Best Hitch Carrier For Motorcycle: Compare 10 Racks

#1 · Best Overall

1. Black Widow Aluminum Motorcycle Carrier

• Load Capacity: 400 lb
• Material: Aluminum
• Compatible with Vehicle Type: Motorcycle

Best for: Lightweight single-bike haulers.

Why it ranks #1: Its 400-pound capacity, aluminum construction, 2-inch Class III or IV fit, loading ramp, and included anti-tilt device suit common single-bike hauling.

The aluminum frame keeps this carrier lighter to handle than a steel rack, while its 400-pound capacity accommodates a motorcycle, e-bike, or fat-tire bike. It fits Class III or IV 2-inch receivers, and the roll-on ramp can attach on either side for more flexible loading access.

The ramp rolls on and off the carrier and secures flat when unused, so loading access can be chosen to suit the parking space and the rack stores more compactly. Aluminum construction supports a 400-pound load without the listed weight of a steel carrier. An included anti-tilt device helps minimize movement in transit, while the included youth-bike spacer adapter bar provides an additional setup option. This is a single-carrier solution for compatible 2-inch hitches, not a two-bike rack.

Skip it if you need to transport two motorcycles together; the Black Widow AMC-600-2 carries two on one carrier.

Choose this aluminum rack for a single motorcycle, e-bike, or fat-tire bike when a manageable carrier and side-selectable ramp matter. The vehicle needs a Class III or IV 2-inch receiver, and the load must remain within 400 pounds.

Listed on Amazon as: Black Widow Aluminum Motorcycle Hitch Carrier with Ramp for eBike, 400 lb

#2 · Highest Capacity

2. VEVOR 600 lb Steel Carrier

• Load Capacity: 600 lb
• Material: Q235B Steel
• Compatible with Vehicle Type: Car

Best for: Higher-capacity steel hauling.

Why it ranks #2: The 600-pound rating and 47-inch ramp serve heavier bikes; the steel carrier fits a 2-inch receiver and lists ratchet straps and a stabilizer.

A 600-pound capacity gives the VEVOR steel carrier room for heavier motorcycles, while its 47-inch ramp supports roll-on loading. The 76-by-7-inch carrier track provides a defined loading area, and the rack is specified for vehicles with a 2-inch hitch receiver.

Q235B steel construction pairs with the 600-pound stated capacity for buyers hauling a heavier bike, and the 76-by-7-inch track gives the motorcycle a substantial straight loading surface. The 47-inch ramp is longer than the carrier’s track width and supports loading without lifting the bike onto the rack. At 61.7 pounds, the carrier itself is a consideration when handling or storing it. Installation height is recommended at 7.87 to 19.7 inches from center hole to ground.

Skip it if you want a listed stabilizer and ratchet straps included; the Mockins 73-inch carrier includes both.

This VEVOR suits riders prioritizing a 600-pound rating and a 47-inch ramp for loading onto a 2-inch-receiver vehicle. Check the stated installation-height range and account for the 61.7-pound rack when handling it.

Listed on Amazon as: VEVOR Motorcycle Carrier, 600 LBS Steel Motorcycle Carrier Hitch Mount with 47" Longer Ramp, Scooter Dirt Bike Trailer Hauler with Ratchet Straps and Stabilizer, for Car, Truck with 2" Hitch Receiver

#3 · Tilting Ramp

3. Mockins 83-inch Tilting Carrier

• Load Capacity: 500 lb
• Material: Steel
• Compatible with Vehicle Type: Car, Truck, Van

Best for: Wide-tire tilting-ramp setup.

Why it ranks #3: Its 500-pound capacity, tilting ramp, 83-inch frame, and included hitch stabilizer, hitch lock, and straps make it a well-equipped loading option.

The tilting ramp distinguishes this 83-inch Mockins carrier, helping with mounting and dismounting while the 6-inch-wide frame supports tires up to 5.5 inches. Its 500-pound capacity covers listed motorcycles, dirt bikes, scooters, and e-bikes on 2-inch receivers.

