A strong front-of-camper bike rack should attach securely to the trailer’s A-frame or to a compatible raised receiver, with enough capacity for your bikes and room around the tongue jack. The Lippert Components Jack-It Double Bike Carrier System is a direct A-frame option for shoppers who want a purpose-built front mount and up to 80 pounds of capacity. This roundup also compares higher-capacity carriers, adjustable receiver bunks, and a receiver-mounted platform rack.
Fit and installation differ: some products mount over the tongue jack, while others create a 2-inch receiver that needs a separate RV-approved rack. Check your trailer layout and the complete load requirements before choosing, especially if you carry e-bikes or have limited clearance around the jack.
The Lippert Components Jack-It Double Bike Carrier System is the best overall choice for a front-of-camper setup because it mounts over the tongue jack and attaches directly to an A-frame. Its listed capacity is 80 pounds, and its components include foam pads and sway-control cradles. It also frees the rear hitch area for other cargo.
If your bikes are heavier e-bikes, the Let’s Go Aero Jack-E offers a higher 160-pound capacity, but requires 24.5 inches of clearance from the jack shaft to the trailer.
Our Top Picks
Best OverallMounts over the tongue jack and directly to the A-frame, with 80 pounds of capacity, foam pads, and sway-control cradles.
View on Amazon
Highest CapacityThe A-frame system carries two e-bikes up to 80 pounds each, for 160 pounds total, but requires 24.5 inches of jack clearance.
View on Amazon
Wide A-Frame FitCreates a raised 2-inch receiver and adjusts for 14–55-inch A-frame widths; its 100-pound capacity requires a compatible separate rack.
View on AmazonCompare Front-of-Camper Bike Rack Options
| # | Product | Load Capacity | Material | Compatible with Vehicle Type | Buy |
|---|---|---|---|---|---|
| 1 | 1. Lippert Components Jack-ItBest Overall | 80 lb | Alloy Steel | Bicycle | View on Amazon |
| 2 | 2. Let's Go Aero Jack-EHighest Capacity | 160 lb | Alloy Steel | Trailer | View on Amazon |
| 3 | 3. Stromberg Carlson Bike BunkWide A-Frame Fit | — | Metal | — | View on Amazon |
| 4 |  4. Neorexon Trailer Bike BunkWide-range A-frame mounting | 100 lb | Carbon Steel | Trailer | View on Amazon |
| 5 |  5. Let's Go Aero Jack-IT PlusLight-load Jack-It buyers | 40 lb | Alloy Steel | Recreational Vehicle (RV), Trailer, Travel… | View on Amazon |
| 6 |  6. Swagman Traveller XC2Fold-away receiver rack users | 35 lbs per bike | steel | Trailer | View on Amazon |
Detailed Reviews: Best Bike Rack For Front Of Camper
#1 · Best Overall
1. Lippert Components Jack-It
- Load Capacity: 80 lb
- Material: Alloy Steel
- Compatible with Vehicle Type: Bicycle
Best for: A-frame tongue bike haulers.
Why it ranks #1: Mounts over the tongue jack and directly to the A-frame, with 80 pounds of capacity, foam pads, and sway-control cradles.
Mounting over the tongue jack puts two bikes at the front of an A-frame trailer, where the Jack-It’s listed design aims to reduce bounce. That placement also frees the rear hitch and cargo area, making this a practical option when you want bikes up front and cargo space behind.
The system attaches directly to the A-frame and fits most A-frame travel and cargo trailers, so it uses the trailer tongue rather than the rear hitch area. Its 80-pound load capacity supports a pair of bikes within that limit. Foam bumpers and SwayControl curved cradles help stabilize and protect the bikes during travel, while the included BikeWing arms and base provide the carrier components for the setup.
- Mounts over the tongue jack on the A-frame
- Frees the rear hitch and cargo area
- 80-pound listed load capacity
- Foam bumpers and SwayControl cradles help steady bikes
- The 80-pound total capacity limits the combined weight of the bikes.
