Best Foot Switch For Trolling Motor

#1 · Best Overall

1. Haoguo Foot Control Switch

• Material: Stainless Steel
• Compatible Devices: 12V-24V manual trolling motors
• Material Type: Stainless Steel

Best for: Hands-free manual-motor control.

Why it ranks #1: Its 12V–24V, 50A rating, IP65 protection, stainless-steel contacts, anti-stick design, and included screws make it a well-specified manual-motor option.

A 15-degree pedal angle paired with an anti-slip surface gives the Haoguo a concrete ergonomic edge, letting anglers start and stop a compatible manual trolling motor by foot. Its 12–24V compatibility and 50A rating make it relevant to a broad range of boat setups while keeping hands available for fishing.

The internal anti-stick design is intended to prevent jamming, while the non-slip pedal helps maintain footing during presses. Stainless-steel contacts and IP65 waterproofing address exposure in a marine setting, and the 12–24V range supports compatible manual trolling motors. For deck installation, the switch uses pre-drilled holes and included screws; its compact 3 x 2.3 x 2-inch dimensions also take up little deck space. It is a start/stop control, not a continuous-on lever.

Skip it if you need a continuous-on lever or a switch for an electric-steer motor; this is specified for manual trolling motors and start/stop operation.

Choose the Haoguo if you want a compact, foot-operated start/stop switch for a 12–24V manual trolling motor and value its angled, non-slip pedal. Check that a start/stop control suits your operating routine.

Listed on Amazon as: Haoguo Trolling Motor Foot Control Switch, 12V-24V 50A DC, IP65 Waterproof, Anti-Stick, Non-Slip Marine-Grade Corrosion-Resistant Pedal for Manual Trolling Motors

#2 · Best Continuous Control

2. Five Oceans FO4601 Switch

• Material: High-Impact ABS Plastic
• Material Type: High-Impact ABS Plastic

Best for: Continuous-control anglers.

Why it ranks #2: This 12–24V, 50A switch has IP65 protection, an on-lever for continuous control, pre-wiring, and four stainless-steel screws.

An on-lever continuous-control system distinguishes the Five Oceans FO4601, letting anglers operate a manually operated trolling motor hands-free without relying only on momentary pedal presses. It is rated to 50A DC and lists 12–24V compatibility, making those specifications useful checkpoints when matching the switch to a boat motor.

The continuous-control lever can suit anglers who want the motor to remain on without repeatedly pressing the pedal, while hands-free operation leaves attention for fishing. Its 50A DC rating and stated 12–24V range define the listed electrical capacity and voltage compatibility. The product includes a pre-wired switch and four stainless-steel screws, which can simplify installation compared with sourcing those items separately. Its high-impact ABS plastic construction and IP65 rating are listed for freshwater and saltwater use.

Skip it if you need an unambiguous voltage specification before purchase; the listing gives 12V in specifications and 12–24V in its title.

Choose the FO4601 if continuous lever control and included pre-wiring and screws suit your boat installation. Its title states 12–24V compatibility, while the specifications list 12V, so resolve that discrepancy for your motor.

Listed on Amazon as: Five Oceans Trolling Motor Foot Switch with On Lever Continuous Control, Rated to 50 Amps DC, 12-24-Volts, Black Polycarbonate, Waterproof IP65 – FO4601

#3 · Best Tilted Pedal

3. Seachoice 28101 Switch

• Material: ABS Plastic
• Compatible Devices: Manually operated trolling motors (up to 50…
• Material Type: ABS Plastic

Best for: Continuous-on lever operation.

Why it ranks #3: It is rated up to 50A DC and specifies a 15-degree tilt and flip lever for continuous on-mode with manually operated trolling motors.

A flip lever for continuous-on operation is the defining feature of the Seachoice foot switch, giving anglers a way to keep a manually operated trolling motor running without holding the pedal down. Its 15-degree tilt supports foot access, while the 50A DC rating specifies its current capacity.

The foot control lets you switch the motor on without reaching for its head, keeping your hands available for fishing or steering. Its tilted pedal angle is specified for ease of operation, and the flip lever offers a continuous-on mode for times when repeated foot presses are inconvenient. The switch is listed for manually operated trolling motors up to 50 amps DC and has a 12V operating-voltage specification, so check those requirements against your motor.

Skip it if you need a stated 24V option; this listing specifies 12V, while the Haoguo ZL-084 lists 12–24V compatibility.

The Seachoice suits anglers with a manually operated trolling motor who want foot activation and the option to leave the switch on continuously. Its listing specifies 12V, so it is not the pick for a stated 24V requirement.

Listed on Amazon as: Seachoice Foot Control Switch For Manually Operated Trolling Motors, Rated Up to 50 Amps DC

#4

4. ONTISIV Foot Switch

Best for: Wide-voltage manual-motor users.

Why it ranks #4: Its listed 12V–24V compatibility, 50A capacity, IP65 rating, and corrosion-resistant, anti-stick features suit manual-motor use.