The 83-by-6-inch steel frame gives a long loading track, and compatibility with tires up to 5.5 inches accommodates the wide tires specified for e-bikes and other listed vehicles. A tilting ramp is intended to ease mounting and dismounting, reducing the need to lift a bike onto the carrier. The included hitch stabilizer and hitch lock address rack movement and securing the hitch connection; four ratchet straps and four loop straps provide tie-down components. The listed carrier weight is 75 pounds.

Skip it if you want a 47-inch ramp and a lower listed carrier weight; the Mockins 73-inch carrier weighs 51 pounds and includes a 47-inch ramp.

This Mockins fits buyers wanting a tilting loading setup for a wide-tire bike or scooter, with straps and hitch hardware supplied. Confirm that the 2-inch receiver and 500-pound limit suit the vehicle and intended load.

Listed on Amazon as: Mockins 83" Tilting Motorcycle Hitch Carrier with Ramp w/ 500 Lbs. Capacity

#4 · Wheel Chock

4. Black Widow Steel Carrier

• Load Capacity: 600 lb
• Material: Steel
• Compatible with Vehicle Type: Off-Road Motorcycle…

Best for: Traction-coated steel loading.

Why it ranks #4: This steel carrier supports 600 pounds and includes a wheel chock; its grit-coated track and ramp add traction during loading.

Grit-coat traction on both the track and ramp is the defining loading aid on this 600-pound Black Widow steel carrier. It fits Class III or IV 2-inch hitches and includes a wheel chock, supporting transport of motorcycles, dirt bikes, or scooters without a trailer.

The grit-coated track and ramp provide a traction surface during loading and unloading, a useful feature when rolling a motorcycle up the ramp. A wheel chock helps position the front wheel, while the 600-pound rating accommodates a broad range of listed motorcycles, dirt bikes, and scooters. Powder-coated 14-gauge steel forms the carrier, but the 98-pound listed weight makes installation and removal more demanding than lighter aluminum racks. The ramp attaches on the right side, which fixes the loading approach.

Skip it if you need the ramp on either side; the Black Widow AMC-600-2 installs its ramp on either side.

Choose this Black Widow for a 600-pound steel carrier with traction-coated loading surfaces and a wheel chock. It suits compatible 2-inch Class III or IV hitches, provided the right-side ramp approach and 98-pound rack weight work.

Listed on Amazon as: Black Widow Steel Motorcycle Hitch Carrier, Wheel Chock, 600 lb, 2 In Hitch

#5

5. VEVOR 83-inch Carrier

• Load Capacity: 500 lb
• Material: Carbon Steel
• Compatible with Vehicle Type: Car

Best for: Anti-tilt steel carrier.

Why it ranks #5: The 500-pound steel carrier offers an 83-inch platform and anti-tilt lock device for riders needing more capacity than a 400-pound rack.

An anti-tilt lock device is the defining included feature on this 83-inch VEVOR carrier, addressing rack movement at the hitch during transport. Its carbon-steel frame supports up to 500 pounds and is specified for a 2-inch receiver, with a powder-coated finish for outdoor exposure.

The 83.46-inch carrier length provides an extended track for loading a motorcycle, scooter, or e-bike, while the 500-pound capacity sets a clear upper load boundary. Carbon-steel construction gives the rack its heavy-duty structure, and the powder-coated finish is described as resisting corrosion and wear in outdoor environments. The anti-tilt lock device helps stabilize the hitch-mounted carrier. At 70.6 pounds, it is not a lightweight item to lift or move during installation and storage.

Skip it if you need a 600-pound load rating; the VEVOR TD-1004-03 is rated to 600 pounds and includes a 47-inch ramp.

This carrier suits buyers seeking an extended steel track and an included anti-tilt lock for a 2-inch hitch. The 500-pound limit and 70.6-pound rack weight should both fit the planned load and handling routine.