Skip it if you need to carry bikes whose combined weight exceeds 80 pounds; the Jack-E supports up to 160 pounds.
Choose the Jack-It if your A-frame travel or cargo trailer has room around the tongue jack and you want bikes forward while keeping the rear cargo area open. Its 80-pound capacity sets a clear limit for heavier pairs.
Full product details
| Brand | Lippert Components |
|---|---|
| Color | Black |
| Compatible with Vehicle Type | Bicycle |
| Included Components | BikeWingTM Arms (2), BikeWingTM Y-Base, Foam pads (4), Instruction manual, NoMotionTM pins (2), PowerTowerTM, StingerTM, SwayControlTM curved bike cradles (4), SwayStopTM pins (4), SwayStopTM rubber straps (8), cotter pins (6), flat washers (3), hex bolts, 3/8”-16 x 1-1/2” (3), lock washers (3), snap pins ( |
| Item Dimensions | 30 x 20 x 8 inches |
| Item Weight | 36.4 pounds |
| Dimensions | 30 x 20 x 8 inches |
| Load Capacity | 80 pounds |
| Manufacturer | Lippert Components |
| Part Number | 429756 |
| Manufacturer Warranty Description | 1 Year |
| Material | Alloy Steel |
| Model Number | 429756 |
Listed on Amazon as: Let's Go Aero – 429756 Jack-It Double Bike Carrier System
View on Amazon#2 · Highest Capacity
2. Let's Go Aero Jack-E
- Load Capacity: 160 lb
- Material: Alloy Steel
- Compatible with Vehicle Type: Trailer
Best for: Heavy e-bike A-frame hauling.
Why it ranks #2: The A-frame system carries two e-bikes up to 80 pounds each, for 160 pounds total, but requires 24.5 inches of jack clearance.
A 160-pound total capacity lets the Jack-E carry two e-bikes up to 80 pounds each on a travel-trailer A-frame. Its 55-inch modular trays support tires up to 4.5 inches wide, while folding adjustable V-wings help accommodate bulky or irregular bike shapes, including bikes with racks or fenders.
The Jack-IT tower and modular steel trays create a front-tongue carrying system for two heavy bikes, with the listed 160-pound total capacity covering up to 80 pounds per bike. V-shaped trays support tires up to 4.5 inches wide, and folding V-wings adjust upright support around varied bike geometries. Fit has a firm boundary: the listing requires 24.5 inches of clearance from the jack-shaft center to the trailer.
- Carries two bikes up to 80 pounds each
- 160-pound listed total capacity
- 55-inch trays support tires up to 4.5 inches wide
- Folding V-wings accommodate racks, fenders, and irregular shapes
- Installation requires 24.5 inches of clearance from the jack-shaft center to the trailer.
Skip it if you have less than 24.5 inches of required jack-shaft clearance; the Jack-It 429756 is listed for most A-frame trailers without that stated measurement.
This fits e-bike owners needing a high-capacity A-frame carrier with support for wider tires and irregular frames. Measure the required 24.5-inch clearance before selecting it, and keep each bike at or below 80 pounds.
Full product details
| Brand | Let's Go Aero |
|---|---|
| Compatible with Vehicle Type | Trailer |
| Included Components | 55in Tray Assembly, Jack-IT Tower |
| Load Capacity | 160 pounds |
| Manufacturer | Lets Go Aero |
| Part Number | B02769 |
| Manufacturer Warranty Description | 1-Year Limited Warranty |
| Material | Alloy Steel |
| Model Number | B02769 |
Listed on Amazon as: Jack-E Two eBike Carrier (Model #B02769)
View on Amazon#3 · Wide A-Frame Fit
3. Stromberg Carlson Bike Bunk
- Material: Metal
Best for: Adjustable receiver for RV racks.
