Best Lug Nuts For Semi Trucks: Compare 10 M22x1.5 Options

#1 · Best Overall

1. PSGSP Flange Lug Nuts

• Material: Carbon Steel
• Thread Size: M22-1.5
• Inside Thread Size: M22 x 1.5
• Size Name: Flanged Nuts-M22x1.5

Best for: Hub-piloted Class 8 wheels.

Why it ranks #1: Explicitly fits Class 8 hub-piloted aluminum or steel wheels, uses M22x1.5 threads, and includes hand-tightening and re-torque guidance.

Class 8 hub-piloted fitment for aluminum or steel wheels is the defining application of these PSGSP flange nuts. The M22x1.5, carbon-steel set is listed for Alcoa, Accuride, and other wheel makers, with a two-piece flange and explicit hand-tightening and re-torque guidance for installation.

The listed Class 8 application covers aluminum or steel wheels using a hub-piloted mounting system, helping buyers focus on the specified wheel arrangement. PSGSP also names Alcoa and Accuride wheels, alongside other makers. Its two-piece flange design supports fastening the wheels, while the installation guidance calls for hand tightening in a star pattern, following the truck maker’s torque specification, then re-torquing after 50 to 100 miles. The listing says not to use impact tools.

Skip it if you require impact-tool installation; TIROL T28958XS lists its nut specifications without a no-impact instruction.

Choose these for a Class 8 truck with hub-piloted aluminum or steel wheels when the stated installation procedure suits your shop. The hand-tightening, star-pattern, and re-torque steps are important operating boundaries.

Listed on Amazon as: Flange Lug Nuts for Semi Truck, Hub Piloted, M22x1.5, Black, 10pcs

#2 · Grade 10.9 Option

2. TIROL Two-Piece Flange Nuts

• Material: Carbon Steel
• Thread Size: M22 x 1.5
• Inside Thread Size: M22
• Size Name: M22x1.5

Best for: Salt-exposed steel wheel operators.

Why it ranks #2: Lists M22x1.5 threads, ASTM Class 10.9 and SAE Grade 8, plus a 450–500 ft/lbs torque figure and black phosphate coating.

TIROL specifies a black phosphate surface treatment and a 72-hour salt-spray test, making corrosion protection a key consideration for this heavy-duty truck hardware. The M22x1.5 two-piece nuts have a 19mm sleeve and are listed for Class 8 steel single wheels with hub-piloted mounting.

The black phosphate coating and stated 72-hour salt-spray test give buyers specific surface-treatment information when selecting hardware for exposure to corrosive conditions. TIROL lists Class 8 steel single wheels with hub-piloted mounting, which narrows the intended application. The M22x1.5 thread, 19mm sleeve, and 33mm hex identify key fit dimensions, while the stated torque range is 450–500 ft/lbs. Check those specifications against the truck and wheel requirements before installation.

Skip it if you run dual wheels; LLYZFED’s 28mm sleeve nuts are listed for dual aluminum and mixed steel-and-aluminum setups.

TIROL is for operators seeking specified corrosion treatment and fitment for hub-piloted Class 8 steel single wheels. Its stated 19mm sleeve and torque range provide useful checks, but the single-wheel application is the central boundary.

Listed on Amazon as: TIROL 10PCS M22x1.5 Two-Piece Flange Wheel Lug Nuts, 33mm Hex Semi Nuts, 6mm Short Sleeve Nuts for Heavy Duty Truck, Semi Truck Fit Aluminum or Steel Wheels, with Hub Piloted Seat and 26mm Bolt Hole

#3 · Broad Axle Fit

3. Camotokiit 20-Piece Nuts

• Material: Grade 10 Steel
• Thread Size: M22-1.5 x 33mm
• Inside Thread Size: M22
• Size Name: M22-1.5 x 33mm

Best for: Mixed-wheel axle replacements.

Why it ranks #3: Grade 10 steel and a 20-piece set suit several listed axle and wheel combinations, including aluminum steer wheels and steel dual wheels.

Grade 10 steel construction is the key draw of these Camotokiit two-piece nuts, supporting heavy-duty wheel fastening across several listed axle and wheel configurations. Their M22-1.5 thread and 19mm sleeve suit specified steer, drive, and trailer setups, while the 20-piece quantity supports a larger replacement job.

