Best Motorcycle Carrier For RV: 10 Hitch-Mount Options Compared

#1 · Best Overall

1. Black Widow Steel Carrier

• Load Capacity: 600 lb
• Material: Steel
• Compatible with Vehicle Type: Off-Road Motorcycle…
• Weight: 98 lb

Best for: Heavy-bike steel hauler.

Why it ranks #1: Its 600-pound capacity, Class III or IV 2-inch receiver fit, wheel chock, and grit-coated steel track make it the most fully specified heavy-duty option.

A 600-pound capacity gives the Black Widow MCC-600 room for heavier motorcycles, dirt bikes, and scooters on a Class III or IV 2-inch hitch. Its grit-coated track and ramp add traction during loading and unloading, while the steel construction makes this a substantial alternative to a lightweight aluminum rack.

The 14-gauge powder-coated steel frame supports loads up to 600 pounds, making capacity the main draw for buyers transporting heavier bikes. Grit coating on both the track and ramp provides a traction surface as the motorcycle is rolled on or off. The ramp attaches to the carrier’s right side, so the loading approach is fixed rather than reversible. At 98 pounds, the carrier itself is also a considerable item to handle during installation or storage.

Skip it if you need a lighter rack to handle; the Black Widow AMC-400 uses aluminum and has a 400-pound capacity.

Choose this for a Class III or IV 2-inch hitch and a bike that benefits from its 600-pound rating and traction-coated loading surfaces. Its 98-pound weight is a practical handling consideration for RV owners.

Listed on Amazon as: Black Widow Steel Motorcycle Hitch Carrier, Wheel Chock, 600 lb, 2 In Hitch

#2 · Long Ramp

2. VEVOR 600 lb Carrier

• Load Capacity: 600 lb
• Material: Q235B Steel
• Compatible with Vehicle Type: Car
• Weight: 61.7 lb

Best for: Long-ramp 600-pound carrier.

Why it ranks #2: The 600-pound steel carrier lists a 47-inch longer ramp in its title and a 76-by-7-inch platform, useful when loading access is a priority.

The VEVOR carrier pairs a 600-pound rating with a 47-inch ramp, giving owners a substantial steel hitch rack and an extended loading surface for motorcycles, scooters, or dirt bikes. Its 76-by-7-inch carrier space provides room for positioning a bike, while the listed installation-height range gives buyers a specific setup boundary.

Q235B steel supports the stated 600-pound capacity, and the 76-by-7-inch carrier space gives a bike room to sit on the rack. The 47-inch ramp is intended to make loading and unloading easier, while included ratchet straps and a stabilizer add securing components to the transport workflow. The product lists a recommended center-hole-to-ground installation height of 7.87 to 19.7 inches, so RV owners should account for that range when evaluating their hitch setup.

Skip it if you need a carrier specified for a different hitch-height range; Mockins MA-HM-DBC-83-TLTS-96 has an 83-inch frame and 500-pound capacity.

This suits RV owners seeking a 600-pound steel carrier with an extended ramp and included securing accessories. Its stated installation-height range is an important boundary, so compare that measurement with the vehicle’s hitch position.

Listed on Amazon as: VEVOR Motorcycle Carrier, 600 LBS Steel Motorcycle Carrier Hitch Mount with 47" Longer Ramp, Scooter Dirt Bike Trailer Hauler with Ratchet Straps and Stabilizer, for Car, Truck with 2" Hitch Receiver

#3 · Tilting Ramp

3. Mockins Tilting Carrier

• Load Capacity: 500 lb
• Material: Steel
• Compatible with Vehicle Type: Car, Truck, Van
• Weight: 75 lb

Best for: Tilting rack for wide tires.

Why it ranks #3: This 500-pound steel carrier has an 83-inch platform, a tilting ramp, and listed stabilizer, hitch lock, and straps.