Why it ranks #3: Creates a raised 2-inch receiver and adjusts for 14–55-inch A-frame widths; its 100-pound capacity requires a compatible separate rack.
An adjustable A-frame bunk creates a raised 2-inch receiver, letting RV owners use an approved receiver-style bike rack at the trailer tongue. Its 14-to-55-inch mounting-width range accommodates varied A-frame widths, while the listed 100-pound capacity gives the setup room for bikes and rack weight within that limit.
The CC-275 is a mounting system rather than a complete bike carrier: its raised 2-inch receiver accepts an RV-approved receiver bike rack. That separation lets buyers choose a compatible rack for their bikes, while the adjustable 14-to-55-inch A-frame width helps accommodate different trailer tongues. With a 100-pound supported load, the bunk provides a front-of-trailer carrying point, but the rack and bikes must remain within the system’s capacity.
- Creates a raised 2-inch receiver on the A-frame
- Adjusts across a 14-to-55-inch mounting width
- Supports up to 100 pounds
- Accepts RV-approved 2-inch receiver bike racks
- A compatible RV-approved receiver bike rack is required separately for carrying bikes.
Skip it if you want a complete bike carrier in one purchase; the Jack-It 429756 includes bike-carrying arms and cradles.
This suits RV owners who already have, or want to select, an RV-approved 2-inch receiver rack for front-tongue use. Check the A-frame width against its 14-to-55-inch adjustment range and keep the full load within 100 pounds.
Full product details
| Brand | Stromberg Carlson |
|---|---|
| Color | Black |
| Included Components | Item |
| Item Dimensions | 14 x 8 x 41 inches |
| Item Weight | 44 pounds |
| Dimensions | 14 x 8 x 41 inches |
| Manufacturer | Stromberg Carlson Products, Inc. |
| Part Number | CC-275 |
| Manufacturer Warranty Description | Please contact us if you experience any issues within 30 days of receipt. |
| Material | Metal |
| Model Number | CC-275 |
#4
4. Neorexon Trailer Bike Bunk
- Load Capacity: 100 lb
- Material: Carbon Steel
- Compatible with Vehicle Type: Trailer
Best for: Wide-range A-frame mounting.
Why it ranks #4: Its adjustable 12–45-inch A-frame fit and 100-pound capacity suit varied trailer tongues, though the raised receiver needs a separate bike rack.
Its adjustable 12-to-45-inch A-frame fit gives this Neorexon bunk a broad mounting range for campers, trailers, and RVs. The raised 2-inch receiver creates a front-tongue location for a compatible bike rack, while the listed 100-pound capacity supports a substantial combined load within its limit.
The carbon-steel bunk adjusts from 12 to 45 inches wide, helping it match a range of A-frame widths instead of relying on one fixed span. Its raised 2-inch receiver provides the connection point for a compatible receiver-style bike rack, so buyers can use a separate carrier suited to their bikes. The 100-pound capacity sets the combined-load boundary for the receiver setup; the listed package includes assembly instructions.
- Adjusts from 12 to 45 inches wide
- Provides a raised 2-inch receiver
- Listed 100-pound carrying capacity
- Carbon-steel construction
- It provides a receiver mount, not a complete bike-carrying rack.
Skip it if you want the bike-carrying arms included; the Jack-It 429756 lists arms, cradles, and its mounting base among the components.
Pick this bunk if your camper’s A-frame falls within its 12-to-45-inch range and you want a raised receiver for a separate bike rack. Factor that rack into your setup and keep the total supported load at or below 100 pounds.
Full product details
| Brand | Neorexon |
|---|---|
| Color | Black |
| Compatible with Vehicle Type | Trailer |
| Included Components | Assembly Instruction |
| Load Capacity | 100 Pound |
| Manufacturer | Neorexon |
| Part Number | RV Bike Rack |
| Manufacturer Warranty Description | 1 Year |
| Material | Carbon Steel |
| Model Number | RV Bike Rack |
Listed on Amazon as: Upgrade Trailer Tongue Cargo Bike Bunk
View on Amazon#5
5. Let's Go Aero Jack-IT Plus
- Load Capacity: 40 lb
- Material: Alloy Steel
- Compatible with Vehicle Type: Recreational Vehicle (RV), Trailer, Travel…
Best for: Light-load Jack-It buyers.
