Best Electric Tilt For Outboard Motor: Compare 10 Options

#1 · Best Overall

1. Winibo QX90 Tilt Unit

• Weight: 32 lb
• Material Type: Aluminum-Alloy, Stainless Steel

Best for: Up-to-90-HP jack-plate shoppers.

Why it ranks #1: This complete electric jack-plate-style unit is specified for up to 90HP and lists a 330-pound load capacity, aluminum-alloy and stainless-steel materials.

A 330-pound load capacity is the clearest differentiator of Winibo’s electric power tilt-trim jack plate, providing a stated capacity figure for buyers comparing transom-lift options. Its listing specifies compatibility with boats and outboard motors up to 90 HP, making horsepower and load limits central to the fit decision.

The electric power tilt-trim jack plate combines aluminum-alloy and stainless-steel materials, giving buyers the listed material mix for evaluating a marine installation. Its 330-pound load capacity offers a concrete limit to check against the intended setup, while the stated fit is for boats and motors up to 90 HP. At 32 pounds and 18.5 by 16.9 by 10.2 inches, it also calls for planning around handling and available mounting space before installation.

Skip it if you need a trim motor replacement for a specific Yamaha model; DB Electrical TRM0060 lists Yamaha 40–50 HP applications.

For boat owners considering an electric jack plate with a stated 330-pound capacity and an outboard up to 90 HP, Winibo supplies useful size and material details. Check the load limit and mounting space against your installation.

Listed on Amazon as: Power Tilt and Trim Unit for Outboard Motor Up to 90HP (Gray)

#2 · Broad Brand Fit

2. RisWhiteMeteors 90HP Unit

• Operation Mode: Electric

Best for: Up-to-90-HP push-button lift buyers.

Why it ranks #2: The electric hydraulic unit is listed for outboards up to 90HP and names Yamaha, Honda, Mercury, Suzuki, and other brands; IP68 waterproofing is stated in its title.

An IP68 waterproof rating and included push-button switch define this electric hydraulic lift unit, giving boat owners a stated water-protection rating and a direct way to raise or lower a motor. The listing specifies outboards up to 90 HP and multiple engine brands.

The included switch can be mounted near the helm or on a tiller handle, putting raise-and-lower control within reach in either listed location. IP68 waterproofing is specified in the title, while compatibility is stated for outboards up to 90 HP and names Yamaha, Honda, Evinrude, Mercury, Suzuki, OMC, Mariner, Johnson, Tohatsu, Nissan, and Mercruiser. Professional installation is recommended for people unfamiliar with hydraulic systems or marine engine rigging.

Skip it if you need a documented 330-pound load capacity; Winibo QX90 states that limit for its jack plate.

For owners of listed outboards up to 90 HP who want accessible push-button control, this unit pairs a stated IP68 rating with flexible switch placement. Consider the professional-installation recommendation if hydraulic systems or marine rigging are unfamiliar.

Listed on Amazon as: Power Tilt Trim Unit for Outboard Motor up to 90HP, Electric Hydraulic Lift Jack Plate, Marine Transom Actuator for Boats, IP68 Waterproof, Black

#3 · Wiring Kit Included

3. Bzcovac PT-35 Unit

• Weight: 19.5 lb
• Material Type: Aluminum

Best for: Small-outboard shallow-water users.

Why it ranks #3: This complete PT-35 tilt-and-trim unit is intended for up to 35HP and includes a wiring kit; its 5.5-inch setback is specified for stability.

A 51⁄2-inch setback is the defining feature of Bzcovac’s PT-35 unit, giving compatible boats a set-back mounting position that the listing associates with stability and improved propeller bite at a higher setting. Its stated ceiling of 35 HP makes this a targeted option for smaller outboards.

The PT-35 combines electric hydraulic tilt and trim with switch activation, so raising the motor is described as a simple way to protect the prop from shallow water or debris and reduce manual lifting strain. Its 51⁄2-inch setback is linked in the listing to improved stability and propeller bite at a higher prop setting. The package includes a wiring kit alongside the aluminum unit, while the 35 HP limit narrows its fit to smaller engines.

Skip it if you run an outboard above 35 HP; Misakomo A3608 lists Yamaha applications through 300 HP.

For owners of outboards up to 35 HP who want powered raising and a 51⁄2-inch setback, the PT-35 combines those features with a supplied wiring kit. Keep its horsepower ceiling and mounting configuration in view when checking fit.

Listed on Amazon as: 3002.1017 52100 for CMC PT-35 Tilt and Trim up to 35 HP – Outboard Motor Electric Hydraulic Power Trim & Tilt Unit

#4 · Mercury-Specific Unit

4. Minke Marine Mercury Unit

Best for: Mercury 30–60 HP assembly replacements.

Why it ranks #4: This complete electric hydraulic unit lists Mercury 4-stroke 30–60HP and 2-stroke 55–60HP applications, with several replacement part references.

