Best Loading Ramps For Motorcycles: 10 Options Compared

#1 · Best Overall

1. VENDAV 7.5-Foot Motorcycle Ramp

• Dimensions: 88.98"L x 12.01"W x 2"H
• Weight: 15.5 lb
• Load Capacity: 750 lb
• Material: Aluminum

Best for: Narrow-load pickup owners.

Why it ranks #1: Purpose-built for single-track vehicles, it offers an 89-by-12-inch loading surface, 750-pound rating, and 15.5-pound listed weight.

An approximately 11-inch wheel path gives this VENDAV ramp a defined track for centered motorcycle and dirt-bike loading. Its single-ramp layout suits narrow, single-track equipment entering a pickup or trailer, while the aluminum construction and folding format make it a practical option for owners who carry a ramp for occasional loading.

The 89-by-12-inch ramp gives a motorcycle tire a dedicated path between side rails, helping keep a narrow load centered as it moves toward a pickup or trailer. Its 750-pound rating applies when weight is evenly distributed, so check the full equipment weight and loading setup against that limit. Aluminum construction and a 15.5-pound listed weight make the single ramp manageable to carry, and its folding design helps with transport and storage between loading trips.

Skip it if you need a single ramp rated above 750 pounds; the KOLOTOOL LR037 has a 900-pound rating.

For riders loading a motorcycle or dirt bike into a pickup or trailer, this ramp offers a defined single-track path and portable aluminum construction. Keep the total load within 750 pounds and distribute it evenly.

Listed on Amazon as: Motorcycle Ramp for Pickup Trucks, 7.5 ft Folding Aluminum Dirt Bike Ramp

#2 · Best Walking Steps

2. KOLOTOOL Walking-Step Ramp

• Dimensions: 81.2"L x 32.5"W x 2.5"H
• Weight: 22 lb
• Load Capacity: 900 lb
• Material: Aluminum

Best for: Solo motorcycle loaders.

Why it ranks #2: Its 81.2-by-32.5-inch dual-zone design combines a motorcycle track with walking steps, and it lists a 900-pound capacity.

Integrated walking steps alongside a dedicated motorcycle track let an operator walk beside the bike during loading. The KOLOTOOL ramp pairs that dual-zone layout with a 900-pound capacity and an anti-slip surface, addressing riders who want to control a motorcycle while keeping their footing off a narrow tire rail.

The 81.2-inch ramp is 32.5 inches wide, with a dedicated motorcycle path and built-in walking steps that let the operator accompany the bike rather than balance on a narrow rail. A 900-pound capacity accommodates loads within that rating, while the anti-slip surface supports traction during loading. Rubber-coated fingers help protect the tailgate from scratches, and the aluminum construction serves pickup loading as well as compatible powersports equipment such as ATVs and lawnmowers.

Skip it if you need a narrow ramp that stores in a compact space; the Gorkett LR036ZD-6FT folds to 37.8 inches long.

Choose this for motorcycle loading when walking beside the bike is central to your workflow, and when the 900-pound rating suits the load. Its wide, step-equipped form is a fit consideration for truck-bed and garage storage.

Listed on Amazon as: 81'' Aluminum Motorcycle Loading Ramp with Walking Steps, 900LBS

#3 · Best Traction Surface

3. VENDAV Punch-Plate Ramp

• Dimensions: 89"L x 12"W x 2"H
• Weight: 18.2 lb
• Load Capacity: 750 lb
• Material: Aluminum

Best for: Traction-focused bike loading.

Why it ranks #3: This 89-by-12-inch folding motorcycle ramp has a 750-pound rating and a raised punch-plate surface intended to provide tire grip.

A raised punched-plate surface gives this VENDAV ramp a traction-focused loading track for motorcycles and dirt bikes. The 89-by-12-inch, folding aluminum ramp is rated for 750 pounds when the load is properly distributed and the ramp is positioned and secured, making it a single-ramp option for pickup or trailer use.