Why it ranks #5: This direct A-frame Jack-IT carrier fits the front-of-camper use case, but its listed 40-pound capacity is lower than the other direct-mount options.
A 40-pound load capacity is the defining limit of this Jack-IT Plus two-bike carrier, making it relevant to buyers carrying a lighter pair on an RV or travel trailer. Its listed compatibility covers recreational vehicles, trailers, and travel trailers, while an optional straight stinger is included among the components.
The alloy-steel carrier is listed for RVs, trailers, and travel trailers, giving it a stated range of vehicle types for its two-bike setup. Its 40-pound load capacity means the combined bike load needs to stay within that figure, an important constraint when choosing which bikes to bring. The listed package includes the Jack-IT Plus carrier and an optional straight stinger, so buyers can account for that included component when planning installation.
- Two-bike carrier format
- Listed for RVs, trailers, and travel trailers
- Alloy-steel material
- Includes an optional straight stinger
- The 40-pound total load capacity is restrictive for heavier bikes or pairs.
Skip it if you carry two heavier e-bikes; the Jack-E B02769 lists capacity for two bikes up to 80 pounds each.
Consider the Jack-IT Plus if you need a two-bike carrier for an RV or travel trailer and your combined bike weight stays within 40 pounds. That capacity is the key boundary to check before choosing it for your pair.
Full product details
| Brand | Let's Go Aero |
|---|---|
| Color | Black |
| Compatible with Vehicle Type | Recreational Vehicle (RV), Trailer, Travel Trailer |
| Included Components | Jack-IT Plus 2-Bike Carrier, Optional Straight Stinger |
| Item Dimensions | 20 x 48 x 63 inches |
| Item Weight | 37 pounds |
| Dimensions | 20 x 48 x 63 inches |
| Load Capacity | 40 Pounds |
| Manufacturer | Let's Go Aero |
| Part Number | B00338 |
| Manufacturer Warranty Description | 1-Year |
| Material | Alloy Steel |
| Model Number | B00338 |
Listed on Amazon as: Let’s Go Aero Jack-IT® Plus Two Bike Carrier (Model B00338), Black
View on Amazon#6
6. Swagman Traveller XC2
- Load Capacity: 35 lbs per bike
- Material: steel
- Compatible with Vehicle Type: Trailer
Best for: Fold-away receiver rack users.
Why it ranks #6: The RV-approved platform carries two bikes at 35 pounds per bike, but its 2-inch receiver fit does not itself provide a front A-frame mount.
A fold-down upright bar gives the Swagman Traveller XC2 a useful access benefit: when it is not carrying bikes, the bar can fold to allow access to the RV’s rear. The platform carrier holds two bikes, with a stated limit of 35 pounds per bike and an included 2-inch receiver specification.
The XC2 uses adjustable wheel trays and a ratcheting hook system to secure bikes on its platform, with a 35-pound-per-bike limit defining which loads it can carry. Its 2-inch receiver connection suits a compatible receiver location, while the foldable upright bar can move down when you need access to the RV rear. The listing also describes it as RV-approved for various trailer and camper sizes and says assembly takes a few minutes following the instructions.
- Carries two bikes up to 35 pounds each
- Adjustable wheel trays
- Ratcheting hook system
- Fold-down upright bar allows rear access when not in use
- Its 35-pound-per-bike limit rules out heavier individual bikes.
Skip it if you need to carry an e-bike heavier than 35 pounds; the Jack-E B02769 supports bikes up to 80 pounds each.
