Best Lift Gate For Trailer: Compare Tailgate Lift Assist Kits

#1 · Best Overall

1. Gorilla-Lift Assist

• Material: Alloy Steel
• Material Type: Alloy Steel
• Compatible with Vehicle Type: Trailer

Best for: Heavy Utility Trailer Gates.

Why it ranks #1: Its adjustable two-sided assembly is made for open utility trailers, and the listed 300-pound capacity covers many heavy gates.

The GORILLA-LIFT’s enclosed two-sided assembly makes most heavy-duty utility trailer tailgates feel virtually weightless, so one person can raise or lower a gate with a light touch. Its adjustable support also helps address tailgate weights that vary between trailers, while the system is specified for open utility trailers with side rails.

Two-sided lift assistance distributes support across the tailgate, helping reduce the risk of gate warping and premature hinge failure noted for heavy-duty use. The adjustable design accommodates different tailgate weights, which can make it a practical choice for utility or ATV trailer owners whose gates are not identical. Its alloy-steel construction and stated 300-pound maximum towing capacity are listed specifications; check that your trailer’s side-rail arrangement matches the stated open-utility-trailer application.

Skip it if you need a system explicitly specified for 10-to-24-inch side rails and a 400-pound gate; Gledewen XLB10 lists those limits.

For owners of open utility or ATV trailers with heavy gates, the adjustable two-sided support can ease repeated raising and lowering. Its stated application is open utility trailers with side rails, so confirm that configuration suits your trailer.

Listed on Amazon as: Genuine GORILLA-LIFT 2-Sided Trailer Tailgate Lift Assist

#2 · Highest Capacity

2. Gledewen Gate Lift Assist

• Material: Alloy Steel
• Material Type: Alloy Steel
• Compatible with Vehicle Type: Car, Trailer

Best for: Higher-Capacity Utility Ramps.

Why it ranks #2: The 400-pound maximum is the highest listed here, with stated compatibility for 10–24-inch rails and 4–6-foot gates.

Gledewen’s lift assist is rated for tailgates or ramps up to 400 pounds, giving owners of heavier open utility trailers a clearly stated capacity boundary. The two-sided system is specified for gates four to six feet high and trailer side rails 10 to 24 inches above the bed, helping narrow fit decisions.

The two-sided layout supports a ramp or tailgate from both sides, while the listed 400-pound maximum weight gives buyers a defined load limit. Its stated rail-height range of 10 to 24 inches and gate-height range of four to six feet provide concrete dimensions to compare with a trailer before installation. The listing describes installation as taking about 30 minutes, a useful planning detail for owners preparing to add lift assistance themselves.

Skip it if you have a gate above six feet; JY PERFORMANCE DAC791 lists compatibility with four-to-six-foot gates too, so neither fits that stated range.

Choose this for an open utility trailer whose rails sit 10 to 24 inches above the bed and whose gate is four to six feet tall. Its 400-pound maximum is the key boundary to respect.

Listed on Amazon as: Trailer Gate Lift Assist, Compatible with Utility Trailer Ramp and Tailgate

#3 · Chain-Driven Option

3. Rack'em RA27C

• Material: Alloy Steel
• Material Type: Alloy Steel
• Compatible with Vehicle Type: Trailer

Best for: Trailers With Limited Rail Space.

Why it ranks #3: Its chain-driven design needs 54 inches of rail space and is specified to reduce a 200-pound gate to less than five pounds.

Rack’em’s chain-driven lift assist needs just 54 inches of rail space, making its compact mounting requirement the key consideration for trailers with limited room. The listing says it reduces a 200-pound gate to less than five pounds, a substantial reduction in lifting effort for compatible utility-trailer gates.

The chain-driven mechanism is identified as the only chain-driven trailer tailgate lift assist in the listing, and its 54-inch rail-space requirement gives buyers a specific measurement for installation planning. The stated reduction from a 200-pound gate to less than five pounds can make repeated raising and lowering much easier. Alloy-steel material is specified, while the lifetime warranty applies specifically to the heavy-duty chrome sprocket chain, not necessarily every component.

Skip it if you need a stated two-sided system with a 300-pound capacity; NAZOU DAC001 lists both features.

Consider this chain-driven option if your utility trailer has at least 54 inches of rail space and its gate aligns with the listed 200-pound example. The chain warranty is specifically for the chrome sprocket chain.

Listed on Amazon as: Double Barrel Chain Driven Trailer Gate Lift Assist (RA27C) by Rack 'EM

#4 · 300-Pound Two-Sided

4. JY Performance Lift Assist

Best for: Open-Trailer Ramp Owners.

Why it ranks #4: This two-sided kit lists a 300-pound load capacity and fits many open utility trailers with 12–24-inch rails and 4–6-foot gates.