The listing specifies aluminum wheels on steer axles, aluminum single wheels on drive or trailer axles, and steel outer/inner dual wheels, giving buyers a defined range of configurations to check against. M22-1.5 threads and a 33mm hex identify the fastening dimensions, while the 19mm sleeve and 26mm bolt-hole fitment help narrow the application. Grade 10 steel is the stated material, and the two-piece design uses a flange. The 20-piece set suits broader replacement needs.

Skip it if you need a stated torque value for installation; PSGSP’s flange nuts include hand-tightening and re-torque guidance.

For operators replacing nuts across listed steer, drive, or trailer axle configurations, this 20-piece set offers Grade 10 steel and a two-piece flange. Check the stated thread, sleeve, and wheel setup before ordering.

Listed on Amazon as: 20PCS Two-Piece 19mm Sleeve Flanged Wheel Lug Nuts, M22x1.5 Hex 33mm for Heavy Duty Truck Semi Truck Fit Steel Dual Wheels with Hub Piloted Seat & 26mm Bolt Hole Size (20)

#4

4. FETUSI 20-Piece Nuts

• Material: Alloy Steel
• Thread Size: M22x1.5
• Inside Thread Size: M22
• Size Name: M22x1.5

Best for: Larger Class 8 replacement batches.

Why it ranks #4: Its 20-piece set specifies M22x1.5 threads and 19mm sleeves, with stated fitment for Class 8 trucks using hub-guided aluminum or steel wheels.

FETUSI combines a 20-piece quantity with a listed Class 8 application, making this set a practical candidate for a larger replacement batch. Its M22x1.5 thread and 19mm sleeve are specified for heavy-duty trucks with aluminum or steel wheels using a hub-guided installation system.

The stated fitment spans Class 8 heavy-duty trucks with aluminum or steel wheels and a hub-guided installation system, with medium trucks, mining trucks, and buses also named as uses. M22x1.5 threads and a 19mm sleeve define important fit dimensions, while the 20-piece quantity supports replacing more nuts in one job. Alloy steel is the stated material. Compare the wheel arrangement and dimensions with the existing hardware, since the listing asks buyers to check the application.

Skip it if you need a stated torque value for installation; PSGSP’s flange nuts include hand-tightening and re-torque guidance.

FETUSI suits operators preparing a larger replacement batch for listed heavy-duty, medium, or mining trucks and buses. Its broad wheel-material description is useful, while the M22x1.5 thread and 19mm sleeve remain essential fit checks.

Listed on Amazon as: 20PCS Two-Piece 19mm Sleeve Wheel Lug Nuts Fit for Heavy Duty Semi Trucks, M22x1.5 Hex 33mm Fit Steel Dual Wheels with Hub Piloted Seat, 26mm Bolt Hole Size, Black

#5

5. Camotokiit 12-Piece Nuts

• Material: Grade 10 Steel
• Thread Size: M22-1.5
• Inside Thread Size: M22-1.5
• Size Name: M22-1.5 x 33mm

Best for: Smaller mixed-axle replacements.

Why it ranks #5: Grade 10 steel, M22x1.5 threads, and stated aluminum steer-wheel and steel dual-wheel applications make this a smaller-count alternative.

Camotokiit’s 12-piece set uses Grade 10 steel and a two-piece design for listed heavy-duty wheel applications, making quantity its key distinction from the brand’s larger set. M22-1.5 threads and a 19mm sleeve suit specified aluminum and steel wheel arrangements across steer, drive, and trailer axles.

The listed applications include aluminum wheels on steer axles, aluminum single wheels on drive or trailer axles, and steel outer/inner dual wheels, giving buyers several configurations to evaluate. Grade 10 steel is the stated material, and the 19mm sleeve pairs with M22-1.5 threads for the specified fastening setup. A 33mm hex helps identify the drive size. The 12-piece quantity is suited to a smaller replacement batch, not a broader 20-nut change.

Skip it if you need 20 nuts in one set; Camotokiit M22-1.5 two-piece nuts are listed in a 20-piece quantity.

This set fits buyers addressing a smaller job across the listed steer, drive, or trailer wheel arrangements. Its Grade 10 steel and 19mm sleeve are useful specifications, while the 12-piece quantity limits its reach for larger replacements.

