Best Bolt On Receiver Hitch For Travel Trailer

#1 · Best Overall

1. TOPTOW RV Bumper Hitch

• Maximum Towing Capacity: 200 lb
• Material: Metal
• Compatible with Vehicle Type: travel trailer RV

Best for: Threaded-bolt bumper installation.

Why it ranks #1: Fits 4- to 4.5-inch continuous steel bumper beams, accepts 2-inch accessory shanks, and lists a 200-pound tongue-weight capacity.

Four fully threaded bolts and nuts give the TOPTOW receiver a bolt-on installation approach for continuous steel bumpers measuring 4–4.5 inches. Its 2-inch receiver opening accepts many matching bike racks and cargo carriers, and the listed 200-pound tongue-weight capacity is for accessories, not RV-level trailer towing.

The continuous-steel-bumper fit specifies both a beam range and a mounting surface, helping owners identify whether this receiver matches their trailer. Four threaded bolts and nuts provide the stated attachment hardware for mounting. A 2×2-inch opening accommodates many accessories with 2-inch shanks, including bike racks and cargo carriers. The 200-pound tongue-weight rating does not make it a trailer hitch for towing, and a 5/8-inch pin or lock is not included.

Skip it if you need the receiver to tow your travel trailer; TOPTOW explicitly excludes RV-level trailer towing.

Choose this TOPTOW model when a continuous 4–4.5-inch steel bumper and a bolt-on installation suit your accessory plan. It supports compatible 2-inch-shank gear, but the hitch pin is separate and trailer towing is outside its stated use.

Listed on Amazon as: TOPTOW RV Bumper Hitch Receiver for 4in to 4.5in Beams, 2in Receiver | Fits for Bike Racks, Cargo Carriers Camper-on

#2 · Best Included Hardware

2. Ohuhu RV Bumper Hitch

• Maximum Towing Capacity: 3500 lb
• Material: Alloy Steel
• Compatible with Vehicle Type: Trailer

Best for: Pin-and-cover accessory setup.

Why it ranks #2: Fits a 4-by-4-inch RV bumper and includes a hitch pin and cover; its coating is described as helping resist rust and corrosion.

A hitch pin and receiver cover come with this Ohuhu adapter, giving owners the listed hardware to secure an accessory and cover the opening when idle. Its 2-inch receiver fits 4×4-inch RV or travel-trailer bumpers, and the steel body has E-coat and black powder-coat finishes.

The included pin is intended to stabilize a mounted accessory, while the cover closes the receiver when it is not in use. Those supplied pieces can make switching between use and storage more straightforward. The 4×4-inch bumper fit defines the listed installation target, and the 2-inch receiver accepts compatible accessory shanks. Ohuhu also describes a dual E-coat and powder-coat finish for rust and corrosion resistance. The listing gives a 3,500-pound maximum towing-capacity specification, but this is presented as an accessory hitch.

Skip it if you need a clearly stated accessory tongue-weight rating; this listing supplies a maximum towing-capacity figure instead.

This Ohuhu fits owners with a 4×4-inch bumper who want an accessory receiver with pin and cover included. Its coated steel and included hardware suit regular accessory use, but the listing lacks a separate tongue-weight figure for load planning.

Listed on Amazon as: Ohuhu RV Bumper Hitch 2" Receiver Adapter with Hitch Pin and Hitch Cover

#3 · Best 4-Inch Fit

3. MaxxHaul 50173 Receiver

• Material: Alloy Steel
• Compatible with Vehicle Type: RV

Best for: Standard 4-inch RV bumpers.

Why it ranks #3: Designed for a 4-inch square RV bumper, with a 2-inch receiver and 200-pound tongue-weight capacity for accessories, not trailer towing.

A 2×2-inch receiver for a 4-inch square RV bumper gives compatible shank-mounted accessories a defined mounting point. MAXXHAUL rates this adapter for 200 pounds of tongue weight and lists bike racks, RV tire carriers, and hitch steps among its uses, while cautioning against trailer towing and cargo carriers.

