Best Hydraulic Jack Plate For 60 Hp Outboard

#1 · Best Overall

1. RisWhiteMeteors 6-Inch Electric Plate

Best for: Broad-brand 60 hp fit.

Why it ranks #1: Its 10–150 hp compatibility includes 60 hp, while 6.7 inches of vertical travel and a manual release valve make it the strongest hydraulic match.

A stated 10–150 hp range puts this RisWhiteMeteors plate within the 60 hp target while leaving room for other outboard sizes. Its electric hydraulic lift enables height adjustment without manually repositioning the motor, and 6.7 inches of vertical travel gives the setup a substantial adjustment range.

The electric hydraulic operation lets the operator adjust motor height without manual repositioning, a practical advantage when conditions call for changing the mounting height on the water. Its 6.7-inch vertical travel supplies room for those adjustments, while the stated 10–150 hp capacity covers a 60 hp outboard. Compatibility information names Mercury, Yamaha, Suzuki, and Honda among the supported brands, so buyers can assess engine-brand fit alongside the horsepower range before planning an installation.

Skip it if you want a manual lift for a 60 hp motor; QNCKJZV TC-2507 is rated up to 60 hp and uses manual lift.

For a 60 hp owner seeking electric hydraulic adjustment and broad stated engine-brand compatibility, this plate offers a fitting power range. Its 6.7-inch travel and 6-inch plate format are the relevant boundaries when assessing the boat setup.

Listed on Amazon as: 6" Electric Hydraulic Jack Plate for 10-150 HP Outboard Motors, 6.7 Inch Vertical Travel, Manual Release Valve, Universal Fit ZZ001

#2 · Exact 60 HP Fit

2. QNCKJZV TC-2507 Manual Plate

• Dimensions: 17.72 x 16.34 x 4.53 in
• Material: Aluminum
• Load Capacity: 2.5E+2 kg

Best for: Manual lift for 60 hp.

Why it ranks #2: The listing explicitly states compatibility up to 60 hp and a 4-inch setback, although this is a manual—not hydraulic—plate.

An explicit rating up to 60 hp makes this QNCKJZV plate a direct horsepower match for the roundup's target. Its manual power lift and 4-inch setback provide the core format, while the listing also identifies it for adapting long-shaft engines to short-shaft transoms.

The stated maximum of 60 hp directly covers the target motor size, and the 4-inch setback defines the plate's extension behind the transom. Manual power lift means height adjustment is not described as electric or hydraulic, so buyers should choose it for a setup where manual operation suits their workflow. The listing says it can adapt long-shaft engines to short-shaft transoms, which gives the plate a specific fit use, while its aluminum-alloy construction is identified for marine durability and corrosion resistance.

Skip it if you want electric hydraulic height adjustment; RisWhiteMeteors 6 Inch Electric Hydraulic Jack Plate offers powered adjustment and 6.7 inches of travel.

A 60 hp owner seeking a specifically rated manual plate, 4-inch setback, or long-shaft-to-short-shaft transom adaptation may find a close match here. Manual operation is the key boundary for buyers comparing powered lifts.

Listed on Amazon as: 4-Inch Manual Power Lift Setback Jack Plate for Up to 60 HP Outboard Boat Motors – Transom Mount TC-2507

#3 · Saltwater Protection

3. Winibo JPH1500 Electric Plate

• Dimensions: 16.54 x 11.02 x 17.72 in
• Weight: 44.5 lb
• Material: Aluminum-Alloy, Stainless Steel
• Load Capacity: 7055 lb

Best for: Saltwater electric adjustment.

Why it ranks #3: Rated for outboards up to 150 hp, it covers 60 hp and provides 6.69 inches of stepless lift with electrophoresis coating and anodic protection.

Electrophoresis coating and anodic protection are the defining protections on this Winibo plate, which the listing specifies for harsh saltwater environments. Its one-touch electric hydraulic control enables motor-height changes across 6.69 inches of stepless travel, and the stated maximum of 150 hp includes a 60 hp outboard.

The single-button control raises or lowers the motor across 6.69 inches of stepless vertical travel, allowing incremental height selection rather than limiting the operator to listed positions. Electrophoresis coating and anodic protection are specified for corrosion resistance in harsh saltwater environments, a practical consideration for marine use. The plate is listed for outboards up to 150 hp, and its aluminum-alloy and stainless-steel materials are identified in the specifications; those details help buyers compare its operating style and materials with their boat requirements.

Skip it if you need a plate rated above 150 hp; Bob's Machine 100-106010 is rated up to 300 hp.

A 60 hp owner wanting one-touch electric adjustment and listed corrosion protections for saltwater use has a clear reason to consider this Winibo. Its stated 150 hp ceiling is the important fit boundary for larger engines.

Listed on Amazon as: 8" Electric Hydraulic Jack Plate for Outboard Motor up to 150HP

#4 · Compact Setback

4. Bob's Machine 6-Inch Jac Plate

• Dimensions: 6.02 x 16.73 x 13.78 in
• Weight: 23 kg
• Material: Metal
• Load Capacity: 23 kg

Best for: Compact internal-pump rigging.