Choose the Traveller XC2 if your camper has a compatible 2-inch receiver and you value rear access when the rack is folded. Keep each bike within 35 pounds; that per-bike limit is the main fit boundary.
Full product details
| Brand | Swagman |
|---|---|
| Color | Black |
| Compatible with Vehicle Type | Trailer |
| Included Components | bike rack |
| Item Dimensions | 5 x 35 x 11 inches |
| Item Weight | 39 pounds |
| Dimensions | 5 x 35 x 11 inches |
| Load Capacity | 35 lbs per bike |
| Manufacturer | Swagman |
| Part Number | 64663 |
| Manufacturer Warranty Description | Limited Lifetime Warranty |
| Material | steel |
| Model Number | 64663 |
Listed on Amazon as: Swagman Traveller XC2 RV Bike Rack – RV Approved Platform Carrier for 2 Bikes, 35lbs per Bike, Ratcheting Hook System, Foldable Design, Adjustable Wheel Trays, 2" Receiver
View on AmazonCheck the complete front-mount setup, not just the rack
A front-mounted rack can fail to fit even when its advertised trailer compatibility sounds broad, so check the full assembly against your tongue layout. The Let’s Go Aero Jack-E explicitly requires 24.5 inches of clearance measured from the center of the jack shaft to the trailer. The Lippert Components Jack-It mounts over the tongue jack and attaches to the A-frame, but the supplied information does not give a universal clearance measurement.
Receiver-bunk options have a different fit check: the Stromberg Carlson Bike Bunk adjusts across 14–55 inches of A-frame width, while the Neorexon Trailer Bike Bunk adjusts from 12–45 inches. Measure the frame at the intended mounting points and consider nearby equipment before choosing.
Also confirm what the receiver-bunk kit includes; both bunk products create a raised 2-inch receiver, so you need an appropriate rack to carry bikes.
Front location does not guarantee a stable or suitable load
A rack’s position at the front does not remove the need to verify bike weight, load limits, and restraint compatibility. The Lippert Components Jack-It lists an 80-pound capacity and includes foam pads and sway-control cradles, while the Let’s Go Aero Jack-E lists 160 pounds total for two e-bikes up to 80 pounds each. The Let’s Go Aero Jack-IT Plus lists 40 pounds, so it is a poor match for a heavier pair unless your actual load stays within that figure.
Receiver bunks list their own capacities—100 pounds for both the Stromberg Carlson Bike Bunk and Neorexon Trailer Bike Bunk—but those figures describe the bunk, not necessarily the capacity of the separate receiver-mounted rack. Treat the lowest applicable limit in the assembled setup as the governing one, and check bike, rack, and trailer requirements before travel.
How to Choose a Front Camper Bike Rack
Mounting style and A-frame fit
Choose a mounting style that matches your trailer’s tongue and the equipment already installed there. The Lippert Components Jack-It and Let’s Go Aero Jack-IT Plus mount as direct Jack-IT carriers, while the Let’s Go Aero Jack-E attaches to the A-frame and specifies 24.5 inches of jack-shaft clearance. The Stromberg Carlson Bike Bunk creates a raised 2-inch receiver and adjusts from 14–55 inches wide; the Neorexon Trailer Bike Bunk also creates a 2-inch receiver, with a 12–45-inch adjustment range.
Direct carriers suit buyers seeking an integrated front rack. A bunk can suit someone who already has an RV-approved receiver rack, provided its width range matches the A-frame.
Capacity and bike type
Match the rack or bunk capacity to the actual combined weight of your bikes, and check per-bike limits where stated. The Let’s Go Aero Jack-E is listed at 160 pounds and is described as carrying two e-bikes up to 80 pounds each. The Lippert Components Jack-It lists 80 pounds, both receiver bunks list 100 pounds, and the Let’s Go Aero Jack-IT Plus lists 40 pounds.
The Swagman Traveller XC2 specifies 35 pounds per bike. A heavier e-bike pair points toward the Jack-E, subject to its clearance requirement; lighter bikes may suit other options.