The 2-inch shank compatibility supports a range of listed hitch accessories, including bike racks and RV tire carriers, so one receiver can serve different accessory needs. Its 4-inch square-bumper fit gives buyers a specific mounting target, and the all-steel construction is described as durable and rust resistant. The 200-pound tongue-weight limit applies to accessory use; the product information warns against RV trailer towing and calls for caution with cargo carriers.

Skip it if you need a receiver for trailer towing or want to use a cargo carrier without the listed caution.

This MAXXHAUL adapter suits an RV owner with a 4-inch square bumper who wants a 2-inch accessory receiver for items such as bike racks or tire carriers. Its stated boundary is important: it is not for trailer towing.

Listed on Amazon as: MaxxHaul 50173 Hitch Receiver 2" x 2" Adapter for 4 inch Square RV Bumpers

#4 · Best Frame-Mount Option

4. Stromberg Carlson CC-300

• Material: Alloy Steel
• Compatible with Vehicle Type: Car, Trailer

Best for: Adjustable frame-mounted RV accessories.

Why it ranks #4: Specifically described for travel trailers and fifth wheels; it creates a 2-inch receiver and can be bolted to the frame as Class I.

The CC-300 creates a 2-inch hitch on travel trailers and fifth wheels, with a choice between bolting it on as Class I or welding it on as Class II. That installation flexibility supports different frame setups, while its stated use is mounting bike racks and cargo carriers rather than towing another trailer.

The 2-inch hitch gives compatible bike racks and cargo carriers a receiver point at the back of a travel trailer or fifth wheel. Choosing a bolted Class I installation or welded Class II installation lets the installer select between two listed attachment methods. Alloy-steel construction forms the 46.9-pound unit, so buyers should account for its weight when handling and fitting it. The product is an accessory hitch; the listing does not provide a load-capacity figure.

Skip it if you need a published load limit before choosing an accessory hitch; the CC-300 listing provides no capacity figure.

The CC-300 suits travel-trailer and fifth-wheel owners seeking a rear 2-inch mount for bike racks or cargo carriers and a choice of bolted or welded installation. Its 46.9-pound weight and unstated capacity are relevant fit considerations.

Listed on Amazon as: Stromberg Carlson CC-300 Adjustable Accessory Hitch – Hitch Receiver for Bike Rack and Carriers, Ideal for Back of Camper, Travel Trailer & RV, Camper Trailer Hitch, Adjustable Truck Hitch, Black

#5

5. Nilight RV Bumper Hitch

• Material: Alloy Steel, Carbon Steel
• Compatible with Vehicle Type: Trailer

Best for: 2-inch-shank rack compatibility.

Why it ranks #5: Offers a 2-inch opening and a 200-pound tongue-weight figure for accessory use, but its listing also gives a 2,000-pound gross trailer-weight figure that needs careful verification.

A 2×2-inch receiver opening makes the Nilight compatible with most bike racks and cargo carriers using 2-inch shanks, while its specified bumper range is 4–4.5 inches. The listing gives a 200-pound tongue-weight limit and a 2,000-pound gross trailer-weight figure, subject to the lowest-rated towing component.

The 4–4.5-inch beam fit identifies the bumper range this bolt-on receiver is meant to meet, while the standard 2-inch opening connects to many matching rack and carrier shanks. Nilight lists alloy and carbon steel construction and supplies the receiver itself. Its specifications state 200 pounds of tongue weight and 2,000 pounds gross trailer weight, with capacity limited by the lowest-rated towing component; verify the intended application against that component limit.

Skip it if you need a capacity beyond the lowest-rated component in your setup; Nilight makes that component the controlling limit.

For a travel-trailer owner with a 4–4.5-inch beam and 2-inch-shank accessories, Nilight provides a standard receiver opening and stated load figures. Keep the lowest-rated component in the calculation; it controls the usable capacity.