A tilting ramp is the defining feature of Mockins’ 83-inch carrier, intended to make mounting and dismounting more convenient for motorcycles, dirt bikes, scooters, and e-bikes. The steel rack supports up to 500 pounds and accommodates tires up to 5.5 inches wide, combining a broad stated tire limit with a 2-inch receiver fit.

The 83-by-6-inch steel frame provides a long platform, and the tilting ramp supports the loading workflow without requiring a separate ramp to be listed. Its 5.5-inch maximum tire width suits fat-tire bikes within that boundary, while the 500-pound capacity sets the load limit. The package includes a hitch stabilizer, hitch lock, license plate holder, four ratchet straps, and four loop straps, covering several securing and installation needs in one carrier kit.

Skip it if you need capacity above 500 pounds; the VEVOR TD-1004-03 is rated for 600 pounds.

A practical option for RV owners with a 2-inch receiver who want a tilting ramp and tire clearance up to 5.5 inches. Keep the bike’s weight within 500 pounds and account for the 83-inch frame.

Listed on Amazon as: Mockins 83" Tilting Motorcycle Hitch Carrier with Ramp w/ 500 Lbs. Capacity

#4

4. VEVOR 500 lb Carrier

• Load Capacity: 500 lb
• Material: Carbon Steel
• Compatible with Vehicle Type: Car
• Weight: 70.6 lb

Best for: Anti-tilt 500-pound carrier.

Why it ranks #4: Its 500-pound carbon-steel frame includes an anti-tilt lock device, and the 83.46-inch overall length offers a long listed platform format.

An anti-tilt lock device is the key feature of this VEVOR carrier, intended to help hold the rack steady while transporting motorcycles, scooters, or e-bikes. Its 83.46-inch steel frame supports up to 500 pounds, and a powder-coated finish adds stated resistance to corrosion and wear for outdoor use.

The carbon-steel construction and powder-coated finish are specified to resist deformation, corrosion, and wear, supporting repeated outdoor use. An anti-tilt lock device addresses carrier movement at the hitch, while the 500-pound rating sets a clear limit for the bike being transported. At 83.46 by 36.22 by 15.35 inches, the rack also needs room for handling and storage; the listed package includes an accessory kit and user manual alongside the carrier.

Skip it if you need a 600-pound rating; the VEVOR TD-1004-03 supports 600 pounds and includes a 47-inch ramp.

This fits RV owners seeking a steel carrier with an anti-tilt device and corrosion-resistant finish for loads up to 500 pounds. Its 83.46-inch length and listed capacity are the main fit considerations.

Listed on Amazon as: VEVOR 83" Motorcycle Carrier, 500 lbs Capacity, Heavy Duty Steel Hitch Mount Rack with Anti-Tilt Lock Device, Scooter Dirt Bike Trailer Hauler for Car Truck with 2-Inch Hitch Receiver

#5

5. Goplus 600 lb Carrier

• Load Capacity: 600 lb
• Material: Steel
• Compatible with Vehicle Type: vehicle with 2" receiver
• Weight: 98 lb

Best for: 600-pound wide-tire hauler.

Why it ranks #5: It carries up to 600 pounds and is listed for tires up to 7.5 inches wide, though its description recommends not exceeding 55 mph.

A 600-pound capacity and tire fit up to 7.5 inches wide give the Goplus carrier room for heavier bikes and broader tires than many listed hitch racks. Its steel construction and loading ramp support the basic hauling workflow, while the supplied guidance recommends staying at or below 55 mph when carrying a motorcycle.

The steel frame is described as high-strength and tough, with the product also stating that it will not rust in rain. Its 600-pound rating gives a clear load ceiling, and the stated 7.5-inch tire limit helps buyers assess wheel fit before loading. A loading ramp and two straps are listed in the title, supporting loading and bike securing. The supplied speed guidance recommends not exceeding 55 mph, with actual speed adjusted according to motorcycle weight.

Skip it if you need a carrier rated above 600 pounds; the Mockins MA-HM-DBC-83-TLTS-96 is rated for 500 pounds, so it does not meet that need either.

