Best Dirt Bike Carrier For Hitch: 10 Racks Compared

#1 · Best Overall

1. Mockins 73-Inch Carrier

• Load Capacity: 500 lb
• Material: Steel
• Weight: 51 lb
• dimensions: 73.5 x 31.5 x 5.5 in

Best for: One-person ramp loading.

Why it ranks #1: The 500-pound steel carrier has an integrated 47-inch ramp, a 5.5-inch-wide track, a stabilizer, and four ratchet and loop straps.

The integrated 47-inch ramp on Mockins’ 73-inch carrier is the main draw for riders seeking one-person loading without lifting a bike onto the rack. Its 500-pound capacity and 5.5-inch track width accommodate listed dirt bikes, e-bikes, scooters, and fat-tire or dual-sport wheels.

The 47-inch ramp pairs with the 73-inch carrier to provide a roll-on loading route, while the stated 5.5-inch tire allowance covers fat tires and dual-sport wheels. A 500-pound rating sets the payload boundary for the listed dirt bike, e-bike, and scooter uses. The package includes a hitch stabilizer, storage bag, four loop straps, and four ratchet straps, giving buyers tie-down hardware and a place for accessories. At 51 pounds, the carrier still requires handling for installation and removal.

Skip it if you need a 600-pound rating for a heavier motorcycle; the Black Widow AMC-600-2 supports 600 pounds total across two tracks.

This Mockins suits riders who want a long ramp and supplied straps for loading a compatible bike up to 500 pounds. Its 5.5-inch tire limit and 73-inch carrier length are the key fit boundaries to consider.

Listed on Amazon as: Mockins 500 Lbs. Capacity 73" Motorcycle Hitch Carrier with Loading Ramp

#2 · Best Tilting Design

2. Mockins 83-Inch Tilting Carrier

• Load Capacity: 500 lb
• Material: Steel
• Weight: 75 lb
• dimensions: 83 x 6 x 8 in

Best for: Tilting ramp for wide-tire bikes.

Why it ranks #2: Its 500-pound capacity, tilting ramp, 83-inch frame, and included hitch lock and straps suit riders wanting a longer loading platform.

The Mockins MA-HM-DBC-83-TLTS-96 pairs an 83-inch frame with a tilting ramp, giving riders a long loading platform and a ramp feature intended to ease mounting and dismounting. Its 500-pound capacity and stated fit for tires up to 5.5 inches suit dirt bikes, scooters, and e-bikes.

The 83-by-6-inch steel frame provides a defined platform, while the tilting ramp is intended to make loading and unloading easier. Tire compatibility up to 5.5 inches accommodates listed fat-tire bikes alongside dirt bikes and scooters. The package includes four ratchet straps, four loop straps, a hitch stabilizer, and a hitch lock, supplying tie-down and receiver-stabilizing components with the carrier. At 75 pounds, the carrier itself is a substantial item to handle when fitting or storing it.

Skip it if you need a lighter rack to handle; the Mockins 73-inch carrier weighs 51 pounds and also includes a loading ramp.

Choose this Mockins for a 2-inch receiver setup where the tilting ramp, 5.5-inch tire allowance, and included restraint hardware suit your loading routine. Its 75-pound carrier weight and 500-pound capacity define important handling and load boundaries.

Listed on Amazon as: Mockins 83" Tilting Motorcycle Hitch Carrier with Ramp w/ 500 Lbs. Capacity

#3 · Longest Ramp

3. Black Widow 6-Foot Ramp Carrier

• Load Capacity: 400 lb
• Material: Aluminum
• Weight: 43 lb

Best for: Gentler ramp for single-bike loading.

Why it ranks #3: This dirt-bike-specific aluminum carrier supports 400 pounds and has a six-foot ramp that attaches on either side and stores on the frame.

Black Widow’s extra-long 6-foot ramp creates a gentler loading incline, helping riders roll a single dirt bike onto the carrier with less steep an approach. The aluminum rack fits a 2-inch Class III or IV receiver, carries up to 400 pounds, and accepts tires up to 5.5 inches wide.