Listed on Amazon as: Two-Piece 19mm Sleeve Flanged Wheel Lug Nuts, M22x1.5 Hex 33mm for Heavy Duty Truck Semi Truck Fit Steel Dual Wheels with Hub Piloted Seat & 26mm Bolt Hole Size (12)

#6 · Longer Sleeve

6. LLYZFED 28mm Sleeve Nuts

• Material: Carbon Steel
• Thread Size: M22x1.5
• Inside Thread Size: M22
• Size Name: 28 MM

Best for: Mixed aluminum dual-wheel setups.

Why it ranks #6: The 28mm sleeve is specified for dual aluminum or mixed steel-and-aluminum setups, with hub-piloted mounting and 26mm bolt holes.

A 28mm sleeve distinguishes this LLYZFED two-piece set from the listed 19mm sleeve options, making sleeve length a central fit consideration. The nuts are specified for hub-piloted Class 8 trucks with 26mm bolt holes, including dual aluminum wheels or mixed steel-and-aluminum arrangements.

The listing connects the 28mm sleeve and washer-integrated two-piece design with increased clamping strength, load distribution, and reduced wheel-seat wear. That combination is intended for dual Alcoa aluminum wheels or mixed setups using one steel and one aluminum wheel. M22x1.5 threads and a 33mm hex provide the stated fastening dimensions, while the 26mm bolt-hole specification narrows compatibility. The 10-piece quantity suits a limited replacement batch rather than a broad multi-wheel change.

Skip it if you need 20 nuts for a broader replacement; FETUSI’s two-piece 19mm sleeve set is supplied as 20 pieces.

This set is for Class 8 operators whose hub-piloted dual-wheel arrangement calls for the listed 28mm sleeve, especially mixed steel-and-aluminum setups. Confirm the sleeve and bolt-hole dimensions against the wheel configuration before choosing it.

Listed on Amazon as: 10 Pack Two-Piece 28mm Sleeve Wheel Lug Nuts Fit for Heavy Duty Semi Trucks

#7 · Corrosion-Coated

7. BTXKQTH Sleeve Flange Nuts

• Material: Carbon Steel
• Thread Size: M22-1.5 x 19mm
• Inside Thread Size: M22
• Size Name: 19 MM

Best for: Corrosion-conscious trailer owners.

Why it ranks #7: Carbon-steel M22x1.5 nuts are listed for semi-trailers, steel dual wheels, and aluminum super singles; the listing describes a black oxide coating.

A black oxide coating with a stated 300% higher salt-corrosion resistance gives this BTXKQTH set a specific advantage for wet, coastal, or cold operating conditions. The carbon-steel, two-piece nuts use M22x1.5 threads and are listed for heavy-duty semi-trailers with 26mm bolt holes.

The blueing-process black oxide coating is presented as providing higher salt-corrosion resistance, a practical consideration for trucks operating in wet, coastal, or cold environments. Carbon steel supplies the stated construction, while the two-piece design is intended for heavy-duty semi-trailers. Compatibility is listed for steel dual wheels and aluminum super singles with 26mm bolt holes. The 10-piece quantity suits a smaller replacement batch; verify that the M22x1.5 thread and wheel arrangement match the application.

Skip it if you need 20 nuts in one set; Camotokiit M22-1.5 two-piece nuts are listed in a 20-piece quantity.

This set suits owners of heavy-duty semi-trailers seeking corrosion-conscious hardware for listed steel dual-wheel or aluminum super-single setups. Its 10-piece quantity and 26mm bolt-hole application are important boundaries when planning a full axle replacement.

Listed on Amazon as: 10 Pcs 19mm Sleeve Flanged M22x1.5 Wheel Nuts 33mm Hex Carbon Steel Set

#8

8. Chumia Flanged Wheel Nuts

• Material: Carbon Steel
• Thread Size: M22-1.50
• Inside Thread Size: M22
• Size Name: M22 x 1.5

Best for: Bulk commercial-vehicle replacements.

Why it ranks #8: A 20-piece M22x1.5 carbon-steel set offers a useful replacement quantity, though its listing gives less specific wheel and hub fitment detail.

A 20-piece quantity makes Chumia’s M22 x 1.5 flanged nuts suited to bulk replacement needs across commercial vehicles, trucks, buses, and trailers. Their carbon-steel construction and 32mm hex and height measurements give buyers concrete specifications for planning a compatible fastener change.