This suits RV owners whose bike fits the 600-pound and 7.5-inch limits and who can follow the listed 55-mph guidance. Its steel frame, ramp, and two straps cover the stated hauling basics.

Listed on Amazon as: Goplus Motorcycle Hitch Carrier, 600LBS Motorcycle Carrier Hitch Mount with 2 Straps, Loading Ramp, Dirt Bike Trailer, Heavy Duty Motor Cycle Rack, Fit Up to 7.5” Wide Tire

#6

6. ECOTRIC 600 lb Carrier

• Load Capacity: 600 lb
• Material: steel
• Compatible with Vehicle Type: Dirt Motorcycle

Best for: Rust-resistant 600-pound rack.

Why it ranks #6: The steel carrier is rated for 600 pounds and has a rustproof coating, but the supplied details offer less information about ramp and restraint features.

A rustproof coating and 600-pound load rating make this ECOTRIC steel carrier a candidate for owners hauling heavier motorcycles in wet conditions. Its stated capacity reaches beyond light bikes, while the steel construction provides the carrier’s core support. The supplied listing identifies the carrier mount as an included component.

The steel frame is described as strong enough to carry a bike firmly, and the rustproof coating is intended to support use in rainy conditions. A 600-pound maximum gives buyers a defined upper load limit that can accommodate more than light motorcycles, according to the supplied description. The listing does not specify a ramp, receiver class, or tire-width range, so this model’s documented advantages center on capacity and coated steel rather than a detailed loading setup.

Skip it if you want documented ramp and hitch details; Black Widow MCC-600 lists a right-side ramp and Class III or IV 2-inch fit.

Consider this ECOTRIC for an RV owner prioritizing a 600-pound steel carrier with a coating described as rustproof. The available details do not establish ramp or receiver specifications, which are important boundaries for planning installation and loading.

Listed on Amazon as: ECOTRIC 600LBS Black Motorcycle Carrier Mount Dirt Bike Rack Hitch Hauler |

#7

7. ECOTRIC 500 lb Carrier

• Load Capacity: 500 lb
• Material: Steel
• Compatible with Vehicle Type: Vehicle with 2" square receiver (class II…

Best for: Broad receiver-class compatibility.

Why it ranks #7: It supports 500 pounds, fits a range of 2-inch square receiver classes, and allows loading from either side with its included ramp.

Compatibility with 2-inch square Class II, III, IV, or V receivers gives this ECOTRIC carrier a wider listed hitch-class range than models limited to Class III or IV. It supports up to 500 pounds and includes a ramp, with loading possible from either side to suit different approaches around the vehicle.

The high-strength steel frame is described as resisting flaking, scratching, fading, and wear, which supports durability during regular transport. Its ramp allows bikes to be loaded onto the carrier, and the two-sided loading option offers flexibility when positioning the vehicle or rack. The 500-pound capacity defines the payload limit, while the listed fit across Class II through V applies to 2-inch square receivers. Installation instructions and mounting hardware are included.

Skip it if you need a 600-pound load rating; Goplus AT4338+XIN supports up to 600 pounds and fits a 2-inch receiver.

A useful choice for RV owners with a 2-inch square receiver across the listed hitch classes who want two-sided loading. Keep the bike within 500 pounds and check that the vehicle’s receiver is the specified size.

Listed on Amazon as: ECOTRIC 500LB Hitch Mount Motorcycle Carrier Transportation Racks Hitch

#8

8. Mockins Tilting Carrier

• Load Capacity: 500 lb
• Material: Steel
• Compatible with Vehicle Type: Car, Truck, Van
• Weight: 78 lb

Best for: Tilting rack for fat tires.

Why it ranks #8: This separate 500-pound listing includes a tilting ramp, hitch stabilizer, hitch lock, and four ratchet plus four loop straps.

Mockins’ tilting ramp and 5.5-inch tire-width limit make this 83-inch carrier a fit for owners transporting fat-tire e-bikes, dirt bikes, or scooters within its 500-pound capacity. It mounts to a 2-inch receiver and includes a hitch stabilizer and lock, addressing both loading and hitch-security needs in the package.