The punched openings are raised to help provide tire grip as a motorcycle or dirt bike moves up the ramp, while the 89-by-12-inch surface supplies a defined single-track route. Its 750-pound rating depends on proper load distribution and correct positioning and securing, so the setup matters as much as the stated capacity. Welded aluminum construction and the folding format support repeated carrying and storage; compression testing in quality control is also specified as a strength check.

Skip it if you need integrated walking steps beside the bike; the KOLOTOOL LR037 has a dedicated operator step zone.

This suits a rider seeking a folding aluminum ramp with a punched traction surface for a motorcycle or dirt bike. Check load distribution, secure positioning, and the 750-pound limit before using it with a pickup or trailer.

Listed on Amazon as: Dirt Bike & Motorcycle Ramp for Pickup Trucks, 1 Pack

#4

4. MAXIVAMN Aluminum Motorcycle Ramp

• Dimensions: 89"L x 12"W x 2"H
• Weight: 7.2 kg
• Load Capacity: 750 lb
• Material: Aluminum

Best for: Everyday single-track hauling.

Why it ranks #4: The 89-by-12-inch single-track ramp is rated for 750 pounds and folds for storage, making it a direct-fit alternative for compatible motorcycles.

A 89-by-12-inch loading surface gives the MAXIVAMN ramp a defined wheel path for motorcycles and dirt bikes entering a pickup or suitable trailer. Its folding aluminum construction combines a single-track format with a 750-pound rating, suiting buyers who want a straightforward ramp for compatible equipment rather than a broad multi-wheel platform.

The 89-inch extended length and 12-inch width provide a dedicated track for centered motorcycle or dirt-bike tires, with the product guidance calling for tire-width checks and centered loading. Its 750-pound capacity sets a clear ceiling for compatible equipment, so weigh the complete load before use. Aluminum construction keeps the ramp material-specific, while the folding design helps with transport and storage after loading; the stated use includes pickup trucks and suitable trailers.

Skip it if you need walking steps beside the motorcycle; the KOLOTOOL LR037 includes a dedicated operator walking zone.

This is a practical match for motorcycle or dirt-bike owners who want a folding, single-track ramp for pickup or trailer loading. Center the tire, account for its width, and keep the total load within 750 pounds.

Listed on Amazon as: Motorcycle Ramp for Pickup Trucks, Aluminum Dirt Bike Ramp, 1 Pack

#5

5. TaiH Leo 7.5-Foot Ramp

• Dimensions: 46.1"L x 12"W x 5.9"H
• Weight: 16.5 lb
• Load Capacity: 750 lb
• Material: Aluminum

Best for: Arched aluminum bike loading.

Why it ranks #5: This aluminum, arched motorcycle and dirt-bike ramp has a 750-pound rating; its listed dimensions are 46.1 by 12 inches.

An arched aluminum ramp design distinguishes this TaiH Leo single-ramp option for loading motorcycles and dirt bikes into pickup trucks. Its listed 750-pound capacity and 12-inch width give buyers concrete load and surface parameters, while the product description specifies use across cold, rainy, and hot conditions.

The arched layout is described for motorcycle and dirt-bike loading, giving the ramp a shape intended for powersports use rather than a flat platform. Aluminum alloy is the listed material, and the stated 750-pound capacity sets the load limit to observe. At 12 inches wide, it provides a defined single-ramp surface for a pickup approach. The manufacturer also identifies use in cold, rainy, and hot weather, a relevant consideration for riders loading in varied conditions.

Skip it if you need two ramps in one set; the Evcitn GCT001 is supplied as a pair.

This TaiH Leo ramp fits riders seeking a single arched aluminum option for motorcycle or dirt-bike pickup loading. Keep the load within 750 pounds, and account for the one-ramp configuration when planning the loading method.

Listed on Amazon as: 7.5FT Aluminum Motorcycle Ramp, 1PC ATV Loading Ramps for Pickup Trucks

#6 · Longest Ramp

6. TaiH Leo 10-Foot Ramp

• Dimensions: 61.5"L x 17.7"W x 5.5"H
• Weight: 44 lb
• Load Capacity: 1500 lb
• Material: Aluminum

Best for: Long-reach truck loading.

