailer Axle Kits-001 |
| Manufacturer | AIUWIZO |
| Part Number | Trailer Hub Kits |
| Model | Trailer Axle Kits-001 |
| Package Dimensions | 14.76 x 8.43 x 5.47 inches |
Listed on Amazon as: 2 Sets 3500 lb 5 Lug Boat Trailer Hub, 5 on 4.5" Trailer Idler Hub Kit
View on Amazon#7
7. Aeagle Galvanized Hub Kit
- Package Dimensions: 15.63 x 10.71 x 6.77 in
- Weight: 17.13 lb
Best for: Hot-galvanized replacement hubs.
Why it ranks #7: Includes two hot-galvanized 5-on-4.5-inch idler hubs with L44649 and L68149 bearing fit for 1-1/16- to 1-3/8-inch tapered axles.
Hot-galvanized idler hubs give this Aeagle two-set kit a corrosion-focused feature for compatible trailer use. The listing specifies a 5-on-4.5-inch pattern and 3,500-pound axles with 1-1/16 to 1-3/8-inch tapered spindles, alongside named inner and outer bearing sizes.
The included inner L68149 and outer L44649 bearings, plus grease seals, rubber-plug dust covers, and hub nuts, put several replacement components together in one package. Hot galvanizing is the stated finish, and the idler-hub description identifies the assembly type. Its tapered-spindle and 3,500-pound requirements remain central fit checks; the listed braking-performance statement does not change those dimensional and axle boundaries.
- Two hot-galvanized idler hubs included
- Names L68149 inner bearings
- Names L44649 outer bearings
- Includes seals, dust covers, and hub nuts
- Specified for tapered axles only.
Skip it if you need a straight-spindle hub; the Saree TrailerHub2000 lists fit for specified straight-spindle axles.
Choose the Aeagle set for a 3,500-pound tapered axle when hot-galvanized hubs and bundled bearing hardware suit your replacement task. Confirm the 5-on-4.5-inch pattern and listed bearing sizes before fitting.
Full product details
| Brand | Aeagle |
|---|---|
| Item Weight | 17.13 pounds |
| Manufacturer | AEagle |
| Part Number | AEBRD019-Q2 |
| Package Dimensions | 15.63 x 10.71 x 6.77 inches |
Listed on Amazon as: Aeagle 2 Sets 5 on 4.5" Trailer Hub Kits for 1-1/16" & 1-3/8" Tapered Axle
View on Amazon#8
8. Jreixr 3500-lb Hub Kit
- Package Dimensions: 14.53 x 8.27 x 5.59 in
- Weight: 17.73 lb
Best for: Pre-greased tapered-axle hubs.
Why it ranks #8: Offers two pre-greased 5-on-4.5-inch idler hubs for #84 tapered spindles and specifies a 6.34-inch hub diameter.
Pre-greased hubs and explicit pattern-measurement guidance are the practical points of this Jreixr two-set kit. It targets 3,500-pound idler hubs with a 5-on-4.5-inch pattern and #84 tapered spindles measuring 1-1/16 to 1-3/8 inches, not straight spindles.
The listing recommends verifying the 6.34-inch hub diameter and checking for L44649 and L68149 bearings, giving buyers several concrete dimensions and codes to compare before ordering. Its five-lug measurement instructions specify an outer-edge-to-center method and also cite a 2-5/8-inch adjacent-hole center distance. Those details support fit checking, while the 3,500-pound rating and tapered-spindle-only requirement limit the applications it covers.
- Two hub sets included
- Pre-greased hubs
- States 6.34-inch hub diameter
- Provides five-lug measurement guidance
- Tapered spindles only; straight-spindle axles are excluded.
Skip it if you have a straight spindle; the Saree TrailerHub2000 is specified for 1-inch and 1-1/16-inch straight axles.
This Jreixr kit suits owners replacing hubs on a 3,500-pound tapered axle who want measurement guidance before ordering. Check the hub diameter, bearing codes, and 5-on-4.5-inch pattern against your existing assembly.
Full product details
| Brand | Jreixr |
|---|---|
| Item Weight | 17.73 pounds |
| Item model number | 3500THK-PRE-2 |
| Manufacturer | Jreixr |
| Part Number | 3500THK-PRE-2 |
| Model | 3500lbs 5.*4.5 Trailer Hub Kit |
| Package Dimensions | 14.53 x 8.27 x 5.59 inches |
Listed on Amazon as: 2 Sets 3500lb Trailer Hub Kit, 5 on 4.5 Pre-Greased Boat Trailer Hubs 5 Lug
View on Amazon#9 · Straight-Spindle Fit
9. Saree 2000-lb Straight Hub
- Weight: 15.42 lb
Best for: Straight-spindle boat trailer.
Why it ranks #9: Unlike most options, it fits 1-inch and 1-1/16-inch straight spindles, with bearings and seals supplied for its 2,000-pound rating.
Support for both 1-inch and 1-1/16-inch straight spindles distinguishes this Saree two-hub kit from tapered-axle options. It is rated for axles up to 2,000 pounds and uses a 5-by-4.5-inch bolt pattern, with bearing sizes and seal sizes supplied for those spindle dimensions.