JY PERFORMANCE’s two-sided assist is specified for open utility trailers with 12-to-24-inch side rails and four-to-six-foot gates, giving buyers clear dimensions to check. Its 300-pound load capacity and hand-lift operation after installation target owners who want help moving a substantial ramp without treating it as weightless.

The two-sided arrangement is described as preventing uneven stress and wear on the ramp and trailer, which may help preserve the gate over repeated use. Compatibility is stated for most open utility trailers with 12-to-24-inch side rails and gates four to six feet tall. Installation requires drilling, so fitting involves trailer work rather than a hardware-only setup; the listed 300-pound capacity sets a firm limit for gate weight.

Skip it if you cannot drill during installation; Buyers Products 5201000 includes mounting hardware and lists a one-side spring-assisted setup.

This kit fits owners of open utility trailers whose side rails and four-to-six-foot gates match its stated ranges. It supports gates up to 300 pounds, but plan for drilling as part of installation.

Listed on Amazon as: Trailer Gate Lift Assist for Open Utility Trailer Tailgate Ramp

#5

5. NAZOU Tailgate Kit

• Material: Alloy Steel
• Material Type: Alloy Steel

Best for: Daily Utility Trailer Operators.

Why it ranks #5: The two-sided steel kit has a listed 300-pound load capacity, but the supplied data gives fewer trailer-fit dimensions than higher-ranked options.

NAZOU’s integrated ramp springs provide two-sided assistance for heavy-duty trailer gates, helping them lift and lower more smoothly while easing strain on the ramp. The listing gives a 300-pound load capacity and alloy-steel construction, useful specifics for owners evaluating a lift-assist kit for frequent utility-trailer use.

Integrated ramp springs support smoother lifting and lowering, while balanced two-sided assistance is described as reducing uneven wear on the gate and hinges. That combination can matter for daily utility use, where repeated movement may otherwise stress panels and hinge points. The kit measures 36 by 5 by 6 inches and weighs 22 pounds, details that help with planning storage and handling before installation; its stated load capacity is 300 pounds.

Skip it if you need a stated 400-pound capacity; Gledewen XLB10 is rated for gates or ramps up to that limit.

This kit suits utility-trailer owners who open and close a heavy gate regularly and want balanced spring assistance. Keep the gate within its 300-pound capacity, and account for the listed 36-inch kit length when planning installation.

Listed on Amazon as: NAZOU Trailer Tailgate Lift Assist Kit

#6 · One-Sided Spring Assist

6. Buyers EZ Gate 5201000

• Material: Alloy Steel
• Material Type: Alloy Steel
• Compatible with Vehicle Type: Truck

Best for: Repeated Open-Trailer Loading.

Why it ranks #6: This one-sided spring-assisted kit handles gates up to 180 pounds and claims to reduce lifting effort by up to 90%.

Buyers Products’ EZ Gate uses a spring-assisted design to reduce the effort required to raise and lower a trailer gate by up to 90%. Its one-side mounting leaves the opposite rail available, while the 180-pound capacity suits operators handling compatible open utility or landscape trailers during repeated loading.

The spring-assisted mechanism is rated to reduce lifting effort by up to 90%, a benefit for repeated loading and unloading. It mounts to one side of a compatible open trailer, leaving the other rail available, and the listing says it works with round or square side rails. Mounting hardware is included. The 180-pound gate limit and need to check rail shape, mounting area, and side-rail height are practical constraints to assess before installation.

Skip it if you need support for a gate above 180 pounds; Gledewen XLB10 lists a 400-pound maximum for gates or ramps.

This is a practical choice for repeated loading on an open utility or landscape trailer with compatible round or square rails. Check mounting space and rail height, and keep the gate within 180 pounds.

Listed on Amazon as: Buyers Products 5201000 EZ Gate Tailgate Assist, Reduce Physical Strain With Trailer Tailgates, Mounting Hardware Included, Handles gates up to 180lbs, Works On Most Standard Open Trailers

#7

7. Generic EZ Gate Assist

• Compatible with Vehicle Type: Trailer

Best for: Quieter Standard-Trailer Operation.

Why it ranks #7: The trailer-specific kit is rated for tailgates up to 180 pounds and includes mounting hardware, though its fit details are limited.

The Generic EZ Gate combines a spring insert intended to prevent rattling with a claimed reduction of up to 90% in lifting effort. Its 180-pound maximum and included mounting hardware provide concrete selection and installation details for owners of standard trailer tailgates.

The spring-assisted design is described as reducing the physical effort of raising and lowering a gate by up to 90%, while the no-rattle spring insert targets quieter operation. The kit is stated to handle tailgates up to 180 pounds, and mounting hardware is included for standard installation. The listing says it works on most standard trailers, but gives no specific rail dimensions, so the gate limit and trailer configuration remain important fit checks.