Why it ranks #6: The unfolded ramp measures 120 by 17.7 inches and lists a 1,500-pound capacity, though the product notes recommend two pieces for most needs.

At 120 inches unfolded, this TaiH Leo aluminum ramp provides extended reach for loading motorcycles and dirt bikes into pickup trucks. Its 17.7-inch width and listed 1,500-pound capacity also suit other equipment named by the manufacturer, while the ramp folds to 61.5 inches for transport and storage.

The 10-foot unfolded length can provide a longer loading approach than a short ramp, while the 17.7-inch width gives the single ramp a broader surface. It folds to 61.5 inches, which changes the storage footprint between uses. The aluminum-alloy construction supports the listed 1,500-pound capacity, but the product description recommends two pieces for most needs. Consider that guidance when deciding whether one ramp is appropriate for the motorcycle and loading method.

Skip it if you want a two-ramp set included; the Evcitn GCT001 is supplied as a 2-pack.

This is suited to buyers who value a long approach and need a ramp for a motorcycle, dirt bike, or other listed equipment. Note that this is one ramp and the product recommends two pieces for most needs.

Listed on Amazon as: 10FT Motorcycle Ramp for Pickup Trucks, 1PC Aluminum Ramps for ATV/Dirtbike

#7 · Best Included Straps

7. Arejonner Folding Steel Ramps

• Dimensions: 71"L x 8.86"W x 3.5"H
• Weight: 34.1 lb
• Load Capacity: 1500 lb
• Material: Alloy Steel

Best for: Pair-ramp powersports haulers.

Why it ranks #7: The two-ramp set lists a 1,500-pound capacity and includes four safety straps and gloves, with a perforated traction surface.

A pair of ramps rated for 1,500 pounds combines a dense perforated surface with a sandblasted finish for motorcycle and powersports loading. Four safety straps are included to secure the ramps, while protective gloves support installation, giving buyers a two-ramp setup with traction and securing accessories in the package.

The dense perforations and sandblasted finish are specified to improve friction and load support, helping tires maintain traction during loading. Four safety straps provide a way to secure the ramps, and included gloves offer protection during installation. The pair is listed at 1,500 pounds capacity and is intended for motorcycles as well as ATVs, UTVs, and lawnmowers. Its 71-inch length and alloy-steel construction are relevant when planning the loading approach and handling the set.

Skip it if you want a lighter aluminum single ramp; the VENDAV B08GK8JJDV weighs 15.5 pounds.

This pair suits riders who want two ramps, traction-focused surfaces, and included securing straps for motorcycle or broader equipment loading. Account for the 34.1-pound listed weight and verify that the 1,500-pound pair rating suits the load.

Listed on Amazon as: 72.5" Heavy Duty Folding Loading Ramps with Sandblasted Finish, 1500lb Capacity, Ideal for Motorcycles, Lawn Mowers, ATVs, UTVs, and More – Pack of 2 with Safety Straps and Gloves

#8

8. Gorkett Folding Bike Ramp

• Dimensions: 72.4"L x 6.4"W x 2"H
• Weight: 8 lb
• Load Capacity: lb 440
• Material: Aluminum

Best for: Compact lightweight bike transport.

Why it ranks #8: At 8 pounds, this aluminum single-track ramp folds from 72.4 inches to 37.8 inches, but its 440-pound capacity limits suitable bikes.

Folding from 72.4 inches to 37.8 inches and weighing about 8 pounds, the Gorkett ramp prioritizes easy carrying and compact storage. Its narrow, single-track aluminum format is intended for bikes up to 440 pounds, making it a portable option for riders whose motorcycle fits the listed load and tire-width limits.