The kit includes L44643 bearings for 1-inch axles and L44649 bearings for 1-1/16-inch axles, giving buyers a stated route to match either listed spindle size. Its two 1.25-inch-ID and two 1.5-inch-ID grease seals add the corresponding seal options to the package. The 2,000-pound capacity and 5-by-4.5-inch pattern define important limits, while the straight-spindle-only fit excludes tapered-axle installations.
- Fits listed 1-inch straight spindles
- Fits listed 1-1/16-inch straight spindles
- Includes L44643 and L44649 bearings
- Includes two listed grease-seal ID sizes
- Rated for axles up to 2,000 pounds, below 3,500-pound kits.
Skip it if you have a tapered spindle; the Redants trailer hub set is specified for #84 tapered axles.
This Saree kit fits buyers servicing a straight-spindle boat axle up to 2,000 pounds, with either listed spindle diameter. Its 5-by-4.5-inch pattern and exclusion of tapered spindles define the fit boundary.
Full product details
| Brand | Saree |
|---|---|
| Item Weight | 15.42 pounds |
| Item model number | TH007 |
| Manufacturer | Saree |
| Part Number | THALL002 |
| Model | TrailerHub2000 |
| Dimensions | 15 x 7 x 5 inches |
Listed on Amazon as: 5 Lug Trailer Hub 2000Lbs, Fits 1"/1-1/16" Straight Spindle, 5×4.5 Boat Axle 2Pk
View on Amazon#10
10. GREPSPUD 5×5 Hub Kit
- Package Dimensions: 13.46 x 7.44 x 5.12 in
- Weight: 16.78 lb
Best for: Spare caps and rubber plugs.
Why it ranks #10: This two-hub kit fits 3,500-pound tapered #84 axles, but its 5-on-5-inch pattern differs from the common 5-on-4.5-inch fit.
Extra dust caps and rubber plugs set this GREPSPUD kit apart for owners who want spare small parts alongside two 5-by-5-inch hubs. It is specified for 3,500-pound trailers with 1-1/16 to 1-3/8-inch #84 tapered axles, including EZ-Lube axles.
The package includes two hub sets plus two extra dust caps and four rubber plugs, so replacement spares are on hand if those pieces need attention later. Its 5-by-5-inch pattern is a distinct wheel-fit detail to check against the existing hub. The stated #84 tapered-axle range and EZ-Lube compatibility identify the intended axle family, while the 3,500-pound rating sets the listed capacity boundary.
- Two 5-by-5-inch hub sets included
- Two extra dust caps included
- Four extra rubber plugs included
- Fits stated #84 EZ-Lube tapered axles
- The 5-by-5-inch pattern will not match a 5-on-4.5-inch wheel pattern.
Skip it if you need a 5-on-4.5-inch pattern; the GREPSPUD LSQC0010 kit has that listed bolt pattern.
Choose this GREPSPUD set for a compatible 3,500-pound tapered axle when a 5-by-5-inch pattern and extra caps and plugs suit your maintenance needs. The bolt pattern is the key fit boundary.
Full product details
| Brand | GREPSPUD |
|---|---|
| Item Weight | 16.78 pounds |
| Item model number | LSQC00282N |
| Manufacturer | GREPSPUD |
| Part Number | LSQC00282N |
| Model | LSQC00282N |
| Package Dimensions | 13.46 x 7.44 x 5.12 inches |
Listed on Amazon as: 5×5'' Trailer Hub Kits for 3500lb 1-1/16'' to 1-3/8'' Tapered Axle
View on AmazonAvoid the wrong five-lug pattern
A five-lug count alone does not establish that a hub will fit your wheel; the bolt-circle measurement must match. Most kits here use a 5-on-4.5-inch pattern, while GREPSPUD 5×5 Hub Kit is explicitly 5-on-5 inches. AIUWIZO Idler Hub Kit describes a measurement method: measure from the outer edge of one lug hole to the center of the hole directly across, rather than measuring center-to-center.
Jreixr 3500-lb Hub Kit also calls for checking the pattern and dimensions before ordering. A pattern mismatch can leave the wheel unable to mount correctly even when the hub otherwise matches the axle.
Check the existing hub or wheel pattern and compare it with the listing’s stated bolt circle. Do not assume a five-hole hub is interchangeable with another five-hole hub, or rely on the product title’s lug count alone.
Tapered and straight spindles are not interchangeable
The spindle type is a critical compatibility check: most products in this roundup fit tapered spindles, but Saree 2000-lb Straight Hub is designed for straight spindles instead. The 3,500-pound kits commonly specify #84 tapered axles measuring 1-1/16 to 1-3/8 inches; several explicitly state that straight spindles are incompatible. Conversely, the Saree straight-spindle kit fits 1-inch and 1-1/16-inch straight spindles and says it does not fit tapered spindles.
A matching lug pattern cannot compensate for the wrong spindle geometry. Before selecting a kit, identify whether the spindle is straight or tapered and check bearing numbers or dimensions against the listing.