The six-foot roll-on ramp attaches to either side and locks onto the carrier frame for storage, combining a gentler loading angle with a self-storing arrangement. Aluminum construction and a 43-pound listed weight make the rack a comparatively light item to handle, while the 400-pound rating defines the payload ceiling. It fits 2-inch Class III or IV receivers and supports wheels up to 5.5 inches wide. The stated use is one dirt bike, e-bike, or fat-tire bike rather than multiple motorcycles.

Skip it if you need to carry two motorcycles on one rack; the Black Widow AMC-600-2 carries two bikes with a 600-pound total rating.

Choose this Black Widow for a single bike when a long ramp, bilateral loading, and on-frame ramp storage suit your routine. Its 400-pound limit and 2-inch Class III or IV receiver requirement set the main boundaries.

Listed on Amazon as: Black Widow Aluminum Dirt Bike Hitch Carrier, 400 lb, Extra-Long 6 Ft Ramp

#4 · Highest Capacity

4. VEVOR 600-Pound Carrier

• Load Capacity: 600 lb
• Material: Q235B Steel
• Weight: 61.7 lb
• dimensions: 77 x 33.1 x 6.1 in

Best for: Long-ramp steel carrier.

Why it ranks #4: The steel carrier supports 600 pounds and includes a 47-inch ramp and stabilizer, providing a high-capacity option for a compatible vehicle.

A 47-inch ramp and a 600-pound rating define this VEVOR steel carrier, offering a loading approach for riders moving heavier motorcycles onto a hitch rack. Its 76-by-7-inch platform provides a stated size reference, while the listed installation-height recommendation is 7.87 to 19.7 inches.

The 47-inch ramp supports the loading workflow, while the 76-by-7-inch platform gives the bike a defined track area. Q235B steel construction and a 600-pound capacity address the rack’s stated support role for motorcycles across a broad weight range. The specified center-hole-to-ground installation height of 7.87 to 19.7 inches gives buyers a concrete vehicle measurement to assess before setup. Its listed dimensions are 77 by 33.1 by 6.1 inches, so storage and handling need room beyond the track length alone.

Skip it if you need a stated tire-width limit or included tie-down straps; the Mockins MA-HM-DBC-83-TLTS-96 specifies 5.5-inch tires and supplies straps.

This VEVOR suits riders prioritizing a 600-pound steel carrier and a 47-inch ramp, provided the vehicle’s receiver height falls within the listed recommendation. Check the 2-inch receiver requirement and allow space for its 77-by-33.1-inch overall dimensions.

Listed on Amazon as: VEVOR Motorcycle Carrier, 600 LBS Steel Motorcycle Carrier Hitch Mount with 47" Longer Ramp, Scooter Dirt Bike Trailer Hauler with Ratchet Straps and Stabilizer, for Car, Truck with 2" Hitch Receiver

#5 · Two-Bike Option

5. Black Widow Double Carrier

• Load Capacity: 600 lb
• Material: Aluminum
• Weight: 69 lb

Best for: Two-bike aluminum hauling.

Why it ranks #5: Its aluminum frame supports up to 600 pounds across two tracks, with a stated 400-pound capacity per track and an included ramp.

Two motorcycle tracks on one hitch carrier are the Black Widow AMC-600-2’s defining advantage, enabling paired-bike transport without a trailer. The aluminum rack fits Class III or IV 2-inch receivers and carries up to 600 pounds total, with a stated 400-pound capacity per track.

The dual-track layout lets riders carry two motorcycles on one carrier, while the 600-pound overall limit and 400-pound-per-track rating clarify how the load is divided. High-strength aluminum keeps the 69-pound carrier lighter than its steel construction might suggest, according to the supplied material and weight specifications. Its roll-on ramp attaches to either side, allowing loading from the more accessible side. An included anti-tilt device helps address carrier movement, and receiver compatibility is specified for Class III or IV 2-inch hitches.

Skip it if you transport only one bike and want a lighter single-track rack; the Black Widow AMC-400 weighs less and carries up to 400 pounds.