Why it ranks #4: Its 6-inch setback is a relatively short listed option, with 7.5 inches total lift and a rating up to 300 hp.

An integrated internal hydraulic pump removes the need for a separate pump mount, helping keep rigging more organized. Bob's Machine rates this 6-inch-setback plate for outboards up to 300 hp, so a 60 hp motor falls within its stated capacity while the lift provides room for positioning adjustments.

The one-piece 6-inch setback combines 1.5 inches of built-in lift with 6 inches of adjustable travel, for 7.5 inches total lift. That gives a 60 hp owner a defined range for positioning the outboard, while the internal hydraulic pump avoids arranging a separate pump mount. The stated 300 hp maximum and 625 lb motor-weight limit are substantially broader than this roundup's target, making those published limits useful when checking the intended engine against the plate.

Skip it if you need a 12-inch setback; Bob's Machine 100-112112 provides that setback with the same stated 7.5-inch total lift.

This is a fit for 60 hp owners who want hydraulic positioning, a 6-inch setback, and an internal pump arrangement. Its compact setback is the key boundary for boats whose transom setup calls for more extension.

Listed on Amazon as: Bob's Machine 6 in Jac Plate 100-106010, 6 in Setback – Rated up to 300 HP

#5 · Remote Pump Layout

5. Bob's Machine 100-106000

• Weight: 70 lb
• Material: Alloy Steel
• Load Capacity: 300 hp

Best for: Complete-component hydraulic setup.

Why it ranks #5: This 6-inch-setback plate provides 7.5 inches of lift and lists a remote-mounted pump, wiring harness, hoses, and control switch.

A supplied pump, wiring harness, hoses, control switch, and oil make this Bob's Machine plate notable for its listed installation components. It provides 7.5 inches of lift and a 6-inch setback, with a stated capacity up to 300 hp that includes a 60 hp outboard.

The 7.5-inch lift gives the operator a stated range for adjusting outboard height, while the 6-inch setback specifies the plate's extension. The included pump, wiring harness, hoses, control switch, and oil identify major components supplied for the hydraulic setup, helping buyers understand what the package lists for installation. The remote-mount pump stays dry in an internal location, according to the product description. Its stated 300 hp and 625 lb limits encompass a 60 hp engine when within the weight limit.

Skip it if you want a listed 23 kg unit weight; Bob's Machine 100-106010 specifies that weight and a 6-inch setback.

A 60 hp owner seeking hydraulic lift with major system components listed in the package may value this setup. Its 70 lb listed weight and 6-inch setback are practical boundaries to consider for the boat.

Listed on Amazon as: Bob's Machine 100-106000 Standard Hydraulic Jack Plate 6" Setback 300HP Outboard

#6

6. Lamerto JP5060R

• Dimensions: 21.65 x 18.9 x 12.2 in
• Weight: 28.6 kg
• Material: Aluminum alloy

Best for: Aluminum 6-inch-setback plate.

Why it ranks #6: The aluminum-alloy plate has a 6-inch setback, a stated 0–12 cm lifting range, and an engine limit up to 300 hp.

A 0–12 cm lifting range gives this Lamerto plate a clearly specified adjustment span, while its 6-inch setback keeps the extension compact. The aluminum-alloy plate is listed for outboards up to 300 hp, so a 60 hp motor is within its stated horsepower range.

The 0–12 cm lifting range allows motor-height adjustment within a defined span, useful for buyers comparing the required movement with their setup. Its 6-inch setback specifies how far the plate extends, and the aluminum-alloy construction identifies the listed material. Lamerto states compatibility with outboards up to 300 hp and describes fitment as a direct replacement for the JP5060R. Those details provide a starting point for evaluating horsepower, setback, and replacement-model suitability for a 60 hp boat.

Skip it if you need 7.5 inches of stated total lift; Bob's Machine 100-106010 lists that lift with a 6-inch setback.

For a 60 hp owner seeking an aluminum-alloy plate with a 6-inch setback and a specified 0–12 cm range, this Lamerto merits consideration. Its listed travel is the main boundary to compare with the required adjustment.

Listed on Amazon as: 6" Setback Hydraulic Jack Plate JP5060R Fit for Outboard Models Up To 300hp

#7

7. Bob's Machine 12-Inch Jac Plate

• Weight: 66 lb

Best for: Longer-setback hydraulic setup.

Why it ranks #7: It offers 7.5 inches of total lift and a 300 hp maximum, but its 12-inch setback is a larger installation choice for a 60 hp setup.

The 12-inch setback distinguishes this Bob's Machine hydraulic plate for boats that call for more engine extension behind the transom. Its internal pump avoids a separate pump mount, while 7.5 inches of total lift gives a 60 hp owner adjustable positioning within a plate rated up to 300 hp.

This one-piece plate pairs a 12-inch setback with 1.5 inches of built-in lift and 6 inches of adjustable travel, totaling 7.5 inches. That combination gives buyers a specified extension and a useful range for positioning the outboard. The integrated internal hydraulic pump removes the need for a separate pump mount, which can simplify the rigging layout. Bob's Machine lists capacity up to 300 hp and 625 lb, comfortably encompassing a 60 hp motor within those stated limits.