Chumia lists compatibility with commercial vehicles, trucks, buses, and trailers, so the set addresses more than a single stated vehicle category. The M22 x 1.5 thread and approximately 32mm across-flats measurement help identify the fastening dimensions, while the approximately 32mm overall height and 45mm bottom flange diameter add further comparison points for existing hardware. Carbon steel is the stated material. With 20 nuts included, the set supports bulk replacement, subject to matching the application.

Skip it if you need explicit hub-piloted wheel fitment; PSGSP’s M22x1.5 flange nuts specify Class 8 hub-piloted aluminum or steel wheels.

Chumia suits buyers planning a bulk change across a listed commercial vehicle, truck, bus, or trailer application. Its dimensions are detailed, but buyers needing a named wheel material or mounting system should prioritize products that state those particulars.

Listed on Amazon as: Chumia 20 Pack Wheel Nut M22 x 1.5 Flanged Hub Lug Nuts 32mm Hex 32mm Height Carbon Steel Black Metric Fasteners for Semi Trucks Trailers

#9

9. Camotokiit 39mm Sleeve Nuts

• Material: Alloy Steel
• Thread Size: M22-1.5
• Inside Thread Size: M22-1.5
• Size Name: M22-1.5 X 39mm

Best for: Rear dual-axle sleeve replacements.

Why it ranks #9: The 39mm sleeve and Class 8 rear-drive or trailer dual-assembly application are specific, but the six-piece quantity limits coverage.

The 39mm sleeve length sets this Camotokiit nut apart and targets rear drive or trailer axles running dual assemblies. Its M22-1.5 thread is listed for Class 8 commercial vehicles from Freightliner, Volvo, Kenworth, Peterbilt, International, and Mack, with six nuts in the pack.

Camotokiit specifically assigns these sleeve nuts to rear drive or trailer axles with dualed assemblies, which helps prevent choosing them for a different axle position. The 39mm sleeve length is the key dimensional distinction, paired with an M22-1.5 thread for the listed commercial applications. The named truck manufacturers provide useful application context, while the six-piece quantity is suited to a smaller replacement need. Check the axle arrangement and sleeve dimension against the existing hardware.

Skip it if you need a larger single-set quantity; Camotokiit’s M22-1.5 two-piece 19mm sleeve nuts come in a 20-piece pack.

These suit buyers replacing sleeve nuts on a listed Class 8 rear drive or trailer axle with dualed wheels. The 39mm sleeve and six-piece quantity are key boundaries; match both to the existing assembly.

Listed on Amazon as: 6 Pack 33mm M22-1.5 x 39mm Sleeve Wheel Lug Nut M22-1.5x39mm Skirt Flange

#10

10. Dorman 611-0030.10 Nuts

• Material: Alloy Steel
• Thread Size: M22-1.50
• Inside Thread Size: M22
• Size Name: M22-1.50, 30.48 mm

Best for: Specified-vehicle replacement work.

Why it ranks #10: This 10-pack has M22-1.50 threads and alloy-steel construction, but its universal-fit description does not establish semi-truck hub or wheel compatibility.

Dorman identifies these nuts as direct replacements intended to match original-equipment fit, function, and performance on specified vehicles. The M22-1.50 alloy-steel hardware has a 33mm hex and 30.48mm length, giving repairers concrete dimensions to compare with the vehicle’s existing wheel fasteners.

The direct-replacement positioning makes this a candidate for repair work where the original-equipment application is known, while the listed dimensions help check the match before installation. Alloy steel is the stated material, and the external 33mm hex provides the drive interface. The 10-nut assortment is suited to a limited replacement job rather than a larger multi-wheel batch. Dorman advises checking product dimensions and details to select the right nut for the application.

Skip it if you are replacing 20 nuts at once; Camotokiit M22-1.5 two-piece nuts are supplied in a 20-piece set.

Repair professionals and owners with a specified vehicle application may value Dorman’s direct-replacement positioning and defined dimensions. The 10-piece assortment is a limited quantity, and application matching remains essential before fitting.

Listed on Amazon as: Dorman 611-0030.10 M22-1.50 Wheel Nut Metric- 33mm Hex, 30.48 mm Length, 10 Pack Universal Fit