The AMC-600-2 suits riders moving two motorcycles together who have a Class III or IV 2-inch receiver. Its per-track and combined weight limits both matter when planning the pair, and the 69-pound carrier requires handling during installation.

Listed on Amazon as: Black Widow Double Motorcycle Bike Hitch Carrier, Loading Ramp, 600 lb Cap

#6

6. Black Widow Aluminum Carrier

• Load Capacity: 400 lb
• Material: Aluminum

Best for: Compact aluminum single-bike hauler.

Why it ranks #6: This aluminum carrier weighs less than many steel options, supports 400 pounds, and includes a ramp, anti-tilt device, and youth-bike spacer.

A side-swapping ramp that stores flat against the carrier makes the Black Widow AMC-400 practical when loading access and compact storage both matter. It carries one motorcycle, e-bike, or fat-tire bike from a 2-inch Class III or IV receiver, with a 400-pound load limit.

The roll-on, roll-off ramp attaches to either side, so you can choose the approach that works with your parking position, then secure it flat for storage. Aluminum construction keeps the carrier’s material distinct from steel alternatives, while the included anti-rattle device helps minimize movement during transport. The 400-pound capacity sets a clear load boundary, and the included youth bike spacer adapter bar adds a stated option for youth-bike setup. Receiver compatibility is limited to 2-inch Class III or IV hitches.

Skip it if you need to carry two motorcycles on one rack; the Black Widow AMC-600-2 is rated for two tracks and 600 pounds total.

For riders hauling one bike who value an aluminum carrier and a ramp that stores against the frame, the AMC-400 is a focused option. Keep its 400-pound limit and 2-inch Class III or IV receiver requirement in mind.

Listed on Amazon as: Black Widow Aluminum Motorcycle Hitch Carrier with Ramp for eBike, 400 lb

#7

7. VEVOR 83-Inch Carrier

• Load Capacity: 500 lb
• Material: Carbon Steel
• Weight: 70.6 lb
• dimensions: 83.46 x 36.22 x 15.35 in

Best for: Corrosion-resistant steel carrier.

Why it ranks #7: The 83.46-inch steel carrier supports 500 pounds and includes an accessory kit, though its listed details do not specify ramp dimensions.

A powder-coated steel frame gives the VEVOR TD-1004-07 a stated resistance to corrosion and wear, a practical detail for outdoor transport and storage. The 83.46-inch carrier supports up to 500 pounds and is listed for motorcycles, scooters, and e-bikes on a 2-inch hitch receiver.

The powder-coated carbon steel construction is described as resisting corrosion and wear, which addresses exposure during outdoor use. Its 500-pound capacity covers the listed motorcycle, scooter, and e-bike applications, while the 83.46-inch length provides a long carrier footprint. An anti-tilt lock device is named in the title, supporting a more stable hitch setup. The listed package includes an accessory kit and user manual, though no ramp is identified among those included components, a notable loading consideration for buyers.

Skip it if you want an included ramp for roll-on loading; the VEVOR TD-1004-03 includes a 47-inch ramp with its 600-pound steel carrier.

Consider this VEVOR if a powder-coated steel rack, anti-tilt lock, and 500-pound rating match your vehicle and bike. Since the listed components do not include a ramp, account for your loading method before choosing this carrier.

Listed on Amazon as: VEVOR 83" Motorcycle Carrier, 500 lbs Capacity, Heavy Duty Steel Hitch Mount Rack with Anti-Tilt Lock Device, Scooter Dirt Bike Trailer Hauler for Car Truck with 2-Inch Hitch Receiver

#8

8. IRILIA Tilting Carrier

• Load Capacity: 500 lb
• Material: Steel
• Weight: 60 lb

Best for: Tilting carrier for standard tires.

Why it ranks #8: Its 500-pound capacity, tilting-ramp design, and 79-inch platform are useful, but the stated maximum tire width is 4.3 inches.

A tilting ramp gives the IRILIA carrier a loading feature aimed at making bike mounting and dismounting easier, while its 79-by-6-inch platform accommodates tires up to 4.3 inches wide. The steel rack is rated for 500 pounds and fits standard 2-inch receivers.