Listed on Amazon as: VEVOR 83" Motorcycle Carrier, 500 lbs Capacity, Heavy Duty Steel Hitch Mount Rack with Anti-Tilt Lock Device, Scooter Dirt Bike Trailer Hauler for Car Truck with 2-Inch Hitch Receiver

#6 · Long Loading Ramp

6. Mockins 73-inch Carrier

• Load Capacity: 500 lb
• Material: Steel
• Compatible with Vehicle Type: Dirt Motorcycle, Truck

Best for: One-person ramp loading.

Why it ranks #6: Its 500-pound capacity, 47-inch ramp, 5.5-inch track, hitch stabilizer, and included ratchet and loop straps cover key loading needs.

A 47-inch integrated ramp makes the 73-inch Mockins carrier a practical choice for riders seeking one-person roll-on loading instead of lifting a bike onto the rack. The 5.5-inch-wide track fits tires up to 5.5 inches and supports loads up to 500 pounds.

The integrated 47-inch ramp is the key workflow advantage: it provides a loading path for one person, while the 73.5-inch carrier length gives the bike a substantial track. Tire compatibility extends to 5.5 inches, covering the stated fat-tire and dual-sport use cases. The included hitch stabilizer, four loop straps, and four ratchet straps add components for stabilizing the rack and securing the bike. At 51 pounds, the carrier is lighter to handle than several heavier steel options listed here.

Skip it if you need an explicitly listed car, truck, or van fit; the Mockins MA-HM-DBC-83-TLTS-96 lists all three vehicle types.

Select this Mockins for a dirt bike or compatible wide-tire bike when one-person ramp loading and included tie-downs matter. Its stated vehicle compatibility names dirt motorcycles and trucks, so match that listing to your setup.

Listed on Amazon as: Mockins 500 Lbs. Capacity 73" Motorcycle Hitch Carrier with Loading Ramp

#7

7. ECOTRIC 500 lb Carrier

• Load Capacity: 500 lb
• Material: Steel
• Compatible with Vehicle Type: Vehicle with 2" square receiver (class II…

Best for: Broad receiver-class compatibility.

Why it ranks #7: This steel carrier supports 500 pounds and fits 2-inch receivers across listed Class II through V hitches, with a ramp included.

Compatibility with 2-inch square Class II, III, IV, or V receivers gives this ECOTRIC carrier an unusually broad stated hitch-class range. Its steel frame supports up to 500 pounds, and the included ramp can be used for loading from either side.

The wide receiver-class specification helps owners with a 2-inch square Class II through V hitch identify compatibility without relying on a narrower class listing. Steel construction supports the 500-pound capacity, while the ramp and two-sided loading options let the rider approach from the more accessible side. The package includes installation instructions and mounting hardware, supporting assembly before use. Its dimensions of 75.91 by 32.24 by 9.06 inches are worth considering when planning vehicle access and storage.

Skip it if you need a 600-pound rating for a heavier motorcycle; the Goplus AT4338+XIN is rated to 600 pounds.

Choose the ECOTRIC when broad stated hitch-class compatibility and loading from either side are useful. Its 500-pound steel rack suits a compatible 2-inch square receiver, but buyers with heavier loads need a higher-rated carrier.

Listed on Amazon as: ECOTRIC 500LB Hitch Mount Motorcycle Carrier Transportation Racks Hitch

#8

8. Black Widow 6-Foot Ramp Carrier

• Load Capacity: 400 lb
• Material: Aluminum
• Compatible with Vehicle Type: Dirt Motorcycle

Best for: Gentler incline for loading.

Why it ranks #8: The 400-pound aluminum carrier fits a 2-inch Class III or IV receiver and its six-foot ramp offers a gentler loading approach.

The six-foot ramp creates a gentler loading incline than a shorter ramp, helping riders roll a dirt bike, e-bike, or fat-tire bike onto this aluminum carrier. It fits Class III or IV 2-inch receivers, supports 400 pounds, and accommodates wheels up to 5.5 inches wide.