Skip it if you have a gate above 180 pounds; Gledewen XLB10 lists support for tailgates or ramps up to 400 pounds.

This kit suits owners of standard trailers seeking reduced lifting effort and quieter spring operation on a gate within 180 pounds. The listing gives no rail dimensions, so the trailer must suit its standard installation.

Listed on Amazon as: Generic EZ Gate Trailer Tailgate Assist, 180 lb

#8

8. Sidasu 180-lb Assist

• Material: Steel
• Material Type: Steel

Best for: Lightweight Trailer Gates.

Why it ranks #8: Its two-sided steel lift assist explicitly supports gates up to 180 pounds, a useful constraint for buyers with lighter ramps.

Sidasu’s two-sided lift assist has a clearly stated 180-pound capacity, making gate weight the first fit check for this heavy-duty steel kit. The steel construction and yellow powder-coated surface are listed material details, while the capacity warning emphasizes that heavier tailgates or ramps may affect performance and product longevity.

The two-sided configuration is intended to assist a trailer tailgate or ramp, while the 180-pound maximum gives buyers a direct limit to compare with their gate. Its heavy-duty thick-steel construction is cited as a durability feature, and the yellow powder finish provides the listed surface treatment. The product information specifically advises checking tailgate weight before installation; this makes weighing the gate an important part of deciding whether the kit is appropriate.

Skip it if you have a gate over 180 pounds; NAZOU DAC001 lists a 300-pound capacity for heavier utility-trailer gates.

Sidasu is for owners whose trailer tailgate or ramp weighs no more than 180 pounds and who want a steel two-sided kit. Weigh the gate first; exceeding the stated limit may affect performance and longevity.

Listed on Amazon as: 2-Sided Trailer Tailgate Lift Assist, Heavy Duty up to 180 lbs

#9

9. Rueekfil Two-Sided Assist

• Material: Iron, Metal
• Material Type: Iron, Metal

Best for: Four-to-Six-Foot Trailer Gates.

Why it ranks #9: The title identifies a two-sided system for open utility trailers and 4–6-foot gates, but no capacity limit appears in the supplied specifications.

Rueekfil’s two-sided ramp lift assist is specified for open utility trailers and four-to-six-foot gates, with one-hand operation called out in the title. Those details point to owners seeking assisted gate movement within that stated height range, though the supplied information does not give a load-capacity figure.

The two-sided arrangement and one-hand operation claim address the basic workflow of raising and lowering an open utility-trailer gate. The title specifies gates four to six feet tall, which gives buyers a dimensional check before considering the kit. Its listed 33-pound weight and iron-and-metal materials are relevant when planning handling and installation, but the provided specifications do not state a maximum gate weight, so capacity cannot be matched from this information.

Skip it if you require a stated capacity for a heavy gate; Gledewen XLB10 lists a 400-pound maximum for ramps and tailgates.

Rueekfil may suit an open utility-trailer owner with a four-to-six-foot gate who values the listed one-hand operation. Its supplied details omit a weight limit, leaving capacity suitability unresolved.

Listed on Amazon as: Tailgate Utility Trailer Gate Lift Assist System, 2-Sided Ramp Lift Assist for Open Utility Trailers, Easy One-Hand Operation, Fits 4-6ft Gates, Black

#10

10. MOTOQUEEN Right-Side Kit

• Material: Metal
• Material Type: Metal

Best for: Right-Hand Trailer Mounts.

Why it ranks #10: This trailer tailgate spring kit is explicitly right-hand mount, but the supplied data gives no capacity or detailed fit dimensions.

MOTOQUEEN’s right-hand-mount spring lift kit is intended to install on the side of a trailer rather than its top rail, making placement its defining fit detail. The listing describes compatibility with most utility and trailer tailgates, but does not provide a load limit or dimensional range for buyers to compare.

The right-side mounting designation helps owners identify the intended side of the trailer for installation, while the stated side placement distinguishes it from a top-rail setup. Its broad claim of fitting most utility and trailer tailgates offers a general application, but no capacity or rail-height measurements are supplied in the provided specifications. Buyers should therefore treat the right-hand location as the concrete selection point and avoid assuming a specific gate weight range from the listing.

Skip it if you need a published gate-weight limit before choosing; Buyers Products 5201000 specifies capacity up to 180 pounds.

Choose this kit when a right-hand, side-mounted spring assist matches your trailer layout. The listing describes broad tailgate compatibility but gives no load limit, so it does not establish a weight range for your gate.

Listed on Amazon as: Right Side Trailer Tail Gate Spring Lift Assist Kit (Right-Hand Mount)