The tilting ramp is intended to simplify loading and unloading, and the 79-inch platform provides room for the listed motorcycle, dirt bike, scooter, and e-bike applications. Its 4.3-inch tire-width limit makes the fit boundary explicit, particularly for buyers comparing fat-tire options. Steel construction and a 500-pound capacity define the carrier’s material and payload limits. The listed compatibility is with standard 2-inch hitch receivers, while the package lists the carrier itself as the included component.

Skip it if you need space for tires wider than 4.3 inches; the Mockins MA-HM-DBC-83-TLTS-96 accommodates tires up to 5.5 inches.

The IRILIA fits riders seeking a 500-pound steel carrier with a tilting ramp for bikes within its 4.3-inch tire limit. Confirm that the standard 2-inch receiver and platform dimensions align with your vehicle and bike.

Listed on Amazon as: Tilting Motorcycle Hitch Carrier with Ramp

#9

9. ECOTRIC 500-Pound Carrier

• Load Capacity: 500 lb
• Material: Steel
• dimensions: 75.91 x 32.24 x 9.06 in

Best for: Broad receiver-class compatibility.

Why it ranks #9: The steel carrier supports 500 pounds, accepts 2-inch receivers across several listed hitch classes, and allows loading from either side.

Compatibility with 2-inch square Class II, III, IV, or V receivers is the ECOTRIC carrier’s clearest distinguishing feature, letting more hitch classes enter the stated fit range. Its steel frame supports up to 500 pounds, and the ramp allows bikes to be loaded from either side.

The four listed receiver classes make this carrier relevant to owners whose 2-inch hitch is Class II, III, IV, or V. Its steel frame is described as high-strength and resistant to flaking, scratching, fading, and wear, supporting use in hauling conditions. The ramp and bilateral loading options let you choose an approach based on access around the vehicle. At 500 pounds maximum capacity, the load still needs to remain within the stated limit; mounting hardware and instructions are included.

Skip it if you need a 600-pound capacity or a specified long ramp; the VEVOR TD-1004-03 is rated for 600 pounds and includes a 47-inch ramp.

The ECOTRIC is a fit for riders whose 2-inch receiver falls within its unusually broad listed class range and who want either-side ramp access. Keep the 500-pound ceiling in view when choosing a bike and securing the load.

Listed on Amazon as: ECOTRIC 500LB Hitch Mount Motorcycle Carrier Transportation Racks Hitch

#10

10. Goplus 600-Pound Carrier

• Load Capacity: 600 lb
• Material: Steel
• Weight: 98 lb

Best for: Wide-tire 600-pound hauling.

Why it ranks #10: Although its steel frame supports 600 pounds and tires up to 7.5 inches wide, the listed details provide fewer restraint and fit specifics.

A stated tire fit up to 7.5 inches wide sets the Goplus carrier apart for riders with unusually broad tires, while its 600-pound capacity addresses heavier loads. The steel hitch rack includes a loading ramp and two straps, and the listing recommends keeping speed at or below 55 mph.

The 7.5-inch tire-width allowance gives buyers a specific fit figure for wide-tire motorcycles, and the 600-pound rating establishes its maximum stated payload. Steel construction is described as strong and tough, with the product information also claiming resistance to rust in rain. A loading ramp supports roll-on access, while two included straps provide basic restraint components. The listing recommends not exceeding 55 mph when carrying a motorcycle, making its stated operating guidance an important part of trip planning.

Skip it if you need a higher stated speed recommendation for loaded travel; the product information for this carrier sets a 55 mph recommendation.

The Goplus is for riders whose tire width or payload needs suit its 7.5-inch allowance and 600-pound rating. Its stated 55 mph guidance is a meaningful operating boundary to factor into hauling plans.

Listed on Amazon as: Goplus Motorcycle Hitch Carrier, 600LBS Motorcycle Carrier Hitch Mount with 2 Straps, Loading Ramp, Dirt Bike Trailer, Heavy Duty Motor Cycle Rack, Fit Up to 7.5” Wide Tire