The extra-long six-foot ramp reduces the loading incline and locks onto the carrier frame for self-storage, so it remains with the rack between uses. Bilateral loading lets the ramp attach to either side, giving more choice over the approach. Aluminum construction and a 43-pound listed weight make the carrier easier to handle than the heavier steel options, while the 400-pound capacity sets the load boundary. The 5.5-inch wheel-width limit helps buyers check tire fit before loading.

Skip it if you need to carry a bike exceeding 400 pounds; the VEVOR TD-1004-03 has a 600-pound capacity.

This aluminum Black Widow suits riders who value a long, self-storing ramp and flexible loading-side access for a single bike. Keep the 400-pound capacity and 5.5-inch wheel-width limit in mind when selecting a load.

Listed on Amazon as: Black Widow Aluminum Dirt Bike Hitch Carrier, 400 lb, Extra-Long 6 Ft Ramp

#9

9. Goplus 600 lb Carrier

• Load Capacity: 600 lb
• Material: Steel
• Compatible with Vehicle Type: vehicle with 2" receiver

Best for: Wide-tire 600-pound carrier.

Why it ranks #9: Its 600-pound steel construction and stated fit for tires up to 7.5 inches suit wide-tire bikes, though the carrier weighs 98 pounds.

A stated 7.5-inch tire fit pairs with a 600-pound load rating on this Goplus steel carrier, accommodating wide tires and heavier motorcycles within its stated limits. The rack fits a vehicle with a 2-inch receiver and includes a loading ramp and two straps.

The 7.5-inch tire-width specification is the main fit advantage for buyers whose motorcycle tires exceed the narrower tracks listed on some carriers. Steel construction and a 600-pound capacity support heavier loads, while the included ramp provides a roll-on route to the carrier. Two straps are supplied for securing the bike. Goplus recommends not exceeding 55 mph with a motorcycle loaded; it notes that the actual speed is adjustable according to motorcycle weight, so this is a key operating consideration.

Skip it if you need a higher stated speed recommendation; the Goplus listing advises not exceeding 55 mph with a loaded motorcycle.

This Goplus is for riders needing a wide tire track and 600-pound capacity on a 2-inch receiver. Its ramp and two straps support loading and securing, but the 55-mph recommendation is an important boundary for travel.

Listed on Amazon as: Goplus Motorcycle Hitch Carrier, 600LBS Motorcycle Carrier Hitch Mount with 2 Straps, Loading Ramp, Dirt Bike Trailer, Heavy Duty Motor Cycle Rack, Fit Up to 7.5” Wide Tire

#10

10. Black Widow Double Carrier

• Load Capacity: 600 lb
• Material: Aluminum
• Compatible with Vehicle Type: Motorcycle

Best for: Two-bike hitch transport.

Why it ranks #10: It carries two motorcycles with 600 pounds total capacity and 400 pounds per track, but that specialized dual-bike design is less direct for one-bike hauling.

Its dual-track layout carries two motorcycles on one Class III or IV 2-inch hitch, making this Black Widow a solution for paired-bike trips without a trailer. The aluminum carrier has a 600-pound total capacity, with the supplied feature description listing 400 pounds per track.

Two tracks let riders transport two motorcycles on one carrier rather than arranging separate racks or a trailer. The aluminum construction keeps the 69-pound carrier lighter to handle than the listed 98-pound steel carrier in this group, while the ramp attaches on either side to suit the loading approach. An included anti-tilt device addresses carrier movement during transport. Capacity requires attention: the overall rating is 600 pounds, and the feature description also specifies 400 pounds per track.

Skip it if you transport only one bike and favor a longer loading ramp; the Black Widow AMC-400L has a six-foot ramp.

Pick this rack when carrying two motorcycles on a compatible 2-inch hitch is the priority. Its aluminum frame and side-selectable ramp help with handling and access, but keep both the 600-pound overall limit and per-track rating in view.

Listed on Amazon as: Black Widow Double Motorcycle Bike Hitch Carrier, Loading Ramp, 600 lb Cap