The 6.4-inch-wide track is intended for single-track vehicles, so tire width is an important fit boundary before loading. Its 440-pound capacity also sets a firm limit for the bike and equipment being moved. The aluminum ramp folds from 72.4 inches to 37.8 inches, reducing the storage length, and its 8.03-pound listed weight makes carrying it between a truck bed and garage less demanding than a heavier platform ramp.

Skip it if you need capacity above 440 pounds; the VENDAV B08GK8JJDV is rated to 750 pounds.

This ramp suits riders prioritizing low carry weight and compact storage for a compatible bike. Its 6.4-inch width and 440-pound capacity narrow the fit, so check tire width and total loading weight before use.

Listed on Amazon as: 6FT Folding Motorcycle Loading Ramp, 440 lb Aluminum Ramp for Bikes

#9

9. GarveeTech Tri-Fold Ramp

• Dimensions: 76.38"L x 49.61"W x 1.97"H
• Weight: 38.7 lb
• Load Capacity: 1500 lb
• Material: Aluminum

Best for: Wide-platform motorcycle loading.

Why it ranks #9: Its broad 76.38-by-49.61-inch aluminum platform folds to one-third size and lists 1,500-pound capacity, but is less motorcycle-specific.

A 50-inch-wide tri-fold surface creates a broad loading platform for motorcycles and other listed equipment, rather than a narrow single-track rail. This GarveeTech aluminum ramp measures about 76 inches long, carries a 1,500-pound total ramp capacity, and folds to one-third of its size for transport or storage.

The 50-inch width offers a broad surface for positioning equipment, while the treaded ramp design provides a specified traction feature during loading. At 76 inches long, it gives a loading approach suited to pickup trucks and trailers listed in the description. Aluminum construction keeps the ramp lighter than a steel alternative in material terms, and its tri-fold format reduces it to one-third of its size. The 1,500-pound total capacity and included load straps support planning and securing the setup.

Skip it if you need a lightweight narrow ramp for occasional bike loading; the Gorkett LR036ZD-6FT weighs about 8 pounds.

Consider this for motorcycle loading when a wide platform, fold-down storage, and 1,500-pound total capacity matter. Its 38.7-pound listed weight and broad footprint are important handling and storage considerations.

Listed on Amazon as: Aluminum Tri-Fold Ramp with Treads, Ramps for Pickup Trucks 76"x50"

#10

10. Evcitn Pair of Truck Ramps

• Dimensions: 78.7"L x 47.2"W x 7.5"H
• Weight: 36.4 lb
• Load Capacity: 1500 lb
• Material: Iron, Metal, Plastic, Stainless Steel

Best for: Two-ramp pickup loading.

Why it ranks #10: This 75-inch pair lists 1,500 pounds per pair and has a non-slip surface, but its broad multi-equipment format is less tailored to motorcycle loading.

A two-ramp set rated for 1,500 pounds per pair gives this Evcitn model a matched setup for motorcycles and other listed equipment. Its 75-inch ramps use textured treads and perforated, anti-slip surfaces, bringing traction-focused construction to pickup loading for dirt bikes, ATVs, UTVs, and lawnmowers.

The 75-inch pair creates two loading paths, while the textured treads and perforated design are specified to provide an anti-slip surface. Reinforced construction and professional welding support the stated 1,500-pound capacity per pair, so the rating applies to the combined set rather than each ramp. The listed materials include iron, metal, plastic, and stainless steel; at 36.4 pounds, the pair’s weight matters when carrying and storing it between pickup loading jobs.

Skip it if you need a single narrow aluminum ramp; the VENDAV B08GK8JJDV is a one-piece aluminum option.

This set fits riders who want a pair of traction-surfaced ramps for motorcycle or broader powersports loading. Treat 1,500 pounds as the combined pair capacity, and consider the listed 36.4-pound weight when planning handling and storage.

Listed on Amazon as: Truck Ramps 75" 1500 LBS 2 Pack, Extra Heavy Duty Loading Ramps for Lawn Mower, Portabe Non Slip Motorcycle Ramps for Pickup Trucks, ATV, Dirt Bikes, UTV