Listed on Amazon as: Nilight RV Bumper Hitch Receiver Fits for 4-4.5 inches Beams 2 inch Receiver 200 LBS Capacity Bolt-On Heavy Duty Steel for Camper Bike Racks Cargo Carriers

#6

6. Fioracl Adjustable RV Hitch

• Maximum Towing Capacity: 3500 lb
• Material: Alloy Steel
• Compatible with Vehicle Type: Trailer

Best for: Variable steel-beam widths.

Why it ranks #6: Its adjustable design is intended for different steel-beam widths and heights, and the listing gives a 2-inch opening for common accessories.

An adjustable clamping design lets this Fioracl receiver accommodate steel beams of different widths and heights within its listed 2.5–4-inch range. The 2-inch receiver opening supports many bike racks, cargo carriers, hitch steps, and RV tire racks, while the adjustable lock is intended to limit movement on the beam.

The adjustable function addresses variations in steel-beam width and height, allowing the clamp to tighten around the beam rather than relying on one fixed dimension. That can simplify positioning across the listed 2.5–4-inch range. Its 2×2-inch receiver opening accepts many common accessory shanks, including those used by bike racks, cargo carriers, hitch steps, and tire racks. The listing gives a 3,500-pound maximum towing-capacity specification, but identifies accessories as the receiver's use; check the full setup's limits.

Skip it if you require a clearly stated accessory tongue-weight limit; the supplied listing provides a 3,500-pound maximum towing-capacity figure instead.

This Fioracl suits owners with variable 2.5–4-inch steel beams who value an adjustable clamp and a standard accessory opening. Its listed capacity information does not specify a separate accessory tongue-weight limit, so that distinction matters for loading.

Listed on Amazon as: RV Bumper Hitch Receiver 2 inch Adapter for 2.5 inch to 4 inch Beams, Trailer Hitch Receiver, Fits for Cargo Carrier Bike Racks

#7

7. Ohuhu Bolt-On Adapter

• Maximum Towing Capacity: 200 lb
• Material: Carbon Steel
• Compatible with Vehicle Type: Trailer

Best for: Narrow 4-inch bumper setups.

Why it ranks #7: A 200-pound tongue-weight accessory receiver for 4- to 4.5-inch beams, with a stated requirement for 2-by-2-inch square tubes and one inch of clearance.

A receiver sized for 4–4.5-inch bumpers and 2×2-inch square tubes gives compatible travel trailers a way to mount hitch accessories. Ohuhu specifies a 200-pound tongue-weight capacity and includes a hitch pin and cover, with an important boundary: this receiver is not intended for towing.

The 2×2-inch receiver opening accepts matching shanks, while the specified 4–4.5-inch bumper range narrows the installation target. Before mounting, the listing calls for at least one inch of space between bumper and trailer, a practical clearance check for this bolt-on style. Carbon-steel construction provides the receiver body, and the included pin and cover complete the supplied accessory set. Its 200-pound tongue-weight rating is for accessory use, not trailer towing.

Skip it if you need to tow a trailer; this receiver is explicitly not intended for towing purposes.

For an owner with a 4–4.5-inch bumper and compatible square tube, this Ohuhu receiver supports accessory mounting at the listed 200-pound tongue weight. Check the one-inch clearance requirement; it is not a trailer-towing hitch.

Listed on Amazon as: Ohuhu Bolt-on RV Bumper Hitch Receiver Adapter Fits 4-4.5" Beam Black

#8

8. Fioracl Reinforced Hitch

• Maximum Towing Capacity: 200 lb
• Material: Carbon Steel
• Compatible with Vehicle Type: RV

Best for: Adjustable 3–4-inch beam fit.

Why it ranks #8: Its adjustable bolts and reinforced design are specified for 3- to 4-inch RV beams, but its listing does not detail included installation components.

Adjustable bolts and laser-cut reinforcing ribs distinguish this Fioracl receiver for 3–4-inch RV beams, clamping the receiver to the beam to address wobble during travel. Robot-welded carbon steel supports a stated 200-pound maximum load for cargo carriers and bike racks; the product is not for towing trailers.