This electrically actuated hydraulic tilt-and-trim unit lists Mercury 4-stroke 30 HP, 35–60 HP, and 2-stroke 55–60 HP applications, making engine type and horsepower key fit checks. Its replacement-reference list gives repair buyers several identifiers to compare against the existing assembly.

The electric hydraulic assembly is intended for maintenance, repair, or replacement of existing units on the listed Mercury applications. Its fitment spans specified 4-stroke and 2-stroke ranges, and the supplied references include 855654T4, 893517T01, 855654T08, 855654T09, and 8M0055011. Additional examples name Mercury 35 HP Jet and 40, 50, and 60 HP EFI or Sea Pro models, helping narrow the match beyond a general horsepower range.

Skip it if you need a Yamaha motor replacement; DB Electrical 430-22118 lists Yamaha F75LA and F90JA applications.

For Mercury owners replacing an assembly on a listed 30–60 HP application, this unit provides electric hydraulic operation and several cross-reference numbers. Confirm whether the engine is 2-stroke or 4-stroke and match its exact horsepower and model.

Listed on Amazon as: Electric Hydraulic Tilt and Trim Unit for Mercury 30HP-60HP Outboard Motors, Replacement for 855654T4 893517T01 8M0055011 F6001A

#5

5. Misakomo A3608 Motor

• Weight: 4.6 lb
• Operation Mode: Electric

Best for: Yamaha mid-to-high horsepower replacement.

Why it ranks #5: This replacement motor lists Yamaha 200–300HP applications and multiple Yamaha and Mercury OE references, but it is a motor rather than a complete tilt unit.

The listed Yamaha coverage reaches 300 HP, giving owners of several 200–300 HP models a replacement option for electric engine-angle adjustment. Misakomo also lists Mercury and aftermarket reference numbers, which can help identify the motor when matching an existing part rather than shopping by engine model alone.

Electric operation supports changing engine angle, while the listed function also includes raising the engine during trailer loading to help prevent damage. The fitment description names Yamaha 200, 225, 250, and 300 HP applications, including F, LF, LZ, and Z variants, so buyers can compare their exact model against the list. Mercury 888645T1 and 888645T02 and several aftermarket references provide additional identification routes; the listing does not include installation components.

Skip it if you need a complete jack-plate unit rather than this replacement motor; Winibo QX90 is listed as a tilt-trim jack plate.

For Yamaha owners replacing a tilt-trim motor on a listed 200–300 HP application, this offers broad reference-number coverage and trailer-loading lift functionality. Match the engine model and existing part number carefully; it is a motor, not a full assembly.

Listed on Amazon as: 69J-43880-01-00 69J-43880-00-00 Power Tilt Trim Motor for Yamaha 250HP

#6

6. Misakomo A3607 Motor

• Weight: 3 lb
• Operation Mode: Electric

Best for: Yamaha 115–200 HP motor replacements.

Why it ranks #6: This electric replacement motor lists Yamaha applications including 115HP, 150HP, and 200HP, plus several Yamaha OE references; verify the full fitment.

Misakomo’s A3607 lists Yamaha applications spanning 115 to 200 HP, giving owners of several outboards a replacement motor option for powered engine-angle adjustment. The stated function also raises the engine for trailer loading, while multiple Yamaha reference numbers support comparison with an existing motor.

Electric operation allows the engine to be raised or lowered to an angle, which the listing associates with water performance and fuel economy; it also specifies lifting for trailer loading to help avoid damage. Fitment references include Yamaha 64E, 67H, and 68V series numbers, with listed applications including 115, 150, and 200 HP. Mercury and Sierra references are also mentioned, but buyers should use the exact engine and part-number details to verify the match.

Skip it if you need a full unit for an outboard up to 35 HP; Bzcovac PT-35 is a complete tilt-and-trim unit.

For Yamaha owners replacing a tilt-trim motor on a listed 115, 150, or 200 HP application, A3607 offers several reference numbers and trailer-lift functionality. Match the existing part carefully; this listing is for a motor, not a complete unit.

Listed on Amazon as: 68V-43880-00 Outboard Motor Power Tilt Trim Fit for Yamaha 115 150 200HP

#7

7. Bonbo 430-22011 Motor

• Weight: 1.5 kg
• Operation Mode: Automatic
• Material Type: Aluminum

Best for: Mercury 135–225 HP motor repairs.

Why it ranks #7: This 12-volt replacement motor is listed for Mercury Marine 135–225HP models and references several replacement numbers, including 828708 and 8M0031551.

A 12-volt specification paired with Mercury Marine coverage from 135 to 225 HP gives Bonbo’s 430-22011 a defined replacement role. Its listed OEM references help buyers compare the motor against a removed part, while aluminum construction and a stated inflatable-boat use add further context for the application.

This is a tilt-trim motor rather than a complete assembly, with 12-volt operation and aluminum material specified. The title gives Mercury Marine 135–225 HP coverage for 1995 and later, while the description names all-model coverage in that horsepower range and replacement numbers including 828708 and 8M0031551. Buyers can use those references when checking an existing motor; the product is also listed for inflatable boats, but the engine fit remains the primary check.