For receiver bunks, remember that a separate rack is needed and its own capacity also matters.
Included hardware and carrying arrangement
Look at whether the product is a complete bike carrier or a mounting platform that needs another rack. The Lippert Components Jack-It includes BikeWing arms, foam pads, sway-control cradles, and straps. The Let’s Go Aero Jack-E includes a tray assembly and Jack-IT tower.
By contrast, the Stromberg Carlson Bike Bunk and Neorexon Trailer Bike Bunk provide a raised 2-inch receiver, so buyers must pair them with a suitable rack. The Swagman Traveller XC2 is itself a receiver-mounted platform for two bikes and has adjustable wheel trays and a foldable upright bar.
Choose a direct carrier when you want an integrated arrangement; choose a bunk if you already own a compatible receiver rack.
Which Front Camper Bike Rack Should You Choose?
Choose the Lippert Components Jack-It if you want a direct A-frame mount over the tongue jack, up to 80 pounds of capacity, and included sway-control cradles. For two heavy e-bikes, the Let’s Go Aero Jack-E is the stronger capacity match at 160 pounds total, provided your trailer has its required 24.5 inches of clearance. Pick the Stromberg Carlson Bike Bunk if you need a receiver platform adjustable across a wider 14–55-inch span and already have a compatible rack; choose the Neorexon Trailer Bike Bunk for a narrower 12–45-inch adjustment range.
The Let’s Go Aero Jack-IT Plus is a direct-mount alternative for loads within its 40-pound limit. The Swagman Traveller XC2 is best considered when you already have a suitable 2-inch receiver location, not as a standalone front A-frame solution.
Related Buying Guides
Frequently Asked Questions
How can I confirm that a front-mounted bike rack clears my trailer’s tongue jack and propane equipment?
Measure the available space around the jack and propane equipment, then compare it with the rack’s mounting and clearance requirements before buying. The Jack-E requires 24.5 inches from the jack shaft to the trailer. Also check that bikes and rack components will not obstruct access to equipment or interfere with trailer operation.
Does a tongue-mounted bike rack affect trailer sway, weight distribution, or tongue weight?
Yes. Bikes and rack add load at the trailer tongue, so consider their combined weight when checking your trailer’s limits and weight distribution. The Jack-It includes sway-control cradles, but that feature does not replace proper loading or a check that your loaded trailer remains within its specifications.
How do I secure and protect bikes from road spray and vibration at the front of a camper?
Use the rack’s intended restraints and check that each bike is firmly secured before travel; stop periodically to inspect attachments. The Jack-It includes foam pads and sway-control cradles. Consider suitable bike protection from road spray, and confirm that straps or covers cannot loosen, contact moving parts, or obstruct trailer equipment.
How do I choose between a direct-mount carrier and an adjustable bike bunk?
Choose a direct-mount option if you want a carrier attached to the A-frame over the tongue jack. A bike bunk is a better fit when you need a receiver platform and already have a compatible receiver rack. The Stromberg Carlson adjusts across a 14–55-inch range; the Neorexon model adjusts across 12–45 inches.
Which option suits two heavy e-bikes, and what should I verify first?
The Jack-E is the stronger capacity match for two heavy e-bikes, with a listed total capacity of 160 pounds. Before choosing it, confirm the bikes’ combined weight is within that limit and that the trailer provides its required 24.5 inches of clearance from the jack shaft.
Final Words
For a straightforward front-of-camper installation, choose the Lippert Components Jack-It: it mounts directly to the A-frame over the tongue jack, supports up to 80 pounds, and includes sway-control cradles while leaving the rear hitch available for other cargo. For two heavy e-bikes, consider the Jack-E’s 160-pound capacity only if its 24.5-inch clearance requirement is met. Choose a bike bunk when you need an adjustable receiver platform, or the Traveller XC2 only when a suitable 2-inch receiver is already available.