Skip it if you need a shorter 6-inch setback; Bob's Machine 100-106010 offers that format with the same stated total lift.

Choose this for a 60 hp setup where a 12-inch setback and hydraulic positioning suit the transom arrangement. That extension is also its key boundary: buyers seeking a shorter plate should compare setback requirements first.

Listed on Amazon as: Bob's Machine 12 in Jac Plate 100-112112, 12 in Setback Rated up to 300 HP

#8

8. Bob's Machine 10-Inch Jac Plate

• Dimensions: 10 x 16.73 x 13.78 in
• Weight: 27 kg
• Material: Aluminum
• Load Capacity: 61 lb

Best for: Ten-inch setback with hydraulic lift.

Why it ranks #8: The 10-inch setback model provides 7.5 inches of total lift and supports up to 300 hp, exceeding the target engine rating substantially.

A 10-inch setback gives this Bob's Machine plate a middle ground between the listed 6- and 12-inch formats. Its integrated internal hydraulic pump avoids a separate pump mount, and 7.5 inches of total lift provides adjustment for a 60 hp motor within its 300 hp rating.

The one-piece plate combines a 10-inch setback with 1.5 inches of built-in lift and 6 inches of adjustable travel, giving 7.5 inches total lift. That specified range supports outboard positioning, while the integrated internal pump helps avoid a separate pump mount in the rigging layout. The plate is rated up to 300 hp and 625 lb, so it covers a 60 hp engine within those limits. The 10-inch setback remains the key dimension to compare against the boat's transom requirements.

Skip it if you need a shorter 6-inch setback; Bob's Machine 100-106010 provides that dimension with 7.5 inches of total lift.

This is for 60 hp owners seeking Bob's Machine's hydraulic setup with a 10-inch setback and 7.5 inches of lift. Check that the longer extension suits the transom arrangement before choosing it.

Listed on Amazon as: Bob's Machine 10 in Jac Plate 100-111000, 10 in Setback Rated up to 300 HP

#9

9. Volantixi 8-Inch Hydraulic Plate

• Dimensions: 18.5 x 14.17 x 13.39 in
• Material: Aluminum

Best for: Fast-lift 8-inch setback.

Why it ranks #9: Its 8-inch setback, 7.5-inch lift, and 300 hp maximum are documented, but the listing does not identify a 60 hp-specific fit.

A stated lift time of under six seconds under full power is the headline here, pairing quick motor adjustment with an 8-inch setback. Volantixi lists the plate for outboards up to 300 hp and 625 lb, so its capacity includes a 60 hp motor and leaves substantial headroom.

The 7.5-inch vertical lift gives the operator a defined adjustment range, while the listing says the plate lifts heavy outboards under full power within six seconds. Its 8-inch setback is integrated into a one-piece construction, and the hydraulic pump sits inside the plate; together, those features avoid the need for extra C-channels to extend setback and a separate pump mount. The stated 300 hp and 625 lb limits cover a 60 hp motor, subject to its weight remaining within the listed limit.

Skip it if you want a 6-inch setback; Bob's Machine 100-106010 specifies that setback and also provides 7.5 inches of total lift.

This suits a 60 hp owner who values a stated rapid lift, 7.5 inches of travel, and an 8-inch setback. Its 56 lb unit weight and setback length are important considerations for the boat and transom.

Listed on Amazon as: 100-108001 Action Series Hydraulic Jack Plate, 8 Inch Setback, Max 300 HP, 7.5" Lift for Outboard Motors, Up to 625 lbs

#10

10. Winibo JPH3500K Kick-Back Plate

• Dimensions: 7.68"D x 14.17"W x 12.8"H
• Weight: 66 lb
• Material: Aluminum, Stainless Steel

Best for: Electric lift and kick-back.

Why it ranks #10: This electric plate has a kick-back feature and 12-volt operation, but the supplied listing gives no engine horsepower range for confirming 60 hp fit.

Kick-back is the defining feature of this Winibo plate, paired with electric operation for outboard lift and tilt. Its 12-volt supply and 8-inch size make the operating format explicit, while the listing identifies it for boat outboard motors rather than stating a specific horsepower ceiling.

The electric operating mode is specified for outboard lift and tilt, giving the buyer a powered alternative to manual adjustment. The 12-volt specification identifies its electrical supply, a practical detail to account for when planning the boat's installation. Its kick-back feature is included in the product description, and the plate uses aluminum and stainless steel. Because the supplied specifications do not give a horsepower maximum, buyers with a 60 hp outboard should treat engine-capacity verification as an unresolved fit requirement rather than assume a rating.

Skip it if you need a stated 60 hp capacity; QNCKJZV TC-2507 explicitly lists compatibility up to 60 hp and manual lift.

This may suit a 60 hp owner seeking electric lift and tilt with a kick-back feature, provided the engine capacity is confirmed from product details. The missing horsepower limit in the supplied specifications is a material fit boundary.

Listed on Amazon as: 8" Electric Hydraulic Jack Plate with Kick-Back for Outboard Motor