The 83-by-6-inch steel frame provides the listed platform dimensions, while the tilting ramp is intended to simplify mounting and dismounting. Tire clearance reaches 5.5 inches, a concrete fit boundary for fat-tire bikes, and the carrier’s 500-pound rating limits the combined load. Four heavy-duty ratchet straps and four loop straps are included for securing the bike; the hitch stabilizer and lock add further supplied hardware for the receiver connection.

Skip it if you need a 600-pound capacity; Goplus AT4338+XIN is rated for 600 pounds and fits a 2-inch receiver.

Choose this for an RV with a 2-inch receiver and a bike whose tire width is within 5.5 inches and weight within 500 pounds. The tilting ramp and supplied straps support loading and securing.

Listed on Amazon as: Mockins 83" Tilting Dirt Bike Carrier Hitch Mount Rack w/ 500 Lbs. Capacity

#9

9. IRILIA Tilting Carrier

• Load Capacity: 500 lb
• Material: Steel
• Compatible with Vehicle Type: Dirt Bike
• Weight: 60 lb

Best for: Tilting carrier for narrow tires.

Why it ranks #9: It has a 500-pound rating, 79-by-6-inch platform, tilting ramp, and stated 2-inch receiver fit, but its tire-width limit is 4.3 inches.

The tilting ramp on this IRILIA carrier is intended to make loading easier, while its 79-by-6-inch platform supports motorcycles, dirt bikes, scooters, and e-bikes on a 2-inch receiver. Its 500-pound rating and 4.3-inch maximum tire width set clear limits for choosing a bike to carry.

The 79-inch loading platform provides the stated length for positioning a bike, and the tilting ramp supports the loading process. Compatibility with standard 2-inch hitch receivers covers the listed setup for cars, SUVs, and trucks, while the 500-pound load rating limits the combined bike weight. Fat tires up to 4.3 inches wide are specified, making tire measurement an important fit check for e-bikes or other wider-wheel models.

Skip it if you need clearance for tires wider than 4.3 inches; Mockins MA-HM-DBC-83-TILT-96 accommodates tires up to 5.5 inches.

This is suited to RV owners with a 2-inch receiver who want a tilting ramp for a bike within the 500-pound and 4.3-inch tire limits. Measure tire width and platform needs before selecting it.

Listed on Amazon as: Tilting Motorcycle Hitch Carrier with Ramp

#10

10. Black Widow Aluminum Carrier

• Load Capacity: 400 lb
• Material: Aluminum
• Compatible with Vehicle Type: Motorcycle

Best for: Compact aluminum e-bike hauler.

Why it ranks #10: Its aluminum construction and ramp suit lighter loads, but the 400-pound capacity is the lowest listed and provides less headroom for heavier motorcycles.

The aluminum frame keeps this Black Widow carrier focused on hauling up to 400 pounds without a bulky trailer. Its roll-on ramp can attach on either side, giving riders a choice of loading approach, then secures flat against the carrier for more compact storage when the bike is unloaded.

A Class III or IV 2-inch receiver is the stated fit, so this carrier suits vehicles with that hitch setup. The ramp’s reversible placement lets you load from either side, while its flat storage position keeps the ramp with the rack between trips. The included anti-rattle device helps minimize movement during transport, and the aluminum construction keeps the carrier’s material distinct from the steel options. Its 400-pound limit is the key capacity boundary for bike selection.

Skip it if you need capacity above 400 pounds; the Black Widow MCC-600 supports up to 600 pounds.

A good match for RV owners hauling an e-bike or motorcycle within the 400-pound limit who value a reversible, stowable ramp. Check that the vehicle has a Class III or IV 2-inch receiver before choosing it.

Listed on Amazon as: Black Widow Aluminum Motorcycle Hitch Carrier with Ramp for eBike, 400 lb