The ONTISIV switch combines a stated 12–24V range with a 50A capacity, a useful pairing for buyers choosing a foot control for a manual trolling motor. Its pedal starts or stops the motor without reaching for the head, helping keep hands on a rod or available for navigation.

The hands-free pedal control supports start and stop by foot, so anglers can avoid bending toward the motor head during operation. Its 12–24V compatibility and up-to-50A rating specify the electrical range and current capacity for buyers checking a manual trolling motor setup. The title also lists IP65 waterproofing, corrosion resistance, and anti-stick operation—features relevant to marine exposure and pedal response. The supplied details do not identify installation hardware or dimensions.

Skip it if you need listed mounting dimensions or installation hardware before choosing; the supplied ONTISIV details do not provide either.

The ONTISIV fits anglers seeking foot-operated start/stop control for a 12–24V manual trolling motor, with a listed 50A capacity. Its supplied details leave dimensions and mounting hardware unspecified, which may matter for deck planning.

Listed on Amazon as: Trolling Motor Foot Switch, 12V-24V 50A, IP65 Waterproof, Corrosion Resistant, Anti-stick, Instant Response For Manual Motors

#5

5. Pirjeco Foot Control Switch

• Material: Plastic
• Compatible Devices: Trolling Motor
• Material Type: Plastic

Best for: Anglers seeking angled control.

Why it ranks #5: The product lists a 12V–24V range, 50A capacity, IP65 protection, and an inclined anti-slip pedal for hands-free manual control.

An inclined, anti-slip pedal gives the Pirjeco foot switch its clearest practical distinction, supporting foot presses without bending to the motor head. The switch is listed for 12–24V trolling motors and has a 50A DC rating, making it an option for anglers seeking foot-operated start and stop control.

The ergonomic incline and anti-slip surface support foot operation while fishing or boating, and the stated instant start/stop operation keeps the workflow at the pedal rather than the motor head. Compatibility spans 12V to 24V manual trolling motors, with an IP65 waterproof rating listed in the title for marine use. Its ON-OFF-ON operation mode is specified, but the supplied information does not describe a continuous-on lever, so buyers wanting that feature should look elsewhere.

Skip it if you require a continuous-on lever; the Seachoice 28101 explicitly lists one, while this switch is described with ON-OFF-ON operation.

Pick the Pirjeco if your manual trolling motor calls for 12–24V foot start/stop control and you value an inclined, anti-slip pedal. The listed ON-OFF-ON mode is not described as continuous-on operation.

Listed on Amazon as: Trolling Motor Foot Control Switch 12V 24V 50 Amps DC Remote Control Trolling Motor Waterproof IP65 Foot Switch for Manual Trolling Motors

#6 · Best V2 Pedal

6. Pirjeco Minn Kota V2 Pedal

Best for: Minn Kota V2 cable-pedal replacement.

Why it ranks #6: This is a dedicated Minn Kota V2 foot pedal with an 18-foot cable and listed 12V–24V, 50A, and waterproof features.

An included 18-foot cable is the clearest practical feature of the Pirjeco foot pedal for Minn Kota V2 trolling motors, giving buyers a stated cable length for routing through a boat setup. The listing also identifies 12–24V and 50A, with waterproof foot control noted in the title.

This product is presented as a foot pedal for Minn Kota V2 motors rather than a generic manual-motor switch, so its named compatibility is central to choosing it. The 18-foot cable is included and can inform cable-routing plans, while the title specifies 12–24V and 50A capacity for electrical matching. Waterproofing is also stated in the title. The listing explicitly says no manual operation, so buyers seeking a manually operated motor control should treat that distinction as decisive.

Skip it if you operate a manual trolling motor and need manual-motor control; the listing explicitly excludes manual operation.

Choose the Pirjeco if you need a foot pedal for a Minn Kota V2 and its included 18-foot cable suits your routing needs. Its stated no-manual-operation limitation rules it out for manual trolling motors.

Listed on Amazon as: Foot Pedal for Minn Kota V2 Foot Control Trolling Motor with18' cable 12V-24V 50A Black Waterproof Foot Control Switch No manual operation

#7

7. T-H Marine FCS-3-DP

• Compatible Devices: Boats with Transom Mount

Best for: Transom-mount boat owners.

Why it ranks #7: It is identified as a Sure Foot trolling motor foot switch and lists compatibility with boats with transom-mount motors, but provides few other specifications.

Compatibility with boats using a transom-mount trolling motor is the clearest specific fit listed for the T-H Marine FCS-3-DP Sure Foot switch. Its 6 x 4 x 1-inch dimensions give buyers concrete sizing information for planning where the foot switch will sit aboard their boat.

The product is identified as a trolling motor foot switch, and its listed compatibility is boats with transom-mount motors. That fit information can help narrow the choice for owners of that motor arrangement, while the 6 x 4 x 1-inch dimensions provide a reference for deck-space planning. The supplied listing does not state voltage, amperage, waterproof rating, wiring, or control mode, so buyers who must match those details will need more product information before selecting it.