If those details are uncertain, compare the old hub’s bearings and seals or consult the axle documentation rather than choosing by the 5-lug description alone.
How to Choose a 5-Lug Trailer Hub
Axle rating and spindle dimensions
Choose a hub whose stated axle capacity and spindle fit match your trailer. Most listings target 3,500-pound axles and tapered #84 spindles from 1-1/16 to 1-3/8 inches, including Redants 3500-lb Hub Kit and Saree 3500-lb Hub Kit. Saree 2000-lb Straight Hub is the distinct option for an axle rated up to 2,000 pounds with 1-inch or 1-1/16-inch straight spindles.
These ratings and spindle types are not interchangeable. Buyers with a common #84 tapered setup should focus on the 3,500-pound group; owners with straight spindles should examine the Saree 2,000-pound option and verify the axle rating before choosing.
Bolt pattern
Match the full bolt pattern, not just the five-hole count. Most products in this comparison use a 5-on-4.5-inch pattern, including Redants 3500-lb Hub Kit and iBroPrat Galvanized Idler Hubs. GREPSPUD 5×5 Hub Kit uses a 5-on-5-inch pattern, making it a different fit despite also having five lug holes.
A buyer replacing a common 5-on-4.5-inch hub should select one of the matching listings; the 5-on-5 kit suits only a trailer and wheel with that pattern. Measure the existing hub or wheel using a method appropriate for a five-lug pattern, then compare the result with the product’s stated pattern before ordering.
Included parts and finish
Compare the supplied components and hub finish against your replacement needs. Redants 3500-lb Hub Kit arrives with bearings and grease seals pre-assembled and lubricated; GREPSPUD 5×4.5 Hub Kit adds two extra dust caps and four seals. iBroPrat Galvanized Idler Hubs specifies hot-dip galvanizing and pre-lubrication, while Aeagle Galvanized Hub Kit also lists hot-galvanized hubs.
Extra seals or caps may suit buyers who want those listed spares included, while a galvanized finish is a relevant differentiator for owners considering corrosion exposure. These features do not override spindle, axle, bearing, or bolt-pattern fit: confirm compatibility first, then use the included parts and finish to distinguish otherwise suitable kits.
Which 5-Lug Trailer Hub Should You Choose?
For a typical 3,500-pound trailer with a 5-on-4.5-inch pattern and #84 tapered spindle, choose Redants 3500-lb Hub Kit: it includes two pre-assembled, lubricated hubs. If the trailer will see marine exposure and you specifically want a galvanized finish, consider iBroPrat Galvanized Idler Hubs, which lists hot-dip galvanizing and pre-lubrication. Choose GREPSPUD 5×4.5 Hub Kit if extra dust caps and seals are useful spares.
For a 1-inch or 1-1/16-inch straight spindle on an axle rated up to 2,000 pounds, Saree 2000-lb Straight Hub is the specialized fit. Avoid GREPSPUD 5×5 Hub Kit unless your wheel pattern is actually 5-on-5 inches.
Before ordering, verify spindle type, bearing fit, axle rating, and bolt pattern.
Related Buying Guides
Frequently Asked Questions
How do I measure a five-lug trailer hub bolt pattern accurately?
Measure from the center of one stud to the far outside edge of the stud two positions away, then compare the result with the listed bolt pattern. For example, a 5-on-4.5-inch pattern measures 4.5 inches by this method. Measure carefully and confirm the wheel’s pattern matches the replacement hub.
How can I tell whether my trailer spindle is straight or tapered?
Compare the spindle diameter at the bearing seats: a straight spindle has the same diameter along its bearing surfaces, while a tapered spindle changes diameter. Clean the spindle and measure the relevant seats with a caliper if needed. Match the spindle type and bearing dimensions to the hub listing before ordering.
When should trailer hubs and bearings be inspected or repacked?
Follow the trailer or hub manufacturer’s maintenance schedule, since the appropriate interval depends on the setup and use. Inspect sooner if you notice unusual noise, excess heat, looseness, or signs of grease leakage. After water exposure, check the hubs and bearings promptly, especially if the trailer is used around marine conditions.
What should I verify before ordering replacement hubs?
Confirm the axle rating, spindle type, bearing fit, and wheel bolt pattern before choosing a hub. Also check whether the listing includes a pair and whether its components arrive assembled or lubricated if those details matter to your replacement. A hub that matches only the bolt pattern may still be incompatible with the spindle.
When might a galvanized hub be the right choice?
A galvanized finish may be worth considering for marine exposure if that finish is a priority; the iBroPrat listing specifies hot-dip galvanizing and pre-lubrication. Still verify its spindle, bearing, axle, and bolt-pattern compatibility. A finish does not make a hub universal or remove the need for suitable maintenance.
Final Words
Start by confirming the spindle type and bearing fit, then match the axle rating and wheel bolt pattern. For a compatible 3,500-pound setup with a 5-on-4.5-inch pattern and #84 tapered spindle, the Redants kit is the clear overall choice because it supplies two assembled, lubricated hubs. Consider the galvanized iBroPrat for marine exposure, or the straight-spindle Saree for its specified fit.
Avoid assuming any option is universal.