The adjustable bolts clamp onto the specified 3–4-inch beams, giving buyers a fit range narrower and different from common 4–4.5-inch bumper receivers. Laser-cut reinforcing ribs add structure around the receiver, while the listing says this arrangement helps eliminate wobble during travel. Robot-welded carbon steel forms the hitch, and its 200-pound maximum load is intended for cargo carriers and bike racks. Treat that limit as accessory capacity, not permission to tow another trailer.

Skip it if you have a 4–4.5-inch bumper or need a hitch for towing; this model is specified for 3–4-inch beams and accessories.

This Fioracl is for owners whose RV beams measure 3–4 inches and who want an accessory mount with adjustable clamping and reinforcing ribs. Its 200-pound limit covers listed racks and carriers, not trailer towing.

Listed on Amazon as: Bolt-On RV Hitch Receiver – 2" Adapter for 3-4" Camper Beams, 200lbs Reinforced Cargo Rack & Bike Mount

#9

9. Zejoot RV Bumper Hitch

• Maximum Towing Capacity: 3500 lb
• Material: Metal
• Compatible with Vehicle Type: RV

Best for: Powder-coated 4×4-inch bumpers.

Why it ranks #9: A bolt-on 2-inch receiver described for a standard 4-by-4-inch bumper, but the supplied specifications provide little capacity or warranty detail.

A 4×4-inch standard bumper fit and no-welding installation define this Zejoot receiver for RV owners seeking a bolt-on accessory mount. Basic hand tools such as a wrench or socket tighten its bolts, while the heavy-duty steel body has a black powder-coated finish intended to help resist outdoor wear.

The listed installation guidance calls for basic hand tools, such as a wrench or socket, to tighten the bolts around a standard 4×4-inch bumper; welding is not required. That makes the setup accessible to owners who can perform a bolted installation. Heavy-duty steel provides the receiver body, and its black powder-coated finish is described as helping resist rust, corrosion, scratches, and outdoor wear. The supplied listing gives no warranty and does not detail accessory compatibility or a tongue-weight rating.

Skip it if you need a stated accessory tongue-weight limit or detailed compatibility list; Zejoot's supplied specifications do not provide either.

Zejoot is a candidate for an RV owner with a standard 4×4-inch bumper who wants a no-weld, hand-tool installation and coated steel. Its available information leaves accessory capacity and compatibility details unspecified.

Listed on Amazon as: Camper RV Bumper Hitch Receiver Adapter, 2 Inch Bolt-On Hitch Receiver

#10

10. Buyers Products 1804055

• Material: Carbon Steel
• Compatible with Vehicle Type: Trailer, Truck

Best for: Pintle-pattern hitch plate operators.

Why it ranks #10: This receiver tube bolts to hitch plates with standard pintle patterns for truck or trailer towing, not to a travel-trailer bumper.

A bolt-on receiver tube that fits standard pintle-hitch hole patterns lets truck and trailer operators switch between pintle-hook and ball-hitch towing without replacing the whole hitch setup. Buyers Products rates this carbon-steel receiver at 20,000 pounds and accepts 2-inch receiver accessories, making its hitch-plate fit central.

The standard pintle-pattern mounting holes let this receiver attach to a compatible hitch plate, so operators can change towing arrangements without swapping the full assembly. It also accepts 2-inch receiver accessories, adding another attachment option to the same plate. Carbon-steel construction and an 8-pound listed weight describe the tube itself, while the 20,000-pound rating is substantial and application-specific. This is a hitch-plate receiver for truck or trailer towing setups, not a bolt-on RV bumper adapter.

Skip it if you need a receiver that clamps directly onto an RV bumper; this model bolts to a hitch plate.

Buyers Products suits operators with a compatible hitch plate who need to switch between pintle-hook and ball-hitch arrangements. Its 20,000-pound rating and receiver format address a different job than a travel-trailer bumper accessory adapter.

Listed on Amazon as: Buyers Products 1804055 2 Inch Bolt-On Receiver Tube for Hitch Plates