Skip it if you need listed voltage, amperage, or waterproofing details; this product information provides none of those specifications.

This is a narrow option for boat owners whose trolling motor is transom-mounted and who can work from the listed dimensions. The supplied facts do not establish electrical ratings or control mode, so those needs remain a boundary.

Listed on Amazon as: T-H Marine – FCS-3-DP – SURE FOOT TROLLING MOTOR FOOT SWITC

#8 · Best Minn Kota Replacement

8. Minn Kota 2264040 Switch

• Material: The 'material' attribute is not explicitly…
• Material Type: The 'material' attribute is not explicitly…

Best for: Minn Kota momentary-switch replacement.

Why it ranks #8: This momentary switch has screw terminals and lists fit for several Minn Kota foot-controlled All Terrain, Edge, and Maxxum models.

Screw terminals are the specific connection detail that sets the Minn Kota 2264040 apart in its listing, giving buyers a defined terminal style for a momentary foot-pedal replacement. Its fit information names All Terrain, Edge, and Maxxum/SC foot-controlled motor families across stated model years.

The momentary foot-pedal format makes this a replacement switch rather than a complete pedal assembly. Its screw terminals identify the connection style, while the listed compatibility spans Minn Kota All Terrain foot-controlled models from 1994–2008, Edge models from 2006 onward, and Maxxum/SC models from 1998 onward. Those family and year ranges give buyers a practical basis for checking an existing control. The supplied information does not specify dimensions or material, so those details cannot guide installation planning.

Skip it if you need stated dimensions or material to plan a replacement; the supplied listing does not provide those details.

The Minn Kota 2264040 suits owners replacing a momentary switch in a listed All Terrain, Edge, or Maxxum/SC foot-controlled motor. Check the stated model-family ranges; it is a switch, not a full pedal.

Listed on Amazon as: Minn Kota 2264040 Switch – Momentary, Foot Pedal, W/Screw Terminals

#9

9. Generic 2264040 Switch

• Material: Plastic
• Compatible Devices: Minn Kota, MotorGuide
• Material Type: Plastic

Best for: Minn Kota and MotorGuide pedal repairs.

Why it ranks #9: It is a momentary replacement switch with listed compatibility for specified Minn Kota and MotorGuide foot-control models, rather than a standalone pedal.

A momentary foot-pedal switch with compatibility spanning specified Minn Kota and MotorGuide models makes this part a targeted repair choice. Its fit list names model families and production ranges, helping buyers check whether it corresponds to an existing pedal rather than choosing a complete trolling-motor control.

The OFF-NONE-ON operation mode identifies this as a momentary switch, useful when replacing a pedal control rather than adding continuous operation. The fit list covers All Terrain/FC and AT/FC models from 1994 to 2008, Edge/FC from 2006 onward, and Maxxum/FC/SC from 1998 onward, with another Maxxum/FC range through 2005. Those model details support fit checking; the listed 1-inch dimensions and brass contacts further describe the part.

Skip it if you have a MotorGuide five-speed pedal needing rotary speed selection; the Generic MHF15001T is listed for that repair instead.

This switch suits owners replacing a momentary control in one of the listed Minn Kota or MotorGuide pedal families. Match the motor family and model range carefully; the supplied fit information is not universal.

Listed on Amazon as: Foot Control Momentary Switch Compatible with Minn Kota & MotorGuide, Part 2264040

#10

10. MotorGuide 5-Speed Rotary Switch

• Material: Plastic
• Material Type: Plastic

Best for: MotorGuide five-speed pedal repair.

Why it ranks #10: This is a replacement rotary speed-control switch for most MotorGuide 5-speed foot pedals, not a general start-and-stop foot switch.

A five-speed rotary switch for MotorGuide foot pedals makes this replacement part relevant to anglers restoring speed selection on a compatible pedal. The listing identifies the MHF15001T and says it fits most MotorGuide five-speed foot pedals, providing a focused alternative to a complete foot-control switch.

The rotary design restores speed control at the foot pedal, keeping adjustments accessible while operating the trolling motor. Its stated fit is most MotorGuide five-speed foot pedals, so it is aimed at replacement rather than adding a general start/stop control. The 1 x 1.5 x 1-inch dimensions and 14.2-gram weight give useful handling and space context for a small part. Confirm that the pedal is a compatible five-speed MotorGuide model before relying on this switch.

Skip it if you need a complete foot switch for general motor start/stop control; this part replaces the five-speed selector in compatible MotorGuide pedals.

Choose the MHF15001T when a compatible MotorGuide five-speed pedal needs its rotary speed control restored. It is a small replacement switch, not a standalone foot pedal or a general-purpose start/stop controller.

Listed on Amazon as: 5-Speed Foot Pedal Rotary Switch, Fits MotorGuide Trolling Motors, MHF15001T