Skip it if you need a complete unit for a 30–60 HP Mercury; Minke marine 8M0055011 lists that horsepower range.

For Mercury owners matching a 135–225 HP application, Bonbo’s 12-volt motor offers aluminum construction and several reference numbers for comparison. Check the existing part and model-year fit; buyers seeking a full assembly should look elsewhere.

Listed on Amazon as: 430-22011 Outboard Tilt Trim Motor 12V for Mercury Marine 135-225HP 1995+

#8

8. DB Electrical 430-22118 Motor

• Weight: 3.3 lb
• Operation Mode: Electric
• Material Type: Metal

Best for: Yamaha F75 and F90 motor repairs.

Why it ranks #8: This 12-volt replacement motor lists Yamaha F75LA and F75TLR applications and OE numbers 6D8-43880-00-00 and 6D8-43880-01-00.

DB Electrical’s listed Yamaha F75LA, F75TLR, and F90JA coverage makes this 12-volt tilt-trim motor a focused choice for owners matching those outboards. The listing also recommends it for salt-water use, a relevant detail for buyers maintaining a motor in marine conditions.

The 12-volt electric motor is identified as a tilt-and-trim replacement, while the listed Yamaha 6D8-43880 references and aftermarket numbers help connect it to an existing part. Model coverage includes F75LA and F75TLR, with F90JA named in the title; the description supplies years for the F75 variants. Its metal construction and salt-water recommended use are additional listed details to consider when planning a replacement, though exact application matching remains essential.

Skip it if you need a complete trim unit for a smaller Mercury outboard; Minke marine 8M0055011 lists 30–60 HP applications.

For owners matching a Yamaha F75LA or F75TLR replacement, DB Electrical supplies voltage, material, and reference-number details, plus a salt-water recommendation. Check the listed model-year coverage and existing part number, especially for F90JA fitment.

Listed on Amazon as: DB Electrical Tilt/Trim Motor for Yamaha Outboard Motors F75LA F75TLR F90JA

#9

9. RisWhiteMeteors Mercury Motor

• Operation Mode: Electric

Best for: Mercury and Mariner 2014 owners.

Why it ranks #9: This electric replacement assembly lists Mercury and Mariner 75–115HP applications, with verified Mariner 75, 80, 100, and 115HP examples from 2014.

Explicit 2014 Mercury and Mariner applications from 75 to 115 HP distinguish this electric trim-and-tilt assembly, giving owners named engine models to use for a replacement match. Its listed uses include launching, trimming, and beaching, making it relevant to routine boat positioning as well as engine replacement.

The electric power trim-and-tilt assembly is listed for launching, trimming, and beaching, connecting powered engine positioning to several common boat-handling tasks. Fitment details identify 2014 Mariner 75, 80, 100, and 115 HP models, providing a specific application check rather than a broad horsepower-only claim. The product title also names Mercury and Mariner 75–115 HP, but the verified model-year examples supplied are Mariner 2014 applications; compare the replacement references with the existing assembly.

Skip it if you need a listed Mercury 30–60 HP assembly; Minke marine 8M0055011 names those applications.

For Mariner owners checking a 2014 75, 80, 100, or 115 HP application, this assembly is listed for electric launching, trimming, and beaching support. Verify the exact engine and replacement reference, since supplied model-year examples are specific.

Listed on Amazon as: Outboard Power Trim & Tilt Motor Assembly Replacement for Mercury Mariner 75-115HP | Replaces OEM 818903A1 830250A1 8M0090335 898447T01 | Hydraulic Boat Lift Engine Parts

#10

10. DB Electrical TRM0060 Motor

• Weight: 2.8 lb
• Material Type: Metal

Best for: Yamaha 40–50 HP motor replacement.

Why it ranks #10: This 12-volt motor is a narrow replacement fit for Yamaha 40–50HP outboards from 1995–2001, rather than a complete tilt-and-trim unit.

A narrowly specified 12-volt motor for Yamaha 40–50 HP outboards from 1995–2001 makes DB Electrical’s TRM0060 a focused replacement choice. Its listed shaft dimensions and 4 mm by 8 mm drive tang give buyers concrete details to compare with the motor being removed before beginning a repair.

The 12-volt specification and reverse rotation (RE) identify key electrical and rotational characteristics for a replacement check. DB Electrical also lists a 2.504-inch outside diameter, 0.311-inch shaft diameter, 4.74-inch length, and 4 mm by 8 mm drive tang, helping owners compare physical interfaces. Coverage is specifically stated for Yamaha 40–50 HP outboards from 1995–2001, with Yamaha 62X-43880 and several aftermarket numbers listed for cross-referencing.

Skip it if you have a Yamaha F75LA or F90JA; DB Electrical 430-22118 lists those model families.

For a repair involving a Yamaha 40–50 HP outboard from 1995–2001, this motor’s dimensions and replacement references support a precise part comparison. Its application range is specific, so check the year, engine, and drive interface before ordering.

Listed on Amazon as: DB Electrical Tilt/Trim Motor for Yamaha 40HP 50HP 1995-2001